algorithmic modeling for Rhino
NE1 Help with this one please!
What I´m trying to make this time, would be divided in the next steps:
1) Put a cone (geo) inside a B.box.
2) Divide a sphere in U=30 segments and V=30 segments.
3) Make B.Boxes on all those segments.
4) Array the cones all around the sphere (BUT I WANT THE CONES TO FLOW WITH THE SURFACE AS IF THE CENTER OF EACH b.bOX IS POINTING TO THE CENTER OF THE SPHERE).
To accomplish what you see above, I made an array of the cone over a quarter sphere (surface),using the next definition:
1) Put a cone (geo) inside a B.box.
2) Divide a sphere in U=30 segments and V=30 segments.
3) Make B.Boxes on all those segments.
4) Array the cones all around the sphere (BUT I WANT THE CONES TO FLOW WITH THE SURFACE AS IF THE CENTER OF EACH b.bOX IS POINTING TO THE CENTER OF THE SPHERE).
To accomplish what you see above, I made an array of the cone over a quarter sphere (surface),using the next definition:
Views: 758
- Attachments:
Replies to This Discussion
-
Permalink Reply by Dirk Anderson on
-
Try this BBox Morph of a circle and then extrude to centre by vector length.
- Attachments:
-
-
coneSrf.ghx, 161 KB
-
-
-
Permalink Reply by Federico Escobar Salas on
-
Very cool outcome! Thanks!
-
About
Welcome to
Grasshopper
Translate
Search
Photos
Videos
-
Scaling Tower
Added by Parametric House 0 Comments 0 Likes
-
Field Trap
Added by Parametric House 0 Comments 0 Likes
© 2024 Created by Scott Davidson.
Powered by
