ion of both Ladybug and Honeybee. Notable among the new components are 51 new Honeybee components for setting up and running energy simulations and 15 new Ladybug components for running detailed comfort analyses. We are also happy to announce the start of comprehensive tutorial series on how to use the components and the first one on getting started with Ladybug can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O
A second one on how to use the new Ladybug comfort components can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v
Here is a short list highlighting some of the capabilities of this current Honeybee release:
1) Run EnergyPlus and OpenStudio Simulations - A couple of components to export your HBZones into IDF or OSM files and run energy simulations right from the grasshopper window! Also included are several components for adjusting the parameters of the simulations and requesting a wide range of possible outputs.
2) Assign EnergyPlus Constructions - A set of components that allow you to assign constructions from the OpenStudio library to your Honeybee objects. This also includes components for searching through the OpenStudio construction/material library and components to create your own constructions and materials.
3) Assign EnergyPlus Schedules and Loads - A set of components for assigning schedules and Loads from the Openstudio library to your Honeybee zones. This includes the ability to auto-assign these based on your program or to tweak individual values. You can even create your own schedules from a stream of 8760 values with the new “Create CSV Schedule” component. Lastly, there is a component for converting any E+ schedule to 8760 values, which you can then visualize with the standard Ladybug components
4) Assign HVAC Systems - A set of components for assigning some basic ASHRAE HVAC systems that can be run with the Export to OpenStudio component. You can even adjust the parameters of these systems right in Grasshopper.
Note: The ASHRAE systems are only available for OpenStudio and can’t be used with Honeybee’s EnergyPlus component. Also, only ideal air, VAV and PTHP systems are currently available but more will be on their way soon!
5) Import And Visualize EnergyPlus Results - A set of components to import numerical EnergyPlus simulation results back into grasshopper such that they can be visualized with any of the standard Ladybug components (ie. the 3D chart or Psychrometric chart). Importers are made for zone-level results as well as surface results and surfaces results can be easily separated based on surface type. This also means that E+ results can be analyzed with the new Ladybug comfort calculator components and used in shade or natural ventilation studies. Lastly, there are a set of components for coloring zone/surface geometry with EnergyPlus results and for coloring the shades around zones with shade desirability.
6) Increased Radiance and Daysim Capabilities - Several updates have also been made to the existing Radiance and Daysim components including parallel Radiance Image-based analysis.
7) Visualize HBObject Attributes - A few components have been added to assist with setting up honeybee objects and ensuing the the correct properties have been assigned. These include components to separate surfaces based on boundary condition and components to label surfaces and zones with virtually any of their EnergyPlus or Radiance attributes.
8) WIP Grizzly Bear gbxml Exporter - Lastly, the release includes an WIP version of the Grizzly Bear gbXML exporter, which will continue to be developed over the next few months.
And here’s a list of the new Ladybug capabilities:
1) Comfort Models - Three comfort models that have been translated to python for your use in GH: PMV, Adaptive, and Outdoor (UTCI). Each of these models has a “Comfort Calculator” component for which you can input parameters like temperature and wind speed to get out comfort metrics. These can be used in conjunction with EPW data or EnergyPlus results to calculate comfort for every hour of the year.
2) Ladybug Psychrometric Chart - A new interactive psychrometric chart that was made possible thanks to the releasing of the Berkely Center for the Built Environment Comfort Tool Code (https://github.com/CenterForTheBuiltEnvironment/comfort-tool). The new psychrometric chart allows you to move the comfort polygon around based on PMV comfort metrics, plot EPW or EnergyPlus results on the psych chart, and see how many hours are made comfortable in each case. The component also allows you to plot polygons representing passive building strategies (like internal heat gain or evaporative cooling), which will adjust dynamically with the comfort polygon and are based on the strategies included in Climate Consultant.
3) Solar Adjusted MRT and Outdoor Shade Evaluator - A component has been added to allow you to account for shortwave solar radiation in comfort studies by adjusting Mean Radiant Temperature. This adjusted MRT can then be factored into outdoor comfort studies and used with an new Ladybug Comfort Shade Benefit Evaluator to design outdoor shades and awnings.
4) Wind Speed - Two new components for visualizing wind profile curves and calculating wind speed at particular heights. These allow users to translate EPW wind speed from the meteorological station to the terrain type and height above ground for their site. They will also help inform the CFD simulations that will be coming in later releases.
5) Sky Color Visualizer - A component has been added that allows you to visualize a clear sky for any hour of the year in order to get a sense of the sky qualities and understand light conditions in periods before or after sunset.
Ready to Start?
Here is what you will need to do:
Download Honeybee and Ladybug from the same link here. Make sure that you remove any old version of Ladybug and Honeybee if you have one, as mentioned on the Ladybug group page.
You will also need to install RADIANCE, DAYSIM and ENERGYPLUS on your system. We already sent a video about how to get RADIANCE and Daysim installed (link). You can download EnergyPlus 8.1 for Windows from the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/?utm_source=EnergyPlus&utm_medium=redirect&utm_campaign=EnergyPlus%2Bredirect%2B1).
“EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings.”
“OpenStudio is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance.”
Make sure that you install ENERGYPLUS in a folder with no spaces in the file path (e.g. “C:\Program Files” has a space between “Program” and “Files”). A good option for each is C:\EnergyPlusV8-1-0, which is usually the default locations when you run the downloaded installer.
New Example Files!
We have put together a large number of new updated example files and you should use these to get yourself started. You can download them from the link on the group page.
New Developers:
Since the last release, we have had several new members join the Ladybug + Honeybee developer team:
Chien Si Harriman - Chien Si has contributed a large amount of code and new components in the OpenStudio workflow including components to add ASHRAE HVAC systems into your energy models and adjust their parameters. He is also the author of the Grizzly Bear gbxml exporter and will be continuing work on this in the following months.
Trygve Wastvedt - Trygve has contributed a core set of functions that were used to make the new Ladybug Colored Sky Visualizer and have also helped sync the Ladybug Sunpath to give sun positions for the current year of 2014
Abraham Yezioro - Abraham has contributed an awesome new bioclimatic chart for comfort analyses, which, despite its presence in the WIP tab, is nearly complete!
Djordje Spasic - Djordje has contributed a number of core functions that were used to make the new Ladybug Wind Speed Calculator and Wind Profile Visualizer components and will be assisting with workflows to process CFD results in the future. He also has some more outdoor comfort metrics in the works.
Andrew Heumann - Andrew contributed an endlessly useful list item selector, which can adjust based on the input list, and has multiple applications throughout Ladybug and Honeybee. One of the best is for selecting zone-level programs after selecting an overall building program.
Alex Jacobson - Alex also assisted with the coding of the wind speed components.
And, as always, a special thanks goes to all of our awesome users who tested the new components through their several iterations. Special thanks goes to Daniel, Michal, Francisco, and Agus for their continuous support. Thanks again for all the support, great suggestions and comments. We really cannot thank you enough.
Enjoy!,
Ladybug + Honeybee Development Team
PS: If you want to be updated about the news about Ladybug and Honeybee like Ladybug’s Facebook page (https://www.facebook.com/LadyBugforGrasshopper) or follow ladybug’s twitter account (@ladybug_tool).
…
user to understand. RhinoScript is a generally more straightforward and easy to use. You can think of it as a translation of RhinoCommon so that you don't have to write all the technical stuff.
In your first line you've said "import rhinoscriptsyntax as rs". To see the methods you can call from this library you can go to the help menu and choose 'Help for Rhinoscript'. It will show you a searchable window of all the the options you have. This is much easier for new users to learn than looking at the RhinoCommon SDK.
If you search the help file for 'BoundingBox' you'll get the screen capture below:
At the bottom you can see an example of how to use it. In your case you would replace the following lines:
2/ boxA=brepA.GetBoundingBox((0,0,0,)) --> boxA = rs.BoundingBox(brepA)
3/ boxB=brepB.GetBoundingBox((0,0,0,)) --> boxB = rs.BoundingBox(brepB)
The script you have written uses elements of both RhinoScript and RhinoCommonSDK. I would suggest you might start just using RhinoScript. See below, I have re-written the first 8 lines of your script using just RhinoScript:
import rhinoscriptsyntax as rs
#Get BoundingBox from breps.BoundingBoxA = rs.BoundingBox(brepA) #Returns list of eight corner points.BoundingBoxB = rs.BoundingBox(brepB)
#Get centre point of RhinoScript BoundingBox (which is a list of eight points).boxA = rs.AddBox(BoundingBoxA) #Generate box from corner pointsptA = rs.SurfaceVolumeCentroid(boxA) #Get Volumetric Centroid of boxboxB = rs.AddBox(BoundingBoxB) ptB = rs.SurfaceVolumeCentroid(boxB)
For reference the following will achieve the same thing using RhinoCommon, fewer lines, but more technical. There are a few other quirks as well, for example you have to explictly tell the python component what kind of object 'brepA' is. See below for example of same script in RhinoCommon:
import Rhino as rh
centerPtA = brepA.GetBoundingBox(rh.Geometry.Plane.WorldXY).CentercenterPtB = brepB.GetBoundingBox(rh.Geometry.Plane.WorldXY).Center
I'm not sure what you are trying to achieve overall and your loop doesn't make a lot of sense to me but I hope that clarifies some of the differences between the two libraries you can use.
Regards,
M…
h is attached below. it`s an arch, let`s say out of bricks with loads, represented with point loads which are taken from user-defined surfaces (to represent self-wight e.g).
goal of the study is to find a supporting arch which is inside the arch then (provided the strength of the bricks is high enough) the arch is ok -otherwise one have to change the geometry of the arch (make it thicker, or change the rise of the crown).
therefore i used kangaroo in combination with galapagos to find a catenary which fulfill the boundary conditions. it works very well. so the solution galapagos found is very satisfying.
it`s simple to prove the resulting forces in the arch if one knows the rise of the arch.
according to the formula N~ q*l^2/(8*f)
with q= 21 kn/m, l= 10.00 m and f= 0.965
one get N= 272 kn, which is very near on the solution which kangaroo founds in the middle of the arch (271 kn). due to the point loads this force have to get slightly higher the nearer one comes to the anchor points. this works perfect too.
but there is one irritating thing.
at the end of the catenary, near the anchor points, kangaroo gets two very different arch-forces. 281 kn in the next to last part. and 581 kn in the very last part. this is not possible and i am sure that the value of 581 kn is wrong. i calculated the example with a commercial fea-program too. it validates the kangaroo results except the first and the last one.
i think there is a problem with the calculated end length of the first (and last) element. they are twice too long as they have to be. or do i something wrong?
thank you for any reply and again for your work.
best peter
…
Added by pb to Kangaroo at 10:25am on October 22, 2011
Permalink Reply by Manuel Rodriguez 6 hours ago
Delete
yes!perfect! It has been a good example! The only thing that I would like to change is, that, instead of deform that following the control points on the surface's perimeter, I would like to deform all, with points in the shapes (in the middle of the circle for example). It is because I want, for example, the biggest circle in point 2, and the smaller circle in point 7. So, is it possible to do?
Summing up, is do the same, but changing the control points, putting them on the shapes (circles) instead the perimeter.
Thank you very much Danny and Chris, you are being really useful for me!
Thanks! Manuel
…
nd improvements. Many of the new features and components announced in the last release have become stable and have emerged from their WIP section. Additionally, after two years of work, we are happy to announce that we finally have full support of an OpenStudio connection within Honeybee, which has ushered in a whole host of new features, notably the modelling of detailed HVAC systems. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
LADYBUG
1 - Solar Hot Water Components Out of WIP
After much beta-testing, bug-fixing, and general development, all of the Photovoltaic and Solar Hot Water components are now fully out of WIP! The main component is based on a Chengchu Yan's publication. Components have been added to Ladybug thanks to the efforts of Chengchu Yan and Djordje Spasic.. See Djorje’s original release post of the solar hot water components for more information on the components that just made it out of WIP.
2 - New Terrain Shading Mask Released in WIP
In addition to Djordje’s prolific addition of renewable energy components, he has also contributed a widely-useful component to generate terrain shading masks, which account for the shading of surrounding mountains/terrain in simulations. While initially added to assist the solar radiation radiation and renewable energy components, the component will undergo development to optimize it for energy and daylight simulations over the next few months. Another new component called Horizon Angles can be used to visualize and export horizon angles. You can test them out now by accessing them in the WIP section. For more information, see Djordje’s release post on the GH forum here.
3 - New Mesh Selector Component
After realizing that the Optimal Shade Creator component has applications to a whole range of analyses, it has now been re-branded as the Mesh Selector and has been optimized to work easily with these many analyses. Specifically, the component selects out the portion of a mesh that meets a given threshold. This can be the portion of a shade benefit analysis meeting a certain level of shade desirability, the portion of a radiation study meeting a certain level of fulx, the portion of a daylight analysis meeting a certain lux threshold, and much more!
4 - Solar Adjusted Temperature Now Includes Long Wave Radiation
Thanks to a question asked by Aymeric and a number of clarifications made by Djordje Spasic, the Solar Adjusted Temperature component now includes the ability to account for long-wave radiative loss to the sky in addition to it original capability to account for short wave radiation from the sun. As such, the component now includes all capabilities of similar outdoor comfort tools such as RayMan. The addition of this capability is also paralleled by the addition of a new horizontalInfraredRadiation output on the ImportEPW component. See the updated solar adjusted example file hereto see how to use the component properly.
5 - Support for both Log and Power Law Wind Profiles
In preparation for the future release of the Butterfly CFD-modelling insect, the Ladybug Wind Profile component now includes the option of either power law or log law wind profiles, which are both used extensively in CFD studies. Thanks goes to Theodoros Galanos for providing the formulas!
6 - New Radiant Asymmetry Comfort Components
Prompted by a suggestion from Christian Kongsgaard, Ladybug now includes components to calculate radiant asymmetry discomfort! For examples of how to use the components see this example file for spatial analysis of radiant asymmetry discomfort and this example for temporal analysis.
7 - Pedestrian Wind Comfort Component Released in WIP
In preparation for the impending release of the butterfly CFD-modelling insect, Djordje Spasic with assistance from Liam Harrington has contributed a component to evaluate outdoor discomfort and pedestrian safety. The component identifies if certain areas around the building are suitable for sitting, building entrances-exits, window shopping... based on its wind microclimate. Dangerous areas due to high wind speeds are also identified.You can check it out now in the WIP section.
HONEYBEE
1 - New HVAC Systems and Full OpenStudio Support
After a significant amount of development on the part of the OpenStudio team and two years of effort on the part of LB+HB developers, we (finally!) have full support for an OpenStudio connection within Honeybee. By this, we mean that any energy simulation property that can be assigned to a HBZone will be taken into account in the simulation run by the OpenStudio component. The connection to OpenStudio has brought with it several new capabilities. Most notably, you can now assign full HVAC systems and receive energy results in units of electricity and fuel instead of simple heating and cooling loads. This Honeybee release includes 14 built-in HVAC template systems that can be assigned to the zones, each of which can be customized:
0. Ideal Air Loads 1. PTAC | Residential 2. PTHP | Residential 3. Packaged Single Zone - AC 4. Packaged Single Zone - HP 5. Packaged VAV w/ Reheat 6. Packaged VAV w/ PFP Boxes 7. VAV w/ Reheat 8. VAV w/ PFP Boxes 9. Warm Air Furnace - Gas Fired 10.Warm Air Furnace - Electric 11.Fan Coil Units + DOAS 12.Active Chilled Beams + DOAS 13.Radiant Floors + DOAS 14.VRF + DOAS
Systems 1-10 are ASHRAE Baseline systems that represent much of what has been added to building stock over the last few decades while systems 11-14 are systems that are commonly being installed today to reduce energy use. Here is an example file showing how to assign these systems in Honeybee and interpret the results and here is an example showing how to customize the HVAC system specifications to a wide variety of cases. To run the file, you will need to have OpenStudio installed and you can download and install OpenStudio from here.
In addition to these template systems within Honeybee, the OpenStudio interface includes hundreds of HVAC components to build your own custom HVAC systems. OpenStudio also has a growing number of user-contributed HVAC system templates that have been integrated into a set of scripts called "Measures" that you can apply to your OpenStudio model within the OpenStudio interface. You can find these system templates by searching for them in the building components library. Here is a good tutorial video on how to apply measures to your model within the OpenStudio interface. Honeybee includes a component that runs these measures from Grasshopper (without having to use the OpenStudio interface), which you can see a demo video of here. However, this component is currently in WIP as OpenStudio team is still tweaking the file structure of measures and it is fairly safe to estimate that, by the next stable release of Honeybee, we will have full support of OpenStudio measures within GH.
2 - Phasing Out IDF Exporter
With the connection to OpenStudio now fully established, this release marks the start of a transition away from exporting directly to EnergyPlus and the beginning of Honeybee development that capitalizes on OpenStudio’s development. As such THIS WILL BE THE LAST STABLE RELEASE THAT INCLUDES THE HONEYBEE_RUN ENERGY SIMULATION COMPONENT.
The Export to OpenStudio component currently does everything that the Run Energy Simulation component does and, as such, it is intended that all GH definitions using the Run Energy Simulation component should replace it with the OpenStudio component. You can use the same Read EP Result components to import the results from the OpenStudio component and you can also use the same Energy Sim Par/Generate EP Output components to customize the parameters of the simulation. The only effective difference between the two components is that the OpenStudio component enables the modeling of HVAC and exports the HBZones to an .osm file before converting it to an EnergyPlus .idf.
For the sake of complete clarity, we should state that OpenStudio is simply an interface for EnergyPlus and, as such, the same calculation engine is under the hood of both the Export to OpenStudio component and the Run Energy Simulation component. At present, you should get matching energy simulation results between the Run Energy Simulation component and a run of the same zones with the OpenStudio component (using an ideal air system HVAC).
All of this is to say that you should convert your GH definitions that use the Run Energy Simulation component to have the OpenStudio component and this release is the best time to do it (while the two components are supported equally). Additionally, with this version of Honeybee you will no longer need to install EnergyPlus before using Honeybee and you will only need to install OpenStudio (which includes EnergyPlus in the install).
3 - New Schedule Generation Components
Thanks to the efforts of Antonello Di Nunzio, we now have 2 new components that ease the creation of schedule-generation in Honeybee. The new components make use of the native Grasshopper “Gener Pool” component to give a set of sliders for each hour of the day. Additionally, Antonello has included an annual schedule component that contains a dictionary of all holidays of every nearly every nation (phew!). Finally, this annual schedule component can output schedules in the text format recognized by EnergyPlus, which allows them to be written directly into the IDF instead of a separate CSV file. This will significantly reduce the size of files needed to run simulations and can even reduce the number of components on your canvas that are needed to add custom schedules. For more information, see Antonello’s explanatory images here and Antonello's example file here. You can also see a full example file of how to apply the schedules to energy simulations here.
4 - EnergyPlus Lookup Folder, Re-run OSM/IDF, and Read Result Dictionary
With the new capabilities of OpenStudio, we have also added a number of components to assist with managing all of the files that you get from the simulation. In particular, Abraham Yezioro has added a Lookup EnergyPlus Folder component that functions very similarly to the Lookup Daylight Folder component. This way, you can run an Energy simulation once and explore the results separately. Furthermore, we have added components to Re-Run OpenStudio .osm files or EnergyPlus .idf files within Grasshopper. These components are particularly useful if you edit these .osm or .idf files outside of Honeybee and want to re-run them to analyze their results in Grasshopper. Lastly, a component has been added to parse the .rdd (or Result Data Dictionary) file that EnergyPlus produces, enabling you to see all of the possible outputs that you can request from a given simulation.
5 - Electric Lighting Components Out of WIP
After Sarith Subramaniam’s initial components to model electric lights with Radiance in the last release, we are happy to report that they have been fully tested and are out of WIP. Improvements include support for all types of light fixture geometries and the ability to use the components in a more “Grasshoppery” list-like fashion. See Sarith’s original release post for more information and several example files showing how to use the components can be found here. 1 , 2 , 3 .
6 - Improvements to THERM Components
A number of bug fixes and improvements have been made to the THERM components in order to make their application more flexible and smooth. Special thanks is due to Derin Yilmaz , Mel King , Farnaz , Ben (@benmo1) , and Abraham Yezioro for all of the great feedback in the process of improving these components.
7 - HBObject Transform Components
After some demand for components that can ease the generation of buildings with modular zone types, two components to transform HBObjects with all of their properties have been added to the 00 | Honeybee section. The components allow you to produce copies of zones that are translated or rotated from the original position.
8 - Comfort Maps Supports PET and Integration of CFD Results
Thanks to the addition of the ‘Physiological Equivalent Temperature’ (PET) component by Djordje Spasic in the last stable release, it is now possible to make comfort maps of PET with Honeybee. PET is particularly helpful for evaluating OUTDOOR comfort with detailed wind fields at a high spatial resolution. As such, the new PET recipe has also been optimized for integration with CFD results. The windSpeed_ input can now accept the file path to a .csv file that is organized with 8760 values in each column and a number of columns that correspond to the number of test points. Components to generate this csv from Butterfly CFD results will be coming in later releases. Stay tuned!
As always let us know your comments and suggestions.
Enjoy!Ladybug Analysis Tools Development Team
…
s o alguna de sus partes con la máquina de control numérico de ControlMAD. La finalidad es entrar en contacto con las herramientas disponibles ( control numérico, corte por láser, brazo robótico, scanner 3D..) para construir formas y superficies de geometría compleja a partir del 3D del ordenador.
El curso se acompaña de visitas para conocer de primera mano el trabajo con estas herramientas digitales.Duración: 48 horas:Clases de 3D: Modelado con RHINO (16 horas) + GRASSHOPPER (8 horas) + Vray (4 horas)Proyecto personal tutorado y fabricado en su totalidad o en la parte más significativa con la máquina de control numéricoVisitas programadas:Taller de maquetas. Maquetas de arquitectura para estudios como Zaha Hadid o Moneo. Trabajan con láser y control numérico.Fundición Capa: han realizado esculturas para Dalí, Oteiza o Manolo Valdés entre otros. Trabajan con scanner 3D y brazo robótico.Pasarela sobre el Manzanares, de D. Perrault.…
y anyway ;))
Since 2014 i begun to get back into the construction biz for some dozen main reasons, one of them being the highly increased availability of this kind of software "power", and robotics.
first project ended by 1stQ 2015 was focused on the development of a parametric block for construction. (almost sure the first parametric product designed in Uruguay, and probably one of the few first of this kind globally...)
Far from being a complicated model. In fact the standard model is extremely simple, key thing is that is fully parametric...
dimensions, materials, textures, colors... and so on
second key thing is that the main common component of the blocks (an EPS core) is robotically machined...
the blocks are the base of a construction system (oriented mainly - though not restricted only - to residential buildings) that
- is based on digital models, tendentially to be used in parametric models of buidings
- lab tested to prove to be 1.5 times as compression resistant than traditional bricks and blocks. (autoportability up to two stories buildings)
- has recently proved (due to size) to be 300% more efficient than the classic and 200% more efficient than steel frame in (our country official figures)
check it out here
--
https://drive.google.com/file/d/0B1TRxxgF_sEnQnZrTkZGbUx3cmM/view
--
- and it's aimed to be mass produced and handled by robots...
this project ended on 1H 2016
and i filed 4 patents in the process.
3 of them of mechanical devices designed as extensions for a cnc machine i own
and the fourth (
the patent related specifically with the blocks ) included a dozen of innovations (believe me...i have almost 15 yrs in the biz, and are coool stuff...)
along the project I've been working with inventor, even knowing in advance it will lack the kind of features I wanted to program many things... (lisp, VB, etc.... all same species of -prehistoric - animals) to leverage the tool to the sky - and far beyond... -
but was an alternative valid by that time because it allows the implementation of some form of parametric models, had a local representative and some supposedly skilled guys in the neibourhood....
but life is hard... and none of the latter two rendered me any significant help
so I had to take the tour myself...
- mind i never regret to do things that others cant -
and finish what i start
this one was a great project for many figures... and ended with more results than the ones commited to accomplish...
... some more history here ....
then because of a customer who brought a ZHA project ! to quote..., I crossed with rhino, and then met GH again to notice to my great joy and pleasure, in what kind of animal it had developed...
since money talks I'm investing hard on getting up to the expectations, and beyond as i usually do...
and thats how we met..
2017-2018 it's the time frame to build two robots. first one is a prototype to handle the k-nano blocks in the production process, delivery AND at the construction site ( a "smart crane" we nicknamed...)
the other one is the first prototype of robot to assist in the fabrication (smart blocker we called it to be creative ! ;))
then by 2018-2019 i'll be making a "kinda contour crafter" machine to complete the pie :) (you'll be interested on this..)
i guess you already know what all this has to do with GH...
i already have all the components i can imagine to do almost all i ever wanted to do in relation to this set of projects
but in almost a single tool !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i can design, animate, render, optimize, simulate and even robotic simulate..
so, i have to ask...
is there a chance you might be interested in helping us in some projects we are starting on march and june 2017 (8 and no more than 18 months of duration respectively) ?
sent you a friend request, for the case you might be interested to continue by e-mail...
in any case many thanks for your help and inspiration !
best regards !
long happy marriage, and large figures bank account !
…
hours/day (40 hours) Future University in Egypt (FUE) Department of Continuing Education(DCE) ________________________________________ The aim of this workshop is to teach participants how to create a parametric housing model which can be associated with day lighting and thermal analysis. Moreover, participant will get the opportunity to develop passively design envelope. The workshop is highly interactive giving different examples that develop a strong understanding of Grasshopper Workflow & different passive strategies using the performance simulation tool (DIVA). The participants are divided into groups to study the different orientations and the final outcomes of each group are presented thus concluding the recommendation strategies for each orientation. At the end of the workshop, each participant will receive a Certificate of Attendance from Future University in Egypt. Target Participants: ‐Professional architects. ‐Master and PhD students. ‐ Last year of undergraduate students (ONLY). Prerequisite: -None, however, a basic Grasshopper & Rhinoceros knowledge is preferred. Used Software:(will be provided by the instructor). ‐Rhino 5 SR 3 ‐Grasshopper 0.90066 ‐DIVA Version 2.1.0.3 ________________________________________ Workshop Outline: 1st DAY (Wednesday 29 Jan): 1.Introduction to passive design strategies (efficient envelope) 2.Introduction to parametric design logic 2nd DAY (Thursday 30 Jan) : 1.Developing technical tools based on reverse engineering technology. 2.Examples for parametric facade design 3rd DAY (Saturday 1 Feb): 1.Enforcing the parametric logics with Grasshopper 2.Introducing the performance simulation tool (DIVA) 4th DAY (Sunday 2 Feb): 1.Facade design using grasshopper ‐Studio work. 2.Associative techniques – Day lighting and thermal simulation 5th DAY (Monday 3 Feb): 1.Final optimization and final results 2.Group work presentation ________________________________________ Participants are required to bring their own laptops. To register: 1.Fill in the application form found in this link: https://docs.google.com/forms/d/18OrcwwDks5-vd0irZITC430bjMVb8I8pdw0i5OefyMg/viewform 2.Kindly pay the workshop fees at FUE DCE Admission or in the Bank account Number of participants is a minimum of 20 and a maximum of 24 ________________________________________ Workshop Trainers: Ayman Wagdy Mohamed Ibrahim Researcher at Sustainable Design research group | AUC Lecturer at Parametric design | AUC M.Sc. Architecture – Architecture and Building Technology| Politecnico Di Milano Haitham Salah Ali Mahmoud Teaching Assistant of Design course | AASTMT Head of design team | YBA Architect Principal and cofounder | Arkan Architect ________________________________________ For any questions or info please do not hesitate to contact us at : Mob. : 01003220017 - 01008551772 Email : Fue_ppd@outlook.com…
Added by ayman wagdy at 12:12pm on January 17, 2014
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…