both my plotter/cutter and wide format printer. I had been running the plotter from my main work laptop - a Win10 machine via the plotters USB port. As it turns out you can't get Win XP drivers for this USB connection so I needed another solution.
I tried to use the plotters DB25 serial port connection using an old DB9 to DB25 modem cable I had in my collection = no luck the plotter wouldn't talk. A bit more research and it turns out these plotters need a 'null modem' cross over cable to operate. I found a pic of the correct wiring online and made up my own with some cable and connectors from the local electronics hobby shop.
With this hooked up and using Hyperterminal I was able to fire some codes to the plotter directly and get a response back - winning!
At this point I got my original code working with the 'net use' redirect from LPT1 to COM1.
HOWEVER - being that the plotter was now on a COM port there are a few more interesting things you can do with it - one is being able to read the paper size/cut area from the printer.
So what I needed to to was find a way to send and receive data to/from the plotter using the serial port.
A bit of research into .NET's serial port interface and using a bunch of small pieces of test code I have manged to completely re-jig this driver.
Upgrades include:
- Direct Serial Port comms using Null Modem cable (a USB to serial adaptor + null modem should also work)
- Plot area read from the plotter - a rectangle the size of the plot area is placed on a separate layer and coloured red
- Testing to see if selected plotting curves are both closed and inside of the cutting area - with errors shown and exiting if they are not right.
- After plot 'parking' of the plot head at the end of the cut items + an adjustable offset (currently requires manual resetting of origin on the plotter before for next cut)
Great thing is it is now 100% running within Rhino Python - no DOS command line calls = no flashing up of the CMD wind. Also no temp files needed on the HDD and no limit to number of curves that can be plotted - tested with 200 or so with no issues.
Overall very happy with whole project - have learnt a LOT about Python and .NET interfacing AND ended up with a very handy/useful tool.
Cheers
DK
# This code is a WIP # It plots directly to a DGI Plotter# via the serial port
import System.IO.Ports as Portsimport rhinoscriptsyntax as rsimport time
#Some setup valuescom_port = 'COM1' #change to match plotter port baud_rate = 9600 #change to match plotter settingplotter_step = .025 #mmfinsh_offset = 10 #mm
#Delete old cutting area and cut objectsif rs.IsLayer('Cutting Area'): rs.PurgeLayer('Cutting Area')if rs.IsLayer('Cutting Objects'): rs.PurgeLayer('Cut Objects')
#Setup Serial PortMyport = Ports.SerialPort(com_port)Port_Write = Ports.SerialPort.WriteMyport.BaudRate = baud_rateMyport.ReadTimeout=5000 #5 secsMyport.Close()Myport.Open()
#Setup PlotterPort_Write(Myport, 'PU;PA0,0;IN;\n')Port_Write(Myport, 'SP1;\n')Port_Write(Myport, 'PA;\n')time.sleep(2)
#Read the Paper size from PlotterPort_Write(Myport, 'OH;') #HPGL read limits codetime.sleep(2)
return1 = ''papersize = ''count = 0char_in_buffer = 0chars_in_buffer = Ports.SerialPort.BytesToRead.GetValue(Myport)
if chars_in_buffer == 0: print 'Plotter not ready' Myport.Close() exit()
while (count < chars_in_buffer): return1 = Myport.ReadChar() papersize = papersize + chr(return1) count = count + 1
papersize = papersize.split(",")rect1 = (float(papersize[2])*plotter_step)rect2 = (float(papersize[3])*plotter_step)
print 'Cutting area = ' + str(rect1) + 'x' + str(rect2)
#place cutting area curve on its own layer, make it red and lock itplane = rs.WorldXYPlane()cutting_area = rs.AddRectangle( plane, (rect1), (rect2))rs.AddLayer (name='Cutting Area', color=(255,0,0), visible=True, locked=True, parent=None)rs.ObjectLayer(cutting_area, 'Cutting Area')
#get plotting objects
allCurves = rs.GetObjects("Select curves to plot", rs.filter.curve)
#test to see if these are closed curves - exit if not
for curve in allCurves: test_closed = rs.IsCurveClosed(curve) if test_closed == 0: print "One or move of these curves are not closed" Myport.Close() exit()
#test to see if these are inside cutting area - exit if not
for curve in allCurves: test_inside = rs.PlanarClosedCurveContainment(curve, cutting_area)
if test_inside==0 or test_inside==1: print "One or more of these curves are outside of cut area" Myport.Close() exit()
#All ok - convert to points and send data to printer
rs.AddLayer (name='Cut Objects', color=(0,255,0), visible=False, locked=True, parent=None)
for curve in allCurves: Port_Write(Myport, 'PU;PA;SP1;\n') polyline = rs.ConvertCurveToPolyline(curve,angle_tolerance=5.0, tolerance=0.025, delete_input=False, min_edge_length=0, max_edge_length=0) points = rs.CurveEditPoints(polyline) rs.ObjectLayer(polyline, 'Cut Objects')
# PU to the first point x = points[0][0] y = points[0][1] Port_Write(Myport, 'PU' + str(int(x / plotter_step)) + ',' + str(int(y / plotter_step)) + ';\n') # PD to every subsequent point i = 1 while i < len(points): x = points[i][0] y = points[i][1] Port_Write(Myport, 'PD' + str(int(x / plotter_step)) + ',' + str(int(y / plotter_step)) + ';\n') i += 1
Port_Write(Myport,'PU;\n')
#find the far end of the cutbox = rs.BoundingBox(allCurves)far_end = str(box[1])far_end = far_end.split(",")far_end = far_end[0]far_end = float(far_end)/plotter_stepfar_end = (int(far_end))+ finsh_offsetfar_end = str(far_end)print (far_end)
#return plotter home and close portPort_Write(Myport, 'PU;PA' + far_end + ',0;IN;\n')Port_Write(Myport, 'SP1;\n')Port_Write(Myport, 'PA;\n')Myport.Close()time.sleep(10)…
ed to develop a component that reads data from a Tracking Server we have built here in our lab, on top of VRPN Server. We developed a client library to communicate with this server and to read data from different devices through the server, making our life easier. The fact is that I need to update data received from a wiimote for example (at a regular time interval) and output this data to feed other components. Our first approach was to test the inclussion of that library into the context of Grasshopper and it worked, but just and only for the first time the component is created of course. Now the problem is to call this update function inside grasshopper multiple times and update the output. I'm new to grasshopper component coding so, it would be nice if I can get some response of an expereinced developer or at least somebody that have developed something like the example I'm exposing here. Some code is posted below to clarify what I'm saying.
...
using VRPNClassLib; //This is our class lib.namespace MyComp{ public class MyComp : GH_Component { private VRPNController controllerWiimote = new VRPNClassLib.VRPNController("WiiMote0@localhost"); private Wiimote wii = new Wiimote();
...
private double rotX, rotY, rotZ; public MyComp() : base("Al required params ok") { try { controllerWiimote.addDevice(wii); } catch (Exception e) { throw new Exception("No wii controller attached to the PC: -->" + e.Message); } }
...
protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.Register_DoubleParam("Pos X", "X", "Wiimote X"); pManager.Register_DoubleParam("Pos Y", "Y", "Wiimote Y"); pManager.Register_DoubleParam("Pos Z", "Z", "Wiimote Z"); } protected override void SolveInstance(IGH_DataAccess DA) {
// If execute MainLoop() here for the first time it works of course, but I need to continuously read data from wiimote, how do I do that
MainLoop(); DA.SetData(0,rotX); DA.SetData(1,rotY); DA.SetData(2,rotZ); }
protected void MainLoop() { controllerWiimote.UpdateData(); //this is the function that updates device data rotX = Math.Round(wii.getSensorRot1(),2); rotY = Math.Round(wii.getSensorRot2(),2); rotZ = Math.Round(wii.getSensorRot3(),2); }
public override Guid ComponentGuid { //Genere el GUID del componente get { return new Guid("8F9858D8-F18E-45f2-90EC-CC23523ACC4F"); } } ... }}
So any sugestions are welcome.
Cheers :)…
[2 of 8] No context surfaces...5. [3 of 8] Writing geometry...6. [4 of 8] Writing Electric Load Center - Generator specifications ...7. [5 of 8] Writing materials and constructions...8. [6 of 8] Writing schedules...9. [7 of 8] Writing loads and ideal air system...10. [8 of 8] Writing outputs...11. ...... idf file is successfully written to : C:\Users\Personal\Desktop\TESI\x006\THOR001\EnergyPlus\THOR001.idf12. 13. Analysis is running!...14. C:\Users\Personal\Desktop\TESI\x006\THOR001\EnergyPlus\eplusout.csv15. ......
Done! Read below for errors and warnings:
16. 17. Program Version,EnergyPlus, Version 8.3.0-6d97d074ea, YMD=2016.01.17 17:56,IDD_Version 8.3.018. 19. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.20. 21. ************* Beginning Zone Sizing Calculations22. 23. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)24. 25. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00126. 27. ** ~~~ ** because vertex 1 of back surface=PELLE_NORD1 is in front of receiving surface=PELLE_COMUNIONE00128. 29. ** ~~~ ** (Dot Product indicator=184.4593)30. 31. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.32. 33. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)34. 35. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00136. 37. ** ~~~ ** because vertex 2 of back surface=PELLE_NORD1 is in front of receiving surface=PELLE_COMUNIONE00138. 39. ** ~~~ ** (Dot Product indicator=184.4593)40. 41. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.42. 43. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)44. 45. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00146. 47. ** ~~~ ** because vertex 3 of back surface=PELLE_NORD1 is in front of receiving surface=PELLE_COMUNIONE00148. 49. ** ~~~ ** (Dot Product indicator=184.4593)50. 51. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.52. 53. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)54. 55. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00156. 57. ** ~~~ ** because vertex 4 of back surface=PELLE_NORD1 is in front of receiving surface=PELLE_COMUNIONE00158. 59. ** ~~~ ** (Dot Product indicator=184.4593)60. 61. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.62. 63. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)64. 65. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00166. 67. ** ~~~ ** because vertex 1 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE00168. 69. ** ~~~ ** (Dot Product indicator=184.4593)70. 71. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.72. 73. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)74. 75. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00176. 77. ** ~~~ ** because vertex 2 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE00178. 79. ** ~~~ ** (Dot Product indicator=184.4593)80. 81. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.82. 83. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)84. 85. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00186. 87. ** ~~~ ** because vertex 3 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE00188. 89. ** ~~~ ** (Dot Product indicator=184.4593)90. 91. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.92. 93. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)94. 95. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=00196. 97. ** ~~~ ** because vertex 4 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE00198. 99. ** ~~~ ** (Dot Product indicator=184.4593)100. 101. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.102. 103. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)104. 105. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001106. 107. ** ~~~ ** because vertex 1 of back surface=PELLE_COMUNIONE002 is in front of receiving surface=PELLE_COMUNIONE001108. 109. ** ~~~ ** (Dot Product indicator=184.4593)110. 111. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.112. 113. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)114. 115. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001116. 117. ** ~~~ ** because vertex 2 of back surface=PELLE_COMUNIONE002 is in front of receiving surface=PELLE_COMUNIONE001118. 119. ** ~~~ ** (Dot Product indicator=184.4593)120. 121. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.122. 123. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)124. 125. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001126. 127. ** ~~~ ** because vertex 1 of back surface=WIN_006_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001128. 129. ** ~~~ ** (Dot Product indicator=182.6148)130. 131. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.132. 133. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)134. 135. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001136. 137. ** ~~~ ** because vertex 2 of back surface=WIN_006_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001138. 139. ** ~~~ ** (Dot Product indicator=92.2297)140. 141. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.142. 143. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)144. 145. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001146. 147. ** ~~~ ** because vertex 3 of back surface=WIN_006_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001148. 149. ** ~~~ ** (Dot Product indicator=92.2297)150. 151. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.152. 153. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)154. 155. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001156. 157. ** ~~~ ** because vertex 1 of back surface=WIN_006_GLZP_1 is in front of receiving surface=PELLE_COMUNIONE001158. 159. ** ~~~ ** (Dot Product indicator=182.6148)160. 161. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.162. 163. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)164. 165. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001166. 167. ** ~~~ ** because vertex 2 of back surface=WIN_006_GLZP_1 is in front of receiving surface=PELLE_COMUNIONE001168. 169. ** ~~~ ** (Dot Product indicator=92.2297)170. 171. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.172. 173. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)174. 175. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001176. 177. ** ~~~ ** because vertex 3 of back surface=WIN_006_GLZP_1 is in front of receiving surface=PELLE_COMUNIONE001178. 179. ** ~~~ ** (Dot Product indicator=182.6148)180. 181. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.182. 183. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)184. 185. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001186. 187. ** ~~~ ** because vertex 1 of back surface=WIN_006_GLZP_2 is in front of receiving surface=PELLE_COMUNIONE001188. 189. ** ~~~ ** (Dot Product indicator=92.2297)190. 191. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.192. 193. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)194. 195. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001196. 197. ** ~~~ ** because vertex 2 of back surface=WIN_006_GLZP_2 is in front of receiving surface=PELLE_COMUNIONE001198. 199. ** ~~~ ** (Dot Product indicator=1.8446)200. 201. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.202. 203. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)204. 205. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001206. 207. ** ~~~ ** because vertex 3 of back surface=WIN_006_GLZP_2 is in front of receiving surface=PELLE_COMUNIONE001208. 209. ** ~~~ ** (Dot Product indicator=1.8446)210. 211. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.212. 213. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)214. 215. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001216. 217. ** ~~~ ** because vertex 1 of back surface=WIN_006_GLZP_3 is in front of receiving surface=PELLE_COMUNIONE001218. 219. ** ~~~ ** (Dot Product indicator=92.2297)220. 221. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.222. 223. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)224. 225. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001226. 227. ** ~~~ ** because vertex 2 of back surface=WIN_006_GLZP_3 is in front of receiving surface=PELLE_COMUNIONE001228. 229. ** ~~~ ** (Dot Product indicator=1.8446)230. 231. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.232. 233. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)234. 235. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001236. 237. ** ~~~ ** because vertex 3 of back surface=WIN_006_GLZP_3 is in front of receiving surface=PELLE_COMUNIONE001238. 239. ** ~~~ ** (Dot Product indicator=92.2297)240. 241. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.242. 243. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)244. 245. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001246. 247. ** ~~~ ** because vertex 3 of back surface=PELLE_COMUNIONE003 is in front of receiving surface=PELLE_COMUNIONE001248. 249. ** ~~~ ** (Dot Product indicator=184.4593)250. 251. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.252. 253. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)254. 255. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001256. 257. ** ~~~ ** because vertex 4 of back surface=PELLE_COMUNIONE003 is in front of receiving surface=PELLE_COMUNIONE001258. 259. ** ~~~ ** (Dot Product indicator=184.4593)260. 261. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.262. 263. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)264. 265. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001266. 267. ** ~~~ ** because vertex 1 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE001268. 269. ** ~~~ ** (Dot Product indicator=184.4593)270. 271. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.272. 273. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)274. 275. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001276. 277. ** ~~~ ** because vertex 2 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE001278. 279. ** ~~~ ** (Dot Product indicator=184.4593)280. 281. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.282. 283. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)284. 285. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001286. 287. ** ~~~ ** because vertex 1 of back surface=WIN_001_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001288. 289. ** ~~~ ** (Dot Product indicator=180.7210)290. 291. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.292. 293. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)294. 295. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001296. 297. ** ~~~ ** because vertex 3 of back surface=WIN_001_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001298. 299. ** ~~~ ** (Dot Product indicator=180.7210)300. 301. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.302. 303. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)304. 305. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001306. 307. ** ~~~ ** because vertex 2 of back surface=WIN_001_GLZP_1 is in front of receiving surface=PELLE_COMUNIONE001308. 309. ** ~~~ ** (Dot Product indicator=180.7210)310. 311. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.312. 313. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)314. 315. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001316. 317. ** ~~~ ** because vertex 3 of back surface=WIN_001_GLZP_2 is in front of receiving surface=PELLE_COMUNIONE001318. 319. ** ~~~ ** (Dot Product indicator=180.7210)320. 321. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.322. 323. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)324. 325. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001326. 327. ** ~~~ ** because vertex 3 of back surface=PELLE_OVEST is in front of receiving surface=PELLE_COMUNIONE001328. 329. ** ~~~ ** (Dot Product indicator=184.4593)330. 331. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.332. 333. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)334. 335. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001336. 337. ** ~~~ ** because vertex 4 of back surface=PELLE_OVEST is in front of receiving surface=PELLE_COMUNIONE001338. 339. ** ~~~ ** (Dot Product indicator=184.4593)340. 341. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.342. 343. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)344. 345. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001346. 347. ** ~~~ ** because vertex 1 of back surface=WIN_002_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001348. 349. ** ~~~ ** (Dot Product indicator=180.7210)350. 351. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.352. 353. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)354. 355. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001356. 357. ** ~~~ ** because vertex 3 of back surface=WIN_002_GLZP_0 is in front of receiving surface=PELLE_COMUNIONE001358. 359. ** ~~~ ** (Dot Product indicator=180.7210)360. 361. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.362. 363. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)364. 365. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001366. 367. ** ~~~ ** because vertex 2 of back surface=WIN_002_GLZP_1 is in front of receiving surface=PELLE_COMUNIONE001368. 369. ** ~~~ ** (Dot Product indicator=180.7210)370. 371. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.372. 373. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)374. 375. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001376. 377. ** ~~~ ** because vertex 1 of back surface=WIN_002_GLZP_2 is in front of receiving surface=PELLE_COMUNIONE001378. 379. ** ~~~ ** (Dot Product indicator=180.7210)380. 381. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.382. 383. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)384. 385. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001386. 387. ** ~~~ ** because vertex 3 of back surface=PELLE_SOTTO is in front of receiving surface=PELLE_COMUNIONE001388. 389. ** ~~~ ** (Dot Product indicator=184.4593)390. 391. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.392. 393. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)394. 395. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001396. 397. ** ~~~ ** because vertex 4 of back surface=PELLE_SOTTO is in front of receiving surface=PELLE_COMUNIONE001398. 399. ** ~~~ ** (Dot Product indicator=184.4593)400. 401. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.402. 403. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)404. 405. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001406. 407. ** ~~~ ** because vertex 7 of back surface=PELLE_SOTTO is in front of receiving surface=PELLE_COMUNIONE001408. 409. ** ~~~ ** (Dot Product indicator=184.4593)410. 411. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.412. 413. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)414. 415. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001416. 417. ** ~~~ ** because vertex 8 of back surface=PELLE_SOTTO is in front of receiving surface=PELLE_COMUNIONE001418. 419. ** ~~~ ** (Dot Product indicator=184.4593)420. 421. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.422. 423. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)424. 425. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001426. 427. ** ~~~ ** because vertex 1 of back surface=PELLE_SOPRA_DUP is in front of receiving surface=PELLE_COMUNIONE001428. 429. ** ~~~ ** (Dot Product indicator=184.4593)430. 431. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.432. 433. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)434. 435. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001436. 437. ** ~~~ ** because vertex 4 of back surface=PELLE_SOPRA_DUP is in front of receiving surface=PELLE_COMUNIONE001438. 439. ** ~~~ ** (Dot Product indicator=184.4593)440. 441. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.442. 443. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)444. 445. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001446. 447. ** ~~~ ** because vertex 5 of back surface=PELLE_SOPRA_DUP is in front of receiving surface=PELLE_COMUNIONE001448. 449. ** ~~~ ** (Dot Product indicator=184.4593)450. 451. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.452. 453. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)454. 455. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001456. 457. ** ~~~ ** because vertex 8 of back surface=PELLE_SOPRA_DUP is in front of receiving surface=PELLE_COMUNIONE001458. 459. ** ~~~ ** (Dot Product indicator=184.4593)460. 461. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.462. 463. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)464. 465. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001466. 467. ** ~~~ ** because vertex 1 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE002468. 469. ** ~~~ ** (Dot Product indicator=167.5695)470. 471. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.472. 473. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)474. 475. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001476. 477. ** ~~~ ** because vertex 2 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE002478. 479. ** ~~~ ** (Dot Product indicator=167.5695)480. 481. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.482. 483. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)484. 485. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001486. 487. ** ~~~ ** because vertex 3 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE002488. 489. ** ~~~ ** (Dot Product indicator=195.1092)490. 491. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.492. 493. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)494. 495. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001496. 497. ** ~~~ ** because vertex 4 of back surface=PELLE_NORD2 is in front of receiving surface=PELLE_COMUNIONE002498. 499. ** ~~~ ** (Dot Product indicator=195.1092)500. 501. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.502. 503. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)504. 505. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001506. 507. ** ~~~ ** because vertex 3 of back surface=PELLE_COMUNIONE001 is in front of receiving surface=PELLE_COMUNIONE002508. 509. ** ~~~ ** (Dot Product indicator=167.5695)510. 511. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.512. 513. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)514. 515. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001516. 517. ** ~~~ ** because vertex 4 of back surface=PELLE_COMUNIONE001 is in front of receiving surface=PELLE_COMUNIONE002518. 519. ** ~~~ ** (Dot Product indicator=167.5695)520. 521. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.522. 523. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)524. 525. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001526. 527. ** ~~~ ** because vertex 1 of back surface=WIN_005 is in front of receiving surface=PELLE_COMUNIONE002528. 529. ** ~~~ ** (Dot Product indicator=32.0568)530. 531. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.532. 533. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)534. 535. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001536. 537. ** ~~~ ** because vertex 2 of back surface=WIN_005 is in front of receiving surface=PELLE_COMUNIONE002538. 539. ** ~~~ ** (Dot Product indicator=139.1556)540. 541. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.542. 543. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)544. 545. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001546. 547. ** ~~~ ** because vertex 3 of back surface=WIN_005 is in front of receiving surface=PELLE_COMUNIONE002548. 549. ** ~~~ ** (Dot Product indicator=139.1556)550. 551. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.552. 553. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)554. 555. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001556. 557. ** ~~~ ** because vertex 4 of back surface=WIN_005 is in front of receiving surface=PELLE_COMUNIONE002558. 559. ** ~~~ ** (Dot Product indicator=32.0568)560. 561. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.562. 563. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)564. 565. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001566. 567. ** ~~~ ** because vertex 1 of back surface=PELLE_COMUNIONE003 is in front of receiving surface=PELLE_COMUNIONE002568. 569. ** ~~~ ** (Dot Product indicator=167.5695)570. 571. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.572. 573. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)574. 575. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001576. 577. ** ~~~ ** because vertex 2 of back surface=PELLE_COMUNIONE003 is in front of receiving surface=PELLE_COMUNIONE002578. 579. ** ~~~ ** (Dot Product indicator=167.5695)580. 581. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.582. 583. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)584. 585. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001586. 587. ** ~~~ ** because vertex 3 of back surface=PELLE_COMUNIONE003 is in front of receiving surface=PELLE_COMUNIONE002588. 589. ** ~~~ ** (Dot Product indicator=167.5695)590. 591. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.592. 593. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)594. 595. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001596. 597. ** ~~~ ** because vertex 4 of back surface=PELLE_COMUNIONE003 is in front of receiving surface=PELLE_COMUNIONE002598. 599. ** ~~~ ** (Dot Product indicator=167.5695)600. 601. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.602. 603. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)604. 605. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001606. 607. ** ~~~ ** because vertex 1 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE002608. 609. ** ~~~ ** (Dot Product indicator=195.1092)610. 611. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.612. 613. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)614. 615. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001616. 617. ** ~~~ ** because vertex 2 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE002618. 619. ** ~~~ ** (Dot Product indicator=195.1092)620. 621. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.622. 623. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)624. 625. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001626. 627. ** ~~~ ** because vertex 3 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE002628. 629. ** ~~~ ** (Dot Product indicator=195.1092)630. 631. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.632. 633. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)634. 635. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001636. 637. ** ~~~ ** because vertex 4 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE002638. 639. ** ~~~ ** (Dot Product indicator=195.1092)640. 641. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.642. 643. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)644. 645. ** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone=001646. 647. ** ~~~ ** because vertex 5 of back surface=PELLE_EST is in front of receiving surface=PELLE_COMUNIONE002648. 649. ** ~~~ ** (Dot Product indicator=195.1092)650. 651. ** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.652. 653. ** Severe ** Problem in interior solar distribution calculation (CHKBKS)654. [...]
thisthe errorthat appen when i lunch E+ with only one zone....what is going on???? …
o está dirigido a estudiantes de arquitectura y diseño de interiores, recién titulados y profesionales interesados en el software o que necesiten conocer las herramientas básicas de las que dispone el programa en los diferentes ámbitos y cómo enfocarlas a arquitectura.
Descripción:El contenido del curso enseñará a utilizar el programa de diseño Rhinoceros 3D aplicando su metodología de trabajo en el campo de la arquitectura, básandose además de la creación de pequeños elementos paramétricos para controlar el diseño y acabar renderizando las geometrías 3d con V-Ray para Rhino.
El curso consta de 3 módulos de 12h de duración cada uno (que pueden realizarse juntos o por separado) en los cuales se profundizará en herramientas de Rhino, Grasshopper y V-Ray a medida que se realizan casos prácticos sobre proyectos arquitectónicos.Se pretende establecer un sistema de trabajo eficiente desde el inicio del modelado hasta la posterior creación de imágenes para documentación del proyecto.
Módulo Rhinoceros Arquitectura:• Conceptos básicos e interfaz de usuario Rhino• Introducción al sistema cartesiano en Rhino• Clases de complejidad de geometría• Importación/exportación de archivos compatibles• Topología NURBS• Trabajo con Sólidos• Estrategias básicas de Superficies• Introducción a Superficies Avanzadas
Módulo Grasshopper:• Conceptos básicos e interfaz de usuario Grasshopper• Introducción a parámetros base y componentes• Matemáticas y trigonometría como herramientas de diseño• Matemáticas aplicadas a creación de Geometría• Introducción a listas simples• Análisis de Superficies y Curvas• Dominios de Superficies y Curvas• Panelado de superficies• Manejo de listas y componentes relacionados• Modificación de panelados en función de atractores• Exportación/Importación de información a Grasshopper
Módulo V-Ray para Rhinoceros:• Conceptos básicos e interfaz de usuario V-Ray• Vistas guardadas• Materiales V-Ray• Materiales, creación y edición• Iluminación (Global Illumination, Sunlight, Lights)• Cámara Física vs Cámara default• Canales de Render• Postprocesado básico de canales
Detalles:Instructores: Alba Armengol Gasull y Oriol Carrasco (SMD Arquitectes)Idioma: CastellanoHorario: 22 JULIO al 26 JULIO 2013 // 10.00 – 14.00 / 16.00 – 20.00Organizadores: SMDLugar: SMD lab, c/Lepant 242 Local 11, 08013 Barcelona (map)
Software:Rhinoceros 5Grasshopper 0.9.00.56V-Ray 1.5 for RhinoAdobe Photoshop CS5Links de versiones de evaluación de los Softwares serán facilitadas a todos los asistentes. Se usará unica y exclusivamente la versión de Rhino para PC. Se ruega a los participantes traer su propio ordenador portátil.
Registro:Modalidad de precio reducido por tres módulos 275€Posibilidad de realizar módulos por separado 99€…
ers of the last surface in the Brep, however, only the corners of the bounding box of the surface are generated)
It seems the rs.SurfacePoints only returens the control points of a surface rather than the actual corners of the surface. Can you advise if there's a way to do it?
Thank you!
Code:
import rhinoscriptsyntax as rsall_parts = rs.ExplodePolysurfaces(brep)centers = []vectors = []lines = []vertices = []cnt = 0for part in all_parts: center, err = rs.SurfaceAreaCentroid(part) centers.append(center) #rs.AddText(str(cnt), center) uv = rs.SurfaceClosestPoint(part, center) vector = rs.SurfaceNormal(part, uv) vectors.append(vector) N_start = center N_end = rs.VectorAdd(center, vector) line = rs.AddLine(N_start, N_end) lines.append(line) #vertices = rs.SurfacePoints(part) vertices = rs.SurfaceEditPoints(part) cnt +=1#C = centers#N = vectors#L = linesV = vertices#todo:#explore the surface methods in rhinoscript.surface...#import rhinoscript.surface.…
Added by Grasshope at 10:34pm on September 15, 2015
noceros 3D, en caso de aprobar satisfactoriamente el examen, se les otorga un reconocimiento avalado por el CMJ y la Secretaría del Trabajo. Este workshop va dirigido principalmente a estudiantes de arquitectura; sin embargo, ya que la parametrización es una herramienta que abarca diferentes ámbitos del diseño, se pueden integrar estudiantes de diseño industrial, artistas o estudiantes que tengan relación con lo gráfico y lo formal. Al finalizar el curso, los asistentes serán capaces de manejar Rhinoceros y Grasshopper en un nivel medio, con el objetivo de que el alumno pueda continuar aprendiendo con alguno de nuestros workshops subsiguientes o de manera autodidacta.
Las personas inscritas deben tener conocimientos básicos de geometría y de preferencia utilizar algún programa de dibujo en 2D o modelación en 3d. Rhino.GetMe Rigid // Enfocado a construir un objeto de diseño parametrizado a cualquier escala, el workshop se divide en tres módulos: Módulo 1 // Rhinoceros 3D // Una sesión de cinco horas. Módulo 2 //Grasshopper // Una sesión de cinco horas. Módulo 3 // Ejercicios prácticos /Tres sesiones de diez horas c/u. Es necesario traer el equipo necesario para trabajar, se cuenta con equipos en caso de que algún alumno no cuente con laptop pero son limitados, por favor avísanos a la brevedad si lo requieres. Se les recomienda que traigan dispositivos de almacenamiento en caso de que necesitemos compartir información.
El costo del Workshop es de $6500.00 para profesionales y $5000 pesos para estudiantes.
Pre-venta únicamente para estudiantes, hasta el día viernes 29 de junio, con un costo de $3500.00 pesos.
El cupo del evento es limitado puedes apartar tu lugar y terminar de liquidar antes del 29 de junio en pre-venta, antes del 6 de junio en admisión general.
Para hacer tu registro al workshop por favor envía un correo a workshop@transformalab.com incluyendo:
Nombre
Universidad u oficina de procedencia
Teléfono móvil
En el caso de estudiantes por favor incluyan una copia escaneada de su Constancia de Estudios para hacer válido su descuento.
Una vez recibida su información se les enviará un correo con la información necesaria para realizar su pago mediante depósito bancario, y posteriormente un mail de confirmación de su participación en el Workshop.
www.transformalab.com…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the
I am not knowledgeable about google maps nor google maps api, but from what I read the two components will definitely show a bit different results due to different topography sources.If it is judging by this 2010 article, your Terrain Generator component offers much higher precisions for USA. Precision goes up to a couple of meters, which is amazing!!On the global scale it offers either SRTM 1 or 3 arc-second data or 30 arc-second GLOBE data. Again this is from the mentioned article, I couldn't find this information by searching the Google Maps website.Terrain Generator 2 component always uses SRTM 1 arc-second data from opentopography.org, and it is limited to 60 degrees north and does not have data for Antarctica. It does not come with satellite image either which is another very convenient feature that you have!I couldn't find information about the allowed radius provided by the Google maps api free account. I limited the "radius_" input to 100 000 meters, even though opentopography.org provides more than that (I successfully downloaded 300 000, but Rhino 5 was not able to create a topography on my PC from such a large amount of data).Even though I couldn't compare the results from two components, by looking at your upper example_LB_terrain_generator.gh definition: set the "I" input of "Surface from points" component to True. In this way the surface will be interpolated through points, which is what we want.
Again thank you for the permission, and I look forward seeing those high precision topography that Google maps offers!!…
of the new challenges presented to the society and architecture in Portugal. With technological developments, tools once limited to not creative areas begin to be part of the everyday life of students in University Architecture Laboratories and change its design processes. The architecture design methods are changing rapidly with the introduction of CAD-CAM software’s. In recent years, new software’s have been available for 3D representation and digital fabrication, which have allowed creating new ways of interacting with the computer and architecture. Contemporary architecture in its various scales, seeks greater flexibility, adaptability and interactivity taking into account both the means and goals of kinetic systems. Thus, it is essential to the creative industry players to acquire new knowledge about the latest technological innovations and how they can solve some of the problems and challenges of today’s society.
The workshop will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in all the design process, to simulation and prototype 3D interactive architecture solutions.
The theoretical and practical workshop (64 hours) taught in English and Portuguese, will be composed of two modules: (1) LS_01: Firefly +Grasshopper + Arduino and Scale Model Fabrication; (2) LS_02: Design Studio – Discursive Wall.
This workshop is intended for students and professionals from different areas of knowledge, (architecture, design, fine arts, engineering, music and programming) who are interested in the process of design: from ideation to prototyping. The participants will generate scale models.
Registration is limited to 20 participants with or without software knowledge. Participants will work individually and in group. Participants must take their own laptops to the workshop. Registrants should complete the form by 28 February 2012. Once registered, you will receive an email confirming your acceptance.
Questions or doubts contact us:
alivingsystem@gmail.com
…
Added by Brimet Silva at 7:07pm on January 16, 2012
the end of the workshop Student performance objectives
- Understanding some basic concepts of Grasshopper, such as; Mathematical Function, Geometry, etc.
- Creating a simple parametric design system.
---------------------------------------------------
Schedule :
Deadline for Registration : April 02,2013
Workshop Starts : Thursday, April 02, 2013 - 5:30 pm
The workshop consists of 10 lectures, Each lecture lasts for 3 hours.
3 lectures per week
---------------------------------------------------
Fees :
600 L.E
You have to fill the Registration Form below for place reservation.We only have few places available.
---------------------------------------------------
Prerequisite :
-Basic knowledge of any 3d modeling software “Sketchup, 3dsmax, Rhino, Maya, ...,etc.” is required to attend the workshop.
---------------------------------------------------
Registration Form:
https://docs.google.com/forms/d/1W5CptB7FyU2d37_aqtSaBN_sxPqj7491HUN_NFgGyg8/viewform
---------------------------------------------------
Previous workshop
https://www.facebook.com/events/469048376477647/
https://www.facebook.com/media/set/?set=a.548388031851299.1073741826.470747186282051&type=1
https://www.facebook.com/events/178326265647678/…