r." I'm sorry to hear that, I take the interface and ease-of-use rather seriously so this sounds like a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative."What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it."[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Visual Programming.I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
Context sensitivity."There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal this time around is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
Sliders."I think they should be optional."They are optional."The “N” should turn into the number if set."What if you assign more than one integer? I think I'd rather see a component with inputs 'N', 'P' and 'X' rather than '5', '8' and '35.7', but I concede that is a personal preference."But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly."Agreed.
Components."Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data."Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
Integration."Why isn't it just live geometry?"This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry."Maybe add more Rhino functionality to GH. GH has no 3D offset."That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
Documentation.Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
2D-ness."I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
Organisation.Agreed. We need to come up with better ways to organise, document, version, share and simplify GH files. GH1 UI is ok for small projects (<100 components) but can't handle more complexity.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
david@mcneel.com…
t file** - ply file with just x,y,z locations. I got it from a 3d scanner. Here is how first few lines of file looks like - ply format ascii 1.0 comment VCGLIB generated element vertex 6183 property float x property float y property float z end_header -32.3271 -43.9859 11.5124 -32.0631 -43.983 11.4945 12.9266 -44.4913 28.2031 13.1701 -44.4918 28.2568 13.4138 -44.4892 28.2531 13.6581 -44.4834 28.1941 13.9012 -44.4851 28.2684 ... ... ... In case you need the data - please email me on **nisha.m234@gmail.com**. **Algorithm:** I am trying to find principal curvatures for extracting the ridges and valleys. The steps I am following is: 1. Take a point x 2. Find its k nearest neighbors. I used k from 3 to 20. 3. average the k nearest neighbors => gives (_x, _y, _z) 4. compute covariance matrix 5. Now I take eigen values and eigen vectors of this covariance matrix 6. I get u, v and n here from eigen vectors. u is a vector corresponding to largest eigen value v corresponding to 2nd largest n is 3rd smallest vector corresponding to smallest eigen value 7. Then for transforming the point(x,y,z) I compute matrix T T = [ui ] [u ] [x - _x] [vi ] = [v ] x [y - _y] [ni ] [n ] [z - _z] 8. for each i of the k nearest neighbors:<br> [ n1 ] [u1*u1 u1*v1 v1*v1] [ a ]<br> [ n2 ] = [u2*u2 u2*v2 v2*v2] [ b ] <br> [... ] [ ... ... ... ] [ c ] <br> [ nk ] [uk*uk uk*vk vk*vk]<br> Solve this for a, b and c with least squares 9. this equations will give me a,b,c 10. now I compute eigen values of matrix [a b b a ] 11. This will give me 2 eigen values. one is Kmin and another Kmax. **My Problem:** The output is no where close to finding the correct Ridges and Valleys. I am totally Stuck and frustrated. I am not sure where exactly I am getting it wrong. I think the normal's are not computed correctly. But I am not sure. I am very new to graphics programming and so this maths, normals, shaders go way above my head. Any help will be appreciated. **PLEASE PLEASE HELP!!** **Resources:** I am using Visual Studio 2010 + Eigen Library + ANN Library. **Other Options used** I tried using MeshLab. I used ball pivoting triangles remeshing in MeshLab and then applied the polkadot3d shader. If correctly identifies the ridges and valleys. But I am not able to code it. **My Function:** //the function outputs to ply file void getEigen() { int nPts; // actual number of data points ANNpointArray dataPts; // data points ANNpoint queryPt; // query point ANNidxArray nnIdx;// near neighbor indices ANNdistArray dists; // near neighbor distances ANNkd_tree* kdTree; // search structure //for k = 25 and esp = 2, seems to got few ridges queryPt = annAllocPt(dim); // allocate query point dataPts = annAllocPts(maxPts, dim); // allocate data points nnIdx = new ANNidx[k]; // allocate near neigh indices dists = new ANNdist[k]; // allocate near neighbor dists nPts = 0; // read data points ifstream dataStream; dataStream.open(inputFile, ios::in);// open data file dataIn = &dataStream; ifstream queryStream; queryStream.open("input/query.
pts", ios::in);// open data file queryIn = &queryStream; while (nPts < maxPts && readPt(*dataIn, dataPts[nPts])) nPts++; kdTree = new ANNkd_tree( // build search structure dataPts, // the data points nPts, // number of points dim); // dimension of space while (readPt(*queryIn, queryPt)) // read query points { kdTree->annkSearch( // search queryPt, // query point k, // number of near neighbors nnIdx, // nearest neighbors (returned) dists, // distance (returned) eps); // error bound double x = queryPt[0]; double y = queryPt[1]; double z = queryPt[2]; double _x = 0.0; double _y = 0.0; double _z = 0.0; #pragma region Compute covariance matrix for (int i = 0; i < k; i++) { _x += dataPts[nnIdx[i]][0]; _y += dataPts[nnIdx[i]][1]; _z += dataPts[nnIdx[i]][2]; } _x = _x/k; _y = _y/k; _z = _z/k; double A[3][3] = {0,0,0,0,0,0,0,0,0}; for (int i = 0; i < k; i++) { double X = dataPts[nnIdx[i]][0]; double Y = dataPts[nnIdx[i]][1]; double Z = dataPts[nnIdx[i]][2]; A[0][0] += (X-_x) * (X-_x); A[0][1] += (X-_x) * (Y-_y); A[0][2] += (X-_x) * (Z-_z); A[1][0] += (Y-_y) * (X-_x); A[1][1] += (Y-_y) * (Y-_y); A[1][2] += (Y-_y) * (Z-_z); A[2][0] += (Z-_z) * (X-_x); A[2][1] += (Z-_z) * (Y-_y); A[2][2] += (Z-_z) * (Z-_z); } MatrixXd C(3,3); C <<A[0][0]/k, A[0][1]/k, A[0][2]/k, A[1][0]/k, A[1][1]/k, A[1][2]/k, A[2][0]/k, A[2][1]/k, A[2][2]/k; #pragma endregion EigenSolver<MatrixXd> es(C); MatrixXd Eval = es.eigenvalues().real().asDiagonal(); MatrixXd Evec = es.eigenvectors().real(); MatrixXd u,v,n; double a = Eval.row(0).col(0).value(); double b = Eval.row(1).col(1).value(); double c = Eval.row(2).col(2).value(); #pragma region SET U V N if(a>b && a>c) { u = Evec.row(0); if(b>c) { v = Eval.row(1); n = Eval.row(2);} else { v = Eval.row(2); n = Eval.row(1);} } else if(b>a && b>c) { u = Evec.row(1); if(a>c) { v = Eval.row(0); n = Eval.row(2);} else { v = Eval.row(2); n = Eval.row(0);} } else { u = Eval.row(2); if(a>b) { v = Eval.row(0); n = Eval.row(1);} else { v = Eval.row(1); n = Eval.row(0);} } #pragma endregion MatrixXd O(3,3); O <<u, v, n; MatrixXd UV(k,3); VectorXd N(k,1); for( int i=0; i<k; i++) { double x = dataPts[nnIdx[i]][0];; double y = dataPts[nnIdx[i]][1];; double z = dataPts[nnIdx[i]][2];; MatrixXd X(3,1); X << x-_x, y-_y, z-_z; MatrixXd T = O * X; double ui = T.row(0).col(0).value(); double vi = T.row(1).col(0).value(); double ni = T.row(2).col(0).value(); UV.row(i) << ui * ui, ui * vi, vi * vi; N.row(i) << ni; } Vector3d S = UV.colPivHouseholderQr().solve(N); MatrixXd II(2,2); II << S.row(0).value(), S.row(1).value(), S.row(1).value(), S.row(2).value(); EigenSolver<MatrixXd> es2(II); MatrixXd Eval2 = es2.eigenvalues().real().asDiagonal(); MatrixXd Evec2 = es2.eigenvectors().real(); double kmin, kmax; if(Eval2.row(0).col(0).value() < Eval2.row(1).col(1).value()) { kmin = Eval2.row(0).col(0).value(); kmax = Eval2.row(1).col(1).value(); } else { kmax = Eval2.row(0).col(0).value(); kmin = Eval2.row(1).col(1).value(); } double thresh = 0.0020078; if (kmin < thresh && kmax > thresh ) cout << x << " " << y << " " << z << " " << 255 << " " << 0 << " " << 0 << endl; else cout << x << " " << y << " " << z << " " << 255 << " " << 255 << " " << 255 << endl; } delete [] nnIdx; delete [] dists; delete kdTree; annClose(); } Thanks, NISHA…
inner As Curve() = section.ToNurbsCurve().Offset(normal, pc, -plate, 1e-3, 1e-4, Rhino.Geometry.CurveOffsetCornerStyle.Sharp)
the error message is:
"
{0}0. Error: Het oplossen van de overbelasting is mislukt omdat dit aantal argumenten door geen enkele toegankelijke Offset wordt geaccepteerd. (line 104)
"
this is the VBA script:
"Option Strict OffOption Explicit On'Import SDK and Framework namespacesImports RhinoImports Rhino.GeometryImports Rhino.CollectionsImports GrasshopperImports Grasshopper.KernelImports Grasshopper.Kernel.DataImports Grasshopper.Kernel.TypesImports GH_IOImports GH_IO.SerializationImports SystemImports System.IOImports System.XmlImports System.DataImports System.DrawingImports System.ReflectionImports System.CollectionsImports System.Windows.FormsImports Microsoft.VisualBasicImports System.Collections.GenericImports System.Runtime.InteropServices'Code generated by Grasshopper(R) (except for RunScript() content and Additional content)'Copyright (C) 2011 - Robert McNeel & Associates<System.Runtime.CompilerServices.CompilerGenerated()> _Public Class Script_Instance Implements IGH_ScriptInstance#Region "Members" ''' <summary>List of error messages. Do not modify this list directly.</summary> Private __err As New List(Of String) ''' <summary>List of print messages. Do not modify this list directly, use the Print() and Reflect() functions instead.</summary> Private __out As New List(Of String) ''' <summary>Represents the current Rhino document.</summary> Private doc As RhinoDoc = RhinoDoc.ActiveDoc ''' <summary>Represents the Script component which maintains this script.</summary> Public owner As Grasshopper.Kernel.IGH_ActiveObject#End Region#Region "Utility functions" ''' <summary>Print a String to the [Out] Parameter of the Script component.</summary> ''' <param name="text">String to print.</param> Private Sub Print(ByVal text As String) __out.Add(text) End Sub ''' <summary>Print a formatted String to the [Out] Parameter of the Script component.</summary> ''' <param name="format">String format.</param> ''' <param name="args">Formatting parameters.</param> Private Sub Print(ByVal format As String, ByVal ParamArray args As Object()) __out.Add(String.Format(format, args)) End Sub ''' <summary>Print useful information about an object instance to the [Out] Parameter of the Script component. </summary> ''' <param name="obj">Object instance to parse.</param> Private Sub Reflect(ByVal obj As Object) __out.Add(GH_ScriptComponentUtilities.ReflectType_VB(obj)) End Sub ''' <summary>Print the signatures of all the overloads of a specific method to the [Out] Parameter of the Script component. </summary> ''' <param name="obj">Object instance to parse.</param> Private Sub Reflect(ByVal obj As Object, ByVal method_name As String) __out.Add(GH_ScriptComponentUtilities.ReflectType_VB(obj, method_name)) End Sub#End Region ''' <summary> ''' This procedure contains the user code. Input parameters are provided as ByVal arguments, ''' Output parameter are ByRef arguments. You don't have to assign output parameters, ''' they will be null by default. ''' </summary> Private Sub RunScript(ByVal p0 As Point3d, ByVal p1 As Point3d, ByVal p2 As Point3d, ByVal pc As Point3d, ByVal plate As Double, ByVal itt As Integer, ByVal dev As Double, ByRef crvout As Object, ByRef crvin As Object, ByRef sec As Object, ByRef opp As Object, ByRef div As Object, ByRef pt4 As Object) 'your code goes here… opp = "test01" Dim section As New Polyline(5) section.Add(p0) section.Add(p1) section.Add(p2) section.Add(pc) section.Add(p0) Dim normal As Vector3d = vector3d.CrossProduct((p1 - p0), (p2 - p0)) Dim area As Double Dim chicken_int As Int32 = 0 Dim XX As Double Dim YY As Double Do chicken_int += 1 If (chicken_int > itt) Then Exit Do 'Compute the section offset Dim inner As Curve() = section.ToNurbsCurve().Offset(normal, pc, -plate, 1e-3, 1e-4, Rhino.Geometry.CurveOffsetCornerStyle.Sharp) Dim edges As New CurveList(inner) edges.Add(section.ToNurbsCurve()) crvin = edges Dim sections As Brep() = Brep.CreatePlanarBreps(edges) If (sections Is Nothing) Then Exit Do opp = "test02" 'Compute the centroid of the current section Dim am As AreaMassProperties = AreaMassProperties.Compute(sections(0)) Dim ct As Point3d = am.Centroid XX = am.CentroidCoordinatesMomentsOfInertia.X YY = am.CentroidCoordinatesMomentsOfInertia.Y area = am.Area Dim dx As Vector3d = pc - ct 'Compute the error of the current centroid Dim dl As Double = dx.Length div = dl 'Update output values crvout = section crvin = inner sec = sections(0) opp = area If (dl < dev) Then Exit Do 'Adjust outline with a boosting factor. section(3) += dx * 4 Loop pt4 = section(3) crvout = section End Sub '<Custom additional code> '</Custom additional code> End Class
"…
s. (Go to RCE Tabs)
Normaly a compoment is disable.
Fill the 3 parameters: name, e-mail and company.
Enable the component with the right mouse button on the component and enable.
A file is created here:
C:\RhinoDeveloppements\RhinoCivilEngineering\license\licence_a_envoyer.txt
Send it to this address:
rhinodeveloppements@gmail.com
You will receive your license within 24 hours
----------------------------------------------------------------------
Pour procéder à la requête de licence, merci de suivre ces étapes.
1. Installer RhinoCivil Engineering
2.Charger Rhinoceros et Grasshoper
3.Glisser Déposer le composant RCE Protection sur le canevas de Grasshopper.(Sur le panneau RCE)
Normalement le composant est désactiver.
4. Remplir les 3 paramètres: Nom, Adresse mail et société.
Activer le composant avec un clic droit sur le composant et "enable"
Un fichier est alors créer ici:
C:\RhinoDeveloppements\RhinoCivilEngineering\license\licence_a_envoyer.txt
Envoyer le à cette adresse:
rhinodeveloppements@gmail.com
Vous recevrez votre licence dans les 24 heures.…
en la práctica de nuevos métodos de diseño y fabricación utilizando herramientas digitales. Estos procedimientos emergentes están cambiando radicalmente la manera en que nos aproximamos al proceso de diseño en términos de concepción y producción. Los participantes serán introducidos en el uso de softwares de modelado 2d y 3d para la generación de geometrías que serán posteriormente mecanizadas in situ en una máquina de control numérico CNC de 3 ejes.
¡AL FINAL DEL CURSO TE LLEVAS TU LÁMPARA A CASA!
Profesores: Equipo MEDIODESIGN* + TOOLINGROUP*
*Official Rhino Trainners. Acreditación otorgada por McNeel, desarrolladores del software Rhinoceros.
Lugar: Mediodesign. Pallars 85-91 5-2 BCN
Duración: 16 / 20 horas
Fecha: sábado 9 / domingo 10 julio de 2011
Horario: de 10h a 14h / de 16h a 20h
Plazas: 20 participantes
REQUISITOS
< Dirigido a estudiantes y profesionales de la arquitectura, diseño y profesiones afines.
< Ordenador portátil.
< Softwares instalados. En el momento de la inscripción, los participantes recibirán las instrucciones para la descarga e instalación de versiones gratuitas (trials) de los softwares.
CONTENIDOS
< Introducción al diseño avanzado y la fabricación digital.
< Entorno Rhinoceros y sus plug-ins.
< Herramientas y estrategias de trabajo CNC.
< Materiales y sus características.
< Planteamiento del ejercicio: diseño de una luminaria
< Desarrollo del archivo de RhinoCam para el mecanizado CNC.
< Mecanizado y post-producción.
< Entrega de propuestas: Presentación en formato digital del proceso de diseño y fabricación (pdf, powerpoint, etc…) y del prototipo de luminaria realizado.
INSCRIPCIONES
Precio: 199 € Materiales incluidos.
Forma de pago: mediante transferencia bancaria.
Límite fecha de inscripción: lunes 4 de julio 2011
Se otorgará certificado de asistencia. …
with Istanbul Technical University, will continue to rediscover verticality through novel generative design techniques and large-scale physical prototypes. Abstracted as a fusion of various sub-systems, each subsystem of the tower will be investigated in relation to their various performance criteria. The correlations between the separate sets of performance criteria and evaluation methods will be analyzed, leading to the generation of unified design alternatives for a vertical system typology. In addition to the custom-made digital design and evaluation tools supporting the core methodology, Vertical Interventions will also highlight the fabrication and assembly of a large scale working prototype integrating the performative characteristics of each system in examination.
As in 2012, the design agendas of AA Athens and AA Istanbul Visiting Schools will directly create feedback on one another, allowing participation in either one or both Programmes.
Discounts
The AA offers several discount options for participants wishing to apply as a group or participants wishing to apply for both AA Istanbul and AA Athens Visiting Schools:
1. Standard application
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting Membership. If you are already a member, the total fee will be reduced automatically by £60 by the online payment system. Fees are non refundable.
2. Group registration
For group applications, there will be a range of discounts depending on the number of people in the group. The discounted fee will be applied to each individual in the group.
Type A. 3-6 people group: £60 (AA Membership fee) + 635*0.75 = £536.25 (25 %) Type B. 6-15 people group: £60 + 635*0.70 = £504.5 (30%) Type C. more than 15 people group: £60 + 635*0.65 = £472.75 (35%)
3. Participants attending both AA Istanbul and AA Athens | 40% discount
For people wishing to attend both AA Istanbul 2013 and AA Athens 2013, a discount of 40% will be made for each participant. (The participant will pay the £60 membership fee only once.)
£60 (AA Membership fee) + (635*0.60)*2 = £822
For more information in discounts, please visit:
http://ai.aaschool.ac.uk/istanbul/portfolio/discounts-2013/
Applications
The deadline for applications is 21 March 2013. A portfolio or CV is not required, only the online application form and payment. The online application can be reached from:
http://www.aaschool.ac.uk/STUDY/VISITING/istanbul…
Added by elif erdine at 11:41am on December 13, 2012
and 3d rapid prototyping using state of the art material simulation and optimisation. Participants will be guided through methods of advanced structural analysis and evolutionary algorithms implemented in Grasshopper, Karamba and Octopus in a 5 day workshop taught by Robert Vierlinger and Matthew Tam within the premises of the Academy of Fine Arts & Design in Bratislava, Slovakia. The workshop will cover the basics of setting up a karamba definition and more advanced form finding techniques with beams and shells through to preparing files for 3d printing and 2d documentation. For the Grasshopper newcomers there is a preparatory crash course on 20 July 2015 taught by Ján Pernecký. The workshop will be held entirely in English. VENUE Academy of Fine Arts and Design in Bratislava: VŠVU / AFAD, Hviezdoslavovo námestie 18, Bratislava, Slovakia ROOM 135 PRICING Early bird Student (until Jun 30, 2015) €320 Early bird Professional (until Jun 30, 2015) €380 Regular Student (from Jun 30, 2015) €400 Regular Professional (from Jun 30, 2015) €475 The fee covers only the tuition. Travel expenses, accommodation and food is to be covered by the participants. SCHEDULE Day 1 Lecture - Karamba in Projects from Competition to Construction Introduction to karamba - Setting up a basic karamba model Shells & Beams - Understanding the impact of load on geometries. Beams - Cross Section Optimization, Load Path Emergence Day 2 Extraction and Visualization of data from Karamba Complex Geometry - Processing of Free Forms for Karamba Force Flow - Understanding and Visualizing results on shells 3d Printing - Preparing geometries for rapid prototyping Day 3 Lecture - Form Finding in Karamba Isler Shells - Hanging Forms with karamba Shells - Shape Optimisation with Galapagos Trusses - Topology Optimization with Galapagos Columns - Positioning with Galapagos Multiobjective optimisation strategies with Octopus Day 4 Frequency Analysis & Non-Linear Analysis with Karamba Extraction and Visualization Part 2 BIS - Building Information Systems with karamba Day 5 Participant’s Examples and Topics Reviewing 3d Print Studies Large Complex Models Reviewing learn techniques and strategies Concluding lecture - public PARTNERS rese arch Academy of fine arts and design…
etric/parəˈmɛtrɪk/adjectiverelating to or expressed in terms of a parameter or parameters.art/ɑːt/nounthe expression or application of human creative skill and imagination, typically in a visual form such as painting or sculpture, producing works to be appreciated primarily for their beauty or emotional power.// Summer School 2017 3 day intensive workshop for design students & professionals will delve into computational & parametric methods (using Rhino3D & Grasshopper3D) to create data-driven art installations, physically manifested into a space through hands-on fabrication & assembly.The experimental studio will run across 2 cities in India (New Delhi & Mumbai) and investigate the agenda of ‘filling the void’ at art installation scale, through the use of computation and parametric methods. Studio is designed as a 3-day event in both cities comprising of technical tutorials, teaching sessions, prototyping & presentations culminating in a symposium / round-table conference / open discussion with leading / emerging professionals that demonstrate computation, parametric design or alternative techniques in their work / practice / academia. // Cities & Dates*New Delhi – 30th June to 2nd July 2017 (Friday to Sunday)Mumbai – 7th July to 9th July 2017 (Friday to Sunday)//VENUE: DELHI: Startup Tunnel, Vihara Innovation CampusD-57, 100 Feet Rd, Pocket D, Dr Ambedkar Colony, Chhattarpur, New Delhi - 110074MUMBAI: Raffles Design International, MumbaiHi Life, 2nd Floor, Phirozshah Mehta Road,Santacruz (W). Mumbai – 400054// Registration DatesAll Registrations End 4 days prior to workshop start date (Or till seats last)// About rat[LAB] EDUCATIONrat[LAB] EDUCATION is an initiative by rat[LAB]-Research in Architecture & Technology (www.rat-lab.org) to start a new discourse in architecture & parallel design disciplines with the use of ‘computational design’ & it’s various subsets. Spread across various cities / countries, we are establishing a global dialogue in the domain of computational design by actively organizing and participating in workshops, lectures, presentations & symposia. While rat[LAB] has taken a top-down approach of exploring computational design through industry, a parallel, bottom-up approach is also in-line to involve students of all levels, from design & related backgrounds.…
ails.
Some word about the mesh... (see Image_01)
I took a flat 4 points NURBS surface as imput (very easy, it defines the total area of my pavilion) and some points (that defines the contact with the ground).
Then I extracted a grid of points from the NURBS (Surface_Util_Divide surface) and compared 'em with the contol points, in order to associate to each grid's point its own attractor (Vector_Point_Closest Point).
Than I moved the points down. I used the distance from each point to its attractor (inverted) as amplitude for the vector of the movement, in order to say: the nearer you are to the control point, the more intense your movement will be. During this operation I've passed the distances' data list into a graph mapper (Params_Special_Graph Mapper), in order to regulate in a very intuitive and interactive way the shaping of my canopy.
At the end of the process I asked GH for a simple Delaunay mesh (Mesh_Triangulation_Delaunay Mesh). It's a very cool command, I believe!!!
Ok, now some word about the component, it's design and it's repetition/adaptation to the mesh...
(see Image_02)
I took the mesh and extracted components on first and faces's information on second. Then I selected and separated the vertexes (1°, 2°, 3°) of each triangular face into threee well defined list.
Then I re-created the triangles' edges. Please pay attention because it's not the same if you use output information from Delaunay components, because here we need a justapposition of edges where triangles touches each others.
After this work I joined the edges and found their centroid. At the same time I found the mid point of each edge.
Now the component... (see Image_03)
It' a little bit longer to describe: I'll try to be synthetic.
Substantially it is a loft from a curve to a point, repeated three times for each triangle (Surface_Freeform_Extrude Point). The point is an elevation of the centroid of the triangle (you can choose if the exstrusion has a single height or it's related to an attractor. In my case it was fixed). The curve is combination of things. There's an arch, which starts on the edge (there's an offset from the corner) end terminates on the same edge (on the other side, obviously). While it's generation the arch passes through a third point which belong to another segment. This last connects the mid point of the original edge (base triangle) with the centroid. The result is a kind of polyline, with two segments and an arch. If you go back to the image of the component that I posted probably you'll understand what I'm saying better than with the definition.
The posit…
ou mean by 'Activate Direct Rhino Modifying'. Perhaps you could expand?
I like the idea of mixing and matching script and 'direct' modeling. There seems to be a lot of potential platforms for this:
1. Implict History: Is there a way for GH to read the direct modifications (with History activated) and translate this as a component (or cluster of components?)? IH seems to record the UI events and the associated elements. GH would need to write as well as read the IH info, in order to preserve as much flexibility downstream as possible. You mentioned Houdini. H seems to record all 'implicit' or direct mods, done via the CAD mouse-based UI, in its network graph. Maybe, this should be captured in the IH cluster/component mentioned above.
2. RhinoParametrics: RP has done a lot of work to intercept and translate Rhino commands into its version of Implicit History. Seems to be centred on points, which makes sense as so much of the traditional 'dumb' way of inputing CAD info is based on mouse clicks on screen (points) predicated by commands, active locks, workplanes etc.
3. Gumball: Rubberduck's use of the new Gumball tool to capture 'direct' modeling inputs thru the Gumball points to a good source for capturing this kind or input, that is related to the 'macro recorder' approach taken by RP and IH.
4. The new Geom Cache component seems to be able to preserve a lot of info about the baked object. There may be even a way to read tagged info generated both GH baked with the "reference" object, and external to GH (by IH, the gumball or even third party apps like RP).
Would be interesting to know what kind of info is 'preserved'. Houdini seems to have a pretty consistent approach to geometric data, that seems to allow parallel NURBS/subD/mesh versions of the geometry. It also seems to have a coherent heirarchical approach to vertices/edges/loops/faces etc that allows the subelements to be arbitarily grouped for 'direct' modeling, and still be part of a procedural script.
I guess the polygon / mesh approach to geometry lends itself to this. If all the procedural commands/components all understand mesh geometry in either vertex, edge, face format, then combining direct and script modeling is doable in transparent way?
In your example above, the Geo Cache node 'flattens' the object to dumb geometry which is manipulated using Rhino, then used as a Reference object, in the next section of the graph. I guess there is nothing to stop the follow on components reading the precedenting graph for parameters, for additional intelligence?
Does GH 'get' or 'put' parameter data?
…