is possible to import data of a single cell then turn that into a line.
1) Is it possible to select a single cell in Excel and Import it to Grasshopper through the File Path or Read File function?
2) Can the value of the cell, say A2 = 45, be turned into the dimension of a line instead of a component of a point, or as the length of a vector?
3) Last would be if it is possible, could use the cells, A2 = 45; A4 = 20; A6 = 53, as the length, width and height dimensions, using the Geometry tool?
…
oxes in the most efficient way within boundaries of object and follow the following constraints. The Goal: To fit 125 boxes in the most efficient way inside the total area. Starting Variables: (1) 40% of the Boxes need to be between 60 and 85MSQ. (2) 40% of the boxes need to be between 86 and 110MSQ.
(3) 20% of the boxes need to be between 111 and 125mSQ. The breakdown doesn’t have to be exact to give the script some flexibility. Meaning you can have 41% +39% +20% = 100%.
Constraints:
1. A total MAXIMUM area of approximately 1600M per layer.
2. A maximum of 8 layers for a total of 12,800M per layer. Optimization can make as little or as many as 8 layers vertical to accommodate all boxes. So if script can achieve with 3 levels great. If needed all 8 levels, that's fine too. However, pay attention to next constraint (#3).
3. Approximately 15% of that space on each layer is off limits. (internal area) (blue area in example script) and the shape of the boundary cannot be modified to accommodate box design resulting in jagged lines for the internal area.
4. All generated squares/rectangles must have at least 3m touching an outside border (The Green lines).
5. All boxes must also be touching minimum 1M of border of the blue line.
6. If the boxes generated go outside the green boundary, they must be fillet to maintain the straight lines of the green boundaries.
7. Get as many of the boxes as possible a view towards the dots.
Could any one provide me a method or a way to start, if there are any useful links, please share with me. Thank you!…
Boxes in the most efficient way within boundaries of object and follow the following constraints.
The Goal: To fit 125 boxes in the most efficient way inside the total area. Starting Variables:
(1) 40% of the Boxes need to be between 60 and 85MSQ. (2) 40% of the boxes need to be between 86 and 110MSQ.
(3) 20% of the boxes need to be between 111 and 125mSQ. The breakdown doesn’t have to be exact to give the script some flexibility. Meaning you can have 41% +39% +20% = 100%.
Constraints:
1. A total MAXIMUM area of approximately 1600M per layer.
2. A maximum of 8 layers for a total of 12,800M per layer. Optimization can make as little or as many as 8 layers vertical to accommodate all boxes. So if script can achieve with 3 levels great. If needed all 8 levels, that's fine too. However, pay attention to next constraint (#3).
3. Approximately 15% of that space on each layer is off limits. (internal area) (blue area in example script) and the shape of the boundary cannot be modified to accommodate box design resulting in jagged lines for the internal area.
4. All generated squares/rectangles must have at least 3m touching an outside border (The Green lines).
5. All boxes must also be touching minimum 1M of border of the blue line.
6. If the boxes generated go outside the green boundary, they must be fillet to maintain the straight lines of the green boundaries.
7. Get as many of the boxes as possible a view towards the dots.
Could any one provide me a method or a way to start, if there are any useful links, please share with me. Thank you!
…
re is my problem... I need to arrange Boxes in the most efficient way within boundaries of object and follow the following constraints.
The Goal: To fit 125 boxes in the most efficient way inside the total area. Starting Variables:
(1) 40% of the Boxes need to be between 60 and 85MSQ. (2) 40% of the boxes need to be between 86 and 110MSQ.
(3) 20% of the boxes need to be between 111 and 125mSQ. The breakdown doesn’t have to be exact to give the script some flexibility. Meaning you can have 41% +39% +20% = 100%.
Constraints:
1. A total MAXIMUM area of approximately 1600M per layer.
2. A maximum of 8 layers for a total of 12,800M per layer. Optimization can make as little or as many as 8 layers vertical to accommodate all boxes. So if script can achieve with 3 levels great. If needed all 8 levels, that's fine too. However, pay attention to next constraint (#3).
3. Approximately 15% of that space on each layer is off limits. (internal area) (blue area in example script) and the shape of the boundary cannot be modified to accommodate box design resulting in jagged lines for the internal area.
4. All generated squares/rectangles must have at least 3m touching an outside border (The Green lines).
5. All boxes must also be touching minimum 1M of border of the blue line.
6. If the boxes generated go outside the green boundary, they must be fillet to maintain the straight lines of the green boundaries.
7. Get as many of the boxes as possible a view towards the dots.
Could any one provide me a method or a way to start, if there are any useful links, please share with me. Thank you!
…
sität der Kreativwirtschaft) den heurigen "3D Austria Tag" ankündigen zu dürfen:Vortragsprogramm:Einlass ab 9:009:30 – 10:30: Virtuelle Landschaften mit VUE xStream Vortragender: Helge Maus (pixeltrain)10:45 – 11:30: Interaktive Anwendungen mit Unity Pro Vortragender: Dietmar Godina (Playpublic)11:45 – 12:30: Praxisbeispiele & Neuheiten zu Rhino 5 Vortragende: Albert Wiltsche und Markus Manahl (TU Graz)12:30 – 13:15: Mittagspause13:15 - 14:00: Praxisvortrag: Architectural Rendering mit VRay, 3DStudio max und Photoshop Vortragender: Martin Frühwirth (Atelier Frühwirth)14:15 – 15:00: Praxisbeispiel: Mercedes A-Klasse Präsentation mit Cinema 4D & V-RAY Vortragender: Niki Vuckovic (immortal-arts)15:15 - 16:00: Praxistipps & Neuheiten zur Adobe CS6 Vortragender: Martin Dörsch (Adobe)16:15 – 16:30: Adobe Team Cloud & VIP Lizenzprogramm Vortragender: Markus Fiala (CG Shop)16:45 – 17:45: VFX-Workflow für Guerillas - Hollywood mit SynthEyes, Cinema 4D, und AfterEffects & Plugins Vortragender: Helge Maus18:00 Ende der VeranstaltungIm Foyer werden wir Infostände von Autodesk, Chaosgroup (V-RAY) und Rhino haben - nützen Sie die Gelegenheit und informieren Sie sich - neben den Vorträgen - auch persönlich an den Infoständen bei unseren Experten!Die Teilnahme ist KOSTENLOS, aufgrund der begrenzten Platzanzahl ist jedoch eine Anmeldung per e-mail an office@kkkc.at erforderlich.…
th the most crucial and imposing challenges that Mexico City faces and the ways in which architecture and urbanism can shape the metropolis at different scales. In these sense the progamme sees the city as a laboratory where the virtual and experimental tradition of the Architectural Association finds a fertile and concrete ground for the application of its methodology in Mexico.
“Manufactured Landscapes/Manufactured Urbanities” explores the metropolitan condition understood as a manufactured process by and for human beings. Henceforth the traditional opposing concepts, artificial vs nature, are replaced under the premise, nature does not exist, where nature is not natural but naturalised and the artificial is not an external or impose construct but manufactured intrinsically.
With this as a starting point the programme will study 2 instances of Mexico City’s “Manufactured Landscapes/Manufactured Urbanities”: The ravines in the west of Mexico City, last bastion of the existing “Nature” and its crucial role in the viability of Mexico City and social housing, as the fundamental construct of the “artificial” habitat in the metropolis´s urban tissue. These “Manufactured Landscapes/Manufactured Urbanities” and the ways in which they are designed, produced, reinvented regenerated, show a vast spectrum representative of the crucial urban conditions to be address and therefore they posed an enormous urban and architectonic challenge to confront in order to apply contemporary design methodologies.
To tackle the complexities of the “Manufactured Landscapes/Manufactured Urbanities”, the programme will immerse students and staff in a 10 day intensive workshop within a multidisciplinary environment where national and international experts from various fields will enrich their proposals. Students will work in architecture and/or urban scale teams and will critically assess the impact of their multiple scales interventions.
A backbone of lectures, talks and seminars, including local and international speakers, are designed to broaden and reflect the relevance and the importance of the topic for Mexico City. Finally a public exhibition of student’s work will be held at Centro Cultural de España in autumn 2013.
…
uired information, a poor representation of data evolve misreading messages and by turn ambiguous responses especially with complex data. Inforgraphics are graphic visual representations of information, data or knowledge intended to present complex information quickly and clearly. In the nowadays flow of complex information, Infographics is the key for optimized visual communication. The use of infographics is an important step towards developing a pedagogical approach that draws on visuals where 90% of Information is transmitted to the brain so it is crucial to tickle the optic nerves to get people excited about data. The workshop investigates how computational tools can aid in designing and controlling complex information to be easily understood in addition to improve cognition by utilizing graphics to enhance the human visual system’s ability to see patterns and trends and much more likely to be remembered in today’s fast – paced environment. This workshop investigates multiple computational tools and techniques of developing coefficient visualization of data types including; network, statistical and hierarchal data. The workshop objective is to reconsider visual representation a promising design tool for architects, artists and designers. /// Application To apply, please follow this link to fill the application form https://docs.google.com/forms/d/1HOv6c1_LzhHNJU5n_FLvuhC-Yg75HDfbEcq6TN6mulI/viewform /// Fees 1200 EGP for students / 1500 EGP for graduates and young professionals more info on the workshop webpage: http://www.encodestudio.net/#!infographics/cqvl
POSTS
…
ike using something like the Z vector, but technically you can use any vector you want. This vector will actually determine the static rotatation of all the planes, so you can control that here if you like. One important thing that I've noticed is that the closer the vector is to the plane of the curve or if its too similar to one of the tangent vectors, the more likely you'll have "flipping"
2) Take the cross product between the tangent and the static vector. This will be your first perpendicular vector, which you can use for the X component of the plane.
3) Take the cross product between the tangent and the result of the previous cross product. Use this result as the Y component of the plane. All three components (X, Y, and Z (which is the tangent vector)) are all perpendicular to each other now.
After you've done that you should have planes that decrease twisting. If your curve is not planar, then there will always be some twisting in the frames, but it will be minimal enough to use them effectively.
There also may be "flipping" within the frames, which means one (or both) of two things. First, you could have planes that have reversed their vectors, so the X vector is properly oriented, but pointing down when it should be pointing up. Second, the X and Y vectors could have potentially swapped, so that Y "should" be X and X "should" be Y. In order to check these things, you'll need to do a few tests. The first one is find out whether the vector (X or Y) of the plane your testing is pointing in the opposite direction of previous vector. The second test is to find out whether the vector (X or Y) of the plane your testing is perpendicular to the previous vector. In both cases, an angle test between the two vectors will be able to tell you what you need to know, but you will likely NEVER get exactly 180 for an opposite test or 90 for a perpendicular test. That means that you have to choose a range with which to determine that a given vector is opposite or perpendicular.
You should start testing the X vector to see if anything is wrong. If you find that the X vector is fine, then just move on because Rhino will only allow you to create right handed planes, and the Z vector (the tangent) will always be the same.
I don't believe that there's a native function within the old dotNET SDK for calculating angles, so use the example at the link below. It basically takes the arcCosine of the Dot Product of the two vectors your testing to return the angle in Radians. I'm not sure if this function is included in RhinoCommon or not....
http://wiki.mcneel.com/developer/sdksamples/anglebetweenvectors…
ed when membrane cones are invited to the party (then mesh (via Starling is the best way) the brep and send data to Kangaroo : the easiest thing to do). But patch doesn't trim the inner Loops and ... well initially I thought to find this in SDK and do the job:
Well... I confess that I can't get the gist of the Brep.Trim (as explained in SDK).
Thus go to plan B: having already the closed breps (the "cones") as cutters ... attempt a Boolean difference
but this does that (this looks to me a bit paranoid, but some reason must exist):
What I want is this:
the code that mess things is (open the script inside definition attached):
BTW: where in SDK is that DeBrep thing?
BTW: Delaunay GH syntax is still cryptic to me (but this is not an issue anymore)
I would greatly appreciate any help on that final step (to greatness).
The full working definition soon (v5: with 90% of components replaced by C# stuff).
best, Peter
…