here are my questions.
1. The difference in general attractor transition is that, i only want the points are moving toward x axis, so if i just have ONE curve to distinguish, which is'nt the problem to find points location are in the right of left side of curve, but if i have TWO or THREE curves need to be distinguished, that is totally confused to me!
2. The points near curve which moved too big, how can i make it more equal?
3. I hope all the points can stay in the square boundary.
If anyone can give me some hint, i would be very appreciate with that.
thanks a lot!!
Shaun
…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.edizionilepenseur.it…
see in my bottom post image there is only one isocurve showing in U and V.
In Grasshopper there's no surface rebuild? Well, the same old Grasshopper Patch command will let you specify spans I guess, to make a surface from a planar curve, but it won't work for things with holes since they will just fill in!
You can recreate a surface painfully by untrimming, adding many UV points, rebuilding from those points, then retrimming with the original surface info, but the retrimming simply fails.
If you make a planar surface from a curve in Rhino, you end up with utterly no point editability:
No wonder my CreatePatch tests were a failure. The starting surface could not be distorted except in the extreme case of moving four corner points!
I have no idea how to successfully rebuild a surface akin to the Rhino rebuild command. It's great to be able to prototype in Grasshopper, but with Python I can rebuild easily ( http://4.rhino3d.com/5/rhinocommon/?topic=html/M_Rhino_Geometry_Surface_Rebuild.htm ;), so I guess I should start a collection, like peter, of little script components for prototyping with.…
Added by Nik Willmore at 6:18am on February 26, 2016
ss lots of questions,Hope guys show me some more different ways to figure out thoes kinds of problems,Thanks.
That is a construction project,the balconies should be overhang between 1 to 3 meters.
Program A is a patten consist of increasing balconies as the floors get upper.(In the picture is 29 at the first floor and ended with 2 more balconies for each floor, )Each part for a different floor,the twelfth floor have 29+(12-1)*2=51 balconies.
Questions From A,
A1:How to use the {(series)} to creat this atrium,As the floors increase the number of the balconies change by arithmetic progression.
A2:How to control the angle of the balconies,both the angle with floor and the balconies ending part.
Program B is use line to shape the commercial atrium,program A is more small pieces of rectangles.The {(TweenCrv)} command.
Questions From B,
B1:How to draw random points between the 1 to 3 meters region of the balcony,And those point form a shape also belongs to that region.
B2:Use a curve or other ways to control the changing speed of each floors' balcony.Right now the balcony is a Linear change.
Thanks for your Help.
Q1:Is there a way in Grasshopper to control the model to Modulus,less different unit parts to build such a Atrium.(For Exanple,only use 900mm and 600mm two different width of the Glass railings to bulid the model A OR B)…
on this, but to my understanding, the Δt_pr used is the same - the equations used to calculate are not. Take a look at this (from EN 7730 as well):
If I can make some wishes too; it would be cool, if you included the last local comfort metrics from EN7730 in LB/HB as well. Besides the local asymmetry there are: an equation for warm/cold floors, stratification and draught. I know, that you will need preform a CFD simulation to properly calculate stratification and draught, but the comfort equations are really simple and seeing that you have(might have) a CFD tool under way it could be useful. Anyways I think it would possible to import external generated CFD data to grasshopper.
The pictures in my previous post are from a paper called: "A simplified calculation method for checking the indoor thermal climate" by B.W. Olesen, it can be found in ASHRAE 1983, vol. 25, issue 5. I don't know if there have been any updates to it since '83.
Looking forward for the new components, and if there is anything I can help with please let me know.
/Christian
…
th one element which is a list of 10 numbers?
I can flatten it and get (I think) a list of 10 elements (even though when I hover over the output of "Flatten" it says "Tree(T) as tree"). I'm surprised I can flatten at all what would appear to common sense to be a simple list of 10 numbers.
I'm hoping that if I can get this answered it will become obvious why we have trees of lists rather than just lists of lists as you would in most computer languages. That's my real goal - to understand the purpose of adding what seems like an unnecessary complication - trees - to the concept of lists in GH. It seems to me as though a "tree" is just a list of other "trees" until you get to the leaves where you can have "lists" which are identical to trees but can have something other than a tree in them. Whether you can have lists of trees or trees with no lists I'm unclear on. Do the leaves of trees have to be lists? Do lists have to be contained in trees? It would appear from the series example where a tree is produced for no obvious reason to contain the list that this is the case but given that you can flatten it, I guess not - or is the "List" I see in the param viewer just another type of "tree"?
I've found many tutorials that talk about how to manipulate trees and lists and I've managed to get along fairly well with them so far, but nothing seems to explain the reasoning behind the existence of trees and the philosophy for how and when they should be used and when lists should/could be used and precisely what the difference is between them.
Sorry to be long winded but I'm so confused!
Darrell Plank
P.S. I've seen David Rutten's diagram with the colored leaves in Grasshopper Primer 2 and that seems helpful. It would appear that trees can only have lists at their leaves and lists can't have trees although I'm not sure that it comes out and says that directly but at least there are no examples of this shown in his tree diagram. I thought I had it down pretty much so decided to test myself. Apparently I'm as confused as ever:
It certainly appears to me that this tree has two levels - a first level with one limb and a second with 10 limbs - and that I should be able to index it with {0;0} and retrieve a tree with one item in it - the list {0}. The panel data seems to confirm this with indices of {0;0;0}, etc. so I put this path in with quite a bit of confidence that it would work and...bust. The error reads "Path {0;0} does not exist within this tree". Huh? Again, I'm just so confused.…
Added by Darrell Plank at 12:17am on January 20, 2015
te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …
onsidered period.
Even if the end of July for the mediterranean climate is not the best period to perform an adaptive comfort analysis (it's just a pretest to define a LB model) I want to refine the Adaptive comfort Chart (AC) by changing the external air temperature data imported from the .epw file with that of monitored data as reported here below:
Where the monitored ext air temperature are in this form (green panel below):
I have used the comfortPar component to set the following parameters:
Adaptive chart as defined by EN 15251
90% of occupants comfortable
the prevailing outdoor temperature from a weighted running mean of the last week
fully conditioned space (even if it is not properly in line with AC as already discussed)
The question is this: the AC component could correctly apply the code below if there is only a list of external temperature data for a restricted period (without indication about the limits of this period) and not for an entire year?
else: #Calculate a running mean temperature. alpha = 0.8 divisor = 1 + alpha + math.pow(alpha,2) + math.pow(alpha,3) + math.pow(alpha,4) + math.pow(alpha,5) dividend = (sum(_prevailingOutdoorTemp[-24:-1] + [_prevailingOutdoorTemp[-1]])/24) + (alpha*(sum(_prevailingOutdoorTemp[-48:-24])/24)) + (math.pow(alpha,2)*(sum(_prevailingOutdoorTemp[-72:-48])/24)) + (math.pow(alpha,3)*(sum(_prevailingOutdoorTemp[-96:-72])/24)) + (math.pow(alpha,4)*(sum(_prevailingOutdoorTemp[-120:-96])/24)) + (math.pow(alpha,5)*(sum(_prevailingOutdoorTemp[-144:-120])/24)) startingTemp = dividend/divisor if startingTemp < 10: coldTimes.append(0) outdoorTemp = _prevailingOutdoorTemp[7:] startingMean = sum(outdoorTemp[:24])/24 dailyRunMeans = [startingTemp] dailyMeans = [startingMean] prevailTemp.extend(duplicateData([startingTemp], 24)) startHour = 24
…
derstanding of the graphical algorithm editor, and then dive into more complex parametric models. We’ll also learn tricks to keep our project responsive and enjoyable to use.Course outline
covering similar content as the first part of the primer(http://www.grasshopper3d.com/page/tutorials-1)
novel material
duration: 3 days (24 hours)
Including
An understanding of the Grasshopper interface and the visual programming theory
Base parameters, large numbers of points and vectors, and small geometrical instances
Data flow
Troubleshooting definition problems and solutions
Know the main component types
Be able to join, and manage connections and trees
Expressions for both calculation and boolean creation
Understand Data Matching and casting
Managing long lists of objects within Grasshopper
Have an understanding of the functioning of Grasshopper components
Experience creating definitions
Parametric geometry examples, like attractors and list culling
Re-utilizable modeling examples: colored panelization, surface population, gradient and picture sampling and manipulation, catenary line and weaving
Spline animation examples
Getting ready to prepare own definitions in groups
More information...
…