you may know, PCS (from now I will call polar coordinate system with PCS, and cartesian one with CCS) describes point position with 2 values (like x and y in CCS) which are r and theta(r,theta). r is for distance from PCS center, theta is angular dimension which is in 0 to 360 or 0 to 2*pi domain.
To hark back to David's guide line - here it is replaced with guide circle.
Why to sort points like this ? As usual, one image tells more...
Here is logic behind all this stuff :
Find an average point of all given points*
Search for furthest point from an average point*
Create a circle with center at average point and radius = distance from average point to furthest point*
*Steps 1-3 can be replaced with custom hand-made circle, I decided to automate it that way.
For each point find closest point on circle - this will be used for finding theta value
For each point find distance to average point - this is r value
To overcome problem with same theta (t) values (like same x values in CCS), instead of multiplying by 1000, we will use a new create set component. This component creates set of integers, each one representing one unique input value. So if points A, B, C, D, E are (r,theta) :
A (1, 30)
B (2, 30)
C (3, 30)
D (1, 45)
E (1, 60)
Then create set will output list of integers = 0,0,0,1,2 (same theta for A, B, C other theta for D and E). Now its getting really easy - remap r values to domain 0 to 0.5 (or any less then 1), and add integers from create set component to remapped r values.
7. So what we have now is list of floating point numbers : A=0, B=0.25, C=0.5, D=1, E=2
Profit of remapping is that r values will never affect integers representing theta values - and all the information is stored in one floating point number ! By sorting these values we will obtain proper order of points - to complete this, we need to sort points parallel with values.
What's really cool about polar sorting - there could be any amount of points, but polyline connecting all of them will never self-intersect. Probably there is some relation with 2d convex hull.…
- nickname is rather the best approach - and not on active group, but that's irrelevant anyway).
Step back (assuming that you are talking about the "Tens_from_random_blah_blah" definition):
1. Engineering is the art of demystifying (or we are promising that anyway, he he). This means that you start defining (better: outlining) some topology for things based on some "generic" rules (like the ones applied for the masts,cables,cones etc etc). These things are kept in some kind of structure (Lists, DataTrees etc). Things are few in 99.99999% of cases (i.e. : even the biggest membrane "module" has, say, 20-50 masts per "module").
2. Then ... handling things "individually" (mostly modifying) becomes the most critical part. See this (an x "possible" solution by combining a myriad of "options" : a no cones membrane solution, in plain English):
3. But the above is impossible (for more than obvious reasons). You should deploy masts in some high/low sequence in order to achieve some meaningful convex/concave formation that could work.
4. This "works" : 5. This doesn't:
6. This works partially (the formation at the back is "flat" == undo able):
7. This is utterly kitsch (and faulty as the case6 - the back portion):
So it's quite obvious that without a (quite complex) capability to individually control things (in this occasion : mast heights) the whole definition is a waste of computer time. Additionally the more the solution is "demystified" (some curve is defined, some random points are created, some masts are in place, some cables appear etc etc) the more additional constrains are required in order to "narrow" the possibilities (In plain English : sliders should control other sliders as regards their min/max values, true/false, you/me etc etc).
Remember that we are talking about ONE (mast height) out of a myriad things that you should control "manually" (it's utterly pointless to mastermind some kind of "generic" rules - or use naive attractors etc etc) .You'll see the difference when I'll completely reform the definition by adding individual control upon anything.
PS: what about the blocks? (the real life stuff that actually make any solution possible). Can you imagine a 2nd set of "restrictions" imposed by "a child to his parent"? (Assembly/Component modeling , that is).
more soon
…
uick answers. Below you will find some suggestions, but don't think of them as rules and especially don't think of them as guarantees.
1. Choose a descriptive title for your post
Don't call your question "Help!" or "I have a problem" or "Deadline tonight!", but actually describe the problem you are having.
2. Be succinct but clear in your wording
People need to know some details about your problem in order to understand what sort of answers would satisfy you, but nobody cares about how angry your boss or how bad your teacher or how tight your deadline is. Talk about the problem and only the problem. If you don't speak English well, you should probably post in your native language as well as providing a Google Translation of your question.
3. Attach minimal versions of all the relevant files
If you have a GH/GHX file you have a question about, attach it to the post. Don't expect that people will recreate a file based on a screen-shot because that's a lot of pointless work. It's also a good idea to remove everything non-essential from a GH file. You can use the 'Internalise Data' menu option to cut everything to the left of a parameter:
If you're importing curves or Breps or meshes from Rhino, you can also internalise them so you won't have to post a 3DM file as well as a GH file. If you do attach large files, consider zipping them first. Do not use RAR, Ning doesn't handle it.
It is especially a good idea to post files that don't require any non-standard components if at all possible. Not everyone has Kangaroo or Hoopsnake or Geco installed so if your file relies on those components, it might not open correctly elsewhere.
4. Include a detailed image of the GH file if it makes sense
If your question is about a specific (group of) components, consider adding a screenshot of the file in the text of the post. You can use the Ctrl+Shift+Q feature in Grasshopper to quickly create nice screenshots with focus rectangles such as this:
5. Include links to online resources if possible
If you have a question about Schwarz Minimal surfaces, please link to a website which talks about these.
6. Create new topics rather than continuing old ones
It's usually better to start a fresh question, even if there's already a discussion that kinda sorta tangentially touches upon the same issue. Please link to that discussion, but start anew.
7. This is not a 'do my work for me' group
Many of us like to help, but it's good to see effort on our part being matched by effort on your part. Questions in the form of 'I need to do X but cannot be bothered to try and learn the software' will (and should) go unanswered.
7b. Similarly, questions in the form of 'How do I quickly recreate this facade that took a team of skilled professionals four months to figure out?' have a very low success rate.
--
David Rutten
Lead Grasshopper Development
Robert McNeel & Associates…
Added by David Rutten at 12:58pm on October 1, 2013
2: https://vimeo.com/107502226
------------------------------------------------------------------------------------------------
Hi all,
1. Chris, Chien Si and I will present Ladybug and Honeybee at IBSA-USA NYC this Thursday (August 21st). The presentation will include some of the latest developments that we are working on. If you are interested to know more about some of the new developments and see some of the workflows and you are around New York then just stop by. If can't attend in person you can still watch the presentation online. Check the links below. (Make sure to register by Wednesday if you are attending in person.)
2. We would like to show some of the works that you have done with Honeybee and Ladybug during the presentation so if there is anything that you think is interesting and can be presented publicly send it to us at thisisladybug@gmail.com or just post it here. Make sure to let us know who do you want us to credit the image.
3. That's it for now. I copy the information about the presentation below and hope to see some of you there. Thanks for your help and support.
Cheers,
Mostapha
IBPSA-USA New York Regional Chapter presents:
Parametric Modeling Tools | Ladybug and Honeybee
Location: Thornton Tomasetti, 44 East 27th street (between Madison and Park)
Date & Time: Thursday, August 21, 2014 - 6:00-7:30 PM.
6:00-6:30 PM Networking
6:30-7:30 PM Ladybug and Honeybee
Mostapha Sadeghipour Roudsari, Thornton Tomasetti
Chris Mackey, MIT
Chien Si Harriman, Terabuild
7:30-7:45 PM Q & A
Click here to register**: https://attendee.gotowebinar.com/register/6507378565592582402
**Please register at least a day in advance if you wish to attend in person
Descriptions
Ladybug + Honeybee
Ladybug and Honeybee are open source environmental plugins for Grasshopper that help architects and engineers create an environmentally-conscious architectural design.
Ladybug imports standard EnergyPlus Weather files (.EPW) into Grasshopper and provides a variety of 3D interactive graphics to support the decision-making process during the initial stages of design. The plugin also provides further support for designers as they test their initial design options with radiation, sunlight-hour, and shading analyses. Integration with Grasshopper allows for an almost instantaneous feedback and, since the plugin runs within the design environment, the information and analyses are interactive.
Honeybee connects Grasshopper3D to EnergyPlus, Radiance, Daysim and OpenStudio for building energy and daylighting simulation. The Honeybee project intends to make many of the features of these simulation tools available in a parametric way. Just as users have made changes to geometry for years in Grasshopper, now users can parameterize system types, zoning schemes, schedules of operation, daylight sensor placement and controls - all of the “hardcore” simulation parameters that have never been exposed to parametric modeling tools.
https://www.facebook.com/LadyBugforGrasshopper http://www.grasshopper3d.com/group/ladybug
…
ting.
Thanks
Rania
** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.
** Warning ** Version: in IDF="'8.2.7'" not the same as expected="8.2"
** Warning ** ManageSizing: For a zone sizing run, there must be at least 1 Sizing:Zone input object. SimulationControl Zone Sizing option ignored.
** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.
************* Testing Individual Branch Integrity
************* All Branches passed integrity testing
************* Testing Individual Supply Air Path Integrity
************* All Supply Air Paths passed integrity testing
************* Testing Individual Return Air Path Integrity
************* All Return Air Paths passed integrity testing
************* No node connection errors were found.
************* Beginning Simulation
************* Simulation Error Summary *************
** Warning ** The following Report Variables were requested but not generated
** ~~~ ** because IDF did not contain these elements or misspelled variable name -- check .rdd file
************* Key=*, VarName=ZONE IDEAL LOADS SUPPLY AIR TOTAL COOLING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE IDEAL LOADS SUPPLY AIR TOTAL HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL COOLING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=CHILLER ELECTRIC ENERGY, Frequency=Hourly
************* Key=*, VarName=BOILER HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=FAN ELECTRIC ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE IDEAL LOADS SUPPLY AIR LATENT HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE IDEAL LOADS SUPPLY AIR LATENT COOLING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE IDEAL LOADS SUPPLY AIR SENSIBLE HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE IDEAL LOADS SUPPLY AIR SENSIBLE COOLING ENERGY, Frequency=Hourly
************* Key=*, VarName=SYSTEM NODE MASS FLOW RATE, Frequency=Hourly
************* Key=*, VarName=SYSTEM NODE TEMPERATURE, Frequency=Hourly
************* Key=*, VarName=SYSTEM NODE RELATIVE HUMIDITY, Frequency=Hourly
************* There are 3 unused schedules in input.
************* There are 5 unused week schedules in input.
************* There are 13 unused day schedules in input.
************* Use Output:Diagnostics,DisplayUnusedSchedules; to see them.
*************
************* ===== Recurring Surface Error Summary =====
************* The following surface error messages occurred.
*************
************* Base Surface does not surround subsurface errors occuring...
************* Check that the GlobalGeometryRules object is expressing the proper starting corner and direction [CounterClockwise/Clockwise]
*************
** Warning ** Base surface does not surround subsurface (CHKSBS), Overlap Status=No-Overlap
** ~~~ ** The base surround errors occurred 1 times.
** ~~~ ** Surface "839A5ADACCE44BC0AF00_GLZP_31" misses SubSurface "839A5ADACCE44BC0AF00_GLZP_31_GLZ_31"
** Warning ** Base surface does not surround subsurface (CHKSBS), Overlap Status=Partial-Overlap
** ~~~ ** The base surround errors occurred 1 times.
** ~~~ ** Surface "839A5ADACCE44BC0AF00_GLZP_34" overlaps SubSurface "839A5ADACCE44BC0AF00_GLZP_34_GLZ_34"
*************
** ~~~ ** The base surround errors occurred 2 times (total).
*************
************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
************* EnergyPlus Sizing Error Summary. During Sizing: 2 Warning; 0 Severe Errors.
************* EnergyPlus Completed Successfully-- 7 Warning; 0 Severe Errors; Elapsed Time=00hr 07min 35.94sec…
will work slightly different from before. Sorry about breaking this, but it proved impossible to improve the selection logic with the fairly ambiguous notation that was implemented already.
Not every change is breaking though and I hope that most simple matching rules will work as before. There will be a McNeel webinar on Wednesday the 6th of November where I discuss the new selection rules (as well as path mapping syntax and relative offsets within one or more data trees). This will be a pretty hard-core webinar aimed at expert users. The event will be recorded so you can always go and watch it later. I figured I'd briefly explain the new selection rules on Ning before I release the update though.
-------------------------------------------------------------------------------
Imagine we have the following data tree, containing a bunch of textual characters:
{0;0} = [a,e,i,o,u,y] {0;1} = [ä,ë,ê,ï,î,ö,ô,õ,ü,û,ÿ,ý] {1;0} = [b,c,d,f,g,h,j,k,l,m,n,p,q,r,s,t,v,w,x,z] {1;1} = [ç,ĉ,č,ĝ,ř,š,ş,ž]
There are a total of four branches {0;0}, {0;1}, {1;0} and {1;1}. The first branch contains all the vowels that are part of the standard English alphabet. The second branch contains all non-standard vowels and branches three and four contain the standard and non-standard consonants respectively.
So what if we want to select from this tree only the standard vowels? Basically include everything in the first branch and disregard everything else. We can use the [Tree Split] component with a selection rule to achieve this:
{0;0}
This selection rule hard-codes the number zero in both tree path locations. It doesn't define an item index rule, so all items in {0;0} will be selected.
If we want all the vowels (both standard and non-standard), then we have several options:
{0;?} = select all branches that start with 0
{0;(0,1)} = select all branches that start with 0 and end in either 0 or 1
{0;(0 to 1)} = ......................................... and end in the range 0 to 1.
Conversely, selecting all standard vowels and consonants while disregarding all non-standard character can be achieved with rules as follows:
{?;0}
{(0,1);0}
{(0 to 1);0}
It is also possible to select items from each branch in addition to limiting the selection to specific branches. In this case another rule stated in square brackets needs to be appended:
{0;?}[0 to 2]
The above rule will select the first three vowels from the standard and the non-standard lists.
Basically, rules work in a very consistent way, but there are some syntax conventions you need to know. The first thing to realize is that every individual piece of data in a data-tree can be uniquely and unambiguously identified by a collection of integers. One integer describes its index within the branch and the others are used to identify the branch within the tree. As a result a rule for selection items always looks the same:
{A;B;C;...;Z}[i] where A, B, C, Z and i represent rules.
It's very similar to the Path Mapper syntax except it uses square brackets instead of parenthesis for the index (the Path Mapper will follow suit soon, but that won't be a breaking change). You always have to define the path selector rule in between curly brackets. You can supply any number of rules as long as you separate them with semi-colons.
The index rule is optional, but -when provided- it has to be encased in square brackets after the path selection rule(s).
The following rule notations are allowed:
* Any number of integers in a path
? Any single integer
6 Any specific integer
!6 Anything except a specific integer
(2,6,7) Any one of the specific integers in this group.
!(2,6,7) Anything except one of the integers in this group.
(2 to 20) Any integer in this range (including both 2 and 20).
!(2 to 20) Any integer outside this range.
(0,2,...) Any integer part of this infinite sequence. Sequences have to be at least two integers long, and every subsequent integer has to be bigger than the previous one (sorry, that may be a temporary limitation, don't know yet).
(0,2,...,48) Any integer part of this finite sequence. You can optionally provide a single sequence limit after the three dots.
!(3,5,...) Any integer not part of this infinite sequence. The sequence doesn't extend to the left, only towards the right. So this rule would select the numbers 0, 1, 2, 4, 6, 8, 10, 12 and all remaining even numbers.
!(7,10,21,...,425) Any integer not part of this finite sequence.
Furthermore, it is possible to combine two or more rules using the boolean and/or operators. If you want to select the first five items in every list of a datatree and also the items 7, 12 and 42, then the selection rule would look as follows:
{*}[(0 to 4) or (6,11,41)]
The asterisk allows you to include all branches, no matter what their paths looks like.
It is at present not possible to use the parenthesis to define rule precedence, rules are always evaluated from left to right. It is at present also not possible to use negative integers to identify items from the end of a list.
If you want to know more, join the Webinar on Wednesday!
--
David Rutten
david@mcneel.com
Seattle, WA…
Added by David Rutten at 8:57pm on November 3, 2013
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…
curve or locus] of a segment AB, in English. The set of all the points from which a segment, AB, is seen under a fixed given angle.
When you construct l'arc capable —by using compass— you obviously need to find the centre of this arc. This can be easily done in GH in many ways by using some trigonometry (e.g. see previous —great— solutions). Whole circles instead of arcs provide supplementary isoptics —β-isoptic and (180º-β)-isoptic—. Coherent normals let you work in any plane.
Or you could just construct β-isoptics of AB by using tangent at A (or B). I mean [Arc SED] component.
If you want the true β-isoptic —the set of all the points— you should use {+β, -β} degrees (2 sides; 2 solutions; 2 arcs), but slider in [-180, +180] degrees provides full range of signed solutions. Orthoptic is provided by ±90º. Notice that ±180º isoptic is just AB segment itself, and 0º isoptic should be the segment outside AB —(-∞, A] U [B, +∞)—. [Radians] component is avoidable.
More compact versions can be achieved by using [F3] component. You can choose among different expressions the one you like the most as long as performs counter clockwise rotation of vector AB, by 180-β degrees, around A; or equivalent. [Panel] is totally avoidable.
Solutions in XY plane —projection; z = 0—, no matter A or B, are easy too. Just be sure about the curve you want to find the intersection with —Curve; your wall— being contained in XY plane.
A few self-explanatory examples showing features.
1 & 5 1st ver. (Supplementary isoptics) (ArcCapableTrigNormals_def_Bel.png)
2 & 6 2nd ver. (SED) (ArcCapableSED_def_Bel.png)
3 & 7 3rd ver. (SED + F3) (ArcCapableSEDF3_def_Bel.png)
4 & 8 4th ver. (SED + F3, Projection) (ArcCapableSEDProjInt_def_Bel.png)
If you want to be compact, 7 could be your best choice. If you prefer orientation robustness, 5. Etcetera.
I hope these versions will help you to compact/visualize; let me know any feedback.
Calculate where 2 points [A & B] meet at a specific angle is just find the geometrical locus called arco capaz in Spanish, arc capable in French (l'isoptique d'un segment de droite) or isoptic [curve or locus]
of a segment AB, in English. The set of all the points from which a segment,
AB, is seen under a fixed given angle.…
eration!
See an example work flow for designing, simulating and analysing a Photovoltaic system below.
Download a Grasshopper and Rhino example file:
https://www.dropbox.com/s/krbszlplj5i40dz/017_HBgeneration%20Rhino%20model.3dm?dl=0
https://www.dropbox.com/s/lxneuzal3mipd2q/017_HBgeneration.gh?dl=0
See a quick introduction and tutorial videos here: https://www.youtube.com/playlist?list=PLrx2KnyhaJ5YXo5hpk8Q9q4Vy99O5IegK
1. Select a building to mount a photovoltaic generator on (seen in Rhino in green).
2. Select a surface within that building to mount a photovoltaic generator on (seen in Rhino in green).
3. Create a Honeybee context surface from that surface.
4. Place a photovoltaic generator on that Honeybee context surface by using the Honeybee generation component. Honeybee_Generator_PV and connecting the context surface to it's input _HBSurfaces. Then you can specify both the performance and the financial data of the photovoltaic generator.
5. Create a Honeybee generation system which consists of the photovoltaic generator in 4. By using the component Honeybee_generationsystem and connecting 4 to its input PVHBSurfaces_. Then you can specify the annual maintenance cost of this system.
6. Run the simulation in Energy Plus by connecting 5. to the input HBGenerators_.
7. Read the results of the simulation:
- The electricity produced by the Honeybee generation system in 5.
- The net purchased electricity of the facility (the Honeybee zone) to which the Honeybee generation system is attached to. This is the electricity consumed by the facility less the electricity generated by the Honeybee generation system.
- The financial costs of the Honeybee generation system; capital, maintenance and replacement costs.
8. Calculate the net present cost of the Honeybee generation system in 5 assuming a 25 year lifetime.
9. Visualise the net present cost.
…