he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
r graphics get saved as 24x24 pixel images before they are put into the grasshopper application, which means the icons look like crap when you zoom in. This is the aforementioned problem that needs to be addressed in GH2. There have historically been two approaches to this issue:
Provide pixel images with several sizes.
Render vector graphics directly.
Option 1 is common for apps that do not have variable levels of zoom, such as Windows Explorer. When explorer shows file icons it either shows them in 16x16, 32x32, 48x48, 96x96, or these days, various HUGE sizes. As a result *.ico files allow you put in different images for all these target sizes. Since Grasshopper has variable zoom levels, this is not an ideal solution. Also, it requires a lot more work per icon.
Option 2 is becoming more and more popular as increased graphics speed now allows for the real-time rendering of vector graphics. Yet, you still need a renderer that knows how to draw vector geometry crisply at low sizes. All vector renderers I know just interpolate the geometry linearly and if a line happens to end up 'between pixels' it's just fuzzy.
I don't have hard and fast rules for the icons, but I try to adhere to at least these:
Keep a border of 2 pixels free around the icon content. So basically only use the inner 20x20 pixels rather than the 24x24 you're allowed. This is needed because the drop shadow needs to go there.
Only draw silhouette edges around shapes, not inner creases. Typically a 1-pixel line will do. I prefer to use a dark version of the fill colour rather than black for edges.
Loose curves can be drawn in 1 or 2 pixel thicknesses, depending on how important the curve is.
Try to avoid text in your icons (not always possible).
Stick to 1 colour family per icon, preferably per icon family. You can add highlights with another colour if you must, but too many hues make an icon hard to read (for the example the [Voronoi] icon, it has red, green and blue and it's a bit of a mess, on the other hand [Colour Wheel] has the full spectrum and seems to work quite well...).
Very roughly speaking, if there's both black and red geometry in an icon, it means the red is component input and the black is component output.
Drop shadows are pixel effects, applied to the 24x24 image. They have a blurring radius of 2 pixels, a horizontal offset of 1 pixel to the right, a vertical offset of 1 pixel to the bottom and they are 65% black.
When you use high contrast shapes (for example black edges on a light background) the anti-aliasing provided by vector renderers such as Xara or Illustrator won't be enough to make it look smooth. I'd recommend avoiding high contrast if at all possible, but if not possible then draw a 1-pixel line around the dark bits in 95% transparent black. This effectively extends the anti-aliasing range from 1.5 to 2.5 pixels and it helps make things looks smoother.
--
David Rutten
david@mcneel.com…
ect + Geco
TUTORS:
Arturo Tedeschi (Authorized Rhino Trainer) + Maurizio Arturo Degni
Il workshop avanzato ECOLOGIC PATTERNS affronta l’impiego di strategie parametriche all’interno del processo progettuale, approfondendo l’utilizzo di Grasshopper in sinergia con plug-in, software di analisi ambientale e simulazione fisica. Obiettivo fondamentale è la generazione della forma come risultato di tecniche di form-finding e di input ambientali (solari, termici e acustici). Verranno acquisiti nuovi strumenti operativi e di simulazione al fine di costruire modelli parametrici ottimizzati in grado di adattarsi a diverse condizioni di contesto.
MORE INFO…
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
(1) I have been exporting small sections of a larger model into Maya from Rhino as FBX. In Maya I rotate and scale the models (-90 in X, Scale XYZ 0.001). The Named Views are being saved, but do not have a successful import into the Maya model. They do not appear as in Rhino, and the problem is not solved by scaling or rotating the cameras.
(2) If I try going the other direction, the cameras exported from Maya as FBX are also not aligning with the model in Rhino as they are in Maya.. I will do my best to post some images of the problem and hope you can help.
error !!
This is what the named views look like
here I am trying to the other way with a good view from Maya
strange placement..
This is the best result I can achieve, after I scale the camera by 1000
Any Advice???
Thanks, Robert.
…
ysim.ning.com/
When you run the simualtion you will notice on the batch terminal that Daysim is also being called, so you may want to consider how Daysim uses Radiance files & data.
Regarding your current problem, I think you stumbled onto something weird and interesting.
Interior and exterior readings appear to differ by 40 in the best case scenarios. Even setting the transmittance to 1 yields similar results. I tried changing from cummulative sky to climate sky and got similar values. Changing the test points did nothing either.
I think, (yet I'm too lazy to prove this) that the difference in values stems from diffuse radiation over the sky dome.
If you delete everything except the glass you'll notice that interior values are like 80-90% of the exterior values (this seems like the expected behaviour with a transmittance of 1). So, if we consider that a vertical window, part of an opaque box, is receiving radiation from 25% of a sphere, as you start to inset the interior test points the radiation they receive will be a fraction of the 25%.
Let me try to explain this better...The exterior surface receives radiation from a section of a sphere calculated by 180degrees on the xy plane (let’s call this angle theta) and by 90degrees (let’s call this angle phi) in azimuthal elevation. If you integrate this over spherical coordinates (theta from 0 to pi; phi from 0 to pi/2) you will find that it comes to a quarter of a sphere. By comparison, the interior surface will not integrate theta from 0 to 180degrees,nor phi from 0 to 90degrees, instead it will be the subtended angle from the exterior surface as a function of their separation; the farther in you go the smaller the view of the outside.
If my hypothesis is correct there shouldn't be that much difference since the separation is only 10cms...the subtended angle would be like 170 instead of 180 for theta and 85 instead of 90 for phi...overall if you integrate both spherical areas there should only by a difference of 10%.
In conclusion, I believe the unexpected behaviour stems from the previous subtended angle thing. If direct radiation was the only factor the difference would be the aforementioned 10%, which suggests that an additional source of energy is also affected by this. Perhaps indirect and diffuse radiation from other areas of the sky dome.
I’m definitely intrigued on why this is happening. Please post if you figure it out.
Regards,
Mauricio
…
TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
well, very similar input data must result in wildly different hashes. For example, imagine we have an algorithm which computes hashes of text, and the hashes it computes are all numbers between 0 and 999. We then apply this algorithm to a piece of text:
"When Spring comes back with rustling shade" = 385
So far so good. Now imagine we change the text slightly, for example by removing a single "l":
"When Spring comes back with rusting shade" = 973
Minor change -> very different hash. There are of course way more unique texts than there are numbers between 0 and 999. This must therefore mean that a lot of text will result in the same hash. For example "When Spring brings back blue days and fair." may also result in a hash of 385. Because of the pigeonhole principle, there is nothing to be done about this.
Now for the tricky bit. Hashes are often used to validate executable code. Say your friend James at MI6 sends you a small program that will allow you to eavesdrop on Angela Merkel, and -over the phone- he tells you the hashcode for that application. You can then hash the application yourself, verify that it indeed results in the same hashcode and then you know you can trust the executable.
But now Jack from the FBI intercepts the email and adds a few sneaky lines of code to the original application allowing him to determine from your internet search history with up to 95% accuracy whether you like extra cheese on your pizza. The application has now been tampered with, it can no longer be trusted and you should be able to figure this out as it will no longer result in the same hash code.
But wait! Some hashing algorithms are more secure than others. MD5 is now officially considered to be 'hacked' and it is no longer recommended for doing naughty spying. Specifically, Jack will be able to inject his own code in such a way that it does not result in a different hash. Instead, the SHA family of hashers are to be used, as it is not yet known how to trick these hashers.
This is where the problem comes in, because apparently the US government has forcefully disabled the use of MD5 for all purposes. This is a shame because I use it to quickly compare bitmap icons for identicalness so I only have to store an icon in memory once. There is no security hole due to this, because I'm not hashing secure data. MD5 is somewhat faster than SHA, and since I have to hash several hundred icons on Grasshopper start, I opted for the faster one.
(Very) long story short; you're hosed. Grasshopper uses MD5; USgov does not like; Grasshopper does not run on USgov computers.
I'll do some testing to see if I can switch to SHA and then we can see whether or not that solves the problem. This however will take a while as I'm going on a business trip next week and have yet to prepare my presentations.
--
David Rutten
david@mcneel.com…
Added by David Rutten at 12:06pm on March 31, 2014
azione parametrica e generativa attraverso Grasshopper, plug-in di programmazione visuale per Rhinoceros 3D (uno dei più diffusi modellatori NURBS per l‘architettura e il design). Il workshop mira a gestire e sviluppare il rapporto tra informazione e geometria lavorando sui sistemi ad involucro in condizioni specifiche.La discretizzazione di superfici (pannellizazione Nurbs o Mesh), la modellazione delle geometrie attraverso informazioni (siano esse provenienti da analisi ambientali, mappe o database) e l’estrazione e la gestione di queste informazioni, richiede la comprensione di strutture di dati al fine di gestire completamente processo che va dalla progettazione alla costruzione.I partecipanti impareranno come costruire e sviluppare strutture di dati parametrici per informare geometrie ‘data-driven’ e come estrarre le informazioni rilevanti da tali modelli per il processo di costruzione.
Modulo 2 – Il workshop, volto a promuovere le nuove tecnologie digitali di supporto alla progettazione e alla fabbricazione, esplorerà l’integrazione tra design e prototipazione tramite processi di stampa 3d di materiale ceramico al fine di comprenderne allo stesso tempo sia il comportamento del materiale che i vincoli e le opportunità offerte dall’utilizzo di tali tecnologie.Infatti utilizzando grasshopper ed una macchina a controllo numerico i partecipanti apprenderanno le modalità per la generazione parametrica dei modelli e la creazione del codice per la loro prototipazione (Gcode creato direttamente in Grasshopper). Il workshop darà quindi ai partecipanti la possibilità di testare direttamente i loro elaborati digitali stampandoli in modo da comprendere come le informazioni articolate tramite tali strumenti di design producano specifici effetti sia morfologici che estetici.…