e to constrains, I HAVE to do it like this (I can't 3D print everything or opposite).
First
I have no idea how to make the panels, without so many duplicate Edges, Faces etc.
Second
I can't figure out how to align the triangle panels to fit in the construction, so it can be assembled ideally without glue. This problem is both conceptual (I can't figure out how to do it fiscally) and grasshoper-wise - I don't know how to organize data list and produce a global movement, so that the triangle parts do not intersect with each other, BUT intersect the 3d printed construction part (where they fit fix in or just fit and can be glued).
Triangles will be milled out from 3mm Plexiglas, BUT I will not have an option to mill at an angle, so only 90° edges.
3D printed parts will be executed by a high level production powder printer, so it should hold good.
Any ideas?
best,
cuki
…
File) 2. I have designed a curved Trichordal-Truss from one curve in Rhino.
The Truss is lying in the XY direction and the footer is placed on the zero point.
3. And now my problem:
I want to put the Truss-object on the feet, move 90°
(from the XY axis to Z axis, see sketch 1).
4. Then copy / move the truss to all 36-points of ellipse (see sketch 1).
5. Align the 36 trusses with the center of the triangle .
pointing at the center of the ellipse (see sketch 2).
6. Using a slider to change the position of the 36-Trusses at der ellipse.
Variable distance between Truss and ellipse (see sketch 3).
Thanks for you Answer.
Best regards
Noureddine…
multiply of variants from Galapagos, to have a chance for better analysis and comparability after. I also would like to use more then one solution in my design after.
In old topics i found kind of 3 solutions.
1.Change Galapagos to octopus ( what don t really want to do, i am kind of happy with Galapagos)
2. Use Slingshot! and MySQL Database ( it s look a little bit too complicated from the first view)
3. Use Colibri and Design Explorer Platform (looks kind of pretty way to solve my problem)
So i tried to add Colibri components to my definition , but have some mistake in the Colibri Aggregator after adding the Genome "An item with the same key already been added". I think it comes because for some steps i am using the "Gen Pool" and not a normal slider. Is it a way to connect Gen Pool and Colibri (i really prefer to have it, then a lot of sliders in some cases)?
And the second question (if i will get it solved with gen pool), could i somehow controll the recording process? For example i would likte to record only variants wit fitness over 90% or start recording just after 20. generation and record till the end?
I also opend for all other possibilities to reach the same goal (record/save/bake multiply variants from galapagos)
…
try to get the output. In this case the output needs to be set before requesting for it. I am doing it with this call:
ret = gsaobj.Output_Init_Arr(1,"Global","A1",14003001,3)
In API help the call is documented like this:
short Output_Init_Arr (long iFlags, string sAxis, string sCase, enum ResHeader header, long num1dpos)
so this call has 5 arguments (long, string, string, long, long) (the enums are defined as longs)
This call works, because when I print the ret, i get 0 that is "succeded" so everything works so far.
Then I request the output with the following:
results = []
ret = gsaobj.Output_Extract_Arr(10,results,numcomponents)
In API help the call is documented like this:
short Output_Extract_Arr(long iRef, SAFEARRAY(struct GsaResults)*arrayResults, long* numComponents)
I am getting the error "
Runtime error (ArgumentException): Could not convert argument 1 for call to Output_Extract_Arr."
So it seems that is not accepting 10 as a long in the beginning (assuming that argument 1 is the first). I already tried passing a variable as long, using long(10) there, nothing works.
Furthermore I don't know if the other two variables are correct like that. I come from VBA where I need to declare everything but AFAIK python is more permissive in this sense. "results" should be a dynamic array of objects and "numcomponents" a long.
Any help would be appreciated!
Thanks! :)
…
eventually found out about genetic algorithms on which I found extensive researches, projects,... ! I looked into it and ended up on a few papers which I believe are the jumpstart for my master thesis.
"Galapagos; on the logic and limitations of generic solvers" by David RuttenArticle in Architectural Design 83(2) March 2013
"Black-box optimisation methods for architectural design" by Thomas Wortmann and Giacomo NanniciniConference Paper: CAADRIA 2016, At Melbourne, AU, Volume: 177-186
So I started looking into alternatives to genetic algorithms in architectural design.So far, I've ended up on :
Thomas Wortmann's work with the surrogate(or model) based optimization approach!You can check out the tool he developped for GH (Opossum):http://www.food4rhino.com/app/opossum-optimization-solver-surrogate-models
Judyta Cichocka's work, specially with the Swarm approachYou can check out the tool she developped for GH (Silvereye):http://www.food4rhino.com/app/silvereye-pso-based-solver
And that's it !!! I've been researching through article references (mainly on "researchgate") but I'm now stuck in a loop of references I already visited!That probably means the litterature on the subject is not (yet) extended but I might probably be missing something.The keywords make it difficult to search : "optimisation", "algorithms", "architecture", send me most of the time to computational engineering and deep mathematics papers I unfortunately do not have the background knowledge to comprehend ! So there it is ! If you have any clue of where (or how ! ) I should be looking, please tell me :)I know Mr Rutten is pretty active on the forum so hopefully... (fingers crossed :p) !Also if you have any good tips for getting into algorithms in general (you think could help), I'd be glad to hear(read) it ! A book, tutorials maybe ?!So, autors, architects, projects books, articles, conferences I should go to,specialized architecture offices/studios (I'm also looking for an internship so ...).If you know about a more appropriate forum please let me know !If you want to get deeper into this, you can contact me at :
e1635331@student.tuwien.ac.at
tdissaux@student.ulg.ac.be
My master thesis is due for may 2018 but I have a paper to write for January 2018 in order to be elligible for a PHD program afterwards.What I mean by that is that if you read this message in 6 month, I'll still be open to discussion !
I am right now an erasmus student at TUWien (Vienna) but my main university is The university of Liège in Belgium.I can handle French, English, Italian litterature and eventually Dutch if really you think it's worth it ! I have access to most online libraries via my university's portals so access shouldn't be an issue !I'm very excited to hear from you I wish you all a great day,Cheers,Thomas
…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
r "virtual partitions" as follows:
What I mean "air walls" here, is derived from the description of the E+ documentation with the header of "Air wall, Open air connection between zones". (Page 17, http://apps1.eere.energy.gov/buildings/energyplus/pdfs/tips_and_tricks_using_energyplus.pdf)
As I understand, the term "air wall" used in E+ here refers to a description of something like "boundary condition" between adjacent interzone heat transfer surfaces, but not a kind of "construction or material" (like air space resistance or air gaps within a wall/double glazing window).
The main purpose of introducing the "air wall", is to simulate or approximate the airflow/convection/natural ventilation effect between multiple thermal zones which are connected by a large opening.
In my previous tests, using HBzones and GB, I managed to create the gbXML file which can be successfully imported to DB (without assigning any constructions within HB). And the adjacency condition can be recognized automatically by DB, even when I did not use the "Solve adjacencies" component in HB - shared surfaces between multiple thermal zones are recognized automatically by BD as "internal - partition"(which are standard partitions, but not virtual partitions).
In order to create/approximate "virtual partition", I need to manually draw a "hole" in the standard partition surface (fig.1&2). Again, the reason why we want to use "virtual partitions"(or "air wall") is that it allows airflow between multiple thermal zones which are connected by large openings and we could get different temperature of the each subdivided thermal zone which compose a large thermal zone.
My question is, if there is a possible way to simulate/approximate this kind of "virtual partitions"(or "air wall") in HBzones or in GB? If so, I would like to test if DB recognizes it or not. Actually, we expect that there is no need to involve any manual operations (like drawing a "hole" in the standard partition surface) in DB, due to an automatic optimization loop.
Thank you!
Best,
Ding
fig.1
fig.2
…
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…
We invite participants of the eCAADe 2015 conference to propose workshops on their current research. The workshops will be held on the 14th an the 15th of September…
unity in Ukraine, which is orientated to contemporary architecture.
The results of CANactions will be published in ACC magazine (link), on the web-sites of “Architectural club” (link), AB "ZOTOV&CO" (www.zotov.com.ua),
Theme
Theme of CANactions 2009 is emergent design techniques.
This theme could include following architectural branches as Digital design, sustainable architecture and other sectors, which by the participants’ opinions, could be EMERGENT.???
Any architectural projects made earlier of specially for the CANactions’09 are allowed for submission.
Presentation
All the projects will be submitted in two phases:
Phase 1 – selection of 10-15 participants of CANactions.
Project has to be sent by e-mail to: (__) in PDF (not less then 300 dpi, not more then 10 Mb).
Phase 2 –the CANactions participants prepare 15-20 min presentation of their projects (screen projector, microphone) and materials for the exhibition in House of Architect, Kyiv. The project has to be presented by author. -> exhibition is the first architecture biennale
Presentation requirements: file should be composed in PDF format on A0 sheets, placed horizontal (not more then 1 sheets). This file should contain sufficient amount of the presentation graphic material, including text explanation up to 300 words.
The raster images should have printing definition not less then 300 dpi. It’s recommended to avoid solid black fillings, because the projects will be printed on ink-jet printer.
The presentation requirements could be changed after phase 1 results.
The presentation materials should be made in Ukrainian (or Russian) and English. Verbal part can be presented in any language.
Tarek Naga, Naga Studio, Los Angeles / USA (I can contact him - he will do it for free)
Awards
DIA (Dessau Institute of Architecture), Germany gives a prize: certificate for the education for 1 (2) semesters of Master-program in DIA for students and young architects (up to 30 years) from Ukraine. The decision about the prize winners will be made by selection board.
Guests presentations
- Daniel da Rocha DIA /Germany/ (flights, accommodation?). Theme: (scripting???)
- Aleksandr Kalachev DIA /Riussian Federation/, Tudor Cosmatu DIA /Romania/, Irina Bogdan DIA /Romania/ - "Parametrically Defined Urban Patterns".
- Grygorii Zotov DIA /Ukraine/ - “The Multicultural Columbarium”.
- Armen Menendian /USA/ - "Blending Parametric Methods With Traditional Design:
"The Danish Pavilion at Shanghai EXPO 2010".
Exhibitions
1. Projects of 10 (15) CANactions participants
2. other projects: Zotov+Co
Bollinger+Grohmann - structural eng.
the very many
C-Space Pavillon / alvin huang
ala _ amanda levete studio
anOtherArchitect
student work, Charles Walker, AA Unit Pavillon
Event schedule
Phase 1: 01.07.2009 – start of the CANactions 2009 and beginning of projects submission.
16.08.2009 - dead-line of the project submission of phase 1.
Phase 2: 17.08.2009 – announcement of the CANactions 2009 participants.
30.08.2009 – dead-line of submission of the CANactions 2009 exhibition materials.
14-26.09.2009 – exhibition of the CANactions 2009 projects in House of Architect, Kyiv.
25-26.09.2009 – CANactions 2009.
26.09.2009 - finnissage / announcement of competition winners for DIA study
Contacts: canactions2009@gmail.com…
Added by Grisha Zotov at 6:32am on August 10, 2009