ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
even (0, 2, 4) then that means the point either never hit it, or went in and out again, meaning it's outside. If it hits an odd number of times, then it must have come from within originally.
The method implements this approach using the mesh bounding box, and then striking a polyline from your test point along a vector that is defined by the upper right corner of the bounding box + a vector of (100,100,100). In the case of your failing points, this is a result of their striking an edge very precisely, which gets counted as 2 hits instead of 1 (as it should be getting captured) and passing false:
Your best bet is probably to roll your own implementation, that tests for multiple vectors:
private void RunScript(List<Point3d> P, Mesh M, ref object A, ref object B, ref object C) {
BoundingBox bb = M.GetBoundingBox(false);
List<bool> inside = new List<bool>();
for (int i = 0; i < P.Count; i++) {
Polyline a = new Polyline(); Polyline b = new Polyline();
a.Add(P[i]); b.Add(P[i]);
a.Add(bb.Max + new Vector3d(100, 100, 100)); b.Add(bb.Max + new Vector3d(100, 150, 150));
int[] fa; int[] fb;
Point3d[] xa = Rhino.Geometry.Intersect.Intersection.MeshPolyline(M, new PolylineCurve(a), out fa); Point3d[] xb = Rhino.Geometry.Intersect.Intersection.MeshPolyline(M, new PolylineCurve(b), out fb);
inside.Add(xa.Length % 2 == 1 || xb.Length % 2 == 1);
checkA.AddRange(xa, new GH_Path(i)); checkB.AddRange(xb, new GH_Path(i));
}
A = inside;
}
…
Added by David Stasiuk at 10:20am on October 10, 2017
till quite rough.
I went through your attached log but it seems to be a successful run, perhaps the error log wasn't attached. In any case, I believe we have identified this issue. The goal of the update fvSchemes component was to apply schemes to finalized meshes in an automatic way. While this is useful for new users it is also a dangerous thing to do in CFD studies.
The component works by relating mesh quality to the mesh non-orthogonality, which the checkMesh component reports. While non-orthogonality is one of the important criteria of mesh quality it does present difficulties on some kind of meshes, especially like the simple cases that BF has been meshing so far.
The example case of simple box buildings in a wind tunnel above for instance will appear as a good quality case for even the lowest of cell-count meshes, simply because it is an orthogonal geometry. That means that checkMesh will probably report low values (imagine an empty blockMesh of 10m blocks has a non-orthogonality of 0) which in turn means that higher order schemes might be paired with actually low quality meshes. This I believe is causing problems.
I posted a possible solution to this here https://github.com/mostaphaRoudsari/Butterfly/issues/57. The idea is that Buttefly provides additional options to the users, enabling them to choose between first-order (faster, more robust, but lower quality schemes) and second-order (slower, less robust, but more accurate) schemes depending on mesh quality, stage of assessment, etc. In cases like the above mesh quality a first-order scheme might provide a better option. To test this I am attaching an fvSchemes file you can use by replacing yours in the /system folder of the case.
As a note however, I would like to stress there is so much that a tool like Butterfly can provide in this area. Meshing is a quite complicated and demanding part of the process, involving a lot of trial and error. Sometimes the problem is just the mesh and not the solution options (GIGO stands true in CFD as well). It does however get easier with experience. The safe advice is the simplest one: when changing solution options doesn't help, refine mesh and run again.
Kind regards,
Theodore.…
ino Mc Neel, autore di "Architettura Parametrica - Introduzione a Grasshopper", il primo manuale su Grasshopper. I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali. Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni. Argomenti trattati: - Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow - Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici - Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler - Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC Verrà rilasciato un attestato finale. INFO E PRENOTAZIONI: http://www.arturotedeschi.com/wordpress/?p=2888…
a pain to use sometimes. I recently found this great post:
http://www.grasshopper3d.com/forum/topics/formatting-numbers-in-grasshopper
which points to the msdn .net framework standard numeric format strings:
http://msdn.microsoft.com/en-us/library/dwhawy9k.aspx
and the custom ones too:
http://msdn.microsoft.com/en-us/library/0c899ak8.aspx
Sooo... today I was trying to make a 2D array generator for RGB values to use with a RGB LED and an Arduino. For instance, declaring a 2D array in Arduino:
int color[3][3]={{255,0,0},{0,255,0},{0,0,255}};
I'm using the blend color component to spit out transitions between two colors. I want the list in the panel to be in the format above, so I used both the expression component and the string format component (are they the same under the hood?). In any case, if I have R, G and B values coming into the component, I want to format them so the come out looking like {R,G,B}, so I can just copy the output in a panel and paste it into the Arduino IDE. But what about {curly braces}. If the expression/format component uses them in it's syntax, for instance:
Format ("{R:0},{G:0},{B:0}",R,G,B)
how do I get them into the formatting string? I tried escaping them like:
Format ("\{{R:0},{G:0},{B:0}\}",R,G,B)
but that just makes the component angry
Escaping characters is explained in the formatting references above. Is it implemented in this component? Should I be looking at a different approach?
I've included a sample file below.
Thanks!
~BB~
…
ing-in-python?commentId=2985220%3AComment%3A628495
For the most part, I got the serial port to work and I could share the port with other components without wiring the components together using a sticky Python dictionary. There were a couple of issues with closing the port (Rhino had to be restarted).
In any case, I'm back at it. I am however going the C# component route with an eye towards writing my own components with visual studio. I am trying to create bidirectional communication with a serial device in grasshopper. I need more control over the serial port that the generic Firefly components can afford. Furthermore, I would like to understand how to program this myself. The first goal would be to create a few components that could handle various serial tasks, one to open/close port, one to read from port and one to write to it. This is not unlike how I got it to work in python, and is also similar to the logic in Firefly's serial components.
The thing that has me stumped with C# is how one shares the port between components? If one component is responsible for creating and opening/closing the port, how do the read/write components address the instance of the port created in the other component? Python has the sticky dictionary, is there something similar in C#? I'm a novice when it comes to C# and how it works within grasshopper, so maybe I'm missing something simple.
I've attached a klunky definition that uses C# to open/close a serial port. I've tried accessing the port with other components, but I don't know enough to make it work. Again, I'm mainly interested in the mechanics of how one component can access the serial port instance created in another component. If I could get some user objects going for now, I'd be happy. In the future, I want to roll my own components. If anyone has any suggestions, code snippets, or any other forms of enlightenment, I'd be greatly appreciative!
Rhino5 x64 + GH version 0.9.0056
Thanks,
~BB~
…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016