algorithmic modeling for Rhino
Move points creating a polyline by parameters created by the polyline itself
Good day!
I'm struggling with creating a polyline (or lines between points, they don't have to be one line) with are using itself to change it's geometry.
The goal is to, from the points created by dividing a curve, offset them with a static value and then by weaving the original points and the offseted ones create a polyline. The points must be offseted in the direction perpendicular to the polylinesegment created just after the first original point and the second offseted point.
Below is my try, here I use the normal from the curve controlling the original points for the offset direction
Any suggestions?
//Oliver Sjöberg
Views: 903
- Attachments:
-
-
leafhouse-light.ghx, 454 KB
-
Replies to This Discussion
-
Permalink Reply by Pieter Segeren on
-
Hi Oliver, though this is not a complete solution, it may help you.
- Attachments:
-
-
leafhouse_PSG.gh, 12 KB
-
-
-
Permalink Reply by Oliver Sjöberg on
-
Thank you Pieter for your quick answer! I'm having problem opening the file tho...
I'm using GH 8.0010 and Rhino 4.0 SR9
Unable to read beyond the end of the stream.
-
-
-
Why not update GH? Or check the image:
-
-
-
I'm using a computer at my university and the IT-dep take ages to update software here. Thanks for the image!
-
About
Welcome to
Grasshopper
Translate
Search
Photos
Videos
© 2024 Created by Scott Davidson.
Powered by
