her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
ne – power of the many è un corso advanced level che studia la produzione di effetti complessi a partire dalla modellazione di comportamenti semplici su un insieme strutturato con un numero alto di elementi. Attraverso un approccio generico e scaleless sarà possibile affrontare la tematica generale su più fronti e in una molteplicità di declinazioni possibili. Il corso è rivolto a chi,indipendentemente dal proprio background (urbanistica, architettura, ingegneria, design, arte o altro) già possiede una esperienza di base con Rhinoceros e Grasshopper, e desidera sviluppare aspetti di gestione avanzata del flusso di articolato di informazioni attraverso una strategia guidata basata su esempi pratici e sull’implementazione di un progetto personale sul tema generale del “field behaviour”. Sarà trattato anche l’utilizzo di alcuni plug-ins quali gHowl e WeaverBird. Il numero dei partecipanti è fissato a un massimo di 20 per offrire un tutoraggio proficuo ed una effettiva esperienza di learning ad ogni iscritto.
[.] Temi:
teoria
. complessità, emergence, effetti di campo (field behaviour), sensibilità, efficienza multiperformance
tecnica
. dati:gestione e manipolazione avanzata del data tree, streaming e visualizzazione; transizione, blending e modulazione delle geometrie; generazione e controllo multiperformance di popolazioni di componenti; attrattori, drivers e tecniche di modulazione avanzate; uso delle mesh con WeaverBird; ottimizzazione con Galapagos
[.] Dettagli :
Tutors: Alessio Erioli + Andrea Graziano – Co-de-iT
Si richiede esperienza di base nella modellazione in Rhino (equivalente a Rhino training Level 1, il Level 2 è gradito – la documentazione per il training è disponibile gratuitamente all’indirizzo: http://download.rhino3d.com/download.asp?id=Rhino4Training&language=it) e nell’uso di Grasshopper (la suddivisione di una superficie NURBS in componenti tramite isotrim è data come base assodata)
. luogo:
IreCoop – via Vasco De Gama 27 _ Firenze
. durata:
25-27 febbraio 2010 – 3 giornate consecutive _ orario 9:00 – 18:00
. costo:
professionisti – 450.00 € studenti – 280.00 €
. note:
scadenza iscrizioni: 20 febbraio 2010 il corso sarà attivato con un numero minimo di 15 iscritti al termine sarà rilasciato un attestato di frequenza gli iscritti dovrano venire muniti dei propri laptop con software installato. una versione free per 30 giorni è disponibile sul sito www.rhino3d.com
. contatti:
iscrizioni + info alloggi: www.irecooptoscana.it (Cosa offriamo > formazione > altri corsi)
info sul corso: info@co-de-it.com…
ther math and logic. i can usually conceptualise what i want to do and cobble some semi working thing together but don't know which components to use and how to patch it. so i'm super happy to have someone who knows what he's doing to find this interesting.
and i'm glad you mention the fanned frets again, there is one input parameter that's still missing for the multiscale frets to be fully parametric, it's the angle of the nut or which fret should be straight. it depends a bit on personal preferences and playing posture what is more comfortable. so being able to adjust this easily would be cool. again i have no idea how the maths for that work or if you can just rotate each fret the same amount around it's middle point. The input either as fret number (for the straight fret) or as a simple slider from bridge to nut should do as input setting.
Here are the two extremes and the middle ground:
i've been thinkin today while analysing your patches and cleaning up my mess what exactly the monster should do.
Here are the input parameters needed, i think it's the complete list
scale length low E string
scale length high e string
fret angle/straight fret
string width at nut
string width at bridge
number of frets
fretboard overhang at nut (distance from string to fretboard bounds)
fretboard overhang at last fret
string gauges
string tensions
fretboard radius at nut (for compound radius fretboard radius at bridge is calculated with the stewmac formula)
fretwire crown width
fretwire crown height
action height at nut (distance between bottom of string and fretwire crown top)
action height at last fret
pickup 1 neck position
pickup 2 middle position
pickup 3 bridge position
nut width
the pickup positions should be used to draw circles for the magnet poles on each string so they are perfectly aligned and can be used for the pickup flatwork construction. ideally they would need a rotation control aligning the center line of the pickup so it's somewher between the last fret angle and bridge angle. personally i do this visually depending on the design i'm looking for, some people have huge theories on pickup positioning but personally i don't believe in it.
that should result in everything needed to quickly generate all the necessary construction curves or geometry for nut/fingerboard/frets/pickups. this is the core of what makes a guitar work, the more precise this dynamic system is the better the guitar plays and sounds.
i posted another thread trying to understand how i could use datasets form spreadsheets,databse, csv to organize the input parameters. What would make sense for the strings for example is hook into a spreadsheet with the different string sets, i attached one for the d'Addario NYXL string line which basically covers all combos that make sense.
The string tension is an interesting one, and implmenting it would sure be overkill albeit super interesting to try. it should be possible to extrapolate from the scale length of each string what the tension for a given string gauge of that string would be so that you could say 'i want a fully balanced set' or 'heavy top light bottom) and it would calculate which SKU from d'addario would best match the required tension. All the strings listed in the spreadsheet are available as single strings to buy.
i'm trying to reorganize everything which helps me understand it. i just discovered the 'hidden wires' feature which is great since once i understood what a certain block does or have finished one of my own, i can get the wires out of the way to carry on undistracted. a bit risky to hide so many wires but it makes it so much easier not to get completely lost :-)
btw, the 'fanned fret' term is trademarked, some guy tried to patent it in the 80's which is a bit silly since it has been done for centuries. there is a level of sophistication above this as well, check out http://www.truetemperament.com/ and that really is something else. it really is astounding how superior the tuning is on those wigglefrets, the problem is that it's rather awkward for string bending and also you can't easily recrown or level the frets when they are used. …
e matching with a dedicated component which creates combinations of items. You can find the [Cross Reference] component in the Sets.List panel.
When Grasshopper iterates over lists of items, it will match the first item in list A with the first item in list B. Then the second item in list A with the second item in list B and so on and so forth. Sometimes however you want all items in list A to combine with all items in list B, the [Cross Reference] component allows you to do this.
Here we have two input lists {A,B,C} and {X,Y,Z}. Normally Grasshopper would iterate over these lists and only consider the combinations {A,X}, {B,Y} and {C,Z}. There are however six more combinations that are not typically considered, to wit: {A,Y}, {A,Z}, {B,X}, {B,Z}, {C,X} and {C,Y}. As you can see the output of the [Cross Reference] component is such that all nine permutations are indeed present.
We can denote the behaviour of data cross referencing using a table. The rows represent the first list of items, the columns the second. If we create all possible permutations, the table will have a dot in every single cell, as every cell represents a unique combination of two source list indices:
Sometimes however you don't want all possible permutations. Sometimes you wish to exclude certain areas because they would result in meaningless or invalid computations. A common exclusion principle is to ignore all cells that are on the diagonal of the table. The image above shows a 'holistic' matching, whereas the 'diagonal' option (available from the [Cross Reference] component menu) has gaps for {0,0}, {1,1}, {2,2} and {3,3}:
If we apply this to our {A,B,C}, {X,Y,Z} example, we should expect to not see the combinations for {A,X}, {B,Y} and {C,Z}:
The rule that is applied to 'diagonal' matching is: "Skip all permutations where all items have the same list index". 'Coincident' matching is the same as 'diagonal' matching in the case of two input lists which is why I won't show an example of it here (since we are only dealing with 2-list examples), but the rule is subtly different: "Skip all permutations where any two items have the same list index".
The four remaining matching algorithms are all variations on the same theme. 'Lower triangle' matching applies the rule: "Skip all permutations where the index of an item is less than the index of the item in the next list", resulting in an empty triangle but with items on the diagonal.
'Lower triangle (strict)' matching goes one step further and also eliminates the items on the diagonal:
'Upper Triangle' and 'Upper Triangle (strict)' are mirror images of the previous two algorithms, resulting in empty triangles on the other side of the diagonal line:
…
giornata inaugurale sarà dedicata alla free-lecture introduttiva finalizzata alla realizzazione di un modello d'architettura complesso attraverso l'utilizzo di comandi e tecniche avanzate di rappresentazione con Grasshopper (plug-in parametrica di Rhinoceros) e 3dsMax. Sarà illustrato inoltre il potenziale di V-ray per 3dsMax realizzando un rendering concettuale. Durante il mini-corso dell' openDAY verranno mostrate le caratteristiche e le potenzialità degli strumenti per far luce sui nuovi valori assunti dalla modellazione 3D. La modellazione 3D sta interessando un pubblico sempre più vasto inserendosi in una nuova fase di ampia disponibilità per conoscenze, software, hardware di prototipazione e modelli. Pur mantenendo tutti i suoi valori già noti la questione si è talmente ampliata fino ad interessare norme giuridiche (diritti sui modelli ,concorrenza con offerte di servizi apparentemente simili, informazioni deformate e onfusione nei media) Makers University[http://www.makersuniversity.com], in collaborazione con parametricart, vi propone un punto di vista ampio e sintetico su queste tematiche.
Al termine della free-lecture, sarà illustrata l'offerta formativa [CLICCA QUI] di parametricart riferita ai corsi che si terranno nei mesi di Gennaio e Febbraio 2013 inseriti all'interno della più ampia programmazione della Makers University. SONO PREVISTE TARIFFE PROMOZIONALI PER COLORO CHE SI ISCRIVERANNO AI CORSI durante l'OpenDAY.
La lezione e la presentazione si terranno nel nuovo spazio co-working il PEDONE.
PROGRAMMAZIONE
- I temi della Makers University [Leo Sorge];
- Modellazione della parametricTower (concept di architettura complessa) utilizzando Grasshopper, applicativo per la modellazione parametrica [VIDEO] [Michele Calvano];
- Modellazione di una copertura reticolare 3D a completamento della parametricTower con 3dsMax utilizzando tecniche di modellazione mesh complesse [Wissam Wahbeh];
- Rendering con V-ray per 3dsMax illustrando la nuova interfaccia nodale [Wissam Wahbeh].
- Question Time per chiarimenti sugli argomenti illustrati.
COME
L'openDAY sarà aperto a tutti gli interessati,completamente gratuito e sarà replicato in tre sessioni di uguali contenuti organizzate nei seguenti orari:
Sessione [1] 11,30 - 13,30
Sessione [2] 15,30 - 17,30
Sessione [3] 17,30 - 19,30
Per necessità di organizzazione è importante la prenotazione all'evento utilizzando il form in fondo alla pagina specificando nella stringa apposita, il nome dell'evento e la sessione (es. open day sessione 1) oltre agli altri dati richiesti.…
la corretta comprensione del software che di livello specialistico per un confronto diretto con alcuni aspetti fondamentali dell’ architettura e del design.
Attraverso l'utilizzo di Grasshopper rivoluzionaria plug-in di Rhinoceros, si insegneranno nuove tecniche di modellazione parametrica.
Grasshopper, permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs abbandonando in parte l'interfaccia classica di Rhinoceros. Quest'ultimo infatti viene sostituito da un menù a tendine dove vengono collezionati nodi utili alla composizione di algoritmi risolutivi.
La plug-in Grasshopper, dimostra come il linguaggio del computer stia diventando un reale strumento progettuale.
Il corso si svolgerà nei seguenti giorni: Sabato 26 Ottobre dalle ore 10.00 alle ore 19.00 Domenica 27 Ottobre dalle ore 10.00 alle ore 19.00 Scadenza preiscrizione per Grasshopper: 23/10
Contenuti
Nella prima parte del corso attraverso degli esercizi base si insegneranno i metodi di esplicitazione degli algoritmi generativi. In queste ore di lezione si illustreranno, attraverso fasi operative, i seguenti argomenti:
Suddivisione degli algoritmi in parametri e componenti;
Tipologie di dati comptiili con Grasshopper e loro combinazione creando definizioni minime;
Funzioni matematiche e logiche;
Data flow, liste e filtri di esclusione;
Costruzione di curve e superfici e loro trasformazione;
Nella seconda parte del corso lo strumento viene specializzato affrontando editing e trasformazioni complesse sulle superfici:
Elaborazione delle superfici di suddivisione;
Tassellazione spaziale di superfici a doppia curvatura;
Gestione di parametri variabili per la progettazione di definizioni finalizzate al controllo del movimento;
Ideazione di algoritmi per il passaggio dal modello digitale al modello reale attraverso la tecnica dello sliceing;
Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Tutor del corso
Il corso sarà tenuto da un docente qualificato, esperto in disegno e rappresentazione dell' architettura e del design:
Michele Calvano| _architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART (Autorized Rhino Trainer)
Info
Responsabile didattico e docente del corso: arch. Michele Calvano cell: 340 3476330
Info mail: parametricart@gmail.com
…
azione tramite interfaccia grafica 6 ore
Interfaccia Grasshopper
Parametri e Componenti
Operazione di Logica e Matematica
Vettori
Case study: concetto base di attrattore
Gestione data matching
Primi approcci alla modellazione parametrica – 4 ore
Trasformazioni di base (sposta ruota scala orienta)
Strumenti di Morphing
Utilizzo di Sweep e Loft e di altri strumenti di creazione superfici già noti da Rhinoceros
Esercitazione pratica: creazione del modello concettuale della Serpentine Gallery - B.I.G.
Focus sulla gestione dei dati - 4 ore
Creazione e gestione delle liste
Studio del data tree
Esercitazione pratica: creazione di un soffitto cassettonato
Creazione di geometrie tramite mesh – 6 ore
Utilizzo degli algoritmi di Delaunay
Utilizzo del Facet Dome
Utilizzo del Substrate
Utilizzo degli algoritmi di Voronoi
Esercitazione pratica: creazione di un gazebo attraverso l’uso di pattern
Creazione di ‘paneling’ di superfici curve – 6 ore
Discretizzazione di una superficie a doppia curvatura tramite pannelli piani
Strumenti analisi superfici
Visualizzazione superfici tramite falsi colori
Esercitazione pratica: creazione di una facciata interattiva
Digital Fabrication e messa in tavola – 6 ore
Interoperabilità tra Grasshopper e altri applicativi
Creazione di Truss parametrica
Gestione dell’abaco dei pezzi
Esercitazione pratica: la Facciata dello Stadio Friuli di Udine - Ipotesi di costruzione e gestione tramita fabbricazione digitale
Requisiti di accesso
Conoscenza delle tematiche CAD di base e dei comandi principali e interfaccia Rhinoceros 5.
Certificazioni
Alla fine del corso verranno rilasciate le certificazioni ufficiali da ART (Authorized Rhinoceros Trainer)
Numero partecipanti
Il corso parte al raggiungimento di un minimo di 4 persone ad un massimo di 8. Ogni partecipante dovrà essere munito di proprio computer con Rhinoceros.
Costo del corso
Il costo del corso è di 600 € + IVA
Sconto di 50,00 € per i giovani che hanno meno di 26 anni.
Ulteriore sconto di 50,00 € Early Bird per tutti coloro che si iscriveranno entro il 5 Settembre 2016
Nel prezzo è compresa l’iscrizione al FabLab Toscana – maggiori informazioni qui
FabLab Toscana
Il FabLab Toscana presenta un insieme di per i propri associati: sarà possibile l’accesso ai laboratori del FabLab (durante i normali orari di apertura), partecipare ai workshops gratuitamente o a prezzi calmierati, l’utilizzo della macchine (seguendo il regolamento interno), …
it seems that was this. Now all is working fine !
Glad that it worked! But I am still a bit worried. Gismo components only modify the gdal-data/osmconf.ini file and no other MapWinGIS file. So your MapWinGIS installation files should not be compromised. The fact that you did not get the "COM CLSID" error message when running the "Gismo Gismo" component suggests that MapWinGIS has been properly installed. So I wonder if the cause for the permanent "invalid shapes" warning has again something with the fact that your system is again not allowing the MapWinGIS to properly edit the osmconf.ini. Maybe this problem will appear again, and again, and reinstallation of MapWinGIS every time can be somewhat bothersome.
- About the terrain generation, is it possible to have the texture from google or other provider mapped onto the terrain surface from gismo component ? (Same as using the ladybug terrain generator in fact). I try to used the image extracted by ladybug component and then applied it to the gismo terrain but the texture is rotated by 90°.
The issue with the rotation can be solved by swapping/reversing the U,V directions of the terrain surface. A slightly more important issue is that terrain surface generated with Gismo "Terrain Generator" component might have a bit smaller radius than what the radius_ input required. This stems from the fact that the terrain data first needs to be downloaded in geographic coordinate system, and then projected. Some projecting issues may occur at the very edges of the projected terrain, so I had to slightly cut out the very edges of the terrain which results in the actual terrain diameters being slightly shorted in both directions. This means that if you apply the same satellite image from Ladybug "Terrain Generator" component to Gismo "Terrain Generator" component the results may not be the same.I attached below a python component which tries to solve this issue by extending the edges of Gismo "Terrain Generator" terrain, and then cutting them with the cuboid of the exact dimensions as the radius_ input. Have in mind that this extension of the original terrain at its edges is not a correct representation of the actual terrain in that location. But rather just an extension of the isoparameteric curve of the terrain surface. So basically: some 0 to 10% (0 to 10 percent of the width and length) of the terrain around all four edges is not the actual terrain for that location, but rather just its extension.The python component is located at the very right of the definition attached below.
Also, if you would like to use the satellite images from Ladybug "Terrain Generator" component along with "OSM shapes", sometimes you may find slight differences in position of the shapes. This is due to openstreetmap data not being based on Google Maps (that's what Ladybug "Terrain Generator" component is using), but rather on Bing, MapQuest and a few others.
- About the requiredKeys_ input of OSM shapes, I understand what you mean and your advice, but in most cases I use it, the component was working fine even without input. I think it's better to extract all tags, values and keys of the selected area, instead of searching for specific ones as I try to find all data related to what I want after, isn't it ? To check what keys are present on the area also.
Ineed, you are correct.I though you were trying to only create a terrain, 3d buildings and maybe find some school or similar 3d building, for these two locations. The recommendation I mentioned previously is due to shapefiles having a limit (2044) to how many keys it can contain. This requires further testing of some big cities locations with maybe larger radii, which I haven't performed due to my poor PC configuration. But in theory, I imagine that it may happen that a downloaded .osm file may have more than 2044 keys. In that case shapefile will only record 2044 of them, and disregard the others. That was my point.But again 2044 is a lot of keys, and I haven't been checking much this in practice. For example, when I set the radius_ to 1000 meters, and use your "3 Rue de Bretonvilliers Paris" location I get around 350 something keys, which is way below the 2044.Another reason why one should use the requiredKeys_ input is to make the Gismo OSM components run quicker: for example, the upper mentioned 350 something keys will result in 350 values for each branch of the "OSM shapes" component's "values" output.Which means if you have 10 000 shapes, the "OSM shapes" component will have 10 000 branches with 350 items on each branch (values). This can make all Gismo OSM components very heavy, and significantly elongate the calculation process.With requiredKeys_ input you may end up with only a couple of tens of items per each branch.Sorry for the long reply.…
Added by djordje to Gismo at 8:57am on June 11, 2017
nowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The Workshop is made up of ten Clusters that respond in diverse ways to the sg2012 Challenge Material Intensities. The Call for Clusters is now open to proposals which respond in innovative ways to this year's challenge.
Deadline: September 19 2011
More information can be found here:
http://smartgeometry.org/index.php?option=com_content&view=article&id=129&Itemid=146
sg2012 takes place from 19-24 March 2012 at EMPAC (http://empac.rpi.edu/) and is hosted by Rensselaer Polytechnic Institute in Troy, upstate New York USA. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts: a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.
sg2012 Challenge Material Intensities
Simulation, Energy, Environment
Imagine the design space of architecture was no longer at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information.Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities.sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org…
DP ($$$ aside), GC, and Grasshopper. Arthur’s original question is very important
and the exact question (and hopefully answer) I was hoping to find on a
forum.
“How to take intelligent 3D parametric generative design models (scripting, etc.) into 2D documents?" Or, deliver the 3D design for evaluation, bid, construction, etc.
I am intrigued by Jon’s comments in the same thread and would like to know how I can learn more about the process (and
pitfalls) of turning over a 3D digital generative models to a contractor/fabricator.
Are there any industry guidelines established I could use as a reference to guide our firm through this type of uncharted territory?
Arthur’s question is very reminiscent of 10 years ago when I was frustrated with the amount of time spent on the development of a 3D model design (physical and/or virtual) only to have to wipe the table clean and start the process all over again in 2D in order to document the project for delivery. From this I jumped head first into BIM and Revit, vowing never to go back to unintelligent 2D line work. I am now working on Bentley software (v8i: Microstation and Bentley Architecture) with the access and desire to venture into Generative Components. I am very intrigued by Rhino/Grasshopper primarily with the apparent ease of use and available resources assisting in the learning process – something not really available with Bentley.
In hindsight, as I am doing my software research I think the current use of Revit and BA (Bentley Architecture) are more of a “bridge”
between the past (decades of digital 2D work, i.e. AutoCAD) and where hopefully
we all will be someday in the near future (100% 3D modeling, i.e. Digital
Project??). Without having the experience
it would appear that DP/CATIA (PLM software) are closer to this than any other
type of software. As complicated as the
industry standards are for the automobile and airline industry, I feel we
(architectural industry and others) are heading in a similar direction with
total understanding (PLM/ Evidence Based Design) of a design (a whole other topic). If anything I think the market will begin to
demand it sooner or later.
Gehry (DP) article NY Times:
http://www.nytimes.com/2009/02/11/business/11gehry.html
I know these type of broad discussions (software vs. software) can be blown out of proportion on forums, but I am would like to read
the pulse of those who are already in the trenches (using Grasshopper, CATIA, Digital Project, Generative Components, others??) and hear your thoughts. Just as valuable would be other threads,
industry articles/reviews of 3D parametric generative design software.
Thanks,
Boyd…