ysim.ning.com/
When you run the simualtion you will notice on the batch terminal that Daysim is also being called, so you may want to consider how Daysim uses Radiance files & data.
Regarding your current problem, I think you stumbled onto something weird and interesting.
Interior and exterior readings appear to differ by 40 in the best case scenarios. Even setting the transmittance to 1 yields similar results. I tried changing from cummulative sky to climate sky and got similar values. Changing the test points did nothing either.
I think, (yet I'm too lazy to prove this) that the difference in values stems from diffuse radiation over the sky dome.
If you delete everything except the glass you'll notice that interior values are like 80-90% of the exterior values (this seems like the expected behaviour with a transmittance of 1). So, if we consider that a vertical window, part of an opaque box, is receiving radiation from 25% of a sphere, as you start to inset the interior test points the radiation they receive will be a fraction of the 25%.
Let me try to explain this better...The exterior surface receives radiation from a section of a sphere calculated by 180degrees on the xy plane (let’s call this angle theta) and by 90degrees (let’s call this angle phi) in azimuthal elevation. If you integrate this over spherical coordinates (theta from 0 to pi; phi from 0 to pi/2) you will find that it comes to a quarter of a sphere. By comparison, the interior surface will not integrate theta from 0 to 180degrees,nor phi from 0 to 90degrees, instead it will be the subtended angle from the exterior surface as a function of their separation; the farther in you go the smaller the view of the outside.
If my hypothesis is correct there shouldn't be that much difference since the separation is only 10cms...the subtended angle would be like 170 instead of 180 for theta and 85 instead of 90 for phi...overall if you integrate both spherical areas there should only by a difference of 10%.
In conclusion, I believe the unexpected behaviour stems from the previous subtended angle thing. If direct radiation was the only factor the difference would be the aforementioned 10%, which suggests that an additional source of energy is also affected by this. Perhaps indirect and diffuse radiation from other areas of the sky dome.
I’m definitely intrigued on why this is happening. Please post if you figure it out.
Regards,
Mauricio
…
TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
n make it possible to Motivation generate
a variety of interesting objects, from abstract fractals to plant-like
branching structures, their modeling power is quite limited. A major
problem can be traced to the reduction of all lines to integer multiples
of the unit segment. As a result, even such a simple figure as an
isosceles right-angled triangle cannot be traced exactly, since the ratio
of its hypotenuse length to the length of a side is expressed by the irrational
number √2. Rational approximation of line length provides only
a limited solution, because the unit step must be the smallest common
1
1
√2
denominator of all line lengths in the modeled structure. Consequently,
the representation of a simple plant module, such as an internode, may
require a large number of symbols. The same argument applies to angles.
Problems become even more pronounced while simulating changes
to the modeled structure over time, since some growth functions cannot
be expressed conveniently using L-systems. Generally, it is difficult
1.10. Parametric L-systems 41
to capture continuous phenomena, since the obvious technique of discretizing
continuous values may require a large number of quantization
levels, yielding L-systems with hundreds of symbols and productions.
Consequently, model specification becomes difficult, and the mathematical
beauty of L-systems is lost.
In order to solve similar problems, Lindenmayer proposed that numerical
parameters be associated with L-system symbols [83]. He illustrated
this idea by referring to the continuous development of branching
structures and diffusion of chemical compounds in a nonbranching filament
of Anabaena catenula.
The following is an example of its application:
starting string: A
p1: A F(1)[+A][-A]
P2: F(s) F(s*R)
which I think is basically trying to say
F(s) = move forwar a step of length s > 0.
Thanks again,
Mateo…
p, open to designers worldwide, will explore the parametric mix of new raw materials and the re-use of elements from Carnival floats and costumes, transforming them using generative design processes and new digitally fabricated joint components, to create interventions for micro-venues and urban furniture in the Porto do Rio region.
Taught by AA Staff, recent AA graduates, and computation and fabrication professionals, the studio-based workshop will include extensive instruction in Rhino Grasshopper (including GECO, and Galapagos, to integrate environmental optimization, simulation and parametric control) and digital fabrication processes using laser cutter, CNC-milling and rapid-prototyping machines, sponsored by DS4 and SEACAM, all of which will be used to produce one-to-one design prototypes.
MORE INFORMATION AND APPLICATION: http://rio.aaschool.ac.uk/andhttp://www.aaschool.ac.uk/STUDY/VISITING/rio.php…
ake a modest notice about the two new Ladybug components, one of which creates a 3d terrain shading mask and another one which visualizes and exports horizon angles. A terrain shading mask is essentially a diagram which maps the silhouette of the surrounding terrain (hills, valleys, mountains, tree tops...) around the chosen location, and account for the shading losses from the terrain. It can be used as a context_ input in mountainous or higher latitude regions for any kind of sun related analysis: sunlight hours analysis, solar radiation analysis, view analysis, photovoltaics/solar water heating sunpath shading...
My home town is an example of the shading caused by the terrain. Here is how it looks from the tallest building in the town:
And the created terrain shading mask:
A mask for any land location up to 60 degrees North can be created:
There will also be a support for a few major cities above this limit.
Both Terrain shading mask and Horizon angles components can be downloaded from here. An example .gh file can be found in here.
Component will prompt the user to download and copy certain files in order to be able to run.
It was created with assistance from Dr. Bojan Savric. Support on various issues was further given by: Dr. Graham Dawson, Dr. Alec Bennett, Dr. Ulrich Deuschle, Andrew T. Young, LiMinlu, Jonathan de Ferranti, Michal Migurski, Christopher Crosby, Even Rouault, Tamas Szekeres, Izabela Spasic, Mostapha Sadeghipour Roudsari, Dragan Milenkovic, Chen Weiqing, Menno Deij-van Rijswijk and gis.stackexchange.com community.
I hope somebody might find the components useful.…
rs interface og dykker derefter ned i mere komplekse parametriske modeller. Vi vil desuden arbejde med forskellige funktioner, der hjælper med til at gøre modeller mere responsive og interaktive.
Efter kurset vil du have/kende til:
Basale inputs og parametre, punkter og vektorer, og små geometriske eksempler
En forståelse for Grasshoppers interface og teorien bag den visuelle programmering
Kendskab til og forståelse af de væsentligste komponenttyper i Grasshopper
Matematiske principper, der giver mulighed for sortering gennem sandt/falsk og mindre-end/større-end udsagn
Dataflow: midlertidige og permanente data
Forene og styre data-input, samt en dybere forståelse af Grasshoppers datastyring.
Styring af lange data-lister og data-træer i Grasshopper
Eksempler på parametrisk geometri, som feks. attractorpoints
Brugen af Grasshopper som et panel værktøj, der giver mulighed for at beklæde overflader med paneler baseret på underindelinger, gradienter og attractor points
forberedelse af egne definitioner, med fortsat fokus på projektets responsibilitet.
…
on this, but to my understanding, the Δt_pr used is the same - the equations used to calculate are not. Take a look at this (from EN 7730 as well):
If I can make some wishes too; it would be cool, if you included the last local comfort metrics from EN7730 in LB/HB as well. Besides the local asymmetry there are: an equation for warm/cold floors, stratification and draught. I know, that you will need preform a CFD simulation to properly calculate stratification and draught, but the comfort equations are really simple and seeing that you have(might have) a CFD tool under way it could be useful. Anyways I think it would possible to import external generated CFD data to grasshopper.
The pictures in my previous post are from a paper called: "A simplified calculation method for checking the indoor thermal climate" by B.W. Olesen, it can be found in ASHRAE 1983, vol. 25, issue 5. I don't know if there have been any updates to it since '83.
Looking forward for the new components, and if there is anything I can help with please let me know.
/Christian
…
te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …