cells inside brep

Replies to This Discussion

Permalink Reply by lucas cañada on May 18, 2012 at 3:32pm

Hello karol! my rhino have crased two times openning your files, maybe because my pc...Best

Permalink Reply by Karol Wawrzyniak on May 18, 2012 at 4:36pm

Hi Lucas,

thank you for trying this.

rhino file works fine and then it crash on gh definition?

if thats the case I  reduced number of points so it should be easier for your pc.

sorry i should think about it in advance:)

best

k

Attachments:

• 12_05_17_cells inside brep few points.gh, 28 KB

Permalink Reply by Michael Pryor on May 18, 2012 at 3:56pm

:)

Permalink Reply by Karol Wawrzyniak on May 18, 2012 at 4:44pm

Michael,

thank for your replay,

please attach definition if you could. I am not used to this icon look of componets that is why it is not so easy to understnad what you did.

and by the way with populating points it was working ok as you can see on first image.

later i introduce controled points pattern. so it is good to have a look on definition

Permalink Reply by Michael Pryor on May 18, 2012 at 4:53pm

your definition takes entirely to long to open, you can use any points it does not matter, the component you seek is called in/out

Permalink Reply by Karol Wawrzyniak on May 18, 2012 at 4:57pm

I uploaded definition which should open fast in replay to lucas comment.

moreover i use this componet in my definition... and it does not work as it was working.

I dont know why

best

k

Permalink Reply by Michael Pryor on May 18, 2012 at 5:01pm

the reson it is not working as expected is your brep is open, use a closed brep.

Permalink Reply by Karol Wawrzyniak on May 18, 2012 at 5:06pm

do you know why some cells are open be reps and rest is closed?

I dont get it;(

I tryed to use cap holes component but it was not working...

Permalink Reply by Michael Pryor on May 18, 2012 at 5:23pm

I mean the brep you are using as a "container" it is open

Permalink Reply by Karol Wawrzyniak on May 18, 2012 at 5:33pm

container is closed. "cap holes" works good for it.

Permalink Reply by Michael Pryor on May 18, 2012 at 5:06pm

see here I used a closed sphere, also I suggest you "cull pattern" the points first then make the voronoi3d, as I have done here, It is a faster definition.

Permalink Reply by Karol Wawrzyniak on May 18, 2012 at 5:25pm

got it. it better indeed. thanks for that.

but problem remains:( 

i tested it just for points and points are selected outide brep as well..

• ‹ Previous
• 1
• 2
• Next ›
• Page