it seems that was this. Now all is working fine !
Glad that it worked! But I am still a bit worried. Gismo components only modify the gdal-data/osmconf.ini file and no other MapWinGIS file. So your MapWinGIS installation files should not be compromised. The fact that you did not get the "COM CLSID" error message when running the "Gismo Gismo" component suggests that MapWinGIS has been properly installed. So I wonder if the cause for the permanent "invalid shapes" warning has again something with the fact that your system is again not allowing the MapWinGIS to properly edit the osmconf.ini. Maybe this problem will appear again, and again, and reinstallation of MapWinGIS every time can be somewhat bothersome.
- About the terrain generation, is it possible to have the texture from google or other provider mapped onto the terrain surface from gismo component ? (Same as using the ladybug terrain generator in fact). I try to used the image extracted by ladybug component and then applied it to the gismo terrain but the texture is rotated by 90°.
The issue with the rotation can be solved by swapping/reversing the U,V directions of the terrain surface. A slightly more important issue is that terrain surface generated with Gismo "Terrain Generator" component might have a bit smaller radius than what the radius_ input required. This stems from the fact that the terrain data first needs to be downloaded in geographic coordinate system, and then projected. Some projecting issues may occur at the very edges of the projected terrain, so I had to slightly cut out the very edges of the terrain which results in the actual terrain diameters being slightly shorted in both directions. This means that if you apply the same satellite image from Ladybug "Terrain Generator" component to Gismo "Terrain Generator" component the results may not be the same.I attached below a python component which tries to solve this issue by extending the edges of Gismo "Terrain Generator" terrain, and then cutting them with the cuboid of the exact dimensions as the radius_ input. Have in mind that this extension of the original terrain at its edges is not a correct representation of the actual terrain in that location. But rather just an extension of the isoparameteric curve of the terrain surface. So basically: some 0 to 10% (0 to 10 percent of the width and length) of the terrain around all four edges is not the actual terrain for that location, but rather just its extension.The python component is located at the very right of the definition attached below.
Also, if you would like to use the satellite images from Ladybug "Terrain Generator" component along with "OSM shapes", sometimes you may find slight differences in position of the shapes. This is due to openstreetmap data not being based on Google Maps (that's what Ladybug "Terrain Generator" component is using), but rather on Bing, MapQuest and a few others.
- About the requiredKeys_ input of OSM shapes, I understand what you mean and your advice, but in most cases I use it, the component was working fine even without input. I think it's better to extract all tags, values and keys of the selected area, instead of searching for specific ones as I try to find all data related to what I want after, isn't it ? To check what keys are present on the area also.
Ineed, you are correct.I though you were trying to only create a terrain, 3d buildings and maybe find some school or similar 3d building, for these two locations. The recommendation I mentioned previously is due to shapefiles having a limit (2044) to how many keys it can contain. This requires further testing of some big cities locations with maybe larger radii, which I haven't performed due to my poor PC configuration. But in theory, I imagine that it may happen that a downloaded .osm file may have more than 2044 keys. In that case shapefile will only record 2044 of them, and disregard the others. That was my point.But again 2044 is a lot of keys, and I haven't been checking much this in practice. For example, when I set the radius_ to 1000 meters, and use your "3 Rue de Bretonvilliers Paris" location I get around 350 something keys, which is way below the 2044.Another reason why one should use the requiredKeys_ input is to make the Gismo OSM components run quicker: for example, the upper mentioned 350 something keys will result in 350 values for each branch of the "OSM shapes" component's "values" output.Which means if you have 10 000 shapes, the "OSM shapes" component will have 10 000 branches with 350 items on each branch (values). This can make all Gismo OSM components very heavy, and significantly elongate the calculation process.With requiredKeys_ input you may end up with only a couple of tens of items per each branch.Sorry for the long reply.…
Added by djordje to Gismo at 8:57am on June 11, 2017
connected hyperspace where architecture can be fluid, flexible and vivid, yet the aspect of materiality requires more attention.
Action-designed structures begin to move beyond the utopian proposals of the 20th century’s manifestos and hold a place in the world of realized designs. The AA Athens Visiting School aims to bring users closer to the built environment while revisiting habits of designing, building and experiencing space through materiality. Understanding materiality and form as a ‘unified whole’, the programme integrates manufacturing techniques through the experimentation fabrication of prototypes at a 1:1 scale.
Prominent Features of the workshop/ skills developed
Participants become part of an active learning environment where the large tutor to student ratio allows for personalized tutorials and debates.
The toolset of the Athens VS includes but is not limited to Processing and Grasshopper for Rhinoceros, as well as design analysis software.
Participants gain hands-on experience on digital fabrication.
Design seminars and a series of lectures support the key objectives of the programme, disseminating fundamental computational techniques, relevant critical thinking, theoretical understanding and professional awareness.
Applications
1) You can make an application by completing the online application found under ‘Links and Downloads’ on the AA Visiting School page. If you are not able to make an online application, email visitingschool@aaschool.ac.uk for instructions to pay by bank transfer. 2) Once you complete the online application and make a full payment, you are registered to the programme. A CV or a portfolio is NOT required.
The deadline for applications is 28 June.
Location AKTO College – Athens Campus 11Α Evelpidon Street (Pedion Areos) Athens, 113 62, Greece
Fees
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting membership fee. Fees do not include flights or accommodation, but accommodation options can be advised.
Eligibility The workshop is open to current Undergrad and Graduate architecture and design students, PhD candidates and young professionals. Software Requirements: Adobe Creative Suite, Rhino 5.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
http://ai.aaschool.ac.uk/athens/
For inquiries, please contact:
alexandros.kallegias@aaschool.ac.uk…
ino al suo utilizzo per la risoluzione di tematiche di modellazione complessa di ARCHITETTURA e DESIGN.Durante le lezioni si insegneranno i comandi avanzati del software Rhinoceros ed inoltre i discenti, alla fine del percorso formativo saranno anche in grado di creare modelli attraverso il linguaggio della Plug-in avanzata Grasshopper(http://www.grasshopper3d.com/photo).
Il workshop si divide in due moduli che possono essere frequentati anche separatamente:
STRUTTURA
mod.1 _MODELLAZIONE BASE con Rhinoceros | Venerdì 14 Dicembre e Sabato 15 Dicembre | dalle 10,00 alle 19,00
Scadenza iscrizione: Lunedì 10 Dicembre
mod.2 _MODELLAZIONE AVANZATA con Rhinoceros e Grasshopper | Domenica 16 Dicembre e Lunedì 17 Dicembre | dalle 10,00 alle 19,00
Scadenza iscrizione: Mercoledì 12 Dicembre
SINTESI
mod.1 _MODELLAZIONE BASE con Rhinoceros
L’obbiettivo del corso è quello di insegnare in tempi brevi, gli strumenti base della modellazione 2D e 3D e la renderizzazione dei modelli creati. Le ore saranno dedicate allo studio dell’interfaccia del software Rhinoceros e all’apprendimento dei comandi base per la gestione del documento di progetto; si approfondiranno i comandi più utilizzati per l’editing e la costruzione del disegno per arrivare alle operazioni booleane semplici e complesse. Inoltre si imparerà a costruire e trasformare curve e superfici free-form. Le nozioni ed i metodi verranno trasmessi trattando temi e problematiche reali di design ed architettura.
mod.2 _MODELLAZIONE AVANZATA con Rhinoceros e Grasshopper
Il secondo modulo tratterà forme complesse implementando la modellazione avanzata di Rhinoceros con le potenzialità espresse dalla plug-in Grasshopper. La plug-in di Rhinoceros permette di disegnare abbandonando l’usuale interfaccia dei software di rappresentazione, consentendo un rapporto più diretto con il linguaggio proprio del computer: la programmazione. Questo cambiamento porta ad una radicale variazione del rapporto che il progettista ha con lo strumento di rappresentazione digitale. I partecipanti saranno orientati verso un nuovo rapporto con le forme create che oltre ad essere frutto di trasformazioni delle entità primitive che Rhinoceros propone, si costruiranno anche in relazione a parametri variabili.
Nel corso si imparerà a comporre algoritmi semplici, di carattere principalmente geometrico, in grado di generare forme e gestire i comportamenti delle stesse se sottoposte a variabili esterne.
In fine si imparerà a confrontarsi con un contesto evolutivo, che influenza i parametri della rappresentazione portando a dei modelli dinamici.
…
alità di Rhino, tra cui i comandi più avanzati per la creazione di superfici.
Struttura Le lezioni tratteranno in maniera sistematica argomenti riguardanti l'interfaccia utente, i comandi, la creazione e modifica di curve, superfici e solidi.
Risultati attesi Dopo questo corso lo studente dovrebbe essere in grado di: • Muoversi comodamente attraverso l’interfaccia di Rhino. • Identificare quando è richiesto modellare in maniera free-form o di precisione. • Creare e modificare curve, superfici e solidi. • Utilizzare ausili di modellazione per la precisione. • Produzione di semplici rendering per la visualizzazione dei modelli di Rhino.
Destinatari Questo corso è rivolto a progettisti e studenti che vogliono imparare in modo efficace i concetti e le caratteristiche del software di modellazione Rhinoceros. Le lezioni saranno ottimizzate ed esposte da un docente ART qualificato dalla McNeel. Alla fine del corso verrà rilasciata l’attestato di partecipazione ad un corso qualificato McNeel.
Prerequisiti Per affrontare il corso sono richieste competenze di Windows, passione e volontà di modellazione; precedenti esperienze di modellazione, anche con altri software, sono utili ma non indispensabili.…
ad informazioni provenienti dall’ambiente.
Il corso parte dalle conoscenze base di Grasshopper per la generazione ed il controllo delle geometrie e ha lobiettivo di arrivare a definizioni utili per concretizzare il modello virtuale in prototipo fisico attraverso tecniche di fabbricazione digitale. tutor: Amleto Picerno Ceraso
nb: è richiesta una conoscenza base di Grasshoppercosto: 250€ + IVAnumero minimo di partecipanti: 3deadline: 17 marzo
Per iscrizioni scrivi a info@medaarch.com specificando nome, cognome, mail, recapito telefonico e il nome del corso al quali sei interessato. In seguito all’invio del modulo di pre-iscrizione, i partecipanti riceveranno una mail contenente tutte le specifiche di pagamento.
Il cluster rientra in un fitto calendario di attività formative organizzate dalla Medaarch per lanno 2013-2014.…
is called TouchOSC (http://www.hexler.net/software/touchosc).
Basically, what TouchOSC does is sends a message over UDP, but it's formatted according to the OSC specification (http://opensoundcontrol.org/spec-1_0). Firefly (and Ghowl) both have UDP/OSC receivers (although they work slightly differently). Basically, you have a sender (your phone) and a receiver (your computer) and the sender has to know the IP address of the receiver and they both have to know which port they want to communicate on. The port can really be any number you want. So, when launching the TouchOSC app, you need to go into the settings and specify the IP address of your computer and the port you want to use. Then, just pick a layout and start moving sliders to send the data. On the Firefly side, just drop a OSC listener component onto the canvas and specify the same port number you put into the app. Then, connect a Timer component to the OSC listener to get it automatically refresh at a given interval. The data should come over as a data tree, and you can extract the header of the message, or the actual value using the standard Data Tree components.
The one thing you may want to know is that some networks will restrict communications over UDP (particularly those at schools, or other institutions). I would recommend starting out using your home router, which hopefully doesn't have these restrictions. If you do want to use it at a school, you may need to create an ad-hoc network and make sure your phone and computer are both on that same network. Other than that, it should be pretty straight forward. Hopefully this gets you started.
Cheers,
Andy…
ns. but first allow me to explain what i'm trying to do: i have a serial device i want to talk to, but i have to do it using some sort of handshaking. for instance, when i send a command/data, i need to wait for an appropriate response before sending another. i have used andy payne's general serial components from firefly, but i don't think they'll work for what i want to do, and in general, i want to know how to do this from scratch. i'm using the pyserial library to do the comm, and i can get it to work within one script. here's an example of a working (mostly) port open/close script (x=input param for baud, y=input param for port name, z=boolean input param for open/close):
import serialmyPort=serial.Serial()myPort.baudrate = xmyPort.port = yif z == True: try: myPort.open() except: print "Something went wrong. Cannot open port." if myPort.isOpen() == True: print myPort.name + " is open" if z != True: try: myPort.close() except: print "Something went wrong. Cannot close port." if myPort.isOpen != True: print myPort.name + " is closed"
this all works well and good. here are my questions:
1) I can open the port and then close it. however, if i try to re-open it, i get an access denied error. it seems rhino is holding the port open, as i have to re-start rhino to get it working again. i read through the discussions and didn't see any definitive answers to this problem. any advice?
2) I'd like to share this port with other components (or at least break up the functions of opening/closing the port and read/write, not unlike how the firefly components are organized), but i have no idea how to share an object instance between components. i did see that there is a sticky dict and tried to add myPort to it, but i kept getting errors in the other component when i try to use the object's methods. for instance:
Component 1 Script:
import serial
import scriptcontext
myPort=serial.Serial("COM4", 9600)
scriptcontext.sticky['myPort']=myPort
Component 2 Script:
import serial
import scriptcontext
myPort=scriptcontext.sticky['myPort']
print myPort.read()
but i get messages like:
Runtime error (MissingMemberException): 'Serial' object has no attribute '_port_handle'
any assistance would be greatly appreciated!!
best,
~BB~…
.
Today we have gone live, and the plugin is available on Food4Rhino. You will find an installer package, sample files, and a demo video on getting started:
http://www.food4rhino.com/project/human-ui
Visit the Bitbucket Repo and poke around in the code:
https://bitbucket.org/andheum/humanui
Check out today's coverage in Architect Magazine:
http://www.architectmagazine.com/technology/nbbj-releases-human-ui-to-bring-parametric-modeling-to-the-masses_o
Finally join our group and ask any questions or post any comments here:
http://www.grasshopper3d.com/group/human-ui
See below for detailed description!
----------------------------------
Human UI
Primary Development by:
Lead Developer: Andrew Heumann / andheum / @andrewheumann
Product Manager: Marc Syp / marcsyp / @mpsyp
Contributing Developer: Nate Holland / nateholland / @_NateHolland
Gone are the days of faking a user interface by laying out sliders and text panels and hiding wires on the Grasshopper canvas. Human UI interfaces are entirely separate from the Grasshopper canvas and leverage the power of Windows Presentation Foundation (WPF), a graphical subsystem for rendering user interfaces in the Windows environment.
OLD NEW
In other words: Human UI makes your GH definition feel like a Windows app. Create tabbed views, dynamic sliders, pulldown menus, checkboxes, and even 3D viewports and web browsers that look great and make sense to anyone--including designers and clients with no understanding of Grasshopper.
Human UI has been in development at NBBJ for over a year, as part of a larger NBBJ Design Computation initiative to deliver our tools internally as Products -- with fully automated installation, managed dependencies, analytics, documentation, and “magical” user experience. Human UI has been a huge component of the user experience part of this puzzle, and we are excited to share it with the larger Grasshopper community so that others can benefit from it and contribute to its development.
The initial release of Human UI is accompanied by a few simple examples to get you started, but we have developed sophisticated user interfaces with these tools at NBBJ and will slowly be rolling out more advanced examples. We also look forward to opening up the development to the community and seeing what new features and paradigms we can add.
Download the plugin at Food4Rhino and get started building Custom UIs for Grasshopper right away! We are happy to answer any questions or field discussion in the dedicated Grasshopper Group. Please join us!
Join the Grasshopper Group
http://www.grasshopper3d.com/group/human-ui
Download the plugin + sample files
http://www.food4rhino.com/project/human-ui
Visit the Bitbucket Repo
https://bitbucket.org/andheum/humanui
We look forward to seeing where this project takes you, please share your projects made with Human UI!
Sincerely,
Design Computation Leadership Team, NBBJ
…
io, alle ore 19:30 presso la Mediateca MARTE di Cava de’ Tirreni (Sa), la lecture magistralis dell’arch. Walter Nicolino dal titolo “Augmented visions / Responsive spaces”, un viaggio culturale che, attraversando gli studi progettuali a diverse scale condotti tra la sede torinese e il centro ricerca di Boston, mette in luce una attitudine nell’indagare e nel dar forma alle interazioni tra le persone, gli oggetti e gli spazi, al fine di fornire possibili risposte alle nuove istanze poste dalla rivoluzione digitale.
In apertura i saluti istituzionali del sindaco Marco Galdi, mentre a introdurre la lecture l’arch. Amleto Picerno, promotore del Mediterranean FabLab di Cava de’ Tirreni e tutor della Summer School digitalMed, il laboratorio progettuale che da quattro anni a questa parte, indaga temi, pratiche e tecniche dell’attuale panorama architettonico internazionale. È la smart city al centro della IV edizione di Summer School Digitalmed 2013, che si svolge a Salerno dal 22 al 28 luglio con l’obiettivo di creare un sistema di relazioni e di interazioni continue tra la città, le persone e l’ambiente in cui queste si rapportano in un continuo scambio di informazioni.
Ad esprimere la critic ai prototipi di progetto che emergeranno dal workshop digitalMed, sarà proprio Walter Nicolino, architetto di spicco del panorama italiano, coinvolto in numerosi progetti di ricerca al Senseable City Lab del MIT di Boston, insieme all’arch. Carlo Ratti con cui è fondatore e socio dello studio torinese CARLORATTIASSOCIATI.
Il 26 luglio lo space 1.0 della Mediateca MARTE di Cava de’ Tirreni si fa, dunque, arena d’avanguardia per un interessante dibattito durante il quale, a proposito della Summer School digitalMed, si ragionerà anche sul modo in cui le tecnologie digitali influenzano l’architettura.
«Da qualche tempo a questa parte possiamo scegliere se orientarci alla perfezione tramite navigatori GPS o perderci come sognanti flâneur metropolitani; possiamo associare in un batter d'occhio infiniti layers di dati a un luogo, oppure contemplarne in silenzio il paesaggio; possiamo anticipare la realtà con sofisticate rappresentazioni virtuali, oppure esercitarci in giocose autocostruzioni partecipate.
Possiamo avere l'una e l'altra cosa: non si tratta di una scelta tra il mondo reale e quello virtuale, come predetto da parte della letteratura agli albori dell’era digitale, ma si tratta di capire come il nostro ambiente costruito e gli spazi in cui viviamo stiano imparando a parlare un nuovo linguaggio e ad interagire in modo sempre maggiore con le persone - afferma Walter Nicolino che parafrasando Le Corbusier “La civilisation digitale cherche et trouvera son expression architecturale”, sottolinea l’importanza di integrare le nuove tecnologie e radici locali senza perdere la visione e la dimensione umana della città: All’architettura è richiesta una revisione dei propri strumenti per creare spazi flessibili, inclusivi, in grado di adattarsi ai nuovi modi di vivere e lavorare e di rispondere in modo interattivo alle nostre esigenze».
…
ppresentazione di modelli per l’architettura ed il design, verso un apprendimento d' alto livello delle tecniche di modellazione parametrica 3D.
Il corso si svolgerà nei seguenti giorni:
Sabato 19/10 dalle 10.00 alle 19.00
Domenica 20/10 dalle 10.00 alle 19.00
Scadenza preiscrizione: 16/10
Contenuti
Durante questo corso, attraverso l' uso di tecniche avanzate di modellazione Nurbs,
si potranno costruire modelli tridimensionali complessi che permetteranno di comprendere le tematiche legate alle forme complesse dell’architettura.
Particolare attenzione verrà data allo studio delle superfici a doppia curvatura, alle superfici rigate e alle superfici sviluppabili, quest’ultime adatte alla creazione di manufatti rivolti alla produzione. Allo studio delle superfici sarà affiancata la logica della loro tassellazione, quindi il passaggio da entità continue ad entità discrete, indagandone il valore attraverso esercitazioni pratiche.
Per comprendere meglio le finalità pratiche della tassellazione verrà adoperata una plug-in integrativa specifica per questo tipo di operazione: Paneling Tools. Le lezioni pratiche saranno arricchite da brevi comunicazioni teoriche utili a perseguire l’obiettivo della costruzione di modelli complessi. Sintesi programma
Costruzione di superfici free-form facilmente editabili attraverso tecniche di sculpting ed una gabbia adeguata di punti di controllo;
Presentazione e spiegazione delle superfici a doppia curvatura, rigate, sviluppabili e loro pannellizzazione attraverso elementi lineari o tasselli piani;
Studio della tassellazione attraverso la plug-in Paneling Tools per lo sviluppo di tasselli tridimensionali complessi;
Modellazione di un'architettura complessa, costruita avvalendosi della anche della tecnica del morphing.
Preparazione della mesh e del file per il rendering.
Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato e certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Docente del corso
Il corso è tenuto da un docente qualificato, con riconosciuta esperienza universitaria, esperto in disegno e rappresentazione dell' architettura e del design ed istruttore McNeel:
Michele Calvano|_architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART (Autorized Rhino Trainer) - [vedi CV]
Info
Per ulteriori informazioni di carattere didattico sono a disposizione i seguenti contatti: Responsabile didattico: arch. Michele Calvano
Info mail: parametricart@gmail.com
cell: 340 3476330
…