energy saving simulate for intelligient lighting system with daylight sensor

hi,

i am doing a simutlation to assess the energy saving of an intelligient lighting system with daylight sensor. the control logic is when the illumination of 0.75m height plane exceed 500lux with daylight, the light will turn off. when the illumination of 0.75m height plane exceed 300lux but not reach 500lux with daylight, the light will turn on 50%. when the illumination of 0.75m height plane drop below 300lux with daylight, the light will turn on 100%.

could anyone tell me if Honeybee can do this kind of simulation. if it can, how?

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Claudio Campanile on November 14, 2015 at 12:14am

Hi Chao

Not sure if this can help. https://www.researchgate.net/publication/280716460_Energy_saving_ex...

Cheers
Claudio

Permalink Reply by Mostapha Sadeghipour Roudsari on November 15, 2015 at 7:18am

Hi Chao,

Claudio's paper should give you a very good picture on the workflow. However in your case since you're control logic is stepped you may need to apply the logic yourself by post-processing the results of an annual simulation.

Mostapha

RSS