h tubes are redundant so surfaces overlap instead of interpenetrate, so it is not a good system.
Cocoon is the best answer these days unless you can get Exowire/Exoskelton to work. If you want more control over shape, feed your uncapped tubes into Cocoon as meta-surfaces and delete any and all of the inner meshes to just keep the outer single closed one, but this is just duplicate-culled lines used as meta-lines:
Turn down the CS input to 0.005 for this result, from 0.02 used for faster preview. In fact bake the lines and only test Cocoon on a few of them in order to get the result you want before doing the whole thing.
Whole thing at 0.005 cell size takes 5 minutes for Cocoon and 2 minutes for refinement to a smooth and even mesh.
Actually, seems like 0.005 is way too fine, giving a 600MB STL file.
So, 0.01 cell size at less than a minute total:
159MB STL which is still a bit too big for places like Shapeways. Wow. OK then 0.02 cell size, but I have to increase diameter or my two smoothing steps in refine collapse things too much, an in fact I set it to no smoothing, getting more volume and a reasonable 46MB STL file:
Alas, now it's more frail and overly organic rather than mechanical. Increasing diameter just merges it into perforated plates too much. File size is simply an issue with this complexity level, so different 3D printing services will have different file size limits.
Exowire/Exoskeleton would work but your original mesh hasn't been MeshMachine remeshed to be regular, so short segments ruin it. Here is just a corner:
I think that's why more wires fails, at least. Pretty temperamental component.
Switching to MeshMachine is needed, I guess, instead of Cocoon refine, to remesh away so many small triangles along the boring tubes. Crucial for good remeshing was to set Flip to 0 or I failed to get a rough enough mesh.
It's an adaptive mesh so I can retain good detail while roughing out the tubes.
MeshMachine is terribly slow for this whole thing, like 6 minutes, and blows up for this overly rough setting, 20 steps, so less rough, ugh, I'm out of time. I think free Autocad Meshmixer is the way to make a better smaller mesh, after a refined output from Cocoon. MeshMachine is just too slow to tweak and when it blows up, creating massive triangles jutting out, it hangs too when you change settings.
Starting with a Cocoon refined mesh certainly helped Meshmixer. Using triangle budget lets me have full control. Here is 150K triangles instead of 200K:
STL file size down to 40MB. I think Shapeways is 70 or 100MB limit? So it can be even finer. Here is the Cocoon output versus the Meshmixer reduction:
To use Meshmixer, turn on View > Show Wireframe, Command-S to select all and use Edit > Reduce from the palette that appears.
Cocoon can end up making a few inner meshes where things get weird in your uneven original mesh with small holes so fish out the main mesh by adding a List Item node.
The best strategy for Cocoon is indeed to make an overly fine STL so you avoid any need to tweak forever in Grasshopper, but then you can achieve a smaller mesh file size while preserving shape instead of things turning all smearly organic in Grasshopper.…
edit 29/04/14 - Here is a new collection of more than 80 example files, organized by category:
KangarooExamples.zip
This zip is the most up to date collection of examples at the moment, and collects t
ers and researchers, programmers and artists, professionals and academics who come together for 4 days of intense collaboration, development, and design.
The sg2012 Workshop will be organised around Clusters. Clusters are hubs of expertise. They comprise of people, knowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The Workshop is made up of ten Clusters that respond in diverse ways to the sg2012 Challenge Material Intensities.
Applicants to the sg2012 Workshop will select their preferred cluster from the following:
Beyond Mechanics
Micro Synergetics
Composite Territories
Ceramics 2.0
Material Conflicts
Transgranular Perspiration
Reactive Acoustic Environments
Form Follows Flow
Bioresponsive Building Envelopes
Gridshell Digital Tectonics
More information about the Workshop and Clusters can be found here:
http://smartgeometry.org/index.php?option=com_content&view=article&id=116&Itemid=131
The application process will close on January 15th, 2012.
Full Fee $1500
Reduced Fee $750
Scholarship Fee $350
Fees include attendance to both the workshop and conference from March 19th-24th.
Reduced Fee and Scholarships are available only for Academics, Students and Young Practitioners, and are awarded during a competitive peer review process.
sg2012 takes place from 19-24 March 2012 at EMPAC (http://empac.rpi.edu/) and is hosted by Rensselaer Polytechnic Institute in Troy, upstate New York USA. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts: a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.
sg2012 Challenge Material Intensities
Simulation, Energy, Environment
Imagine the design space of architecture was no longer at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information. Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities. sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org
Follow us on Twitter at http://twitter.com/smartgeometry…
Added by Shane Burger at 12:29pm on December 13, 2011
peuvent se diviser une surface avec ne importe quel motif imaginable. 3. Ici, je fournir un moyen de le faire via Lunchbox ... cela fonctionne mais il est fixe et donc nous avons besoin de jouer avec des arbres de données afin de créer le motif approprié par cas. 4. L'autre composante est un joint C # qui fait beaucoup de choses autres que de diviser ne importe quelle collection de points avec de nombreux modèles (voir le modèle ANDRE que je ai fait pour vous). 5. Vous devez décomposer une polysurface en morceaux afin de travailler sur les subdivisions. 6. Je donne une autre définition ainsi que pourrait agir comme un tutoriel sur la façon de traiter des ensembles de points via des composants de GH standards et des méthodes classiques.
Avertissez si tous ceux-ci apparaissent floue pour vous: Si oui, je pourrais écrire une définition utilisant des composants de GH classiques - mais vous perdrez les variations de motifs de division.
mieux, Peter
…
olves some changes to the Rhino SDK, so it's likely that there will be problems running 0.8.0008 under Rhino5 until the next Rhino5 WIP goes out.
Changes since 0.8.0007:
● Added a Mesh|Mesh intersection component.
● Added a Mesh|Curve intersection component.
● Added a Replace List component (Sets.List dropdown)
● Added Integer Division component (Math.Operator dropdown)
● Added ToRadians component (Math.Trig dropdown)
● Added ToDegrees component (Math.Trig dropdown)
● Added Cube component (Math.Polynomials dropdown)
● Added CubeRoot component (Math.Polynomials dropdown)
● Added Round component which exposes Round, Ceiling and Floor functions (Math.Util dropdown)
● Added Negative component (Math.Operators dropdown)
● Added Absolute component (Math.Operators dropdown)
● Added 'One over X' component (Math.Polynomials dropdown)
● Updated to Quantum Whale code editor version 1.62
● Added String Sort component (Sets.Strings dropdown)
● Added Create Set component (Sets.Sets panel)
● Added Set Union component (Sets.Sets panel)
● Added Set Difference component (Sets.Sets panel)
● Added Set Symmetric Difference component (Sets.Sets dropdown)
● Added Set Intersection component (Sets.Sets panel)
● Added Set Carthesian Product component (Sets.Sets panel)
● Added SubSet test component (Sets.Sets panel)
● Added Disjoint Set test component (Sets.Sets dropdown)
● Added Set Majority component (Sets.Sets dropdown)
● Added Set Member Index component (Sets.Sets dropdown)
● Added Set Replace Member component (Sets.Sets dropdown)
● Added Set Remove Consecutive Identical Members component (Sets.Sets dropdown)
● Added Mass Multiplication component (Math.Operators dropdown)
● Simplify Tree component now by default collapses *all* coincident path elements.
● Casting error messages are now vaguely less geeky.
● Added polygon center component (Curve.Analysis dropdown).
● Font Defaults are now copied from the OS Fonts.
● Slider Initialization codes can now be used to specify decimal places.
● Profiler widget now displays long time spans in seconds, minutes and hours.
● Added an IsoVist component (Intersect.Mathematical panel)
● Added an IsoVist Ray component (Intersect.Mathematical panel)
● MRU missing file checks are now threaded to prevent UI delays when files are located on slow media.
● Expression Editor has been redesigned.
● Slider Component popup has been redesigned.
● Slider Components now have customizable grip-styles (accessible via popup only)
● Slider Components are now 20 pixels wider by default than before.
● Slider Controls now draw focus rectangle to indicate caret capture.
● Slider Control text input is now automatically activated by a keypress when the slider has focus.
● Slider Controls that are locked are now rendered greyed out.
● Tumbler Controls now draw themselves in 3D style when they are focused.
● Tumbler Control text input is now automatically activated by a keypress when the slider has focus.
● Tumbler Controls that are locked are now rendered greyed out.
● Generic Data parameters now allow setting multiple items via the menu.
● Text display has been rewritten for Text Panels and Param Viewers, making it faster.
● Null items in Text Panels are now drawn transparently.
● Empty strings in Text Panels are now drawn transparently as "<empty>".
● Path mapping operations that do not involve List Indices are faster.
○ Point Parameters could not be baked from the toolbar, this is fixed.
○ Negative slider initialization codes would result in erroneous limits, this is fixed.
○ Fixed a bug with the normal vector output of the Spherical Cloud component.
○ ASCII control code characters in strings prevented ghx serialization, this is fixed.
○ Fixed several bugs with ReadFile component custom parser scripts.
○ Fixed a bug (without introducing other ones I hope) with screwed up output data trees in case of partial path overlaps.
○ Empty branches would get skipped by the PathMapper, this is fixed.
○ Transform multiplication was the wrong way 'round, this is fixed.
○ There was (at least one) bug in the Curve Offset direction code, it got fixed.
○ Fixed a bug with the Convex Hull algorithm (while inebriated on Tokaj no less).
Important notes:
The zero-length-slider-ultra-crash may or may not still happen. I've fixed a bug in slider code that may or may not explain why it happened to begin with (though probably it doesn't) and also some safety code. Please let me know if this is still a problem.
All the Set components operate on simple data types only (Booleans, Integers, Numbers, Complex Numbers, Strings, Intervals, Vectors & Points). They will not work correctly on more complex types such as Curves, Meshes or Breps. I do not know if they ever will.
I've tried making the sliders and tumblers (the controls, not the canvas objects) easier to use. Basically it should now be obvious based on the display whether a slider or tumbler has focus. Slider have a dotted rectangle drawn in them when focused, tumblers are drawn as 3D objects instead of flat objects). When a slider or tumbler has focus, just typing should automatically bring up the text input override. Please test that this works as advertised and is not 'weird'.
Note to GHA developers: The Internal_Icon_24x24 property on Components and Custom object is now Obsolete. It still exists for the time being, but you are advised to use the Icon property instead.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
8.3.0 ************* IDF Context for following error/warning message: ************* Note -- lines truncated at 300 characters, if necessary... ************* 829 Construction, ************* indicated Name=PELLE001 ************* Only last 10 lines before error line shown.....
************* 832 AIR WALL2, !- - Layer 2 ************* 833 X-LAM, !- - Layer 3 ************* 834 POLYSTYRENE2, !- - Layer 4 ************* 835 PANNELLO VIP, !- - Layer 5 ************* 836 POLYSTYRENE2, !- - Layer 6 ************* 837 X-LAM, !- - Layer 7 ************* 838 LANA DI ROCCIAS, !- - Layer 8 ************* 839 VANO IMPIANTI, !- - Layer 9 ************* 840 LANA DI ROCCIAS, !- - Layer 10 ************* 841 LASTRA IN GESSOFIBRA, !- - Layer 11 ** Severe ** IP: IDF line~841 Error detected for Object=CONSTRUCTION ** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<- ************* IDF Context for following error/warning message: ************* Note -- lines truncated at 300 characters, if necessary... ************* 985 Construction, ************* indicated Name=ROOF001 ************* Only last 10 lines before error line shown..... ************* 988 TRAVETTI, !- - Layer 2 ************* 989 TAVOLATO, !- - Layer 3 ************* 990 POLYSTYRENE2, !- - Layer 4 ************* 991 PANNELLO VIP, !- - Layer 5 ************* 992 POLYSTYRENE2, !- - Layer 6 ************* 993 X-LAM, !- - Layer 7 ************* 994 LANA DI ROCCIAS, !- - Layer 8 ************* 995 VANO IMPIANTI, !- - Layer 9 ************* 996 LANA DI ROCCIAS, !- - Layer 10 ************* 997 LASTRA IN GESSOFIBRA, !- - Layer 11 ** Severe ** IP: IDF line~997 Error detected for Object=CONSTRUCTION ** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<- ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details. ** Severe ** IP: Possible incorrect IDD File ** ~~~ ** IDD Version:"IDD_Version 8.3.0" ** ~~~ ** Version in IDF="8.3" not the same as expected="8.3" ** ~~~ ** Possible Invalid Numerics or other problems ** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination. ...Summary of Errors that led to program termination: ..... Reference severe error count=3 ..... Last severe error=IP: Possible incorrect IDD File ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning). ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors. ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors. ************* EnergyPlus Terminated--Fatal Error Detected. 1 Warning; 3 Severe Errors; Elapsed Time=00hr 00min 0.34sec
My question is how i can fix it ??? and why it tell me that:
** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:
Help me pleaseeeeeeee
Happy new year!!!!!…
8.3.0************* IDF Context for following error/warning message:************* Note -- lines truncated at 300 characters, if necessary...************* 829 Construction,************* indicated Name=PELLE001************* Only last 10 lines before error line shown.....
************* 832 AIR WALL2, !- - Layer 2************* 833 X-LAM, !- - Layer 3************* 834 POLYSTYRENE2, !- - Layer 4************* 835 PANNELLO VIP, !- - Layer 5************* 836 POLYSTYRENE2, !- - Layer 6************* 837 X-LAM, !- - Layer 7************* 838 LANA DI ROCCIAS, !- - Layer 8************* 839 VANO IMPIANTI, !- - Layer 9************* 840 LANA DI ROCCIAS, !- - Layer 10************* 841 LASTRA IN GESSOFIBRA, !- - Layer 11** Severe ** IP: IDF line~841 Error detected for Object=CONSTRUCTION** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<-************* IDF Context for following error/warning message:************* Note -- lines truncated at 300 characters, if necessary...************* 985 Construction,************* indicated Name=ROOF001************* Only last 10 lines before error line shown.....************* 988 TRAVETTI, !- - Layer 2************* 989 TAVOLATO, !- - Layer 3************* 990 POLYSTYRENE2, !- - Layer 4************* 991 PANNELLO VIP, !- - Layer 5************* 992 POLYSTYRENE2, !- - Layer 6************* 993 X-LAM, !- - Layer 7************* 994 LANA DI ROCCIAS, !- - Layer 8************* 995 VANO IMPIANTI, !- - Layer 9************* 996 LANA DI ROCCIAS, !- - Layer 10************* 997 LASTRA IN GESSOFIBRA, !- - Layer 11** Severe ** IP: IDF line~997 Error detected for Object=CONSTRUCTION** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<-** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:..... Reference severe error count=3..... Last severe error=IP: Possible incorrect IDD File************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.************* EnergyPlus Terminated--Fatal Error Detected. 1 Warning; 3 Severe Errors; Elapsed Time=00hr 00min 0.34sec
My question is how i can fix it ??? and why it tell me that:
** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:
Help me pleaseeeeeeee
Thanks and Happy new year!!!!!…