Problem with set ep airflow component

Hi!

I´ve been trying to run an energy simulation of an office (using natural ventilation) with the "set ep air flow" component, but since i updated my honybee version, the "run energy simulation" component fails to run the IDF. The balloon message says :

1. The simulation has not run correctly because of this severe error:
** Severe ** Out of range value Numeric Field#3 (Effective Angle), value=360.00000, range={>=0.0 and <360.0}, in ZONEVENTILATION:WINDANDSTACKOPENAREA=ZONE_0NATVENT2

How could i solve this problem?

Thank you all for your attention!

Imagem inline 3

Attachments:

image.png, 257 KB
image (1).png, 279 KB

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on November 12, 2015 at 6:04pm

This looks like an error on our side. Reading the EnergyPlus error tells me that we need to use 359.9 and not 360 for the input. I added this to github (https://github.com/mostaphaRoudsari/Honeybee/issues/417) and we will get back to you soon. Thank you for reporting.

Permalink Reply by Chris Mackey on November 13, 2015 at 9:17am