kangaroo vault from grid

hi again,

i'm trying to make a vault by hanging this grid pattern. it started as circles so i made then lines. they dont seem to hang as cleanly if i do the same thing with just a hex grid. any input would be appreciated.

thanks so much

Attachments:

grid in kangaroo.gh, 17 KB

Replies to This Discussion

Permalink Reply by cait on May 4, 2015 at 8:04pm

Hi alessandro, here is the newer file and explanation:

if i just use a simple hex grid i can get kangaroo to work and i get the pattern to sag the grid (when restrained to it's corners) but if i use my network it spazes out.

thank you thank you

Attachments:

working grid_001.gh, 16 KB

Permalink Reply by Alessandro Liuti on May 4, 2015 at 8:27pm

Hi,

kangaroo works with distcretised elements - thus you need to approximate your circles into segments. Here a possible solution for the customised grid; i hope that's what you were looking for.

Cheers.

Attachments: