a value.
In this case it will be between position 86 and 87 where the x value of a point jumps from 2.32... to -6.04... (see inside red rectangle @ attached image).
Idea so far is:
1) Decompose the list into x,y,z
2) get just the x values in one list
3) compare all values in a kind loop.
4) if value difference is more that let's say 1.0 - get the index
5) split list at that index.
My question: How to do that without looping?
I would be very thankful is someone could give me a hint.
Best, Boris.
…
Added by Boris Baehre at 5:33am on January 28, 2016
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
orking in Grasshoper v0.9.00xx (I tried, 9.0010 and 9.0014)
If I try this code
------------------------------------------------------------------------------
System.Globalization.CultureInfo oldCI = new System.Globalization.CultureInfo("en-US");
Object objExcel;
objExcel = System.Runtime.InteropServices.Marshal.GetActiveObject("Excel.Application");
objExcel.Cells(2, 1).Value = "titleA";
------------------------------------------------------------------------------
I see, the message
" Error: 'object' does not contain a definition for 'Worksheets' (line 95) "
Line 95 is the last one < objExcel.Cells(2, 1).Value = "titleA"; >
I've also tried,
Microsoft.Office.Interop.Excel.Application xlApp;xlApp = (Microsoft.Office.Interop.Excel.Application) System.Runtime.InteropServices.Marshal.GetActiveObject("Excel.Application");
But GH C# says
Error: The type or namespace name 'Office' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?) (line 89)
What did I wrong??
…
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016