width of the other letter
find the intersecting shape with Solid Intersection
re-orient final shape
This process sometimes breaks when a letter has one or more "holes" in it (eg: B, O, R). When this happens, the Solid Intersection component experiences an error and says "Boolean intersection set is empty". I don't know what that means.
I have tried the quick-fixes of flattening and grafting to no avail.
Could somebody shed some light on this issue?
I have internalized the letters into the attached GH def, but am also attaching the illustrator file that I'm using.…
e any affect, but that's way too slow if 90% of the GH program is initialization and creation of source geometry to then simply alter a bit or array here and there. When I use Python directly to change output values that I plug into former slider inputs, again no new solution is triggered at all so I'd have to recalculate the entire Grasshopper program which is simply not how Grasshopper normally works. How do I actually emulate a human changing a slider value one slider at a time in a way that makes Grasshopper behave normally so that only downstream flow is affected in an efficient way?
An related example would be if you have several separate programs in a Grasshopper page and you wanted to only change one of them without triggering full recalculation of them all.
At this point it's almost like a Windows mouse scripting utility is needed but if I need to do combinatorial combinations of all possible slider values, that seems quite thorny too unless I set up a pre-arranged array of values that could then simply be incremented "manually" followed by a right click to bake and then typing commands into Rhino to save to a file. UGH. That would be quite difficult to pull off since I need to control file names, but it's what I seem to need.
I'm using Python since it avoids thorny Grasshopper schemes and it allows me to access Rhino to save baked objects files.…
ving a copy of the surface in the original position. Second, and more frustrating, not all of the surfaces orient properly. A few lay flat but then rotate 90 degrees horizontally.
Any help or insights would be greatly appreciated!
Images and files are below.
grasshopper screenshot 1gh%20problem%20part%201.png
grasshopper screenshot 2gh%20problem%20part%202.png
grasshopper file slat%20wall%20C2.gh…
precise) that unfortunately has more than one staff. This means that I pay the bills (unfortunate to the max). Practice is vertical meaning no Structural/HVAC etc services.
2. AEC Projects are made by teams. Period.
3. Teams are organized with some sort of hierarchy. Period.
4. On each team there's always one leader. Teams can being sampled in group teams - call them clusters (kinda like a List of List of ...)
5. All cluster leaders report to the supreme human being (yours truly). Leader heads are always on my disposal (it's fun to decapitate someone: I do this every Monday).
6. AEC projects are made with 1% idea(s) and 99% of what we call "sludge" (this is not my job: I'm the One , he he).
7. You can't steer any boat if you don't know each @@$#@ nut and bold. In the past there was a naive approach on that matter (ruined automotive companies, potato chip makers, software vendors, political systems, secret service agencies ... etc etc).
8. Efficiency is above all (even above tax-free cash).
9, You can't do ANY AEC real-life thing with what GH has to offer (nor Rhino is an AEC BIM app - it would never be). You simply use GH as a supplement to Generative Components (and/or as stand alone because it's good fun). There's nothing that GH does (I'm speaking solely for AEC as always) that can't being done with Generative Components.
10. I've done so fat 257 projects (a "bit" bigger than a house, he he). Let's say about 51427 drawings (master, master details, details) and 78956 lines of text (specs, cost estimations, space schedules, supplier lists, contracts, cats and 1 dog).
If you combine all the above you'll have the answer (i.e. why I use solely - if possible - code and not GH components). If you can't combine them I'm sorry.
PS: C# is the absolute standard (never judge a language as a "stand-alone" thingy).
best, Peter (Prince of Cynics)
…
he past Architecture was the art of sketching: some "idea" with pencils/crayons + vellum paper (or with some computer) > then "others" trying to make this happen. This in general is known as top-to-bottom approach. Naive and dangerous (for the reputation/reception/acceptance of Architects/Architecture) to the max.
2. These days we work both ways: whilst some work on some "idea" (called it: "assembly") others (in sync mode) resolve the bits and nuts of that "idea" - up to 1:1 level of detail (called it "components"). This is the bottom-to-top approach. Make this your way: NEVER proceed in something whist's not EVERY bit of that something is well addressed (with at least 3-5 ways).
3. The emergence of parametric (GH, Generative Components, Dynamo) in AEC (an approach well known in MCAD word many years ago, mind) made things ... worst: the tremendous topology exploitation capabilities blinded people's mind and they are completely sucked up by the forest forgetting/by passing the critical fact that there's no forest without trees.
4. That's expected: is in the human nature to follow/admire the blink/glam and omit/skip the humble. It's the easy way you know, he he.
5. The tremendous growth of countries the likes of UAE/China/Russia made AEC things ... even worst: lot's of cash available > make us some encomium to Vanity, forget Modesty. You can replace "Vanity" with "New Frontiers" ... if you like fooling yourself.
Some Academics are not capable to understand all that: if they could they would potentially operate in the field (where the pink color is rarely used) and not in fishbowl(s). Some Academics believe that an "idea" is the 99% of the whole whilst actually is less than 1%. But on the other hand anyone can do Architecture (even Architects, he he).
That said (Vanity crisis) you want some other "component" options for this case of yours? (starting with "some" dollars more and ending with the mortgage the house/sell wife+kids option).
take care (and kill them all)…
s (and God knows how many in the next case) that's why (other than the colossal amount of time (for no reason) required for creating them ... try to bake them and measure the file size).
3 .Most non pros believe that the thing that matters the most in engineering is the geometry. Nothing could be further from the truth. Is about the 5% (complex real-life cases etc etc - but this one is very simple geometry wise and not that simple with regard the whole "ideal" AND effective strategy required).
4. So I've included in this Rhino file attached a small portion of your frames as input for the second C#: CAREFULLY study what it does and most importantly why: it gives you the clear indication about why you should attack this on an assembly/component basis by using instance definitions INSTEAD of recreating 14++ K "solids". The difference in performance is COLOSSAL, not to mention the baked Rhino file size.
5. Using instances is IMPOSSIBLE whiteout code (as is the case in 99% or real-life engineering tasks).
6. Geometry was never an issue on that one (is the 5% max of the whole puzzle no matter requirements you may have).
Bad news:
1. Zoom extends doesn't work after importing your data (maybe a NVidia Quadro K4200 driver issue - who knows?): use saved views stored.
So ...the choice is yours, best, Lord of Darkness…
ponents, among other functionalities, is significantly widening the relevance of the toolset.
Meanwhile having used the tools for some time now and have gone through the forum, in my opinion a few critical system controls is still missing - unless I'm missing some understanding.
In order to really make the hourly energy analysis valuable in early massing studies etc. the consideration of indoor climate can be more detailed. The HVAC capacities, max. airrate and min. inlet temperature should be within comfortable ranges and hardsized by user input to reduce internal draft problems. If not considered I find that the analysis could possibly demonstrate good energy behavior and reasonable operative temperature but in reality could cause a bad indoor environment - and when "rectified" at a later stage the energy consumption will increase.
I would like to know how it is possible in HB to set-up a HVAC system with these ventilation controls and a "unlimited" convective/radiant heating system, and how to deal with the issues mentioned below. The inputs parameters exists in the components, but I can't seem to get the right system behaviour.
In the attached file I have gone through 4 scenaries, each with seperate issues in setting up the system (As no template appearantly supports the combined setup the heating system is simulated using an inlet temperature of 99 degrees).
HVACSystem: "ideal air loads" - Issue: no hardsized airrate, no cooling supply air temperature
HVACSystem: "VAV w. reheat" - Issue: no regulation of airrate, no use of input heat supply temperature in heating mode
HVACSystem: "idealairloadsystem" using "additionstrings" -> issue with duplicate zone names
HVACSystem: "idealairloadsystem" using "additionstrings" on multiple zones -> issue with duplicate zone names
Thanks a lot!
Jon…
they may not always give you a clear picture of their precise functionality. I thought this may be an issue with many users so I decided to use this opportunity to list all the parameters with my quick take at describing their functionality. Here it goes:
DEFAULT VERTICAL SHIFT -- Number - Shifts panels vertically creating a custom-sized panel with height of the specified dimension at first row of skin.
DEFAULT HORIZONTAL SHIFT -- Number - Shifts panels horizontally creating a custom-sized panel with width of the specified dimension at first column of skin.
DEFAULT SKIN CHAMFERED CORNER--True/False - If "True" wraps panels around surface corners. If '"False" creates a custom-sized panel if necessary to complete the skin surface at the shared edge, defining this way a sharp corner.
RESET BAY AT POINTS-- True/False - When using Panel Bays (Group of Panels) this option restarts the panel bay at a surface corner.
FLOOR HEIGHT-- Number - The Floor To Floor value of the Skin generated. If Panels are shorter than this value, a leftover 'gap' will be seen at top of panels.
MINIMUM PANEL WIDTH -- Number - If the width of a panel (standard or customized) created during the skin generation is less than this value, the panel won't be created and the placement will be skipped.
MINIMUM PANEL HEIGHT -- Number - If the height of a panel (standard or customized) created during the skin generation is less than this value, the panel won't be created and the placement will be skipped.
MINIMUM PANEL AREA-- Number - If the area of a panel (standard or customized) created during the skin generation is less than this value, the panel won't be created and the placement will be skipped.
PANEL PROFILE TOLERANCE-- Number - If a resulting panel shape is within the specified tolerance value to any already created panel, this panel is used instead of creating a new panel shape. The tolerance specifically tracks the distance between each corner of the new panel and the corresponding corners of the existing panels. This parameter is mostly used in "SURFACE PANEL MODE'', where a large number of custom-shaped panels can be generated, to reduce the number of unique panels created.
GENERATE PANEL TYPES ONLY-- True/False - This parameter allows the Skin Generator to discard the creation of scene geometry but still have the grasshopper panel data being generated. The skin panels can be retrieved as grasshopper geometry using SkinDesinger's Display components.
RESET DF BETWEEN SURFACES-- True/False - When "True", the Design Controllers (Design Functions in v.01) resets to its initial values each time it starts a new skin surface. Used for instance to restart a layout pattern at every new surface.
SURFACE PANEL MODE-- True/False - The "SURFACE PANEL MODE" is used to generate panels matching the shape of the surfaces included in the "skinSurfaceList" input.
SURFACE PANEL ORIENTATION -- Orientation Type - When activating the "SURFACE PANEL MODE'', this parameter defines the orientation of the panel generated relative to the normal of the surface that defines its shape. The acceptable values (found in the "Surface-Panel Mode Orientations" dropdown) are:RESETFLIPROTATE 90ROTATE 90 FLIPROTATE 180ROTATE 180 FLIPROTATE 270ROTATE 270 FLIP
I hope this helps but feel free to reach out if you have any questions!
Santiago
…
a pain to use sometimes. I recently found this great post:
http://www.grasshopper3d.com/forum/topics/formatting-numbers-in-grasshopper
which points to the msdn .net framework standard numeric format strings:
http://msdn.microsoft.com/en-us/library/dwhawy9k.aspx
and the custom ones too:
http://msdn.microsoft.com/en-us/library/0c899ak8.aspx
Sooo... today I was trying to make a 2D array generator for RGB values to use with a RGB LED and an Arduino. For instance, declaring a 2D array in Arduino:
int color[3][3]={{255,0,0},{0,255,0},{0,0,255}};
I'm using the blend color component to spit out transitions between two colors. I want the list in the panel to be in the format above, so I used both the expression component and the string format component (are they the same under the hood?). In any case, if I have R, G and B values coming into the component, I want to format them so the come out looking like {R,G,B}, so I can just copy the output in a panel and paste it into the Arduino IDE. But what about {curly braces}. If the expression/format component uses them in it's syntax, for instance:
Format ("{R:0},{G:0},{B:0}",R,G,B)
how do I get them into the formatting string? I tried escaping them like:
Format ("\{{R:0},{G:0},{B:0}\}",R,G,B)
but that just makes the component angry
Escaping characters is explained in the formatting references above. Is it implemented in this component? Should I be looking at a different approach?
I've included a sample file below.
Thanks!
~BB~
…
ing-in-python?commentId=2985220%3AComment%3A628495
For the most part, I got the serial port to work and I could share the port with other components without wiring the components together using a sticky Python dictionary. There were a couple of issues with closing the port (Rhino had to be restarted).
In any case, I'm back at it. I am however going the C# component route with an eye towards writing my own components with visual studio. I am trying to create bidirectional communication with a serial device in grasshopper. I need more control over the serial port that the generic Firefly components can afford. Furthermore, I would like to understand how to program this myself. The first goal would be to create a few components that could handle various serial tasks, one to open/close port, one to read from port and one to write to it. This is not unlike how I got it to work in python, and is also similar to the logic in Firefly's serial components.
The thing that has me stumped with C# is how one shares the port between components? If one component is responsible for creating and opening/closing the port, how do the read/write components address the instance of the port created in the other component? Python has the sticky dictionary, is there something similar in C#? I'm a novice when it comes to C# and how it works within grasshopper, so maybe I'm missing something simple.
I've attached a klunky definition that uses C# to open/close a serial port. I've tried accessing the port with other components, but I don't know enough to make it work. Again, I'm mainly interested in the mechanics of how one component can access the serial port instance created in another component. If I could get some user objects going for now, I'd be happy. In the future, I want to roll my own components. If anyone has any suggestions, code snippets, or any other forms of enlightenment, I'd be greatly appreciative!
Rhino5 x64 + GH version 0.9.0056
Thanks,
~BB~
…