problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
ns. but first allow me to explain what i'm trying to do: i have a serial device i want to talk to, but i have to do it using some sort of handshaking. for instance, when i send a command/data, i need to wait for an appropriate response before sending another. i have used andy payne's general serial components from firefly, but i don't think they'll work for what i want to do, and in general, i want to know how to do this from scratch. i'm using the pyserial library to do the comm, and i can get it to work within one script. here's an example of a working (mostly) port open/close script (x=input param for baud, y=input param for port name, z=boolean input param for open/close):
import serialmyPort=serial.Serial()myPort.baudrate = xmyPort.port = yif z == True: try: myPort.open() except: print "Something went wrong. Cannot open port." if myPort.isOpen() == True: print myPort.name + " is open" if z != True: try: myPort.close() except: print "Something went wrong. Cannot close port." if myPort.isOpen != True: print myPort.name + " is closed"
this all works well and good. here are my questions:
1) I can open the port and then close it. however, if i try to re-open it, i get an access denied error. it seems rhino is holding the port open, as i have to re-start rhino to get it working again. i read through the discussions and didn't see any definitive answers to this problem. any advice?
2) I'd like to share this port with other components (or at least break up the functions of opening/closing the port and read/write, not unlike how the firefly components are organized), but i have no idea how to share an object instance between components. i did see that there is a sticky dict and tried to add myPort to it, but i kept getting errors in the other component when i try to use the object's methods. for instance:
Component 1 Script:
import serial
import scriptcontext
myPort=serial.Serial("COM4", 9600)
scriptcontext.sticky['myPort']=myPort
Component 2 Script:
import serial
import scriptcontext
myPort=scriptcontext.sticky['myPort']
print myPort.read()
but i get messages like:
Runtime error (MissingMemberException): 'Serial' object has no attribute '_port_handle'
any assistance would be greatly appreciated!!
best,
~BB~…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
t. So here we go!
1. Honeybee is brown and not yellow [stupid!]...
As you probably remember Honeybee logo was initially yellow because of my ignorance about Honeybees. With the help of our Honeybee expert, Michalina, now the color is corrected. I promised her to update everyone about this. Below are photos of her working on the honeybee logo and the results of her study.
If you think I'm exaggerating by calling her a honeybee expert you better watch this video:
Thank you Michalina for the great work! :). I corrected the colors. No yellow anymore. The only yellow arrows represent sun rays and not the honeybee!
2. Yellow or brown, W[here]TH Honeybee is?
I know. It has been a long time after I posted the initial video and it is not fun at all to wait for a long time. Here is the good news. If you are following the Facebook page you probably now that the Daylighting components are almost ready.
Couple of friends from Grasshopper community and RADIANCE community has been helping me with testing/debugging the components. I still think/hope to release the daylighting components at some point in January before Ladybug gets one year old.
There have been multiple changes. I finally feel that the current version of Honeybee is simple enough for non-expert users to start running initial studies and flexible enough for advanced users to run advanced studies. I will post a video soon and walk you through different components.
I think I still need more time to modify the energy simulation components so they are not going to be part of the next release. Unfortunately, there are so many ways to set up and run a wrong energy simulation and I really don’t want to add one new GIGO app to the world of simulation. We already have enough of that. Moreover I’m still not quite happy with the workflow. Please bear with me for few more months and then we can all celebrate!
I recently tested the idea of connecting Grasshopper to OpenStudio by using OpenStudio API successfully. If nothing else, I really want to release the EnergyPlus components so I can concentrate on Grasshopper > OpenStudio development which I personally think is the best approach.
3. What about wind analysis?
I have been asked multiple times that if Ladybug will have a component for wind study. The short answer is YES! I have been working with EFRI-PULSE project during the last year to develop a free and open source web-based CFD simulation platform for outdoor analysis.
We had a very good progress so far and our rockstar Stefan recently presented the results of the work at the American Physical Society’s 66th annual DFD meeting and the results looks pretty convincing in comparison to measured data. Here is an image from the presentation. All the credits go to Stefan Gracik and EFRI-PULSE project.
The project will go live at some point next year and after that I will release the Butterfly which will let you prepare the model for the CFD simulation and send it to EFRI-PULSE project. I haven’t tried to run the simulations locally yet but I’m considering that as a further development. Here is how the component and the logo looks like right now.
4. Teaching resources
It has been almost 11 months from the first public release of Ladybug. I know that I didn't do a good job in providing enough tutorials/teaching materials and I know that I won’t be able to put something comprehensive together soon.
Fortunately, ladybug has been flying in multiple schools during the last year. Several design, engineering and consultant firms are using it and it has been thought in several workshops. As I checked with multiple of you, almost everyone told me that they will be happy to share their teaching materials; hence I started the teaching resources page. Please share your materials on the page. They can be in any format and any language. Thanks in advance!
I hope you enjoyed/are enjoying/will enjoy the longest night of the year. Happy Yalda!
Cheers,
-Mostapha
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
eaningful. Humans must interact with it. Information arises when humans examine the data. Knowledge is created when information is transformed through human social interactions.”
Richard Gayle via spacecollective
The space in which we live can be monitored in many aspects and appears to be to be a gradient of data in continuous evolution and change. One of the major advantages of parametric tools is to be able to inform the design processes with accurate, specific and variable, in space and time, data streams .
DATA BODIES is a Grasshopper workshop that will focus on how its nature as an information processor and how it can be (ab)used in order to manipulate data, streaming inputs from various sources and use datafeeds to inform geometry or data structures from the very simple up to more complex ones. The aim is to give an understanding of information and data articultion as already a spatial and architectural operation; results may range from pure data communication protocols, dataviz or data-driven geometries depending on the skill levels and aspirations of each participant. The brief is also open to the suggestions and opportunities that may rise during the workflow.
DETAILS: http://www.superbelleville.org/dataworkshop/…
DP ($$$ aside), GC, and Grasshopper. Arthur’s original question is very important
and the exact question (and hopefully answer) I was hoping to find on a
forum.
“How to take intelligent 3D parametric generative design models (scripting, etc.) into 2D documents?" Or, deliver the 3D design for evaluation, bid, construction, etc.
I am intrigued by Jon’s comments in the same thread and would like to know how I can learn more about the process (and
pitfalls) of turning over a 3D digital generative models to a contractor/fabricator.
Are there any industry guidelines established I could use as a reference to guide our firm through this type of uncharted territory?
Arthur’s question is very reminiscent of 10 years ago when I was frustrated with the amount of time spent on the development of a 3D model design (physical and/or virtual) only to have to wipe the table clean and start the process all over again in 2D in order to document the project for delivery. From this I jumped head first into BIM and Revit, vowing never to go back to unintelligent 2D line work. I am now working on Bentley software (v8i: Microstation and Bentley Architecture) with the access and desire to venture into Generative Components. I am very intrigued by Rhino/Grasshopper primarily with the apparent ease of use and available resources assisting in the learning process – something not really available with Bentley.
In hindsight, as I am doing my software research I think the current use of Revit and BA (Bentley Architecture) are more of a “bridge”
between the past (decades of digital 2D work, i.e. AutoCAD) and where hopefully
we all will be someday in the near future (100% 3D modeling, i.e. Digital
Project??). Without having the experience
it would appear that DP/CATIA (PLM software) are closer to this than any other
type of software. As complicated as the
industry standards are for the automobile and airline industry, I feel we
(architectural industry and others) are heading in a similar direction with
total understanding (PLM/ Evidence Based Design) of a design (a whole other topic). If anything I think the market will begin to
demand it sooner or later.
Gehry (DP) article NY Times:
http://www.nytimes.com/2009/02/11/business/11gehry.html
I know these type of broad discussions (software vs. software) can be blown out of proportion on forums, but I am would like to read
the pulse of those who are already in the trenches (using Grasshopper, CATIA, Digital Project, Generative Components, others??) and hear your thoughts. Just as valuable would be other threads,
industry articles/reviews of 3D parametric generative design software.
Thanks,
Boyd…
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…