iece could be easily cut using the "plan" curve, the wall need extra attention and manual work to prepare.
This script attempts to automate the preparation of lasercutting curves with some control:
1) Height: The parameter is set using the "Name" property of the Rhino "plan" curve object. Number of storeys (e.g. 5) is to be entered in that field and the script will read it after you press F5 (recompute) in grasshopper. If the block models are not multiples of standardised storey height, you could set "Storey height" in grasshopper to 1 and set exact height to individual "plan" curves in Rhino.
(Special mention: This part of script including reading "Name" property in Rhino and auto-correcting curve direction is attributed to Victor Leung's Laser Cutting Tool for Block Models)
2) Mode of wrapping: The wall could either be "sitting" on the bottom plate and being completely covered by the top plate, or wrapping outside both the bottom and top plate. In either case, material thickness is taken into consideration and the finished model will remain the same size.
3) Extra height option: In preparing flat roof models, one may like to add extra height for parapet wall to make the model more appealing.
4) Easy picking up: Each individual piece has some uncut part (red lines for engrave) to hold itself in place after cutting. There is no need to use masking tape to stick. Individual pieces could be taken out when you are ready to use.
There are also known issues to this script:
1) At internal corners, the adjacent wall will be longer (in wrapping outside mode) or shorter (in sitting inside mode). You have to manual cut at this point.
2) It could not work with only one input curve. (Although it may be a stupid bug,) A dummy rectangle nearby could be created to make it work.
Enjoy,
Sa
Lasercutting Tool for Block Models (Fold and Wrap) by Sa Ng is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Based on a work at http://www.grasshopper3d.com/forum/topics/laser-cutting-tool-for-block-models.
…
s for architectural design, has been heralded as the new paradigm in architecture for the last decade. Digital design techniques coupled with rapid prototyping have permeated architectural education and practice at all levels. But, besides the endless rhetoric and baseless forms, what can these methods actually contribute to the field? What is the scope of their use?
This workshop seeks to answer these questions by investigating surfaces, surface mathematics and manipulations, and using this investigation to introduce students to the issues of design and fabrication of artifacts.
The workshop will thus introduce participants to the basic concepts for design utilizing scripting techniques, through the exploration of the Python language for Rhinoceros. Together with the study of syntax, data types and scripting techniques the focus will be put on the understanding of the digital tools in relation with the common practice and the ways to approach problems a designer might encounter while using them.
Examples of a previous similiar workshop can be found here
Details: Instructors: Marina Konstantatou (University College London), Pierluigi D’Acunto (ETH Zurich), Vincenzo Reale(Zaha Hadid Architects + Architectural Association London), Giancarlo Torpiano (Architectural Association London) *At least two tutors will be present during the workshop Language: English Schedule: 15 – 16 – 17 MAY 2013 // 9.00 – 18.00 Organizers: SMD + LaTiendaDelCAD + PeQuod Venue: McNeel Europe Offices, c/ Roger de Flor 32-34, 08018 Barcelona (map)
Software: Rhinoceros 5 Grasshopper 0.9.0014 Python Component for Grasshopper
Every participant should bring his or her own laptop with the software installed. In the class will be also computers in case any participant could not bring a laptop.
Links to the softwares will be facilitated to participants once they get into the registration process.
Registration: Students* : 395€ (+vat) Professionals: 495€ (+vat)
Early bird promo
Registrations made before 22nd April will get a discount over the price:
Early Bird promo Student* : 295€ (+vat) Early Bird promo Professional: 395€ (+vat)
For registry, please visit la TiendaDelCAD website
* Students will have to proof their status with a student ID
The course will be confirmed as soon as the minimum number of participants is reached, and no later than the 29th April. There will be places for a total of 14 participants.
Venue: McNeel Europe Offices, c/ Roger de Flor 32-34, 08018 Barcelona…
n complex architectural design and fabrication processes, relying heavily on materiality and performance. The programme brings together a range of experts – tutors and lecturers – from internationally acclaimed academic institutions and practices, Architectural Association, Zaha Hadid Architects, among others.
Taking place at the unique atmosphere of AA’s London home, the three-week long programme is formulated as a two-stage process. During the initial stage, participants are introduced to core concepts related to material processes, computational methods, and various digital fabrication techniques. During the second stage, the fabrication and assembly of a full-scale architectural intervention with the use of robotic fabrication techniques unifies the design goals of the programme.
Prominent Features of the programme:
• Teaching team: Participants engage in an active learning environment where the large tutor to student ratio (5:1) allows for personalized tutorials and debates.
• Facilities: AA Digital Prototyping Lab (DPL) offers laser cutting, CNC milling, 3d printing facilities, and 2 KUKA robotic arms.
• Computational skills: The toolset of Summer DLAB includes but is not limited to Rhinoceros, Processing, Grasshopper, and various analysis tools.
• Theoretical understanding: The dissemination of fundamental design techniques and relevant critical thinking methodologies through theoretical sessions and seminars forms one of the major goals of Summer DLAB.
• Professional awareness: Participants ranging from 2nd year students to PhD candidates and full-time professionals experience a highly-focused collaborative educational model which promotes research-based design and making.
• Robotic Fabrication: According to the specific agenda of each year, scaled working models are produced via advanced digital machining tools, followed by the fabrication of one-to-one scale prototypes with the use of KUKA KR60 and KR30 robots.
• Lecture series: Taking advantage of its unique location, London, Summer DLAB creates a vibrant atmosphere with its intense lecture programme.
Eligibility: The workshop is open to architecture and design students and professionals worldwide.
Accreditation: Participants gain 1 Year AA Visiting Membership and are awarded AA Certificate of Attendance at the successful completion of AA Summer DLAB.
Applications: The AA Visiting School requires a fee of £1900 per participant, which includes a £60 Visiting Membership fee. Discount options for groups are available. Please contact the AA Visiting School Coordinator for more details.
The deadline for applications is 17 July 2017. No portfolio or CV, only requirement is the online application form and fees. The online application can be reached from:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=460
For inquiries, please contact:
elif.erdine@aaschool.ac.uk (Programme Head)
alexandros.kallegias@aaschool.ac.uk (Programme Head)…
l coarse mesh
Subdividing this mesh into strips of thin quads
Relaxing/Planarizing this mesh
Splitting and Unrolling
In this post I deal with the first 2 of these stages.
You can download the example definition here:
developable_strips_tutorial.gh
Drawing the initial mesh
To begin with we need a simple quad mesh. This can be modelled manually in Rhino, and only needs to use enough quads to give the topology and very rough form. No need to worry too much about the exact geometry or dimensions at this point, as we will refine and alter it as we go.
One very important thing that we do need to bear in mind though is that all internal vertices must have even valence (I covered this a bit in the earlier post here).
So for example, this is bad:
(because the highlighted vertex is surrounded by 5 faces)
While this is good (and can still be relaxed to the same shape):
(the top and bottom vertices have valence 8, and the vertices between the arms have valence 4)
With a little practice it should be possible to convert any mesh into one that meets this condition.
The reasons why we need this condition should become more clear in the later steps.
First subdivision
This is where we choose how many strips we want our final model to have, by applying a few rounds of subdivision using the Refine component (you could also use Weaverbird here):
Sorting the face directions
While quad meshes do not carry the same information about u/v directions as a NURBS surface, the individual faces do have a sort of direction given by their vertex ordering. However, these face directions are usually not consistently arranged, especially after subdivision.
The Kangaroo MeshDirection component attempts* to orient all the faces in a mesh so that they match with their neighbours.
For example, before sorting, if we draw a line from the midpoint of the first edge of each face to the midpt of its opposite edge, we might get something like this:
Whereas after sorting, we should get something like this:
*note that I say it attempts to orient the faces consistently. In some cases no valid solution exists, for instance if 3 or 5 faces meet around a vertex, hence the requirement mentioned at the start for even valence vertices.
Directional Subdivision
Now that we have consistent face directions across the mesh, we can apply further subdivision, but this time in one direction only. So we go from roughly square quads to thin rectangles. The idea is that as we apply higher levels of this directional subdivision, the final relaxed result goes towards something semi-discrete. A NURBS surface is fully continuous, and a mesh is fully discrete (made up of separate facets), while this strip model will be smooth in one direction and faceted in the other.
Go to part 2 for the next step of the process
…
ooking for an efficient way to perform glazing of complex shapes.
I've only followed the Energy modelling workshops so far so i may have missed some essential components or workflows to achieve my needs. But i've made an attached definition with all my current attempts to get a proper HBzone with the numerous windows faces i will always have to deal with in this project.
I first thought that i was not using the HBObjWGZ correctly, then after some readings it was maybe an upgrading issue, then effectively i had my Therm 7.5 that needed to be reinstaled, but then ... I must be missing an essential HB tricks or workflow i guess ...
So I divided my attempt in two series :
- The Serie 1 : is a simplier version of the project step i'm working on but i'd be glad to achieve it first !
- The Serie 2 : is the real final direction of the project, which consist in sorting/dispatch faces to windowon one side and to an other material on the other, according to the winter sun and a pourcentage param.
Despite it is more complicated than the Serie one, it seems seems to create the same diversity of issues.
Until now, with the 5 different combinations of Serie 1, and the 3 of Serie 2, with and without using the different Glazing/window components, here are the logs i got from both HBZone component or OpenStudio component:
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** BuildingSurface:Detailed="00073E23257843B6A948", invalid Construction Name="ETFE" - has Window materials.">> Has to deal with the way i'm trying to assign too early a customized EPConstruction material ? Done it wrong ? I tried to reload it in the library but doesn't change anything...
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** BuildingSurface:Detailed="000579CD749E46DFA5EA", invalid Construction Name="EXTERIOR WINDOW" - has Window materials.">> Is it an issue in the way i define my surfs both as "WINDOW" (5) for srfType and Outdoors on the same component ?
From Create HBZone -"1. Solution exception:'EPZone' object has no attribute 'shdCntrlZoneInstructs'"
>> Happens when i try to introduce my ETFE EpMaterial after creating my first HBZone, with a Set EP Zone Construction, so this material seems to be not working either before and after trying to create an HB Zone
From Create HBZone- "1. Solution exception: 73df51a3b2144b1e858b has been moved, scaled or rotated."If you need to move or rotate a Honeybee object you should use Honeybee move, rotate or mirror components. You can find them under 12|WIP tab.
>> >> wich seems to exist in some on other thread Here and was a coding bug supposed to be fixed.
And last but not least ...
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** checkSubSurfAzTiltNorm: Outward facing angle of subsurface differs more than 90.0 degrees from base surface.2. The simulation has failed because of this fatal error: ** Fatal ** GetSurfaceData: Errors discovered, program terminates" .
I'm attaching the file with each attempt in this post. The definitions are disabled and the log already copied separatly so there is no need to compute each of them to see what's wrong.
If someone from the beginner to one of the Kings of HoneyBee has any relevant answer/solution to this attempt with complex geometry Issue it will be really nice for me so i could to move forward !!
Thanks in advance guys and have a great day !
…
y from the Rhino model and having the absorption coefficients of the materials that are entered into Pachyderm, why is it not possible to generate a reverberation time diagram, without the need to start any analysis?
MAPPING METHOD: When for example the mapping of the Strenght Index (G) is generated through the "create map" option, succesively I can´t generate any other energy criterion map, but I have to redo the simulation.
Is it a limitation of the software or am I wrong something?
MAPPING METHOD: I kindly wanted to ask what is the difference between minimum and detailed convergence and why the number of reflections order it takes into account for the simulation is not specified. The mapping method take care only of the Raytracing Method or the Image Source too?
MAPPING METHOD: Why is the mapping value that can be exported to Rhino not generated for all the calculation raster points, but maximal only for 100 values?
MAPPING METHOD: This method hasn't been implemented in Grasshopper yet, has it?
RAYTRACING METHOD (Pach:RT): I did a raytracing through the components of GH, using only the Pach_RT, and I had these curious results in terms of time:
RaysCount: 15.000, IS_Order:1 = 5min
RaysCount: 15.000, IS_Order:2 = 12min
RaysCount: 15.000, IS_Order:3 = 3min
RaysCount: 15.000, IS_Order:4 = 8min
RaysCount: 15.000, IS_Order:5 = 3min
Why a raytracing with only 2 order, is more and more extensive than the 3/4 and 5 order?
ANALYSIS RESULT: Would there be a way to export all the results of a simulation, as is done via Odeon, to a .txt list?
I apologize in advance for asking so many questions, I hope you can find the time to answer,
Yours sincerely from Müller-BBM…
option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock"). Then paste them in File->Special Folders->User Object Folder. You can download the example files from here. They act in similar way, Ladybug Photovoltaics components do: we pick a surface, and get an answer to a question: "How much thermal energy, for a certain number of persons can my roof, building facade... generate if I would populate them with Solar Water Heating collectors"? This information can then be used to cover domestic hot water, space heating or space cooling loads:
Components enable setting specific details of the system, or using simplified ones. They cover analysis of domestic hot water load, final performance of the SWH system, its embodied energy, energy value, consumption, emissions... And finding optimal system and storage size. By Dr. Chengchu Yan and Djordje Spasic, with invaluable support of Dr. Willian Beckman, Dr. Jason M. Keith, Jeff Maguire, Nicolas DiOrio, Niraj Palsule, Sargon George Ishaya and Craig Christensen. Hope you will enjoy using the components! References: 1) Calculation of delivered energy: Solar Engineering of Thermal Processes, John Wiley and Sons, J. Duffie, W. Beckman, 4th ed., 2013. Technical Manual for the SAM Solar Water Heating Model, NREL, N. DiOrio, C. Christensen, J. Burch, A. Dobos, 2014. A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015
2) Domestic hot water load: Modeling patterns of hot water use in households, Ernest Orlando Lawrence Berkeley National Laboratory; Lutz, Liu, McMahon, Dunham, Shown, McGrue; Nov 1996. ASHRAE 2003 Applications Handbook (SI), Chapter 49, Service water heating
3) Mains water temperature Residential alternative calculation method reference manual, California energy commission, June 2013. Development of an Energy Savings Benchmark for All Residential End-Uses, NREL, August 2004. Solar water heating project analysis chapter, Minister of Natural Resources Canada, 2004.
4) Pipe diameters and pump power: Planning & Installing Solar Thermal Systems, Earthscan, 2nd edition
5) Sun postion and POA irradiance, the same as for Ladybug Photovoltaics (Michalsky (1988), diffuse irradiance by Perez (1990), ground reflected irradiance by Liu, Jordan (1963))
6) Optimal system and storage tank size: A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015.…
ntación en distintos procesos del Diseño. Se abordaran los conceptos basicos y la metodologia para abordar problemas de diseño a traves del desarrollo de Herramientas Algorítmicas mediante un proceso de programacion visual.
Como nuestras herramientas de trabajo se utilizara Rhinoceros+Grasshopper+Wea verBird
Instructor: Leonardo Nuevo Arenas[Complex Geometry]
Fechas: 5 y 6 de Noviembre 2011
Lugar: Sebastian Bach 5411, Col. La Estancia, Zapopan Jalisco.http://g.co/maps/nc7g6
Cupo: Limitado a 10 plazas
Costo:
Profesionistas: $3,300.00
Estudiantes: $2,800.00
Fecha limite de pago: Viernes 28 de Octubre
Importante:
Los participantes deberán traer su propia Laptop con todo el software y actualizaciones (originales o versiones de demostración oficiales) previamente instaladas. (Se fijara una fecha unos días antes para revisar que todos los equipos estén en orden y listos para trabajar). Si planeas venir de fuera de la ciudad contactanos y te pondremos en contacto con otras personas que también vayan a hacerlo para en caso de desearlo puedan compartir su lugar de estancia.
Contacto:
Complex Geometry
Leo[33 3956 9209]
[nuarle@msn.com]
FARA.Architectural Lab
Aye[33 1050 3482]
[ayeritza.fara@gmail.com]
Para hacer tu pago via deposito o transferencia electronica:
Banamex
No. Cta. 6035264
Sucursal. 0644
CLABE interbancaria: 002671064460352648
Beneficiario: Leonardo Nuevo Arenas
Al hacer el movimiento bancario favor de enviarnos el comprobante (scanner del boucher o captura de pantalla de la transferencia) a los correos de contacto que aparecen mas arriba.
http://cgeometry.blogspot.com/…