(1) I have been exporting small sections of a larger model into Maya from Rhino as FBX. In Maya I rotate and scale the models (-90 in X, Scale XYZ 0.001). The Named Views are being saved, but do not have a successful import into the Maya model. They do not appear as in Rhino, and the problem is not solved by scaling or rotating the cameras.
(2) If I try going the other direction, the cameras exported from Maya as FBX are also not aligning with the model in Rhino as they are in Maya.. I will do my best to post some images of the problem and hope you can help.
error !!
This is what the named views look like
here I am trying to the other way with a good view from Maya
strange placement..
This is the best result I can achieve, after I scale the camera by 1000
Any Advice???
Thanks, Robert.
…
ysim.ning.com/
When you run the simualtion you will notice on the batch terminal that Daysim is also being called, so you may want to consider how Daysim uses Radiance files & data.
Regarding your current problem, I think you stumbled onto something weird and interesting.
Interior and exterior readings appear to differ by 40 in the best case scenarios. Even setting the transmittance to 1 yields similar results. I tried changing from cummulative sky to climate sky and got similar values. Changing the test points did nothing either.
I think, (yet I'm too lazy to prove this) that the difference in values stems from diffuse radiation over the sky dome.
If you delete everything except the glass you'll notice that interior values are like 80-90% of the exterior values (this seems like the expected behaviour with a transmittance of 1). So, if we consider that a vertical window, part of an opaque box, is receiving radiation from 25% of a sphere, as you start to inset the interior test points the radiation they receive will be a fraction of the 25%.
Let me try to explain this better...The exterior surface receives radiation from a section of a sphere calculated by 180degrees on the xy plane (let’s call this angle theta) and by 90degrees (let’s call this angle phi) in azimuthal elevation. If you integrate this over spherical coordinates (theta from 0 to pi; phi from 0 to pi/2) you will find that it comes to a quarter of a sphere. By comparison, the interior surface will not integrate theta from 0 to 180degrees,nor phi from 0 to 90degrees, instead it will be the subtended angle from the exterior surface as a function of their separation; the farther in you go the smaller the view of the outside.
If my hypothesis is correct there shouldn't be that much difference since the separation is only 10cms...the subtended angle would be like 170 instead of 180 for theta and 85 instead of 90 for phi...overall if you integrate both spherical areas there should only by a difference of 10%.
In conclusion, I believe the unexpected behaviour stems from the previous subtended angle thing. If direct radiation was the only factor the difference would be the aforementioned 10%, which suggests that an additional source of energy is also affected by this. Perhaps indirect and diffuse radiation from other areas of the sky dome.
I’m definitely intrigued on why this is happening. Please post if you figure it out.
Regards,
Mauricio
…
TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
ents will react to sensors, creating a range of different lighting and spatial effects that will trigger further movement and produce a feedback loop of behaviour and response. To accommodate this responsiveness, the design will be developed using parametric associative modeling, processing, arduino, and digital fabrication using the CNC and Laser Cutters. Students can both develop completely new designs, and/or work on the evolution of the Workshop 1 Supple Pavilion project.
The Visiting School will return to Barracão Escola de Carnaval to evolve the design of the migrating Pavilions, their contents and their context, exploring a design philosophy of interactive event design and the production of a creative fusion of high-tech design generation and fabrication with low-tech redefinition of Carnival-float artisan techniques, paraphernalia, and materials. We will work in the immense and creative Pimpolhos warehouse, collaborating with local artisans of several Samba Schools in the post-industrial, partly-derelict Porto do Rio area, (the birthplace of the Carnival and Samba), introducing digital fabrication techniques. The goal is to create interventions for micro-venues and cultural events that express the identity of the Samba culture within the `Porto Maravilha` planning.
Instruction for the Supple Pavilions workshop series will be led by Rob Stuart-Smith of Kokkugia, Lawrence Friesen of Generative Geometry, Ivan Ivanoff of Interactive Art Estado Lateral Media Lab, Toru Hasegawa of Proxy, with Anne Save de Beaurecueil and Franklin Lee of SUBdV, along with other AA tutors, the Pimpolhos Artistic Directors, and Carnival float-fabricators. Each workshop will provide an introduction to computational design (Grasshopper, Processing and Arduino) and digital fabrication, no previous computational experience is required. Students taking part in multiple workshops will have access to advanced computation instruction. This workshop will produce 1:1 prototyping, exploring the structure and transformations of the pavilions. Final fabrication and assemblage will occur in July.
The workshop is open to architecture and design students and professionals worldwide. Participants can take part in one or more workshops, with fee discounts offered to those interested in multiple workshops.
…
he results are accurate enough.Good to go!Current working directory is set to: C:\002_VIDEO\02_UNI\TU_GRAZ\01_DISSERTATION\02_RESEARCH\08_POMODORO\01_SIMULATION_MODEL/03_HONEYBEE\VF_00\gridBasedSimulation\start cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineRuntime error (IndexOutOfRangeException): index out of range: 0Traceback: line 271, in script…
is set to: C:\002_VIDEO\02_UNI\TU_GRAZ\01_DISSERTATION\02_RESEARCH\08_POMODORO\01_SIMULATION_MODEL/03_HONEYBEE\VF_00\gridBasedSimulation\start cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineRuntime error (IndexOutOfRangeException): index out of range: 0Traceback: line 271, in script…
dy for a wall where we want to analyze its openings. I made a parametric wall that then get's analyzed with different geometries and the idea was just to leave it there for the weekend as it morphed through different iterations. However, after successfully running a test simulation on my pc (just with one iteration), it fails to run the same test on the workplace computer. Any help would be greatly apprecated! Here is the following error:
Sorry! But the number of available CPUs on your machine is 4.
Honeybee set the number of CPUs to 4.
Grid-based Radiance simulation
The component is checking ad, as, ar and aa values. This is just to make sure that the results are accurate enough.
Good to go!
Current working directory is set to: C:\ladybug\Parametric_Shading_Wall\psw_z0.25_t.025_y.2_r90_m3_lux\gridBasedSimulation\
Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Runtime error (PythonException): Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
PS. It says to see line 336…
y using the Honeybee_Update Honeybee component.
The video below (best viewed in full-screen mode) provides an idea of what these components are capable of being used for:
The video below shows how these components can be used in an existing Honeybee project (for additional links please open this video in youtube):
I have uploaded two examples as Hydra files that show how these components can be used for grid-point and image-based simulations:
Example1 : Grid Point Calculations
Example2: Image based simulation
Finally, a more esoteric application is demonstrated in this video:
These components are still in the beta-testing stage. Some of the limitations of the components are:
1. Only Type C photometry IES files are supported at present.
2. Rhino is likely to get sluggish if there are too many luminaires (i.e. light fixtures) present in a scene.
3. Due to the spectral limitations of the ray-tracing software (RADIANCE), simulations involving color mixing might not be physically realizable.
Additional details about photometric and spectral calculations are probably an overkill for this forum. However, I'd be glad to answer any related questions. Please report any bugs or request new features either on this forum or on Github.
Mostapha, Leland Curtis, Reinhardt Swart and Dr. Richard Mistrick provided valuable inputs during the development of these components.
Thanks,
Sarith
Update 16th January 2017:
An example with some new components and bug fixes since the initial release announcement can be found here
…
mp; fabrication and construction into a new era of architecture.
Register HERE
We follow three lines of thought to translate structural design in material fabrication. The first ultra lightweight, rethinking shape and material, the second dealing with same single material components, aggregated within a network, working with directionality of the elements and their connections to perform stability and for the third we will rethink definition of the brick.
Our Translations will be designed, analysed and presented in both digital and physical prototypes; from table top models, to 2m high structures.
The use of Grasshopper, Karamba and Digital Fabrication tools drive our evolutions of design. Structural design allows us to play with the type of forces in elements, orientation, force flow, geometry, restraints and connection. We use this structural behaviour to inform the search for new links between materiality, form and construction, progressing towards a unique relationship of structure, construction and fabrication.
Our Translations will be presented, through digital and physical prototyping showcasing the process of linking digital and physical inputs as a continuous feedback loop, rethinking structural design and material fabrication.
…