phere with the maximum number of triangles but not much than a defined threshold.
I scaled that mesh just to fit Rhino grid, but it is not mandatory. What is useful, is to scale not uniformly the mesh (Scale NU). It could be done after cellular modifier applied or before or before and after. The 3 options are possible in the script. If you don’t need them just put 1 in scale sliders.
Ellipsoid mesh is the populated with points, I put 2 independents populations to randomize a bit further. For each vertices of the mesh the closest distance from the populated points is calculated.
Here is an illustration in color of this distance.
This distance is then used to calculate a bump. If domain for bump is beginning with negatives values to 0, it carves the mesh. Instead it bumps/inflates it.
Some images to illustrate the difference with populating 100 points with one or two populations.
Here some images to illustrate the application of scale before carving or after.
Next phase apply noise. At the moment I don't find it good.…
d simulate the bending process of a flat stell sheet in order to get the same shape. This can be really interesting so we can evaluate the material beheaviour, the deformation on the cross section a
nd explore big deformations in mecanics analysis of materials.
I am not a mecanical engineer nor a civil engineer, I´m an Architect and my interest is the construcction method and extracting the necesary information to consider fabricating the project.
I´m having conceptual challengings on the methodology for this simulation, so I will post a small overview of what I`ve done.
1.- Understanding the Geometry.
This is a sclupture by the Venezuelan/Hungarian/German artist Zoltan Kunckel (KuZo).
The shape is achieved bending a pre water cut square sheet of stainless steel. After bended manually, the different lashes are pulled on the opposite direction. New curvatures are produced after all is deployed.
2.- Reproducing the Shape digitally.
Using Karamba I built a definition to reproduce the produced by physical stress. This model served to find deformations that occur when a set of loads are applied to a mesh. Following this process will allow us to find a coherent and more natural cross section so then we could re-shape simulating the bending process of a piece of ductile material.
3.- Discretizing curve
Reducing the model to its simplest element is a key aspect of finite nonlinear analysis. Once our shape is already defined we can divide its principal characteristic of its principal given curve.
At this point I have already found the desired curve.
I Think the better strategy to simulate bending the steel sheet into this shape, is rationalize the curve and divide it finding the tangents one of the curve that compose this sort of parabola. bur i don`t know how to parametrize that in GH.
Please. If someone have a better Idea about this process I`ll glad to read sugestions.
Tomás Mena
…
rrect, the heat balance of a zone is always 0 = Qcool/heat + Qinf + Qvent + Qtrans + Qinternalgains + Qsol. These parameters also correspond with the readEPresult element. However, if i sum up these values there is a slight deviation.
The deviation is greater during daytimes and in winter, suggesting it has something to do with the heating values.
Attached you'll find an image of the energy plus outputs that I use and the resulting -.CSV file that I constructed. In this you'll see that the balance does not add up.
Am i missing some energy flows?
Thanks for the help.
Hour[H]
Qbal{kWh]
Qint[kWh]
Qsol[kWh]
Qinf[kWh]
Qvent[kWh]
Qtrans[kWh]
Tair[°C]
Tdrybulb[°C]
DIFFERENCE
1
3,039357
0,137702
0
-0,253218
-0,321929
-2,000028
20
5,1
0,601884
2
3,107099
0,125462
0
-0,247457
-0,315484
-1,881276
20
4,6
0,788344
3
3,181073
0,119342
0
-0,261765
-0,334485
-2,473788
20
4,3
0,230377
…
ndard length elements without any cutting, and using only simple connections, such as cable ties or scaffold swivel couplers.
To summarize the approach I present here:
Design an initial shape
Remesh this form so that the edges are all roughly the length of the tubes we will use to build the structure
Rotate and extend the edges of this mesh to create the crossings
Apply a relaxation to optimize the positions of the tubes for tangency
demo_reciprocal_structures.gh
Initial form
In this example I show how to apply this system to a simple sphere. You can replace this with any arbitrary shape. It can be open or closed, and have any topology.
Remeshing
The new ReMesher component takes an input mesh, and a target edge length, and iteratively flips/splits/collapses edges in order to achieve a triangulated mesh of roughly equal edge lengths.
Press the Reset button to initialize, then hold down the F5 key on your keyboard to run several iterations until it has stabilized. (F5 just recomputes the solution, and this can be a quick alternative to using a timer)
Once the remeshing is complete, bake the result into Rhino and reference it into the next part of the definition (I recommend doing this rather than connecting it directly, so that you don't accidentally alter the mesh and recompute everything downstream later).
Alternatively you can create your mesh manually, or using other techniques.
Rotate and Extend
We generate the crossings using an approach similar to that described by Tomohiro Tachi for tensegrity structures here:
http://www.tsg.ne.jp/TT/cg/FreeformTensegrityTachiAAG2012.pdf
Using the 'Reciprocal' component found in the Kangaroo mesh tab, each edge is rotated about an axis through its midpoint and normal to the surface, then extended slightly so that they cross over.
By changing the angle you can change whether the fans are triangular or hexagonal, and clockwise or counter-clockwise.
Choose values for the angle and scaling so that the lines extend beyond where they cross, but not so far that they clash with the other edges.
Note that each rod has 4 crossings with its surrounding rods.
There are multiple possibilities for the over/under pattern at each 'fan', and which one is used affects the curvature:
A nice effect of creating the pre-optimization geometry by rotating and extending mesh edges in this way is that the correct over/under pattern for each fan gets generated automatically.
Optimization for tangency
We now have an approximate reciprocal structure, where the lines are the centrelines of our rods, but the distances between them where they cross vary, so we would not actually be able to easily connect the rods in this configuration.
To attach the rods to form a structure, we want them to be tangent to one another. A pair of cylinders is tangent if the shortest line between their centrelines is equal to the sum of their radii:
Achieving tangency between all crossed rods in the structure is a tricky problem - if we move any one pair of rods to be tangent, we usually break the tangency between other pairs, and because there are many closed loops, we cannot simply start with one and solve them in order.
Therefore we use a dynamic relaxation approach, where forces are used to solve all the tangency constraints simultaneously, and over a number of iterations it converges to a solution where they are all met. The latest Kangaroo includes a line-line force, which can be used to pull and push pairs of lines so that they are a certain distance apart. Each rod is treated as a rigid body, so forces applied along its length will cause it to move and rotate.
The reciprocal component uses Plankton to find the indices of which lines in the list cross, which are then fed into the force for Kangaroo. We also use springs to keep each line the same length.
If the input is good, when we run the relaxation (by double clicking Kangaroo and pressing play), the rods should move only a little. We can see whether tangency has been achieved by looking at the shortest distance between the centerlines of the crossing rods. When this is twice the rod radius, they are tangent. Wait for it to solve to the desired degree of accuracy (there's no need to wait for 1000ths of a millimeter), and then press pause on the Kangaroo controller and bake the result.
The radius you choose for the pipes, curvature of the form and length of the edges all affect the result, and at this stage you may need to tweak these input values to get a final result you are happy with. If you find the rods are not reaching a stable solution but are sliding completely off each other, you might want to try adding weak AnchorSprings to the endpoints of the lines, to keep them from drifting too far from their original positions.
For previewing the geometry during relaxation I have used the handy Mesh Pipe component from Mateusz Zwierzycki, as it is much faster than using actual surface pipes.
To actually build this, you then need to extract the distances along each rod at which the crossings occur, and whether it crosses over or under, mark the rods accordingly, and assemble (If there is interest I will also clean up and post the definition for extracting this information). While this technique doesn't require much equipment, it does need good coordination and numbering!
There is also a ReciprocalStructure user object component that can be found in the Kangaroo utilities tab, which attempts to apply steps 3 and 4 automatically. However, by using the full definition you have more control and possibility to troubleshoot if any part isn't working.
The approach described here was first tested and refined at the 2013 Salerno Structural Geometry workshop, lead by Gennaro Senatore and myself, where we built a small pavilion using this technique with PVC tubes and cable ties. Big thanks to all the participants!
Finally - this is all very experimental work, and there are still many unanswered questions, and a lot of scope for further development of such structures. I think in particular - which of the relative degrees of freedom between pairs of rods are constrained by the connection (sliding along their length, bending, and twisting) and how this affects the structural behaviour would be interesting to examine further.
Steps 3 and 4 of the approach presented above would also work with quad meshes, which would have different stability characteristics.
There is also the issue of deformation of the rods - as the procedure described here solves only the geometric question of how to make perfectly rigid straight cylinders tangent. The approach could potentially be extended to adjust for, or make use of the flexibility of the rods.
I hope this is useful to somebody. Please let me know if you do have a go at building something using this.
Any further discussion on these topics is welcome!
Further reading on reciprocal structures:
http://vbn.aau.dk/files/65339229/Three_dimensional_Reciprocal_Structures_Morphology_Concepts_Generative_Rules.pdf
http://www3.ntu.edu.sg/home/cwfu/papers/recipframe/
http://albertopugnale.wordpress.com/2013/04/05/form-finding-of-reciprocal-structures-with-grasshopper-and-galapagos/
…
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
ion of both Ladybug and Honeybee. Notable among the new components are 51 new Honeybee components for setting up and running energy simulations and 15 new Ladybug components for running detailed comfort analyses. We are also happy to announce the start of comprehensive tutorial series on how to use the components and the first one on getting started with Ladybug can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O
A second one on how to use the new Ladybug comfort components can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v
Here is a short list highlighting some of the capabilities of this current Honeybee release:
1) Run EnergyPlus and OpenStudio Simulations - A couple of components to export your HBZones into IDF or OSM files and run energy simulations right from the grasshopper window! Also included are several components for adjusting the parameters of the simulations and requesting a wide range of possible outputs.
2) Assign EnergyPlus Constructions - A set of components that allow you to assign constructions from the OpenStudio library to your Honeybee objects. This also includes components for searching through the OpenStudio construction/material library and components to create your own constructions and materials.
3) Assign EnergyPlus Schedules and Loads - A set of components for assigning schedules and Loads from the Openstudio library to your Honeybee zones. This includes the ability to auto-assign these based on your program or to tweak individual values. You can even create your own schedules from a stream of 8760 values with the new “Create CSV Schedule” component. Lastly, there is a component for converting any E+ schedule to 8760 values, which you can then visualize with the standard Ladybug components
4) Assign HVAC Systems - A set of components for assigning some basic ASHRAE HVAC systems that can be run with the Export to OpenStudio component. You can even adjust the parameters of these systems right in Grasshopper.
Note: The ASHRAE systems are only available for OpenStudio and can’t be used with Honeybee’s EnergyPlus component. Also, only ideal air, VAV and PTHP systems are currently available but more will be on their way soon!
5) Import And Visualize EnergyPlus Results - A set of components to import numerical EnergyPlus simulation results back into grasshopper such that they can be visualized with any of the standard Ladybug components (ie. the 3D chart or Psychrometric chart). Importers are made for zone-level results as well as surface results and surfaces results can be easily separated based on surface type. This also means that E+ results can be analyzed with the new Ladybug comfort calculator components and used in shade or natural ventilation studies. Lastly, there are a set of components for coloring zone/surface geometry with EnergyPlus results and for coloring the shades around zones with shade desirability.
6) Increased Radiance and Daysim Capabilities - Several updates have also been made to the existing Radiance and Daysim components including parallel Radiance Image-based analysis.
7) Visualize HBObject Attributes - A few components have been added to assist with setting up honeybee objects and ensuing the the correct properties have been assigned. These include components to separate surfaces based on boundary condition and components to label surfaces and zones with virtually any of their EnergyPlus or Radiance attributes.
8) WIP Grizzly Bear gbxml Exporter - Lastly, the release includes an WIP version of the Grizzly Bear gbXML exporter, which will continue to be developed over the next few months.
And here’s a list of the new Ladybug capabilities:
1) Comfort Models - Three comfort models that have been translated to python for your use in GH: PMV, Adaptive, and Outdoor (UTCI). Each of these models has a “Comfort Calculator” component for which you can input parameters like temperature and wind speed to get out comfort metrics. These can be used in conjunction with EPW data or EnergyPlus results to calculate comfort for every hour of the year.
2) Ladybug Psychrometric Chart - A new interactive psychrometric chart that was made possible thanks to the releasing of the Berkely Center for the Built Environment Comfort Tool Code (https://github.com/CenterForTheBuiltEnvironment/comfort-tool). The new psychrometric chart allows you to move the comfort polygon around based on PMV comfort metrics, plot EPW or EnergyPlus results on the psych chart, and see how many hours are made comfortable in each case. The component also allows you to plot polygons representing passive building strategies (like internal heat gain or evaporative cooling), which will adjust dynamically with the comfort polygon and are based on the strategies included in Climate Consultant.
3) Solar Adjusted MRT and Outdoor Shade Evaluator - A component has been added to allow you to account for shortwave solar radiation in comfort studies by adjusting Mean Radiant Temperature. This adjusted MRT can then be factored into outdoor comfort studies and used with an new Ladybug Comfort Shade Benefit Evaluator to design outdoor shades and awnings.
4) Wind Speed - Two new components for visualizing wind profile curves and calculating wind speed at particular heights. These allow users to translate EPW wind speed from the meteorological station to the terrain type and height above ground for their site. They will also help inform the CFD simulations that will be coming in later releases.
5) Sky Color Visualizer - A component has been added that allows you to visualize a clear sky for any hour of the year in order to get a sense of the sky qualities and understand light conditions in periods before or after sunset.
Ready to Start?
Here is what you will need to do:
Download Honeybee and Ladybug from the same link here. Make sure that you remove any old version of Ladybug and Honeybee if you have one, as mentioned on the Ladybug group page.
You will also need to install RADIANCE, DAYSIM and ENERGYPLUS on your system. We already sent a video about how to get RADIANCE and Daysim installed (link). You can download EnergyPlus 8.1 for Windows from the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/?utm_source=EnergyPlus&utm_medium=redirect&utm_campaign=EnergyPlus%2Bredirect%2B1).
“EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings.”
“OpenStudio is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance.”
Make sure that you install ENERGYPLUS in a folder with no spaces in the file path (e.g. “C:\Program Files” has a space between “Program” and “Files”). A good option for each is C:\EnergyPlusV8-1-0, which is usually the default locations when you run the downloaded installer.
New Example Files!
We have put together a large number of new updated example files and you should use these to get yourself started. You can download them from the link on the group page.
New Developers:
Since the last release, we have had several new members join the Ladybug + Honeybee developer team:
Chien Si Harriman - Chien Si has contributed a large amount of code and new components in the OpenStudio workflow including components to add ASHRAE HVAC systems into your energy models and adjust their parameters. He is also the author of the Grizzly Bear gbxml exporter and will be continuing work on this in the following months.
Trygve Wastvedt - Trygve has contributed a core set of functions that were used to make the new Ladybug Colored Sky Visualizer and have also helped sync the Ladybug Sunpath to give sun positions for the current year of 2014
Abraham Yezioro - Abraham has contributed an awesome new bioclimatic chart for comfort analyses, which, despite its presence in the WIP tab, is nearly complete!
Djordje Spasic - Djordje has contributed a number of core functions that were used to make the new Ladybug Wind Speed Calculator and Wind Profile Visualizer components and will be assisting with workflows to process CFD results in the future. He also has some more outdoor comfort metrics in the works.
Andrew Heumann - Andrew contributed an endlessly useful list item selector, which can adjust based on the input list, and has multiple applications throughout Ladybug and Honeybee. One of the best is for selecting zone-level programs after selecting an overall building program.
Alex Jacobson - Alex also assisted with the coding of the wind speed components.
And, as always, a special thanks goes to all of our awesome users who tested the new components through their several iterations. Special thanks goes to Daniel, Michal, Francisco, and Agus for their continuous support. Thanks again for all the support, great suggestions and comments. We really cannot thank you enough.
Enjoy!,
Ladybug + Honeybee Development Team
PS: If you want to be updated about the news about Ladybug and Honeybee like Ladybug’s Facebook page (https://www.facebook.com/LadyBugforGrasshopper) or follow ladybug’s twitter account (@ladybug_tool).
…
you will need to deal with all of the curves that intersect the boundry curve, but you will also need to sort through all of the circles inside because the planar surface algorithm won't sort those out for you. The good news is that because you are using circles and linear segments, you can use "pure" geometry equations for some of these intersections instead of relying on NURBS curve "physical" intersections. In the end this means faster and also "more" reliable intersections (especially with the circles).
Method 1: Dealing with everything as a phyisical curve...
First things first, i guess the "easiest" way to do this would be to translate everything into an OnCurve derived class, and then use the IntersectCurve method to find the intersections. You will need to sort through the resulting ArrayON_XEVENT to find the parameter of each intersection. There should always be 2 intersections, and you're always going to be interested in the intersections of the circle not the boundry curve.
To trim the curves, you'll want to use the Split method along with one of the parameters on the curve that you retrieved from the intersection. The only issue is that the split method gets a bit complicated when using it on closed curves. You could either split at both parameters that you retrieved from the intersection results, then sort through the 3 resulting curves to join the two that you need. Or move the start point of the circle to where one of the intersection points happened, translate the other intersection point to the new curve parameter (ie the parameter will be a different number, but it will be physically in the same place), then split with that new curve parameter.
Method 2: Try and work with the circles as circles
Because you can tell if a circle intersects something by seing if the distance to its center point is less than the radius of the circle, this might be a quicker way to go. If you have the boundry curve as an OnCurve derived class, then you can use the GetClosestPoint method and use all of the center points for each of the circles. The nice thing is that after the 3Dpoint in, and the parameter on the curve that you'll get out, you have the option of supplying a maximum distance. If you do supply that value (use the radius of the circles), then you'll only get a result when the distance is less than or equal to that value. In which case there will be an intersection.
To go even further, you can treat the segments of the boundry curve each as a line, and find the closest point/distance to that. That's maybe more complex than your looking to go, but speed wise, it might just be worth it. Take a look at the following link for more code/discussion on the subject.
http://www.codeguru.com/forum/showthread.php?t=194400
Part 2: Circle-Circle intersections
If you're going to want to make a planar surface out of those circes and the boundry curve, then you'll need to resolve all of the intersections that you have there. Again this is probably something that would be best taken care of by doing some distance tests between the center points of all the circles and seeing if that distance is less than the radius your using. After you've found circles that intersect, you can be try intersecting the curves using the same method mentioned above, or even manually generating the intersection with some trig, but ultimately creating a final result might take a bit of work, especially where you have more than two circles intersecting. The "lazy" way out of this is what's used by the curve boolean command, which is to take each individual curve, make a planar surface from that individual curve, and use standard Rhino booleans to get the result. Luckily you're looking for the union of all those areas, which will be the easiest to create and deal with. After you create the planar surface of each one (RhUtil.RhinoMakePlanarBreps), you can use either RhUtil.RhinoBooleanUnion or the more specialized version, RhUtil.RhPlanarRegionUnion. Note that RhPlanarRegionUnion only takes 2 breps at a time and needs the plane of the intersection.…
ake a network of lines (i.e. a graph) and make a Plankton Mesh, from which you can use Cytoskeleton to make a solid mesh (and then smooth it with Weaverbird).
Works with ngons (polygons with 3 or more sides). Other examples I found only worked with tris and quads.
Works on open or closed surfaces
While these examples start with a surface, you could start with a network of lines and make a patch surface
This is meant for 2D networks/surfaces. I haven't attempted filling a 3D volume. My guess is this wouldn't work as it would require a non-manifold mesh that Plankton wouldn't handle.
Note similar results could be achieved with the following:
TSplines
MeshDual (dual of a tri mesh, not as much freedom/control)
Working backwards, here is the GhPython script from Will Pearson that builds a Plankton Mesh from vertices and faces. The vertices are a list of 3D coordinates, the faces are a tree a lists, with each list containing the indices of vertices that form a closed loop. From Will, "Plankton only handles manifold meshes, i.e. meshes which have a front and a back. This orientation is determined by the "right-hand rule" i.e. if the vertices of a face are ordered counter-clockwise then the face normal will be out of the page/screen."
# V: list of Point3d # F: tree of int
import Grasshopper appdata = Grasshopper.Folders.DefaultAssemblyFolder
import clr clr.AddReferenceToFileAndPath(appdata + "Plankton.dll")
import Plankton
pmesh = Plankton.PlanktonMesh()
for pt in V: pmesh.Vertices.Add(pt.X, pt.Y, pt.Z)
for face in F.Branches: face = list(face)[:-1] pmesh.Faces.AddFace(face)
These vertices and faces are precisely the output from Starling. Starling takes in a list of Polylines which form the (properly oriented) face loops.
The polyline face loops can be generated...
Directly from Panels on a surface using LunchBox
Using any network of lines/curves on a surface (curves will need to be converted to polylines before Starling)
The latter was achieved using the Surface Split command, then converting the face edges (converted to curves) into polyline loops to represent faces.
…
). It deals with the potential possibility to port GH into AEC fields (real-life AEC fields, nothing to do with academic thinking). The bad news are that the smart AEC sector is occupied solely by Bentley/GenComp – expect soon Revit/Dynamo as well (not to mention CATIA). The good news are that there’s millions of designers/engineers/industrial designers out there who could be interested for a 3rd alternative.
Intro: Well, in the old days (when men had mustache and muttonchops) AEC design performed in a nice top-to-bottom sequence (kinda like a vector) : the Big Man (aka The Brain) did some sketches (with crayons) and the rest (known as the “others”) struggled to make The Idea a reality. Today things are different, mind. Or they should be different. Or may be different. Or whatever. The big easy:For a zillion o reasons (AEC matures, PLM, cost, outsourcing, sustainable engineering…add several more) this vector like process of the past is like a Brown motion these days: Right down the moment that you (or your team) “sketch” The Big Idea … another team design simultaneously (i.e. in parallel) the components (parts) that compose the whole. This is the so called bottom-to-top design mentality. So the whole and the parts meet in some "middle point" instead the later being dictated by the former. In quite a few occasions parts dictate the whole (cost, cost and cost being the main reasons). The more a design is contemporary the more this bottom-to-top thing plays a critical role. Ignore it and have a very big time (sooner or later).The bad news:If you accept the above…well GH – at present phase - is not ready for contemporary AEC work. At.All.3 Main reasons for that:1.You can’t use parametric parts (i.e. nested blocks to speak Rhino language) into a given definition (in this case attached : truss nodes, connection flanges, mount plates, cable tensioners, planar glazing components, roof skin components…etc etc). This is obviously a Rhino domain.2.You can’t bake a given solution in such a way that the Rhino file is structured (i.e. assemblies of nested blocks). Or you can do it theoretically writing some VB/C code – but the core of the matter is that corresponding components are MIA. That means that you can’t export anything useful actually into established AEC oriented apps and/or established MCAD apps (for doing/calculating the parts for real-life production).3.The GH process can’t being interrupted. Imagine defining, say, a building “envelope” in GH and then …er…use Evolute tools in order to optimize things (say quad planarization and the likes). Then …continue in GH for more detailed work. Then design the parts as in 1 above. Then back to Evolute. Then back to GH.So…if anyone is interested I would be glad to start the mother of all debates and/or some kind of crusade (GH for President, that is).PS: This definition is a WIP thing – more refined stuff to follow (in particular a complex canopy tubes pre-stress system).
PS: Tree8 components are used sporadically.
PS: Use Saved Views
May the Dark Force be with us.Best, Peter …