rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
; GH, this one came out and rhinoceros is disappear...like this
it said " Rhinoceros5's working is stopped. because some problems occured so Rhinoceros5 can't work correctly no longer " then I have no choice but terminate Rhinoceros.
There are some discussion about RhinoIronPython installing numpy though, no one has same problem like me. so Please somebody tell me!!
and one more question...just in case, I tried to install numpy into ironPython2.7
C:\Program Files (x86)\IronPython 2.7>ipy "C:\Program Files (x86)\IronPython 2.7\ironpkg-1.0.0..py" --installBootstrapping: c:\users\owner\appdata\local\temp\tmp2nand1\ironpkg-1.0.0-1.egg 118 KB [.................................................................]
C:\Program Files (x86)\IronPython 2.7>ironpkg -hUsage: ironpkg-script.py [options] [name] [version]
.
.
.
C:\Program Files (x86)\IronPython 2.7>ironpkg scipyWrote configuration file: C:\Users\owner\.ironpkg=============================================================================Traceback (most recent call last): File "C:\Program Files (x86)\IronPython 2.7\ironpkg-script.py", line 10, in <module> File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\main.py", line 364, in main File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 27, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 67, in add_repo File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 92, in write_data_from_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 435, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 654, in http_error_302 File "C:\Program Files (x86)\IronPython 2.7\Lib\httplib.py", line 1261, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 73, in open_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 154, in urlopen File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 547, in http_response File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 467, in error File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 429, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 446, in _open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1240, in https_open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1167, in do_openAttributeError: 'module' object has no attribute '_create_default_https_context'
C:\Program Files (x86)\IronPython 2.7>
how can I deal with this error?…
(1) I have been exporting small sections of a larger model into Maya from Rhino as FBX. In Maya I rotate and scale the models (-90 in X, Scale XYZ 0.001). The Named Views are being saved, but do not have a successful import into the Maya model. They do not appear as in Rhino, and the problem is not solved by scaling or rotating the cameras.
(2) If I try going the other direction, the cameras exported from Maya as FBX are also not aligning with the model in Rhino as they are in Maya.. I will do my best to post some images of the problem and hope you can help.
error !!
This is what the named views look like
here I am trying to the other way with a good view from Maya
strange placement..
This is the best result I can achieve, after I scale the camera by 1000
Any Advice???
Thanks, Robert.
…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
size component supported only ground PV panels and angled roof PV panels.
Download the newest PV SWH system size component from here (Click on "View Raw" to download it. Then move the downloaded .ghuser file to File->Special Folders->User Objects Folder, an confirm to overwrite it with previously located one).
Just a few opinions on the project you are currently working on:This kind of fixed, non-transparent (overhang) PV panels attached to a building facade are vert convenient for locations with higher latitudes.The reason for this is because they (fixed overhang PV panels) are dimensioned according to the sun position at summer solstice. Elevation angles on summer solstice at higher latitude locations are lower, than those of lower latitude locations.Due to Incheon's low latitude (37), you will get rather short length of the PV panels* : less than 10 centimeters (0.097 meters in the attached .gh file below). As you have mentioned, Galapagos needs to be used too.I will just mention some of the good and bad ways in which the upper issue could be somewhat avoided:1) Increasing the vertical distance between PV panels (PV panels appear above every second window).2) Increase the tilt angle. This will increase the length of PV panels also, but will decrease the final annual AC energy output.An example of this solution has been applied at FKI building in Seoul (latitude: 37N):I already did some tests (with tilt angles: 40, 45, 55) and this does not seem like a good solution, though.3) Shrinking the "sun window" by using the minimalSpacingPeriod_ input. In Photovoltaics, a planner is suppose to make the 9h to 15h part of the sun window free of any obstructions. If you try to decrease the "sun window" to 10 to 14h, the length of your PV panels will increase. You can try to experiment a little bit with this (set your minimalSpacingPeriod_ to 21th of June 10 to 14hours). In general, shrinking the sun window on summer solstice is not a good principle during planning.4) Using tracking PV panels, not fixed ones. But Ladybug Photovoltaics components do not support this kind of PV systems. They only support fixed ones.I would personally go with the first option. You can also experiment with the second and third one.Comment back if you have any other questions.-----------------------* By "length of the PV panels" I mean the: tiltedArrayHeight_ input of the PV SWH system size component.…
ents will react to sensors, creating a range of different lighting and spatial effects that will trigger further movement and produce a feedback loop of behaviour and response. To accommodate this responsiveness, the design will be developed using parametric associative modeling, processing, arduino, and digital fabrication using the CNC and Laser Cutters. Students can both develop completely new designs, and/or work on the evolution of the Workshop 1 Supple Pavilion project.
The Visiting School will return to Barracão Escola de Carnaval to evolve the design of the migrating Pavilions, their contents and their context, exploring a design philosophy of interactive event design and the production of a creative fusion of high-tech design generation and fabrication with low-tech redefinition of Carnival-float artisan techniques, paraphernalia, and materials. We will work in the immense and creative Pimpolhos warehouse, collaborating with local artisans of several Samba Schools in the post-industrial, partly-derelict Porto do Rio area, (the birthplace of the Carnival and Samba), introducing digital fabrication techniques. The goal is to create interventions for micro-venues and cultural events that express the identity of the Samba culture within the `Porto Maravilha` planning.
Instruction for the Supple Pavilions workshop series will be led by Rob Stuart-Smith of Kokkugia, Lawrence Friesen of Generative Geometry, Ivan Ivanoff of Interactive Art Estado Lateral Media Lab, Toru Hasegawa of Proxy, with Anne Save de Beaurecueil and Franklin Lee of SUBdV, along with other AA tutors, the Pimpolhos Artistic Directors, and Carnival float-fabricators. Each workshop will provide an introduction to computational design (Grasshopper, Processing and Arduino) and digital fabrication, no previous computational experience is required. Students taking part in multiple workshops will have access to advanced computation instruction. This workshop will produce 1:1 prototyping, exploring the structure and transformations of the pavilions. Final fabrication and assemblage will occur in July.
The workshop is open to architecture and design students and professionals worldwide. Participants can take part in one or more workshops, with fee discounts offered to those interested in multiple workshops.
…
he results are accurate enough.Good to go!Current working directory is set to: C:\002_VIDEO\02_UNI\TU_GRAZ\01_DISSERTATION\02_RESEARCH\08_POMODORO\01_SIMULATION_MODEL/03_HONEYBEE\VF_00\gridBasedSimulation\start cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineRuntime error (IndexOutOfRangeException): index out of range: 0Traceback: line 271, in script…
is set to: C:\002_VIDEO\02_UNI\TU_GRAZ\01_DISSERTATION\02_RESEARCH\08_POMODORO\01_SIMULATION_MODEL/03_HONEYBEE\VF_00\gridBasedSimulation\start cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineRuntime error (IndexOutOfRangeException): index out of range: 0Traceback: line 271, in script…
dy for a wall where we want to analyze its openings. I made a parametric wall that then get's analyzed with different geometries and the idea was just to leave it there for the weekend as it morphed through different iterations. However, after successfully running a test simulation on my pc (just with one iteration), it fails to run the same test on the workplace computer. Any help would be greatly apprecated! Here is the following error:
Sorry! But the number of available CPUs on your machine is 4.
Honeybee set the number of CPUs to 4.
Grid-based Radiance simulation
The component is checking ad, as, ar and aa values. This is just to make sure that the results are accurate enough.
Good to go!
Current working directory is set to: C:\ladybug\Parametric_Shading_Wall\psw_z0.25_t.025_y.2_r90_m3_lux\gridBasedSimulation\
Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Runtime error (PythonException): Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
PS. It says to see line 336…
answer further on Friday.
The "ghdoc" variable and rhinoscriptsyntaxThe ghdoc variable is provided by the component if you select it as "target".You might ask yourself: "why do we need it"?Its use comes from the very design of the established RhinoScript library. This library is imperative, which means it is build from a set of procedures or functions that act on various geometrical types. Additionally, there is one level of indirection: most of the time, the user does not work with the geometry itself in the variable, but rather with Guid of geometry that is present in a document. This is exactly what ghdoc is: it is the document that the RhinoScript library always implicitly targets with all AddSomething() calls (for example, AddLine()).
Based on this comment...RhinoScript use within GhPython may be less idealThat comment is from a previous version of this component that did not have the ghdoc yet.With the ghdoc variable, the standard Rhino document target of RhinoScript is replaced, therefore we can use Grasshopper while leaving the Rhino document unchanged. This saves uncountable Undo's, and makes it easy to structure ideas through the definition graph
...is the rhinoscriptsyntax target irrelevant if using solely RhinoCommon classesYes. If you create class instances (objects), you will need to create also your own collection objects to store them (mostly lists, trees). You can imagine the ghdoc as being an alternative to them, just that you do not access data by index (number), but by Guid. So you can use the RhinoScript or the RhinoCommon libraries independently or mix them. The RhinoScript implementation in Rhino is open-source and is all written in RhinoCommon. Also the ghdoc implementation is open-source, and is here.
RhinoScript and/or RhinoCommon objects which are not recognized as valid Grasshopper geometryYes, sure, Grasshopper handles only a portion of all available types. Basically, unhandled types are all the types that do not exists in the 'Params' tab. For example, there is no textdot and no leader, so on line 149 there is a throw statement and all TextDot calls (about line 350) are commented out. When/if Grasshopper one day will support these types, these calls will be implemented.
DataTreeHere is a small sample. However, I think that 80% of the times it is not necessary to program for DataTrees, as the logic itself can be applied per-list and Grasshopper handles list-iteration.
I hope this helps,
- Giulio_______________giulio@mcneel.comMcNeel Europe…