bout angle since the exact same wires can suddenly start working fine later! Just adding new items to Rhino and then using undo to get back to your failing geometry will fix it sometimes?! Flipping the pair of curves' directions, either one or both, fixes it. It's just black box broken. It happens for really boring angles near 90 degrees.
Rotating the entire pair in space has no effect.
Rescaling the lines from their joint point has no effect.
Simply cutting and pasting the lines out of Rhino back in *sometimes* fixes it, so it's angle and something else that makes certain lines "toxic."
Duplicating the pair of failed lines via alt-dragging the Rhino gumball fails to fix it.
Running the "line-like curves" through a Line component to give "lines" doesn't fix it.
Re-creating the lines by extracting endpoints fails to fix it.
Each line, if separated from each other works fine.
Grafting makes each line into its own little cylinder minus a hub.
The error is the boilerplate "Object reference not set to an instance of an object."
Once the pair spontaneously starts working I cannot reproduce the error with that pair again, though sometimes Rhino undo will get me back to failing.
CAN ANYBODY REPRODUCE THIS WITH MY FILE? If so I can submit a bug report.
Exoskeleton is here: http://www.grasshopper3d.com/group/exoskeleton
Source code is here but it's for compiling, not something I can just test in a C# component out of the box:
https://github.com/davestasiuk/Exoskeleton2/commit/f63c4aa691a7f26b...
…
s is like flattening your data PARTIALLY - chopping an index off the end of the branch paths without obliterating the tree entirely. When working with one "set" of input data, a flatten works to get these lists to match up - but when working with multiple sets, we need to be careful to preserve the original branch indices that keep all four of your original regions separate. As a rule, whenever you're feeding two data trees into any component, they should have the same number of branches. (or one should have branches and the other should be a flat list, in other cases).
The rule of thumb I tend to teach is this:
In 90% of cases...
For lists, all your inputs should either have 1 item or N items. That is to say, if you're feeding 4 items into one input and 9 items into another, something is probably wrong.
For trees, all your inputs should have either 1 branch or M branches. That is to say, if you're feeding a tree w/ branches {0;0} to {0;3} into one input, and a tree w branches {0;0;0} to {0;3;8} into the other input, something is probably wrong.
Grasshopper essentially matches up branches first, then lists second. By "matching" I mean it processes them together. Simple example of the Line component - it will match the first branch of points in the A input to the first branch of points in the B input, creating lines between those points, then match the second branches, the third branches, etc. THEN, it applies the same logic to the level of the list (with a pair of matched branches {0;2}, match all the items in those branches to each other - first item in one branch to the first item in the other branch, etc.)
This is a tricky concept but it seems like you're already well on your way to understanding it from your definition - "PShift" is a critical tool in your path management arsenal. I hope this (overly long) response helps clear things up for you!
…
he TOF and TSRF indices. They show, how "distant" is your _PV_SWHsurface from the optimal _PV_SWHsurface surface in terms of tilt and azimuth angles.However, in your case we are not interested in TOF and TSRF indices. We would just like to know what are the _PV_SWHsurface optimal tilt and azimuth angles, regardless of the supplied _PV_SWHsurface.
So the circular surface supplied to the "TOF" component's _PV_SWHsurface input is irrelevant. It can be of any area, and any tilt/azimuth angle.The PV_SWHsurfacesArea output of the "PV SWH system size" component depends on a couple of factors:moduleActiveAreaPercent_ (leave it at 90%).
moduleEfficiency_,
systemSize_.Calculation of systemSize_ depends on your electricity demand, cost of the PV system, type of the object, country, local regulations etc. This is something that an engineer needs to determine.For example, in USA for a residential house in the Sunbelt, depending on finances, a household would try to cover 100% of its annual electricity needs with their PV system. Which means that the systemSize_ you chose needs to cover the annual electricity consumption. You can perform EnergyPlus simulation or use any other way to get the annual electricity consumption.
Ladybug "Photovoltaics Performance" component can calculate the optimal systemSize_ by given the annual electricity consumption.However the component is made to address fixed tilt and azimuth PV systems only.An approximate way to overcome this is to calculate the optimal systemSize_ for fixed tilt and azimuth PV system, and then multiply it with the "difference in %s" panel at the very right of the fixed_vs_tracker_PV2.gh file. Again, this is not what Ladybug "Photovoltaics Performance" component is made to do, but it will probably get you in a ball park.
Inputted 32 degrees for north_ direction is actually 328 degrees.This is due to Ladybug Photovoltaics being based on NREL model which uses clockwise angles convention. This convention is also most commonly used in solar radiation analysis.
Dubai weather data files are uploaded in here.
…
you working on a PV system which will power a domestic hot water boiler?
To answer your questions:1) Each grasshopper component (ghpython being one of those too) is using grasshopper's data matching algorithm. This algorithm takes care of complex issues which may arise from combining lists with single items, data trees with different number of items per branch and so on.I think there is a way of introducing a call to other processor's threads per each inputted surface, but this will be a very difficult job, as it will require writing a custom data matching algorithm. I do not think I am up to that task.Instead I tried to introduce the multithread only to the final part of the PVsurface component and one of its time consuming parts: calculation of sun angles, solar radiation and ac/dc power output.I attached the test file below, but sadly it didn't go well: the multithreaded version mostly runs at the same time as the regular version.I do not think I am qualified enough to answer why is that so, but I think that it may have something to do with the type of the function that the multithreading is applied to: the code is suppose to run few separate functions a couple of thousand times, and work with a couple of lists. From my experience, the multithreading works the best when a single list or two are supplied to a single function. I may be wrong on this.I am very sorry to say that I can not implement this feature.2) I am not familiar if open source PV modules database has been released.But one can always download the data for specific modules from producers websites. It can then easily be transferred to a .csv file or other text file.Ladybug Photovoltaics are based on NREL's PVWatts model.In comparison with other commercial software applications, PVWatts offers a more generalized system model, with some of the values and characteristics being assumed or embedded.The Fuentes empirical thermal model we are currently using follows the same logic: it generalizes the Module characteristics. The following characteristics are only editable: module efficiency, temperature coefficient and module mount type.It may be possible to replace Fuentes with some other, less generalized 5 parameter thermal model. But as an architect, I would definitively need help on this.
Sorry if my reply did not fulfill your expectations, and thank you for the kind words!…
s levels of detail by subdividing a 6 sided cube mesh and projecting its vertices according to a referenced height map. This is one of the standard conventions for building full sizes planets. At the lowest level (0) the mesh planet is made of 6 pieces(each 32x32 resolution). The next level down (1) is made of 24 pieces... 6 divided by 4 = 24. Level (2) is 96 quads etc etc. The script will generate each quad at its sub-division level and compare edge vertices to neighboring quads. It will then make sure any shared vertices are in fact at the same projected vector. This ensures a planet quad with edge vertices that match.
The problems comes in texturing each quad.
If I build the quad as a nurb surface from points I can place the texture easily because each surface UV maps squarely to my texture map (which is also square).
If I build the quad as a mesh I cannot just apply the square texture to the mesh UVs. This is because when you unwrap the UVs from a mesh they will not unwrap like a nurb surface's UVs. Therefore to get the correct mapping I would have to manipulate each UV back to an evenly aligned array (which is 1024 points in a 32x32 resolution UV). Maya and blender have 'relax uv' and 'align UV' functions but they don't do the trick and manual corrections are out of the question. So why not skip the mesh method and use the nurb method?
I did this and there is a trade off. The nurb will accept the material texture I want with no other work on my end but when I export the object as an .obj rhino creates its own mesh to describe the nurb(with various unsatisfactory setting options). This works great up to a point because at some level the interpreted mesh will have vertices that do no match at the edges, ie .. creating visible seams in the mesh. The picture below is the nearly seamless planet at LOD(1) made of 24 quads, each with 32x32 vertice resolution and a 512x512 jpg texture running in Unity3d 5. It works but at close level there are seams. This will be resolved simply by having the next LOD(x) instantiate before getting close enough to see the seam but at core nerd level I want the seamless mesh.
So, I can make the seamless mesh but I can not realistically texture map it. I can also make the nurb surface from points and texture it at the expense of the edge vertices matching. I am at the split in the road but I want to have my cake and eat it too. Thoughts, comments, trolls...?
Thanks for reading =)
Footnote: For you pros I am not using seamless noise across the map I am using grasshopper to sew up my otherwise non perfect edges.
Other programs in the pipeline:
-WorldMachine 2
-Wilbur
-Photoshop
-Unity3d…
ect + Geco
TUTORS:
Arturo Tedeschi (Authorized Rhino Trainer) + Maurizio Arturo Degni
Il workshop avanzato ECOLOGIC PATTERNS affronta l’impiego di strategie parametriche all’interno del processo progettuale, approfondendo l’utilizzo di Grasshopper in sinergia con plug-in, software di analisi ambientale e simulazione fisica. Obiettivo fondamentale è la generazione della forma come risultato di tecniche di form-finding e di input ambientali (solari, termici e acustici). Verranno acquisiti nuovi strumenti operativi e di simulazione al fine di costruire modelli parametrici ottimizzati in grado di adattarsi a diverse condizioni di contesto.
MORE INFO…
ARRAY with certain spatial order or mechanism under consideration of ecological design. The evaluation and definition of “ARRAY” are open to applicants’ imaginations. While the term “ecological” is subjected to many definitions: social, ecological, sustainable, its re-evaluations are open to students’ interpretations. Entrants are free to choose or make site, real or virtual.
ELIGIBILITY
Open to international students in the fields of architecture and design related disciplines from an accredited four-year or five-year architecture program. Graduates with certificate in 2011 are accepted. Teamed collaboration consisting of no more than 3 students in the above mentioned fields is permitted. Works submitted must be of applicants’ original works. Works done through school studios are accepted, but limited to 2011 term.
ENTRY FEE
Free
DEADLINES
Online Registration deadline: Oct 30th, 2011, 17:00 Taipei Time
(Upon completing registration, applicant will receive a registration number via email.)
Submission deadline: email sent by Nov 3rd, 2011, 17:00 Taipei Time
SUBMISSION REQUIREMENTS
This is a digital competition and no hardcopies are necessary. Entrants must submit their proposal via email no later than Nov 3rd, 2011 17:00 (Taipei Time) to the following email address:
hojenhwang@mail.ntut.edu.tw
The project submission must contain the following files:
1. Two A1 boards in portrait format (594mm x 841mm), with identification number at the upper right corner. Names and other identifying information are not allowed on front side of the boards. The resolution of the boards must be 300dpi, RGB mode and saved as JPG files.. The files must be named after the registration number followed by the board number. For example: 03956-board1.jpg and 03956-board2.jpg.
2. A DOC file containing the project discription (600 words max). This file must be named after the registration number followed by the word "discription". For example: 03956-discription.doc.
3. A scan of statement form. This file must be named after the registration number followed by the word "statement_scan". For example: 03956-statement_scan.jpg.
4. All the files must be placed in a ZIP folder named after your registration number. For example: 03956.zip. Size of the ZIP folder is suggested to be less than 15mb, while size more than 25mb will not be accepted
AWARDS
(1) Gold Prize winner will be awarded TWD 60,000 and a trophy.
(2) Silver Prize winner will be awarded TWD 30,000 and a trophy
(3) Bronze Prize winner will be awarded TWD 15,000 and a trophy
(4) Honorable Mention winners will be awarded TWD 5,000 and a merit certificate
Winners will be announced and notified by mid of Nov, 2011.
JURY
Two stages of open jury. Details to be announced
PUBLIC EXHIBITION
Nov 13, 2011~ Nov 18, 2011 at NTUT, Taipei
…
Added by Yu-Min Su at 2:03am on September 23, 2011
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
(1) I have been exporting small sections of a larger model into Maya from Rhino as FBX. In Maya I rotate and scale the models (-90 in X, Scale XYZ 0.001). The Named Views are being saved, but do not have a successful import into the Maya model. They do not appear as in Rhino, and the problem is not solved by scaling or rotating the cameras.
(2) If I try going the other direction, the cameras exported from Maya as FBX are also not aligning with the model in Rhino as they are in Maya.. I will do my best to post some images of the problem and hope you can help.
error !!
This is what the named views look like
here I am trying to the other way with a good view from Maya
strange placement..
This is the best result I can achieve, after I scale the camera by 1000
Any Advice???
Thanks, Robert.
…