r "virtual partitions" as follows:
What I mean "air walls" here, is derived from the description of the E+ documentation with the header of "Air wall, Open air connection between zones". (Page 17, http://apps1.eere.energy.gov/buildings/energyplus/pdfs/tips_and_tricks_using_energyplus.pdf)
As I understand, the term "air wall" used in E+ here refers to a description of something like "boundary condition" between adjacent interzone heat transfer surfaces, but not a kind of "construction or material" (like air space resistance or air gaps within a wall/double glazing window).
The main purpose of introducing the "air wall", is to simulate or approximate the airflow/convection/natural ventilation effect between multiple thermal zones which are connected by a large opening.
In my previous tests, using HBzones and GB, I managed to create the gbXML file which can be successfully imported to DB (without assigning any constructions within HB). And the adjacency condition can be recognized automatically by DB, even when I did not use the "Solve adjacencies" component in HB - shared surfaces between multiple thermal zones are recognized automatically by BD as "internal - partition"(which are standard partitions, but not virtual partitions).
In order to create/approximate "virtual partition", I need to manually draw a "hole" in the standard partition surface (fig.1&2). Again, the reason why we want to use "virtual partitions"(or "air wall") is that it allows airflow between multiple thermal zones which are connected by large openings and we could get different temperature of the each subdivided thermal zone which compose a large thermal zone.
My question is, if there is a possible way to simulate/approximate this kind of "virtual partitions"(or "air wall") in HBzones or in GB? If so, I would like to test if DB recognizes it or not. Actually, we expect that there is no need to involve any manual operations (like drawing a "hole" in the standard partition surface) in DB, due to an automatic optimization loop.
Thank you!
Best,
Ding
fig.1
fig.2
…
50 and reduced the 'cell size' slider to 0.5. When the 'Azimuth' angle is changed to 180 +- 90 (dawn or dusk), the points are widely dispersed, reducing the density and increasing the number of cells in the "sparse grid". Under these conditions, the number of cells was ~2000 and the Profiler time for 'Boundary' went up to a full minute or more each time 'Altitude' or 'Azimuth' was changed.
So I created this code to benchmark some alternatives and found two interesting things:
'Boundary' surface performance (v.1) is not linear. As the number of surfaces goes from 1000 to 2000, the time per surface goes up dramatically.
I tried three alternatives for creating a rectangular surface at a given point that are all substantially faster: v.2, v.3 and v.4. For 2000 points, v.4 is 150 times faster than v.1 !!!
Performance of v.2, v.3 and v.4 are similar and all scale up very well. To benchmark beyond 2000 points, I recommend disabling the VERY SLOW v.1. At 5000 points the 'Pop2D' component takes ~11.3 seconds but v.3 and v.4 take less than one second to generate 5000 surfaces!
See boundary_2015Nov19a.gh attached.
So I replaced the 'Rectangle' and 'Boundary' components in my sun reflection model with v.4 in focus_2015Nov19b.gh (also attached) and the performance is amazing.
I'm sure someone has mentioned this performance issue with 'Boundary' on the forum before but as with many things, I didn't realize what a major obstacle it can be until I discovered this for myself.…
Added by Joseph Oster at 9:16pm on November 19, 2015
grout lines, a tile surface and tile perimeter poly line). I then use that as a Mesh (from Rhino) in the second definition.
2. I can tile out the mesh surface and rotate all the tiles in 90 deg. increments.
To get what I wanted. I took the Mesh and have copied it in series to make a grid. I can then control the dimensions of the grid. X and Y extents. I can also rotate the tiles around their centers.
The spacing of the grid is set from an edge curve of the tile (or mesh). This sets the size of the squares in the grid themselves.
See definition, images and Rhino 4 File, to give the definitions a shot. I have labeled how to use them.
My question -- how can I randomly rotate squares in my grid? I would like the deg of rotation to be random and also which tiles they are.
Also how might I rotate (every other tile) for example? So that I can control the pattern more?
Thoughts?
Thanks!
…
ror when it comes to points on edges of the surface.I guess it is because normal vectors at a few of points are invalid. After all, because of these invalid points, an error message comes out which is saying " Runtime error (PythonException) : Unable to add polyline to document " and it results in no output. Please give me some help if you know how to handle this problem. I post a code below.Thanks in advance.
---------------------------------------------------------------------------------------------
import Rhinoimport rhinoscriptsyntax as rsimport mathimport ghpythonlib.components as gh
output_crvs = []
for pt1 in input_pt :output_pts = []newPt = pt1output_pts.append(newPt)
while len(output_pts) <= 100: newPt = outputpoint(base_srf, newPt, distance_factor) output_pts.append(newPt)
output_crv = rs.AddPolyline(output_pts)output_crvs.append(output_crv)A = output_crvs
def outputpoint(base_srf, input_pt, distance_factor):centre_point = rs.AddPoint(0,0,0)height_point = rs.AddPoint(0,0,10)
zaxis = rs.VectorAdd(centre_point, height_point)
cp_pt = rs.SurfaceClosestPoint(base_srf, input_pt)normal_vector = rs.SurfaceNormal(base_srf, cp_pt)drain_vector = rs.VectorCrossProduct(normal_vector, zaxis)
dvector2 = rs.VectorUnitize(drain_vector)dvector3 = rs.VectorRotate(dvector2, 90, normal_vector)
mpt = gh.DeconstructVector(distance_factor*dvector3)moved_pt = rs.PointAdd(input_pt, mpt)moved_uv = rs.SurfaceClosestPoint(base_srf, moved_pt)output_pt = rs.EvaluateSurface(base_srf, moved_uv[0], moved_uv[1])
return output_pt…
g from a list of 12 items I would find all the combinations taking just 4 at time.
I'd use a Stream gate that takes the indexes of the items and pass them to a list item in order to select just the items of the combination. Doing so I can choose a single combination of index at time to pass to the list item.
In this moment all the data come out from the first gate, all the others are empty.
If I pass these index to the list item it gives me an error (probably because of the data structure).
*long version*
I start from a list of 12 segments, all of them with the starting point in common and the ending point distributed regularly in the space. It's a quite simple starting point.
What I'm trying to achieve is to find all the possible spatial configurations made of 2, 3, 4 segments. I started with 2 segments so I've 12^2=144 possible configurations but just 4 different configurations that can intuitivelly be recognized (60°, 90°, 120°, 180°).
Doing the same with 3 segments generates 12^3=1728 configurations and I don't know how many different ones. With 4 segments I've got 12^4=20736 possible configurations.
As you can imagine many configurations are identical but just with a different orientation so at the end I'll have to parse geometrically the output to delete duplicates (I'll address this later on).
Please could you help me to figure out how to mix these segments in different configurations?
Thank you in advance.…
per bake commands to bake the connected geometry with the corresponding materials.
mxDiff is a simple diffuse material. Only reflectance color for 0° and 90° are exposed.
mxEmit is a basic emitter material. You can set light color, power and efficiacy of the emitter.
mxBasic is the most complex material for now. You can set all the properties of a single layer material including. Use this for transparent materials.
mList is your way if you don't want to create your own materials. This component returns a list of all the materials on the Maxwell scene manager. Make sure this is evaluated after you add your own materials if you want to see them in the list.…
lts.
In the visualization, points is an interesting option. It's a matter of aesthetics I guess, I go with surfaces :) Also what you can try is selecting Filters -> Slice (you can also find it in the icons above the pipeline viewer), in the Slice options below the pipeline press Z normal and on the Z coordinate press some height relevant to the buildings (e.g. 1.75m a typical human scale). That would show you the flow around the buildings on that height. Experiment with selecting other normals and values. Keep playing with the filters there's some cool things in there. Also you can check out the mailing list and extensive paraview documentation.
Concerning the errors I apologize because I just downloaded your case.
It appears that the decomposeParDict is not included in the system folder. I am not sure if this is due to BF not going through the whole workflow yet or an ommission on our side. Please feel free to add it in Github. I will also note it down and pass it to Mostaph to check. In the meantime please find attached a VERY detailed decomposeParDict file. I took the liberty to set it at 4 processors (the numberOfSubDomains value) and also selected (that is uncommented) the scotch decomposition method. It's the easiest method to use since it is automatic and doesn't require any more inputs on how the domain is decomposed on the x,y,z directions (which would require you to change values in the attached file).
Now, the different folders created are simply snapshots of the current solution at the specific timestep. To control how often the solver is saving change the writeInterval number in the controlDict file. You can also change almost all these values on the fly, while OF is running.
Finally, concerning the other errors of parafoam it seems somehow parafoam is reading the intial condition names instead of actual results from the solution files and it doesn't like it.
Does this happen only when you open the case (i.e. at 0 time) or does it also happen when you move to an other timestep?
Also, are you using paraFoam, paraview or the paraFoam -builtin method?
The extension of the paraFoam file seems to be .foam which means you are probably using the built in viewer. That might be the issue but I'm not sure.
Can you try running paraview, navigate to your case folder, open the .foam file and see if there is still an error?
Also, if it isn't much trouble can you zip one of the time folders and attach it here? I'd like to take a look at what's inside to check against what the error report says.
Once again thanks for testing!
Kind regards,
Theodore.…
of the new challenges presented to the society and architecture in Portugal. With technological developments, tools once limited to not creative areas begin to be part of the everyday life of students in University Architecture Laboratories and change its design processes. The architecture design methods are changing rapidly with the introduction of CAD-CAM software’s. In recent years, new software’s have been available for 3D representation and digital fabrication, which have allowed creating new ways of interacting with the computer and architecture. Contemporary architecture in its various scales, seeks greater flexibility, adaptability and interactivity taking into account both the means and goals of kinetic systems. Thus, it is essential to the creative industry players to acquire new knowledge about the latest technological innovations and how they can solve some of the problems and challenges of today’s society.
The workshop will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in all the design process, to simulation and prototype 3D interactive architecture solutions.
The theoretical and practical workshop (64 hours) taught in English and Portuguese, will be composed of two modules: (1) LS_01: Firefly +Grasshopper + Arduino and Scale Model Fabrication; (2) LS_02: Design Studio – Discursive Wall.
This workshop is intended for students and professionals from different areas of knowledge, (architecture, design, fine arts, engineering, music and programming) who are interested in the process of design: from ideation to prototyping. The participants will generate scale models.
Registration is limited to 20 participants with or without software knowledge. Participants will work individually and in group. Participants must take their own laptops to the workshop. Registrants should complete the form by 28 February 2012. Once registered, you will receive an email confirming your acceptance.
Questions or doubts contact us:
alivingsystem@gmail.com
…
Added by Brimet Silva at 7:07pm on January 16, 2012
se enseñan los principios de modelado básico y orgánico en Rhinoceros. En Grasshopper se estudian los principios de Parametrización, panelización y análisis en Grasshopper, así como el proceso de manufactura digital para maquinaria de corte Láser y CNC.
UN solo pago anticipado $5,000.00
Pagos diferidos $5,500.00*
*reserva tu lugar con el 50%
De lunes a viernes de 10 am a 18 pm
Del 23 al 27 de julio de 2012
DURACION: 40 HORAS
SESIONES: 5 DE 8 HORAS
o info@dimensiontallerdigital.com
informes al 55 (50 16 0634) con Mayri Gallegos (o al cel. 55 28 85 24 73)
Incluye material para corte digital.…