greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
ion of both Ladybug and Honeybee. Notable among the new components are 51 new Honeybee components for setting up and running energy simulations and 15 new Ladybug components for running detailed comfort analyses. We are also happy to announce the start of comprehensive tutorial series on how to use the components and the first one on getting started with Ladybug can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O
A second one on how to use the new Ladybug comfort components can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v
Here is a short list highlighting some of the capabilities of this current Honeybee release:
1) Run EnergyPlus and OpenStudio Simulations - A couple of components to export your HBZones into IDF or OSM files and run energy simulations right from the grasshopper window! Also included are several components for adjusting the parameters of the simulations and requesting a wide range of possible outputs.
2) Assign EnergyPlus Constructions - A set of components that allow you to assign constructions from the OpenStudio library to your Honeybee objects. This also includes components for searching through the OpenStudio construction/material library and components to create your own constructions and materials.
3) Assign EnergyPlus Schedules and Loads - A set of components for assigning schedules and Loads from the Openstudio library to your Honeybee zones. This includes the ability to auto-assign these based on your program or to tweak individual values. You can even create your own schedules from a stream of 8760 values with the new “Create CSV Schedule” component. Lastly, there is a component for converting any E+ schedule to 8760 values, which you can then visualize with the standard Ladybug components
4) Assign HVAC Systems - A set of components for assigning some basic ASHRAE HVAC systems that can be run with the Export to OpenStudio component. You can even adjust the parameters of these systems right in Grasshopper.
Note: The ASHRAE systems are only available for OpenStudio and can’t be used with Honeybee’s EnergyPlus component. Also, only ideal air, VAV and PTHP systems are currently available but more will be on their way soon!
5) Import And Visualize EnergyPlus Results - A set of components to import numerical EnergyPlus simulation results back into grasshopper such that they can be visualized with any of the standard Ladybug components (ie. the 3D chart or Psychrometric chart). Importers are made for zone-level results as well as surface results and surfaces results can be easily separated based on surface type. This also means that E+ results can be analyzed with the new Ladybug comfort calculator components and used in shade or natural ventilation studies. Lastly, there are a set of components for coloring zone/surface geometry with EnergyPlus results and for coloring the shades around zones with shade desirability.
6) Increased Radiance and Daysim Capabilities - Several updates have also been made to the existing Radiance and Daysim components including parallel Radiance Image-based analysis.
7) Visualize HBObject Attributes - A few components have been added to assist with setting up honeybee objects and ensuing the the correct properties have been assigned. These include components to separate surfaces based on boundary condition and components to label surfaces and zones with virtually any of their EnergyPlus or Radiance attributes.
8) WIP Grizzly Bear gbxml Exporter - Lastly, the release includes an WIP version of the Grizzly Bear gbXML exporter, which will continue to be developed over the next few months.
And here’s a list of the new Ladybug capabilities:
1) Comfort Models - Three comfort models that have been translated to python for your use in GH: PMV, Adaptive, and Outdoor (UTCI). Each of these models has a “Comfort Calculator” component for which you can input parameters like temperature and wind speed to get out comfort metrics. These can be used in conjunction with EPW data or EnergyPlus results to calculate comfort for every hour of the year.
2) Ladybug Psychrometric Chart - A new interactive psychrometric chart that was made possible thanks to the releasing of the Berkely Center for the Built Environment Comfort Tool Code (https://github.com/CenterForTheBuiltEnvironment/comfort-tool). The new psychrometric chart allows you to move the comfort polygon around based on PMV comfort metrics, plot EPW or EnergyPlus results on the psych chart, and see how many hours are made comfortable in each case. The component also allows you to plot polygons representing passive building strategies (like internal heat gain or evaporative cooling), which will adjust dynamically with the comfort polygon and are based on the strategies included in Climate Consultant.
3) Solar Adjusted MRT and Outdoor Shade Evaluator - A component has been added to allow you to account for shortwave solar radiation in comfort studies by adjusting Mean Radiant Temperature. This adjusted MRT can then be factored into outdoor comfort studies and used with an new Ladybug Comfort Shade Benefit Evaluator to design outdoor shades and awnings.
4) Wind Speed - Two new components for visualizing wind profile curves and calculating wind speed at particular heights. These allow users to translate EPW wind speed from the meteorological station to the terrain type and height above ground for their site. They will also help inform the CFD simulations that will be coming in later releases.
5) Sky Color Visualizer - A component has been added that allows you to visualize a clear sky for any hour of the year in order to get a sense of the sky qualities and understand light conditions in periods before or after sunset.
Ready to Start?
Here is what you will need to do:
Download Honeybee and Ladybug from the same link here. Make sure that you remove any old version of Ladybug and Honeybee if you have one, as mentioned on the Ladybug group page.
You will also need to install RADIANCE, DAYSIM and ENERGYPLUS on your system. We already sent a video about how to get RADIANCE and Daysim installed (link). You can download EnergyPlus 8.1 for Windows from the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/?utm_source=EnergyPlus&utm_medium=redirect&utm_campaign=EnergyPlus%2Bredirect%2B1).
“EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings.”
“OpenStudio is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance.”
Make sure that you install ENERGYPLUS in a folder with no spaces in the file path (e.g. “C:\Program Files” has a space between “Program” and “Files”). A good option for each is C:\EnergyPlusV8-1-0, which is usually the default locations when you run the downloaded installer.
New Example Files!
We have put together a large number of new updated example files and you should use these to get yourself started. You can download them from the link on the group page.
New Developers:
Since the last release, we have had several new members join the Ladybug + Honeybee developer team:
Chien Si Harriman - Chien Si has contributed a large amount of code and new components in the OpenStudio workflow including components to add ASHRAE HVAC systems into your energy models and adjust their parameters. He is also the author of the Grizzly Bear gbxml exporter and will be continuing work on this in the following months.
Trygve Wastvedt - Trygve has contributed a core set of functions that were used to make the new Ladybug Colored Sky Visualizer and have also helped sync the Ladybug Sunpath to give sun positions for the current year of 2014
Abraham Yezioro - Abraham has contributed an awesome new bioclimatic chart for comfort analyses, which, despite its presence in the WIP tab, is nearly complete!
Djordje Spasic - Djordje has contributed a number of core functions that were used to make the new Ladybug Wind Speed Calculator and Wind Profile Visualizer components and will be assisting with workflows to process CFD results in the future. He also has some more outdoor comfort metrics in the works.
Andrew Heumann - Andrew contributed an endlessly useful list item selector, which can adjust based on the input list, and has multiple applications throughout Ladybug and Honeybee. One of the best is for selecting zone-level programs after selecting an overall building program.
Alex Jacobson - Alex also assisted with the coding of the wind speed components.
And, as always, a special thanks goes to all of our awesome users who tested the new components through their several iterations. Special thanks goes to Daniel, Michal, Francisco, and Agus for their continuous support. Thanks again for all the support, great suggestions and comments. We really cannot thank you enough.
Enjoy!,
Ladybug + Honeybee Development Team
PS: If you want to be updated about the news about Ladybug and Honeybee like Ladybug’s Facebook page (https://www.facebook.com/LadyBugforGrasshopper) or follow ladybug’s twitter account (@ladybug_tool).
…
peuvent se diviser une surface avec ne importe quel motif imaginable. 3. Ici, je fournir un moyen de le faire via Lunchbox ... cela fonctionne mais il est fixe et donc nous avons besoin de jouer avec des arbres de données afin de créer le motif approprié par cas. 4. L'autre composante est un joint C # qui fait beaucoup de choses autres que de diviser ne importe quelle collection de points avec de nombreux modèles (voir le modèle ANDRE que je ai fait pour vous). 5. Vous devez décomposer une polysurface en morceaux afin de travailler sur les subdivisions. 6. Je donne une autre définition ainsi que pourrait agir comme un tutoriel sur la façon de traiter des ensembles de points via des composants de GH standards et des méthodes classiques.
Avertissez si tous ceux-ci apparaissent floue pour vous: Si oui, je pourrais écrire une définition utilisant des composants de GH classiques - mais vous perdrez les variations de motifs de division.
mieux, Peter
…
and export the geometry out to VVVV to render it LIVE! RawRRRR. In this case, a digital audio workstation Ableton Live, a leading industrial standard in contemporary music production.
the good news is that VVVV and ableton live lite is both free.
https://www.ableton.com/en/products/live-lite/
i am not trying to use ipad as a controller for grasshoppper. I wanted to work with a timeline (similar to MAYA or Ableton or any other DAW(digital audio workstation)) inside grasshopper in an intuitive way. Currently there is no way of SEQUENCING your definition the way you want to see that i know of.
no more combersome export import workflows... i dont need hyperrealistic renderings most of the time. so much time invested in googling the right way to import, export ... mesh settings...this workflow works for some, for some not ...that workflow works if ... and still you cannot render it live nor change sequence of instruction WHILE THE VIDEO is played. and I think no one wants to present rhinoceros viewport. BUT vvvv veiwport is different. it is used for VJing and many custom audio visual installation for events, done professionally. you can see an example of how sound and visuals come together from this post, using only VVVV and ableton. http://vvvv.org/documentation/meso-amstel-pulse
I propose a NEW method. make a definition, wire it to ableton, draw in some midi notes, and see it thru VVVV LIVE while you sequence the animation the WAY YOU WANT TO BE SEEN DURING YOUR PRESENTATION FROM THE BEGINNING, make a whole set of sequences in ableton, go back change some notes in ableton and the whole sequence will change RIGHT INFRONT of you. yes, you can just add some sound anywhere in the process. or take the sound waves (sqaure, saw, whateve) or take the audio and influence geometric parameters using custom patches via vvvv. I cannot even begin to tell you how sophisticated digital audio sound design technology got last ten year.. this is just one example which isn't even that advanced in todays standard in sound design ( and the famous producers would say its not about the tools at all.) http://www.youtube.com/watch?v=Iwz32bEgV8o
I just want to point out that grasshopper shares the same interface with VVVV (1998) and maxforlive, a plug in inside ableton. audio mulch is yet another one that shares this interface of plugging components to each other and allows users to create their own sound instruments. vvvv is built based on vb, i believe.
so current wish list is ...
1) grasshopper recieves a sequence of commands from ableton DONE
thanks to sebastian's OSCglue vvvv patch and this one http://vvvv.org/contribution/vvvv-and-grasshopper-demo-with-ghowl-udp
after this is done, its a matter of trimming and splitting the incoming string.
2) translate numeric oscillation from ableton to change GH values
video below shows what the controll interface of both values (numbers) and the midi notes look like.
https://vimeo.com/19743303
3) midi note in = toggle GH component (this one could be tricky)
for this... i am thinking it would be great if ...it is possible to make "midi learn" function in grasshopper where one can DROP IN A COMPONENT LIKE GALAPAGOS OR TIMER and assign the component to a signal in, in this case a midi note. there are total 128 midi notes (http://www.midimountain.com/midi/midi_note_numbers.html) and this is only for one channel. there are infinite channels in ableton. I usually use 16.
I have already figured out a way to send string into grasshopper from ableton live. but problem is, how for grasshopper to listen, not just take it in, and interpret midi and cc value changes ( usually runs from 0 to 128) and perform certain actions.
Basically what I am trying to achieve is this : some time passes then a parameter is set to change from value 0 to 50, for example. then some time passes again, then another parameter becomes "previewed", then baked. I have seen some examples of hoopsnake but I couldn't tell that you can really control the values in a clear x and y graph where x is time and y is the value. but this woud be considered a basic feature of modulation and automation in music production. NVM, its been DONE by Mr Heumann. https://vimeo.com/39730831
4) send points, lines, surfaces and meshes back out to VVVV
5) render it using VVVV and play with enormous collection of components in VVVV..its been around since 1998 for the sake of awesomeness.
this kind of a digital operation-hardware connection is usually whats done in digital music production solutions. I did look into midi controller - grasshopper work, and I know its been done, but that has obvious limitations of not being precise. and it only takes 0 o 128. I am thinking that midi can be useful for this because then I can program very precise and complex sequence with ease from music production software like ableton live.
This is an ongoing design research for a performative exhibition due in Bochum, Germany, this January. I will post definition if I get somewhere. A good place to start for me is the nesting sliders by Monique . http://www.grasshopper3d.com/forum/topics/nesting-sliders
…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
n be obtained for curved NURBS surfaces as well as unconventional window configurations".
And I also noticed the following information form the optional input in the runEnergySimulation component.
"meshSettings_: Optional mesh settings for your geometry from any one of the native Grasshopper mesh setting components. These will be used to change the meshing of curved surfaces before they are run through EnergyPlus (note that meshing of curved surfaces is done since Energyplus is not able to calculate heat flow through non-planar surfaces). Default Grasshopper meshing is used if nothing is input here but you may want to decrease your calculation time by changing it to Coarse or increase your curvature definition (and calculation time) by making it finer".
1) My case is an one-story, rectangular-plan large hall (40m*70m*25m) with a curved roof. The roof surface is a part of a standard sphere and the walls and floor are all planar (the each wall has one curved edge as showed in the image).
For testing, I threw the original curved roof surface into daylight and energy simulations without making customized meshings, because I assumed that it might be automatically converted to meshs by Honeybee - Am I right? As showed in the image, how can I reduce the number of meshs in a proper way? Must two connected surfaces (i.e. wall and roof) be STRICTLY/SEAMLESSLY connected or not (considering different divisions of meshs in the respective surface)? - Is a connection tolerance allowed?
2) But, when I run the annual daylight simulation for this case, it gave me a lot of warnings "oconv: warning - zero area for polygon".- is that normal? and how to avoid this? Does the daylight simulation allow "curved NURBS surfaces"?
3) Moreover, when I run an energy simulation for this case, it costed extremely long time. It was just so long that I did not even have results out of one simulation. - I guessed it might be the problem caused by the curved roof surface (or automatic meshing?), but I don't have experience of converting a curved NURBS/spheral surface into correct meshs that can be recognized by Honeybee simulations (Daylight and Energy) in a proper way.
4) The large window on the wall was generated by the "_glzRatio". But the automatically generated wall meshs around this window are just too "fine", which might largely increase simulation time. Is there a proper way to get rid of it? (Considering that the size, shape and position of the window will have large influence on the daylight distribution in the building, it is worthy to keep the size, shape and position of the window as it should be in reality).
In sum, considering all above, could your please provide me some suggestions/tutorials/links that might be helpful for dealing with "curved NURBS surfaces" in Honeybee simulations.
Thank you all in advance!
Best,
Ding
…
ing the maps to the broader community.
At the moment, there are just a few known issues left that I have to fix for complex geometric cases but they should run smoothly for most energy models that you generate with Honeybee. Within the next month, I will be clearing up these last issues and, by the end of the month, there will be an updated youtube tutorial playlist on the comfort tools and how to use them.
In the meantime, there's an updated example file (http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map) and I wanted to get you all excited with some images and animations coming out of the design part of my thesis. I also wanted to post some documentation of all of the previous research that has made these climate maps possible and give out some much deserved thanks. To begin, this image gives you a sense of how the thermal maps are made by integrating several streams of data for EnergyPlus:
(https://drive.google.com/file/d/0Bz2PwDvkjovJaTMtWDRHMExvLUk/view?usp=sharing)
To get you excited, this youtube playlist has a whole bunch of time-lapse thermal animations that a lot of you should enjoy:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A
To give a brief summary of what you are looking at in the playlist, there are two proposed designs for completely passive co-habitation spaces in New York and Los Angeles.
These diagrams explain the Los Angeles design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJM0JkM0tLZ1kxUmc/view?usp=sharing)
And this video gives you and idea of how it thermally performs:
These diagrams explain the New York design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJS1BZVVZiTWF4MXM/view?usp=sharing)
And this video shows you the thermal performance:
Now to credit all of the awesome people that have made the creation of these thermal maps possible:
1) As any HB user knows, the open source engines and libraries under the hood of HB are EnergyPlus and OpenStudio and the incredible thermal richness of these maps would not have been possible without these DoE teams creating such a robust modeler so a big credit is definitely due to them.
2) Many of the initial ideas for these thermal maps come from an MIT Masters thesis that was completed a few years ago by Amanda Webb called "cMap". Even though these cMaps were only taking into account surface temperature from E+, it was the viewing of her radiant temperature maps that initially touched-off the series of events that led to my thesis so a great credit is due to her. You can find her thesis here (http://dspace.mit.edu/handle/1721.1/72870).
3) Since the thesis of A. Webb, there were two key developments that made the high resolution of the current maps believable as a good approximation of the actual thermal environment of a building. The first is a PhD thesis by Alejandra Menchaca (also conducted here at MIT) that developed a computationally fast way of estimating sub-zone air temperature stratification. The method, which works simply by weighing the heat gain in a room against the incoming airflow was validated by many CFD simulations over the course of Alejandra's thesis. You can find here final thesis document here (http://dspace.mit.edu/handle/1721.1/74907).
4) The other main development since the A. Webb thesis that made the radiant map much more accurate is a fast means of estimating the radiant temperature increase felt by an occupant sitting in the sun. This method was developed by some awesome scientists at the UC Berkeley Center for the Built Environment (CBE) Including Tyler Hoyt, who has been particularly helpful to me by supporting the CBE's Github page. The original paper on this fast means of estimating the solar temperature delta can be found here (http://escholarship.org/uc/item/89m1h2dg) although they should have an official publication in a journal soon.
5) The ASHRAE comfort models under the hood of LB+HB all are derived from the javascript of the CBE comfort tool (http://smap.cbe.berkeley.edu/comforttool). A huge chunk of credit definitely goes to this group and I encourage any other researchers who are getting deep into comfort to check the code resources on their github page (https://github.com/CenterForTheBuiltEnvironment/comfort_tool).
6) And, last but not least, a huge share of credit is due to Mostapha and all members of the LB+HB community. It is because of resources and help that Mostapha initially gave me that I learned how to code in the first place and the knowledge of a community that would use the things that I developed was, by fa,r the biggest motivation throughout this thesis and all of my LB efforts.
Thank you all and stay awesome,
-Chris…
j
1
c
e
h
k
2
f
-------------------------------------------------------------------------------------------------
To these...
0;0
0;1
0
a
i
------------------------------------------------------------
0;0
0;1
0;2
0
b
g
j
1
c
h
k
------------------------------------------------------------
0;0
0
d
1
e
2
f
------------------------------------------------------------
Thanx……
Analysis Tools (LAT). Our plugin has come a long way in the last 4 years and, while the legacy version will still include some small updates and contributions, we are confident in saying that the changes will be far fewer and the plugin more stable in the following months as we switch gears into the LAT effort. I can say personally that (save for a couple of small capabilities) I have made it through my list of critical features and I will hereafter be working on making these features cross-platform, cleanly-implemented, and well-documented in the new Ladybug Analysis Tools software package. As always, you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
The majority of changes with this release represent “icing on the cake” after a long, multi-year effort to connect to the major open source engines and datasets. So, without further adieu, here is the list of the new capabilities added with this release:
LADYBUG
Stereographic Sky Projections - Thanks to several code contributions from Byron Mardas, all Ladybug sky visualizations now support stereographic projections! Such projections are useful for understanding the hemispherical visualizations in a 2D format and they also make it easier to overlay different sky datasets on top of one another. Check here for an example file showing the sun path overlaid with helpful/harmful parts of the sky and see here for an example file using shading masks representing strategies (like an overhang) on top of the helpful / harmful portions of the sun path.
Wind Rose Upgrades - Devang Chauhan has added several new features to the Ladybug wind rose including both visual and numerical outputs of average wind velocity and frequency for each petal of the rose. Not only does this enhance the usefulness of the rose but it also paves the way for the use of the wind rose to set up CFD simulations once Butterfly is released in the near future. The new features of the wind rose can be seen in this hydra example file.
Complete Set of Local Thermal Discomfort Models - After the last release included components to evaluate radiant asymmetry discomfort (which can be modeled using these example files: 1, 2), today’s release completes Ladybug’s suite of local discomfort models from ASHRAE and the ISO by adding components to account for discomfort from cold draft. Specifically, two draft models have been added for different types of situations. The first is an older model published by P.O. Fanger, which was developed through experiments where subjects had cold air blown on the back of their neck (the most sensitive part of the body to draft). While this is useful for understanding a worst-case scenario, it can greatly overestimate the discomfort for cases of draft at ankle level - a more common occurrence that typically results from the tendency of cold air to sink. For this situation, a second draft discomfort model has been included, which is specifically meant to forecast ankle draft discomfort. The model is currently undergoing review for integration into ASHRAE-55 and a publication outlining the derivation of this model can be found here:
Liu, S., Schiavon, S., Kabanshi, A. and Nazaroff, W. (2016), Predicted Percentage Dissatisfied with Ankle Draft. Indoor Air. Accepted Author Manuscript. doi:10.1111/ina.12364 (http://escholarship.org/uc/item/9076254n).
Special thanks is due to Shichao Liu, Toby Cheung and Stefano Schiavon for sharing the model and the results of their study with the development team. The integration of draft models completes the full integration of ASHRAE-55 and EN-15251 with Ladybug. Now, you can rest assured that, if there is a certain thermal comfort standard that you need to fulfill for a given project, you can model it with the ‘bug!
Window-Based Draft Model - With the integration of draft models, the first question that one might ask is “how should these models be applied to typical design cases?” While the (soon-to-be-released) Butterfly plugin for OpenFOAM should open up a Pandora’s box of possible situations, this release of Ladybug includes a simplified downdraft model from cold vertical surfaces, which helps model several typical cases of draft discomfort. The model has been validated across several papers:
Heiselberg, P. (1994). Draught Risk From Cold Vertical Surfaces. Building and Environment, Vol 29, No. 3, 297-301
Manz, H. and Frank, T. (2003). Analysis of Thermal Comfort near Cold Vertical Surfaces by Means of Computational Fluid Dynamics. Indoor Built Environment. 13: 233-242
It has been built into the “Ladybug_Downdraft Velocity” component and has been included in an example file illustrating discomfort from cold windows in winter. The example is intended to show when glazing ratio and window U-Values are small enough to eliminate perimeter heating - a practice that is aesthetically unpleasing, costly to maintain and wasteful in its energy use.
Operative Temperature on the Psychrometric Chart - This is a feature that should have been added a long time ago but we are finally happy to say that the Ladybug_Psychrometric Chart can draw a comfort polygon assuming that the air temperature and radiant temperature are the same value (aka. an operative temperature psychrometric chart). This operative temperature chart is the format that is needed to use the ASHRAE-55 graphical method and is generally a better representation of the range of comfort in cases where one does not intend to hold the radiant temperature constant. This operative temperature capability is now set as the default on the component but you can, of course, still bring back the older comfort polygon by simply plugging in a value for meanRadiantTemperature_.
Contour Map Visualizations - Using the same inputs as the Ladybug_Recolor Mesh component, the new Ladybug_Contour Mesh component allows you to generate contoured color graphics from the results of any analysis. Now, you to maximize the use of your high-resolution studies with contours that highlight thresholds and gradients!
Image Texture Mapping for Colored Meshes - Antonello DiNunzio has added the very useful Ladybug_Texture Maker component, which allows you to bake Ladybug colored meshes with image texture maps (as opposed to the classic method that used colored vertices). This enables the creation of transparent Ladybug meshes, making it even easier to overlay Ladybug graphics with one another and with Rhino geometry:
This component also adds the ability to render Ladybug + Honeybee meshes with other rendering programs like V-Ray and 3ds Max. So you can produce Ladybug graphics like this!
Finally, image-mapped textures are also the format required for gaming and Virtual Reality software like Unity and Augmented Reality programs like Augment. So now you can export your Ladybug meshes all of the way to the virtual world!
Rhino Sun Component - If you have ever had to set up the sun for a rendering plugin and wished that you could just take your Ladybug sun and use that, then you are in luck! Byron Mardas has contributed a component that lets you set the Rhino sun based on your EPW location data, your north direction (if different from the Y-Axis) and any time of day that you want. Not only does this make it easier to coordinate the Rhino sun with your Ladybug visualizations, but you can also use it for real time shadow previews by setting your Rhino view to “Rendered” and scrolling through a slider.
Rendered Ladybug Animations - With both the image texture mapping and the Rhino sun components released, your first thought might be “it would be great if I could use this all in a rendered animation!” Thankfully, Ladybug has added a new component to help you here. The Ladybug_Render View component works in essentially the same way as the Capture View component, allowing you to make a series of images as you animate through a slider. The major benefit here is that it works with both Rhino Render and V-Ray so that animations like this can be produced effortlessly:
Cone of Vision Added - Antonello Di Nunzio has added a component that allows you to visualize various cones of vision in order to help inform your view studies. You can fine tune parameters to include just text-readable or full peripheral vision and use the resulting view cone to constrict the results of your “Ladybug_View Analysis” studies.
Terrain WIP Components Released as the Gismo Plugin - Our friend Djordje has released a new plugin Gismo - a plugin for GIS environmental analysis. As a result the following 5 terrain components: Horizon Angles, Flow Paths, Terrain Shading Mask, Terrain Generator 2, Terrain Analysis, have been removed from Ladybug+Honeybee's WIP section and are added to Gismo.
HONEYBEE
Search, Select, and Import the Hundreds Outputs from EnergyPlus/OpenStudio - Many of the power users in our community know that EnergyPlus is capable of writing several hundred different outputs from the simulation (well beyond what the basic Honeybee result readers can import). While Honeybee has always allowed one to request these outputs by adding them to the simulationOutputs_ of the component, there has not been an official workflow for searching through all of the possible outputs or importing their specific results… until now! We have added the "Honeybee_Read Result Dictionary" component, which allows you to parse the Result Data Dictionary (or .rrd file) that EnergyPlus outputs during every run of a given model. This allows you to see all of the outputs that are available for the model and you can even search through this list to find a particular output that you are interested in. Once you find what you are looking for, simply copy the text output from the component into a panel and and plug this into simulationOutputs_. Then you can use the "Honeybee_Read EP Custom Result" component to bring your custom results into GH after rerunning the simulation. The example file of an evaporative cooling tower shows how to use the workflow to request and import in the energy removed by the tower.
OpenStudio HVAC System Sizing Results - After the full integration of HVAC in the last release, we realized that a number of people wanted to run EnergyPlus models simply to evaluate the size of the Heating/Cooling system in the model (obtained from the EnergyPlus autosize calculation that is run at the start of every simulation). Such a sizing calculation can be a great way to quantify the anticipated savings from a given strategy (like shading) on the size/cost of the building’s HVAC system. To get the results of the sizing calculation, all that one needs to do is connect the output eioFile from the OpenStudio component to the Honeybee_Read HVAC Sizing component. The outputs will indicate the peak heating/cooling loads of each zone (in Watts) as well as the size of each piece of HVAC equipment in the model. The next time that you are on a project that is about to value-engineer out an exterior shading system, use the workflow in the following example file to show that the client will probably end up paying for it with a more expensive HVAC system: Quantifying HVAC Sizing Impact of Shade.
Improved Memory Usage When Building Large Energy Models - As we take the capabilities of Honeybee to larger and larger models, many of us have begun to run up against a particular limitation of our machines: memory. After upgrading our machines to have 32 GBs of RAM, there was only one way left to alleviate the problem: restructure some of the code. Honeybee now uses an enhanced approach that ensures all the previous iterations of Honeybee objects will be removed from the memory once there is a change. In any case, the considerations of memory are definitely something that we intend to improve with the future Honeybee[+] plugin.
Workflow to Import gbXML Files - While GrizzlyBear has been around for several years, enabling us to export Honeybee zones to gbXML, we have gone for quite some time without a workflow to import gbXML files to Honeybee. The new Honeybee_gbXML to Honeybee component addresses this and establishes an easier path to import models from Revit into honeybee. You can read more about the component in this post.
Window Frame Capabilities Added to OpenStudio - After the implementation of LBNL THERM / WINDOW capabilities in the last two releases, there was one final bridge to build in the Honeybee workflow - fully connecting LBNL WINDOW to Honeybee’s OpenStudio workflow. This release of Honeybee will now write all FrameAndDivider objects exported from LBNL WINDOW glazing systems into the energy simulation, enabling you to account for the frame’s thermal bridging effects. As long as the construction is brought in with the Honeybee_Import WINDOW IDF Report component, the frames associated with the construction will be assigned to all windows that have the construction. Finally, it is worth noting that the current Honeybee will also write all glass spectral data as well as gas (or gas mixture) materials into the simulation. This means that essentially all properties of any IDF export that one makes from LBNL WINDOW can be factored into the OpenStudio energy simulation (with the only exception being BSDF materials).
OpenStudio Daylight Sensors Added - In our previous releases of Honeybee, the only means of correctly account for daylight sensors in an energy simulation was to run an annual daylight simulation and use the resulting schedules for the lighting in the energy simulation. However, this can take a lot of time and work to set up and run, particularly if the daylight control (at the end of the day) will be driven by just one sensor per room. Now, we have added another option, which uses OpenStudio/EnergyPlus’s built-in daylight controls. You can assign just a point and an illuminance target on the “Set Zone Thresholds” component and the lighting will be automatically adjusted in the course of the simulation. It should also be noted that the addition of daylight sensors has also coincided with the addition of blind/shade control based on glare. The same sensor point for daylight can be used to drive dynamic shades in the energy simulation based on glare experienced at this point. This example file shows how to set up daylight controls on the EnergyPlus model and check the lighting power results to see the effect.
Better Defaults for Natural Ventilation - After many good people wrote to me informing me that Honeybee overestimates natural ventilation airflow and I wrote back showing the way that I intended natural ventilation to be set up with the component, it dawned on me that I had selected some poor component defaults. Accordingly, this release includes a window-based natural ventilation option on the Set EP Airflow component that corrects for some of the common issues that I have seen. Insect screens are included by default and the component runs a general check to see if wind-driven cross ventilation is possible before auto-assigning it. The component will air on the side of more-conservative, lower airflow rates unless the user overrides the defaults. Finally, it’s worth noting that all of these changes have not affected the freedom of the Custom WindAndStack option on the component. The new defaults can be viewed in this example file.
CFD Results Can be Plugged into Microclimate Maps - In preparation for the (very soon) release of the Butterfly that connects to the OpenFOAM CFD platform, we just wanted to note that all of the microclimate map recipes can now take an input of a csv file with a matrix of CFD results for wind speed. For the time being, we have used these to produce very high-accuracy, high resolution maps of outdoor comfort. There will be more to follow soon!
We should also note that, in the last release I mentioned that we would be phasing out the EnergyPlus component so that all efforts are focused on the OpenStudio component. While I reiterate that all of the features of the EnergyPlus component are available in the OpenStudio component and I encourage everyone to use the OpenStudio component in order to take advantage of its HVAC capabilities, I have come to realize that many prefer to use the EnergyPlus component out of habit and have not yet gotten the time to understand why the OpenStudio component is an improvement over the EnergyPlus component. As a result, we have decided to leave the EnergyPlus component in place for the time being so that everyone has more time to understand this. The future Ladybug Analysis Tools platform will only interact with EnergyPlus through OpenStudio and so it is recommended that everyone use these two components in the Honeybee plugin will serve as an educational resource to understand our current path moving forward with OpenStudio.
Lastly, it is with great pleasure that we welcome Devang Chauhan and Byron Mardas to the developer team! As mentioned previously Devang has contributed several updates to the Ladybug Wind Rose in addition to finding and solving a multitude of bugs in other components. Byron has contributed code that has enabled the previously-mentioned stereographic sky projections along with a better method for running the Ladybug Sky Mask. Finally, Byron has contributed the Rhino Sun component, which allows you to coordinate your Rhino renders with your Ladybug data. Welcome to the Ladybug team, gentlemen!
As always let us know your comments and suggestions. Cheers!
Ladybug Analysis Tools Development Team…