te some implications and questions so I will go one by one:
"Now I would like to use a single VRay material as a template for creating multiple identical materials"I hope this will work, but as VRay does not expose any SDK, I would not guarantee any specific result.
"Now I need to add them to the document material table"This is done with a reference to a document instance, such as the one you get with the code doc.Materials (both in C# and Vb.Net).
"I'm not going to learn C# to modify his script"That's a pity, it would be nice to pass on this troublemaker to somebody else! :)Btw, C# and Vb.Net are very very similar. This script could be written in Vb.Net too.
"Reference to a non-shared member requires an object reference. (line 96)"This only means that you need to access the Materials property on an instance, not on the type (class) name. Change that line using what is written at point 2.
"Do I understand that the material has to be assigned to a particular object in order to enter the Material Table?"No it does not. But if you call the _Purge command it will be removed if it does not have an object that references it.
"Can I assign it to a Layer instead?"You do not need to. But this would be achieved with doc.Layers[whichLayer].RenderMaterialIndex = materialIndex; in C# or doc.Layers(whichLayer).RenderMaterialIndex = materialIndex in Vb.Net.
"Any ideas? A better way to do this?"If you found a way to bypass the VRay SDK not being there, this should work.
"Giulio's component has a type hint defined as a Material"It does not any longer. The hint was there in earlier versions of Grasshopper, but now the hint has disappeared. This is not so bad, and it is also the only way you would be able to use either a Material instance already or a string for a material name.
"How was that done?"Probably it was done in an older version of Grasshopper. But which version are you using?
"I can't figure out how to cast the input as a Rhino.DocObjects.Material, so you can see that I have cast it as a compatible type in the first 2 lines... is there a cleaner way?"That sounds like a good way actually. Be sure your component responds properly when something wrong is inputted, though.Dim mTemp As Rhino.DocObjects.Material = CType(M, Rhino.DocObjects.Material)in one line might also work. See msdn for more conversion operators and functions.
I hope this helps,
- Giulio_______________giulio@mcneel.com…
Organic form and nature...
On Growth and Form: The Complete Revised Edition by D'Arcy Wentworth Thompson - The classic
Patterns in Nature - by Peter S. Stevens
A new kind of Science - Q
sinergetici associati alla compresenza simultanea di differenti strumenti di analisi e digital design all'interno di un processo di progettazione in svolgimento. I partecipanti utilizzeranno Grasshopper (modellatore parametrico per Rhino): l'uso di questo editor grafico di algoritmi si integra alla perfezione con gli strumenti di modellazione di Rhinoceros 3D espandendo le possibilità di corstruire modelli parametrici altamente complessi. Per generare una complessità simile saranno utilizzati collegamenti live ai diversi programmi elencati di seguito: . Autodesk Ecotect Analysis via GECO . FEA software GSA via SSI Durante questi intensi 3 giorni, i partecipanti impareranno il workflow dei plug-ins con l'aiuto di esempi esplorando una panoramica dei differenti software, le possibilità di testare le performances di un progetto o l'uso di strumenti addizionali non legati ad un singolo sistema (es. accentuazione, formazione, reazione parametrica) [english text] The focus of the workshop is to integrate and correlate the synergistic effect associated with simultaneous presence of different digital design- and analysis tools in an ongoing design process. The main attention is set on easy to handle interface , which should be used at a early stage of conceptual design to respond to external and internal influences in a intelligent and sustainable way. Participants will use the software Grasshopper as a parametric modeling plug-in for Rhino. The usage of this graphical algorithm editor tightly integrated with Rhino's 3-D modeling tools open up the possibility to construct highly parametrical complex models. To generate this complexity we will use live linkages to several programs listed below: . Autodesk Ecotect Analysis via GECO . FEA software GSA via SSI In this 3 intense days, the participants should learn the workflow of the plug-ins with the help of examples and get an overview of the different software's, there possibilities for evaluating the performance of a design or the usage of additional tools to be not chained to a single system . (e.g. parametrical accentuation, parametrical formation, parametrical reaction) [.] Dettagli : Istruttori: Thomas Grabner & Ursula Frick from [uto]. lingua del corso: inglese (saranno disponibili tutor di supporto ma è richiesta una conoscenza di base della lingua unglese).
Quote d'iscrizione (min 12 max 20 posti): educational* : € 280.00 + iva professional: € 450.00 + iva * studenti, docenti, ricercatori, dottorandi e laureati fino a un anno dalla data di laurea OFFERTA EARLY BIRD SPECIAL: le prime 5 domande di iscrizione pervenute entro il 31 Dicembre 2011 avranno diritto ad una quota di iscrizione scontata del 20% Quote d'iscrizione E.B. SPECIAL: E.B. SPECIAL educational* : € 224.00+ iva E.B. SPECIAL professional: € 360.00+ iva. ulteriori info, dettagli e iscrizioni: http://www.co-de-it.com/wordpress/nexus-advanced-grasshopper-workshop-with-uto.html…
nside the zone. I would move your comfort evaluation surface to be 1 meter off the ground in order to be representative of typical human height.
Also, you did not intersect the ground with the rest of the zone geometry, resulting in an incorrect energy simulation. After intersection, you also get one surface of the ground zone that is not inside any buildings. I fixed these two things in the attached file ad it works:
I would also recommend breaking the top surface of the ground up into sub-surfaces so that you can capture the variation in ground surface temperature that happens across the outdoors. Second, I would recommend putting some windows on your buildings as the exterior surface temperature of windows can be very different than that of opaque surfaces. Finally, you should keep in mind that the outdoor maps are assuming a very basic outdoor wind profile by default and, to accurately understand outdoor comfort, you really should be incorporating wind patterns after running a CFD. This discussion has some information about importing CFD from other programs to GH:
http://www.grasshopper3d.com/group/ladybug/forum/topics/import-cfd-result-to-honeybee
-Chris…
it seems that was this. Now all is working fine !
Glad that it worked! But I am still a bit worried. Gismo components only modify the gdal-data/osmconf.ini file and no other MapWinGIS file. So your MapWinGIS installation files should not be compromised. The fact that you did not get the "COM CLSID" error message when running the "Gismo Gismo" component suggests that MapWinGIS has been properly installed. So I wonder if the cause for the permanent "invalid shapes" warning has again something with the fact that your system is again not allowing the MapWinGIS to properly edit the osmconf.ini. Maybe this problem will appear again, and again, and reinstallation of MapWinGIS every time can be somewhat bothersome.
- About the terrain generation, is it possible to have the texture from google or other provider mapped onto the terrain surface from gismo component ? (Same as using the ladybug terrain generator in fact). I try to used the image extracted by ladybug component and then applied it to the gismo terrain but the texture is rotated by 90°.
The issue with the rotation can be solved by swapping/reversing the U,V directions of the terrain surface. A slightly more important issue is that terrain surface generated with Gismo "Terrain Generator" component might have a bit smaller radius than what the radius_ input required. This stems from the fact that the terrain data first needs to be downloaded in geographic coordinate system, and then projected. Some projecting issues may occur at the very edges of the projected terrain, so I had to slightly cut out the very edges of the terrain which results in the actual terrain diameters being slightly shorted in both directions. This means that if you apply the same satellite image from Ladybug "Terrain Generator" component to Gismo "Terrain Generator" component the results may not be the same.I attached below a python component which tries to solve this issue by extending the edges of Gismo "Terrain Generator" terrain, and then cutting them with the cuboid of the exact dimensions as the radius_ input. Have in mind that this extension of the original terrain at its edges is not a correct representation of the actual terrain in that location. But rather just an extension of the isoparameteric curve of the terrain surface. So basically: some 0 to 10% (0 to 10 percent of the width and length) of the terrain around all four edges is not the actual terrain for that location, but rather just its extension.The python component is located at the very right of the definition attached below.
Also, if you would like to use the satellite images from Ladybug "Terrain Generator" component along with "OSM shapes", sometimes you may find slight differences in position of the shapes. This is due to openstreetmap data not being based on Google Maps (that's what Ladybug "Terrain Generator" component is using), but rather on Bing, MapQuest and a few others.
- About the requiredKeys_ input of OSM shapes, I understand what you mean and your advice, but in most cases I use it, the component was working fine even without input. I think it's better to extract all tags, values and keys of the selected area, instead of searching for specific ones as I try to find all data related to what I want after, isn't it ? To check what keys are present on the area also.
Ineed, you are correct.I though you were trying to only create a terrain, 3d buildings and maybe find some school or similar 3d building, for these two locations. The recommendation I mentioned previously is due to shapefiles having a limit (2044) to how many keys it can contain. This requires further testing of some big cities locations with maybe larger radii, which I haven't performed due to my poor PC configuration. But in theory, I imagine that it may happen that a downloaded .osm file may have more than 2044 keys. In that case shapefile will only record 2044 of them, and disregard the others. That was my point.But again 2044 is a lot of keys, and I haven't been checking much this in practice. For example, when I set the radius_ to 1000 meters, and use your "3 Rue de Bretonvilliers Paris" location I get around 350 something keys, which is way below the 2044.Another reason why one should use the requiredKeys_ input is to make the Gismo OSM components run quicker: for example, the upper mentioned 350 something keys will result in 350 values for each branch of the "OSM shapes" component's "values" output.Which means if you have 10 000 shapes, the "OSM shapes" component will have 10 000 branches with 350 items on each branch (values). This can make all Gismo OSM components very heavy, and significantly elongate the calculation process.With requiredKeys_ input you may end up with only a couple of tens of items per each branch.Sorry for the long reply.…
Added by djordje to Gismo at 8:57am on June 11, 2017
ino al suo utilizzo per la risoluzione di tematiche di modellazione complessa di ARCHITETTURA e DESIGN.Durante le lezioni si insegneranno i comandi avanzati del software Rhinoceros ed inoltre i discenti, alla fine del percorso formativo saranno anche in grado di creare modelli attraverso il linguaggio della Plug-in avanzata Grasshopper(http://www.grasshopper3d.com/photo).
Il workshop si divide in due moduli che possono essere frequentati anche separatamente:
STRUTTURA
mod.1 _MODELLAZIONE BASE con Rhinoceros | Venerdì 14 Dicembre e Sabato 15 Dicembre | dalle 10,00 alle 19,00
Scadenza iscrizione: Lunedì 10 Dicembre
mod.2 _MODELLAZIONE AVANZATA con Rhinoceros e Grasshopper | Domenica 16 Dicembre e Lunedì 17 Dicembre | dalle 10,00 alle 19,00
Scadenza iscrizione: Mercoledì 12 Dicembre
SINTESI
mod.1 _MODELLAZIONE BASE con Rhinoceros
L’obbiettivo del corso è quello di insegnare in tempi brevi, gli strumenti base della modellazione 2D e 3D e la renderizzazione dei modelli creati. Le ore saranno dedicate allo studio dell’interfaccia del software Rhinoceros e all’apprendimento dei comandi base per la gestione del documento di progetto; si approfondiranno i comandi più utilizzati per l’editing e la costruzione del disegno per arrivare alle operazioni booleane semplici e complesse. Inoltre si imparerà a costruire e trasformare curve e superfici free-form. Le nozioni ed i metodi verranno trasmessi trattando temi e problematiche reali di design ed architettura.
mod.2 _MODELLAZIONE AVANZATA con Rhinoceros e Grasshopper
Il secondo modulo tratterà forme complesse implementando la modellazione avanzata di Rhinoceros con le potenzialità espresse dalla plug-in Grasshopper. La plug-in di Rhinoceros permette di disegnare abbandonando l’usuale interfaccia dei software di rappresentazione, consentendo un rapporto più diretto con il linguaggio proprio del computer: la programmazione. Questo cambiamento porta ad una radicale variazione del rapporto che il progettista ha con lo strumento di rappresentazione digitale. I partecipanti saranno orientati verso un nuovo rapporto con le forme create che oltre ad essere frutto di trasformazioni delle entità primitive che Rhinoceros propone, si costruiranno anche in relazione a parametri variabili.
Nel corso si imparerà a comporre algoritmi semplici, di carattere principalmente geometrico, in grado di generare forme e gestire i comportamenti delle stesse se sottoposte a variabili esterne.
In fine si imparerà a confrontarsi con un contesto evolutivo, che influenza i parametri della rappresentazione portando a dei modelli dinamici.
…
aggie experiences her first love, her father leaves her mother at Christmas as a child. After her ex-husband leaves her family at Christmas twenty years later, Maggie forms a protective shield over her heart and her son, Jordan. Jordan, however, sees that Maggie is lonely, and writes letters to God praying for her happiness. Jordan's prayers are answered when Maggie meets his tutor, widower Casey, and forms an instant connection that is stronger than the one she has with Tanner, the fellow divorce attorney she had been dating. When Maggie and Casey begin to fall in love, though, Maggie pulls back. After discovering a coincidental childhood connection with Casey, and reading Jordan's letters to God, though, Maggie must decide if Christmas is the right time to open her heart to love.
We hope you enjoy and fun here. so do not miss to watch and visit Karen Kingsbury's Maggie's Christmas Miracle Online for free on Monday. It’s up to you, you can watch it streaming via the Internet, or through a television at home. You don’t need to install anything and you can Watch Karen Kingsbury's Maggie's Christmas Miracle in very good quality.
watch Karen Kingsbury's Maggie's Christmas Miracle Online
watch Karen Kingsbury's Maggie's Christmas Miracle Online Free
watch Karen Kingsbury's Maggie's Christmas Miracle
Karen Kingsbury's Maggie's Christmas Miracle
Karen Kingsbury's Maggie's Christmas Miracle Free
Karen Kingsbury's Maggie's Christmas Miracle Streaming
Stream Karen Kingsbury's Maggie's Christmas Miracle
watch Karen Kingsbury's Maggie's Christmas Miracle Stream
watch Karen Kingsbury's Maggie's Christmas Miracle Free
watch Online Karen Kingsbury's Maggie's Christmas Miracle
watch Karen Kingsbury's Maggie's Christmas Miracle Full Video
Karen Kingsbury's Maggie's Christmas Miracle Megavideo
Karen Kingsbury's Maggie's Christmas Miracle Putlocker
Karen Kingsbury's Maggie's Christmas Miracle Megashare
Karen Kingsbury's Maggie's Christmas Miracle Youtube
Karen Kingsbury's Maggie's Christmas Miracle Dailimotion
Karen Kingsbury's Maggie's Christmas Miracle Xvid
Karen Kingsbury's Maggie's Christmas Miracle Player
Karen Kingsbury's Maggie's Christmas Miracle Vidto
Karen Kingsbury's Maggie's Christmas Miracle played…
Added by rogerdanuarta at 11:34am on December 13, 2017