Grasshopper

algorithmic modeling for Rhino

random spheres on segments line

Hello,

I have got a little problem with my project going on. In grasshopper i want to make a line, which is divided into segments at the kinks. On all these segments, 1 sphere has to be created, at a random position on that segment. 

But, there is a domain for the segments. The spheres have a radius of 150. Every sphere on the segments may not touch the kinks, so there is a domain set at every segment. The domain lays between 150 mm and (length of segment - 150 mm). 

At last, the line needs to be at least 302 mm. This is so in exactly the midpoint a sphere can be created which does not touch the kinks.

My outcome has a lot of spheres, which are generated on the main line, but they are not seperated into the different segments.

The pictures provide maybe better information.

help me!

Views: 466

Attachments:

Replies to This Discussion

Permalink Reply by David Rutten on September 25, 2015 at 11:30am

Do you have this polyline already or do you need to generate it as well?

Permalink Reply by sander geertzen on September 26, 2015 at 3:58am

this polyline is already part of my design, so the line is connected with 1 line in the design

Permalink Reply by Pieter Segeren on September 26, 2015 at 4:34am

Hoi Sander, here's a way:

Attachments:
Permalink Reply by sander geertzen on September 26, 2015 at 4:48am

Hello Pieter,

Thanks a lot! You solved the problem!

thanks for the time! nice day!

RSS

About

Scott Davidson created this Ning Network.

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service