ifically, in your picture, it looks like you're feeding two different pieces of data into the same Data input (D0) of the Anemone Loop Start component. If you zoom in on the component in Grasshopper, you'll see that you can add and subtract Data inputs via little +/- symbols, so you can have D0, D1, D2, etc. (Note: when you do this, Anemone Loop End will return an error if it doesn't have the same amount of Data inputs as the Loop Start, so be sure to add them there as well.) Attaching your original data to different inputs keeps them nicely separated during the looped Anemone process.
The nature (and usefulness) of Anemone is that it allows you to take data output by some functions and use it as the input for that same set of functions (normally forbidden under usual Grasshopper logic). So let's say that you want to take a sphere(Sphere0) and stack progressively smaller versions of that sphere on top of it. You feed the sphere into [Loop Start] as D0, and right away, it comes out of the [Loop Start] D0 output exactly the same, because nothing has happened to it yet. You take Sphere0 from the D0 output, let's say scale it by .8, and transform it up appropriately so it sits on top of the last sphere. Now you have Sphere1! Feed Sphere1 into the D0 input of [Loop End], and now (if the # of repeats allows) Sphere1 is the D0 output of [Loop Start]. So if it goes again, it'll scale and transform Sphere1, resulting in a smaller Sphere2, and so on and so forth for as long as you want. If you right-click on the [Loop End] component, you'll see some options labelled "Output after the last" and "Record Data". If neither option is checked, then you'll see the loop calculating in real time, and the only thing that will come out of the D0 output for [Loop End] is the smallest sphere. If you check only "Record Data," then D0 will contain all of the spheres made from the loops. If you check only "Output after the last," then you won't see anything output to D0 until it's entirely finished calculating all the loops. If you check both options, then D0 will output all the spheres, but only after it's finished calculating everything.
In my snake pictured here, there is a constant # of scales placed around each loop of the tube, let's say 10. But since the tube has variable circumferences, the size of the scales needs to vary based on the circumference of their loop. Furthermore, since the size of the scales varies, the distance between each loop must also vary so that there aren't unsightly gaps between loops. So you take the length of Loop0 and divide it by 20 (2 times the # of scales, since you only use every other scale to achieve this pattern), and use that as the distance between Loop0 and Loop1. But since Loop1 has a smaller circumference, Loop1 divided by 20 is going to yield a smaller number than the first one, and that's why you need to use Anemone to make a loop to find all of this out.
This might be more granular than you wanted, but I hope that some of it helps.
…
hit Commit.
I'm wondering how hard it would be to have an edit box which shows the
number the user could click inside of then type in a new number, then
hit enter. :)
2) How would I go about using one line from a table and assign each
field to a variable? Then, move a slider or something and use the values
from the next row?
background: I'm recreating elbows, Tees, and other fittings using
paramatric scripts, then baking and exporting them. Here's one source
table, http://www.wardfittings.com/Assets/PDFs/0902CatalogColorOld.pdf
page 5, the uniform elbows.
Current Setup: the attached ghx file. Create a point at 0,5,0 in a blank
document with units set to inches, then assign that point to the top
left 'Center Pnt' in the ghx file.
Current workflow:
a) Modify variables A, B, H, and Nominal Dia to match one line from the
table in the linked PDF file, page 5, table of regular elbows.
b) Select the 'Nodes' and 'Surfaces' with a drag box
c) Click 'Bake'
d) Switch to Rhino window, do the 'sellast' command.
e) Drag baked objects along Y axis so the center point is at 0,0,0
f) Run 'Join'
g) Run 'Cap'
h) set the 'node' points to a layer called 'nodes'
i) set the surface to a layer called 'fit-3d'.
j) select the surfaces and nodes
k) export selected
This elbow that I'm doing only has 12 rows, so doing it the above method
doesn't take THAT long. I'm also going to be doing a couple with larger
tables like the Tee on page 8, and in other spec files. As you can
imagine, entering in EACH value into a slider is a bit tedious.
I'd love to take the pdf table, run it through an OCR program to convert
to excel, modify the headers so the ghx script knows what they are, then
paste it into grasshopper, or save it and have grasshopper read it, and
I be able to move a slider or something to to select one line at a time.
Has anyone done something similar? ie: assigned one row in a table to a
predefined set of variables, each variable coming from one field in the row?
Thanks for taking the time to read this message. :)
I'm making a rhino script to do steps d-k, so that part will be much faster.
-Suthern…
r." I'm sorry to hear that, I take the interface and ease-of-use rather seriously so this sounds like a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative."What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it."[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Visual Programming.I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
Context sensitivity."There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal this time around is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
Sliders."I think they should be optional."They are optional."The “N” should turn into the number if set."What if you assign more than one integer? I think I'd rather see a component with inputs 'N', 'P' and 'X' rather than '5', '8' and '35.7', but I concede that is a personal preference."But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly."Agreed.
Components."Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data."Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
Integration."Why isn't it just live geometry?"This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry."Maybe add more Rhino functionality to GH. GH has no 3D offset."That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
Documentation.Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
2D-ness."I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
Organisation.Agreed. We need to come up with better ways to organise, document, version, share and simplify GH files. GH1 UI is ok for small projects (<100 components) but can't handle more complexity.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
david@mcneel.com…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
e a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative.
I get that. That’s why that 3D shape I’m trying to apply the voronoi to was done in NX. I do wonder where the GUI metaphor GH uses comes from. It reminds me of LabVIEW.
"What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."
Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it.
It’s not the primary components that catalyzed this thought but rather the secondary components. I was toying with a component today (twist from jackalope) that made use of three toggle components. The things they controlled are checkboxes in other apps.
Take a look at this jpg. Ignore differences; I did 'em quickly. GH required 19 components to do what SW did with 4 commands. Note the difference in screen real estate.
As an aside, I really hate SolidWorks (SW). But going forward, I’ll use it as an example because it’s what most people are familiar with.
"[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."
Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.
I agree, and disagree. I believe parametric applies equally to GH AND SW, NX, and so forth, while algorithmic is unique to GH (and GC and Dynamo I think). Thus I understand why you prefer the term. I too tend to not like referring to GH as a parametric modeler for the same reason.
But I think it oversimplifies it to say parametric modelers move the clicks. SW tracks clicks the same way GH does; GH holds that information in geometry components while SW holds it in a feature in the feature tree. In both GH and SW edits to the base geometry will drive a recalculation, but more commonly, it’s an edit to input data, beit equations or just plain numbers, that drive a recalculation.
I understand the difference in these programs. What brought me to GH is that it can create a visual dialog that standard modelers can’t. But as I've grown more comfortable with it I’ve come to realize that the GUI of GH and the GUI of other parametric modelers, while looking completely different, are surprisingly interchangeable. Do not misconstrue that I’m suggesting that GH should replace it’s GUI with SW’s. I’m not. I refrain from suggesting anything specific. I only suggest that you allow yourself to think radically.
This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Given a choice, I'd pick kick-ass algorithmic modeller with no parametrics tacked on.
2. Visual Programming.
I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
I'll admit, this is a bit tough to explain. As I've re-read my own comment, I think it was partly a precursor to the context sensitivity point and touched upon other stated points.
This now touches upon my own ignorance about GH’s target market. Are you moving toward a highly specialized tool for programmers and/or mathematicians, or is the intent to create a tool that most designers can master? If it’s the former, rock on. You’re doing great. If it’s the latter, I’m one of the more technically sophisticated designers I know and I’m lost most of the time when using GH.
GH allows the same freedom as a command line editor. You can do whatever you like, and it’ll work or not. And you won’t know why it works or doesn't until you start becoming a bit of an expert and can actually decipher the gibberish in a panel component. I often feel GH has the ease of use of DOS with a badass video card in front.
Please indulge my bit of storytelling. Early 3D modelers, CATIA, Unigraphics, and Pro-Engineer, were unbelievably difficult to use. Yet no one ever complained. The pain of entry was immense. But once you made it past the pain threshold, the salary you could command was very well worth it. And the fewer the people who knew how to use it, the more money you could demand. So in a sense, their lack of usability was a desirable feature among those who’d figured it out.
Then SolidWorks came along. It could only do a fraction of what the others did, but it was a fraction of the cost, it did most of what you needed, and anyone could figure it out. There was even a manual on how to use it. (Craziness!) Within a few short years, the big three all had to change their names (V5, NX, and Wildfire (now Creo)) and change the way they do things. All are now significantly easier to use.
I can tell that the amount of development time that’s gone into GH is immense and I believe the functionality is genius. I also believe it’s ease of use could be greatly improved.
Having re-read my original comments, I think it sounded a bit snotty. For that I apologize.
3. Context sensitivity.
"There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."
Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?
I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal [...] is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.
You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
You bring up both interesting points and limits to my understanding of coding. I’ve reached the point in my learning of GH where I’m just getting into figuring out the sets tab (and so far I’m not doing too well). I often find myself wondering “Is all of this manual conditioning of the data really necessary? Doesn’t most software perform this kind of stuff invisibly?” I’d love to be right and see it go away, but I could easily be wrong. I’ve been wrong before.
5. Components.
"Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."
I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data.
I kinda like this. It’s a continuation of what you’re currently doing with things like the panel component.
"Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"
It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
6. Integration.
"Why isn't it just live geometry?"
This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry.
"Maybe add more Rhino functionality to GH. GH has no 3D offset."
That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).
On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
You work for McNeel yet you seem to speak of them as a separate entity. Is this to say that there are technical reasons GH can only access things through the Rhino SDK? I’d think you would have complete access to all Rhino API’s. I hope it’s not a fiefdom issue, but it happens.
7. Documentation.
Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.
Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
It begs the question that I have to ask. When is GH1.0 scheduled to launch? And if you need another person to proofread the current draft of new primer.
patrick@girgen.com
I can’t believe wikipedia has an entry for feature creep. And I can’t believe you included it. It made me giggle. Thanks.
8. 2D-ness.
"I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"
I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
I believe it’s been helpful for me to have figured this out. I recently completed a GH course at a local Community College and have done a bunch of online tutorials. The first real project I decided to tackle has turned out to be one of the more difficult things to try. It’s the source of the questions I posted. (Thanks for pointing out that they were posted in the wrong spot. I re-posted to the discussions board.)
I just can't seem to figure out how to turn the voronoi into legitimate geometry. I've seen this exact question posted a few times, but it’s never been successfully answered. What I'm showing here is far more angular than I’m hoping for. The mesh is too fine for weaverbird to have much of an effect. And I haven't cracked re-meshing. Btw, in product design, meshes are to be avoided like the plague. Embracing them remains difficult.
As for offsetsurf, in Rhino, if you do an offsetsurf to a solid body, it executes it on all sides creating another neatly trimmed body thats either larger or smaller than the original. This is how every other app I know of works. GH’s offsetsurf creates a bunch of unjoined faces spaced away from the original brep. A common technique for 3D voronois (Yes, I hit the voronoi overuse easter egg) is to find the center of each cell and scale them by this center. If you think about it, this creates a different distance from the face of the scaled cell to the face of the original cell for every face. As I've mentioned, this project is giving me serious headaches.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
Thank you for taking the time to reply David. Often we feel that posting such things is send it into the empty ether. I’m very glad that this was not the case.
And thank you for all of the work you've put into GH. If you found any of my input overly harsh or ill-mannered, I apologise. It was not my intent. I'm generally not the ranting sort. If I hadn't intended to provide possibly useful input, I wouldn't have written.
Cheers
Patrick Girgen
Ps. Any pointers on how to get a bit further on the above project would be greatly appreciated.
…
the daylighting and energy sim with Nat Vent create many complex questions.
Daylighting :
1. Adding shading to energy AND daylight simulation: Can I add HBconext to Honeybee_run daylight simulation HBobject input ?
Looking at the results it seems like daylight simulation doesn't recognize HBcontext, or maybe the difference is minute. Am I doing this correctly? Is there a possible error due to redundancy ? (meaning I am introducing the HBcontext twice, one time to the Honeybee_run daylight simulation AND energy simulation)
2. One of the component, Honeybee_Read annual result 1 keeps failing and says that ''1. Solution exception:index out of range: 0." I read here input needs to be internalize data but maybe there is a better solution?
Shading :
I want to study life cycle perspective of
A) Optimal ratio of fixed vs dynamic louvers for economic implementation,
B) Assess whether it makes more sense for the dynamic louvers to functions as light shelvs or the fixed ones for economic reasons
C) Simulate dynamic/fixed hybrid louver system schedule, and show it in a manner similiar to lighting schedule.
For this I would need to simulate the effect of dynamic and-or fixed shades in reducing annual lighting cost while reducing cumulative heat gain.
3_How to introduce Dynamic shading schedule for custom shades? Is this done with EPtranschedule input of the HB EP context component? I would like to keep the louvers branched so that it is possible to assign different modes i.e. fixed or dynamic
Light Shelf:
4_Is the lighting schedule effected by light shelves introduced in the annual daylighting simulation?
5_Does energy simulation take account of additional heat gain from light shelvs ?
6_When I use Honeybee_createHBSrfs with Honeybee_radiance Mirror material, it crashes rhino. The geometry input is not branched. Any report similar crashes?
Nat Vent:
I want to design to combine passivhaus principles with Natural ventilation.
My goal to simulate the energy performance of passivhaus house like building system with Bouyancy driven Nat Vent design which maximizing the percentage of the year Nat Vent takes care of ventilation and cooling, and in cloud days heat exchanger with fans kicks in.
using a trombe roof that heats air and using a vertical shaft that recirculate air, want to minimize the use of fans, Ducts, Heating etc. and I want to use the HB Set_Air flow component to evaluate such system if I can.
while I have heard that bouncy driven system may only be reserved for tall buildings, I still would to simulate the effectiveness for mid rizes and podium- types. I am skeptical whether there will be enough pressure difference for effective ventilation of 1.5ms so I would like to test.
How to set up models to evaluate bouyancy driven ventilation :
7 About HB Set_Air Flow, with Natural ventilation, If I use the HB Set_air the honeyzone output is null. I am not sure why, no error messages.
8_ When using the HB Set Air component to include Nat Vent with bouyancy,
does the result of reduced temperature to take effect into the cooling/equipment/ventilation schedule of the Honeybee_set Energy plus zone schedules?
Additionally I want to incorporate Nat vent analysis with the light shelf, since both would effect indoor temperature.
A wish list: as if it were all this has been not.
9_I wish there is something like a deconstruct honeybee zone component that basically breaks down all the options (mechanically ventilated or not) that is associated with the honeybee zones so that it is easy to document all the properties in text.…