being driven by the wii nunchuck... But, here's my issue. I tried it first by having the output from the listener be a 6-digit number... so, I'm using the (CInt(Val(StoredValue))) command and it's writing out 181130... and I can easily split it up selecting the Left(x,3) or Right(x,3)... I first rant that number through a Format("{0:000000}",x) so that even if one of the accx or accy numbers were a 2-digit number (so my overall number would only have 5-digits)... with this Format function... I'm always assured a 6-digit number. And this method works... except...
If the first group of numbers coming in only has 2-digits... So, lets say the accelerometer read out of the first one (accx) is 89. Let's say the accy read out is 119. So, when I run this through the Format function to make it have at least 6 digits, my number now reads 011989. So, if I were to take the first three numbers on the right, my read out would be 989... which is much higher than my expected (60-180 range that is really coming over the Serial Port)... So, I'm back to where I started... in that I need to figure out a better way to split up the data.
Which brings me to your method. I tried it as well... in fact, I added a comma in the serial readout, so the string coming out of the listener reads 89,119. So, I can use your trick to go look for a delimeter and then read to the left and right a certain number of digits... The problem I still have is that the data going into the function is a string, and thus even if I split the 3 digits to the right of the comma out (so, my output says 119)... it's still a string, and my number parameter is still red. In your picture above, was your original 181 130 a number or a string? My guess is that it was understood as a number, because your number parameters at the end are accepting the value. But, in my case... I'm still stuck with the inability to convert a string to a number... Does this make sense? And are their any other workarounds?…
Added by Andy Payne at 9:42am on September 3, 2009
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
izes like 0.6m, 0.8m, 0.9m and 1.2m are the most "common": In cases where mechanical floors are a must (hospitals for instance) a 2.4/2.4 is quite handy (habitable/mechanical per floor). You can try 1.8/2.7 as well (floor/habitable) since 1.8 floor thickness can host HVAC and some decent W truss size. Also 1.6/2.4 (floor/habitable) is used in small buildings. NOTE: see next.
3. Don't forget to include corrugated metal height + concrete screed height + raised floors height: for the latter, say, something like 0.3m (modules + adjustable mounts + free space for electric stuff [boxes etc]).
4. As regards exteriors, Laurent Buzon is a close friend of mine. Contact him directly on my behalf:
http://www.buzonuk.com/
http://www.google.gr/url?sa=t&rct=j&q=&esrc=s&sourc...
5. LBS Structural ability and "monolithic" floor behavior (humans don't like vibrating habitable spaces) ARE not the same animal.…
ybee_EnergyPlus Window Shade Generator" component.
3. SolveAdj component has the input to set BC for interior surfaces.
If you want to set them to adiabatic then you can use setToAdiabatic components.
4. For natural ventilation Chris has provided extensive answers including this one.
If the component doesn't work then you need to download the files manually from github and replace the userObjects with the old ones. You have to do it separately for Ladybug and Honeybee which can be painful. Is there anyway to change the firewall settings?
…
le with you.
I am trying to achieve the minimal path algorithm of Steiners tree in Python using the minimal path algorithm.The syntax would be as followsFirst I need to create a cube of any dimension.
Then I need to specify one origin say point A and destination point say B.
Now for this point A,B I need to create a machine based network which will automatically enroute A to B.
Where the angle will be constant i.e 120, length can be a variable, triangular node(steiners tree)using these constraints it will create a network.
Now, I should iterate the program in such a way that I should specify the further points say like A1 and B1 so on.The program will contain a limit constraint where it will come out of iteration loop and start a new loop,forming the network.
By this I will get a dense network of 120 deg branches.
The branching gets denser the moment I add source and destination points.
There can be 100 iterations to reach from A to B but the algorithm chooses the one following the minimal path.
I would be highly thankful to you if you would please share the python syntax and grasshopper definitionCapture.JPG for the same
Thank you for your time in advance
I would be highly grateful if you help me through
warm regards
Arya
12.gifShortest%20path%20algorithm.gh
min-paths.jpgcc.henn.studyimagesminimalpaths.jpg …
Refinement component at first, possibly using MeshMachine instead which is slow but actually gives many fewer triangles and adaptive meshing for tight curves too. Neither are easy to adjust on a deadline!
Then you have to sneak up on workable settings, using only a few lines, or Grasshopper will freeze perhaps indefinitely for 200 lines with extreme settings, especially the CS (Cube Size) setting that can blow up into a huge number if your scale is big.
Cocoon gives lots of nearly flat split quad faces so I quadrangulated those for fun:
Or MeshMachine can refine the mesh to make it efficient:
Whereas the Cocoon Refine component will merely return an equally fine mesh with more equilateral triangles but no serious remeshing to rid so many tiny triangles where they are not needed? Actually, it does seem to remesh also:
David said he used some of Daniel's MeshMachine code in there.…
rld.wolfram.com/EnnepersMinimalSurface.html
when i type the equations for z,y,z it says a syntax error so i obviously do not understand how to construct an expression. (screen capture attached)
Any help/explanation of using this function would be greatly appreciated
thanks so much
Capture.JPG…
ram.com/Helicoid.html.
To be more precise, I'm not quite clear how to apply this equation to the helicoid and integrate it into my code:
where corresponds to a helicoid and to a catenoid.
I've made some attempts not worth to be shown here. Maybe somebody can help me with a pseudocode or a simple description how to start solving this classic geometric transformation.
Thanks, Sebastian
…
Added by Sebastian at 11:19am on December 27, 2012
try to get the output. In this case the output needs to be set before requesting for it. I am doing it with this call:
ret = gsaobj.Output_Init_Arr(1,"Global","A1",14003001,3)
In API help the call is documented like this:
short Output_Init_Arr (long iFlags, string sAxis, string sCase, enum ResHeader header, long num1dpos)
so this call has 5 arguments (long, string, string, long, long) (the enums are defined as longs)
This call works, because when I print the ret, i get 0 that is "succeded" so everything works so far.
Then I request the output with the following:
results = []
ret = gsaobj.Output_Extract_Arr(10,results,numcomponents)
In API help the call is documented like this:
short Output_Extract_Arr(long iRef, SAFEARRAY(struct GsaResults)*arrayResults, long* numComponents)
I am getting the error "
Runtime error (ArgumentException): Could not convert argument 1 for call to Output_Extract_Arr."
So it seems that is not accepting 10 as a long in the beginning (assuming that argument 1 is the first). I already tried passing a variable as long, using long(10) there, nothing works.
Furthermore I don't know if the other two variables are correct like that. I come from VBA where I need to declare everything but AFAIK python is more permissive in this sense. "results" should be a dynamic array of objects and "numcomponents" a long.
Any help would be appreciated!
Thanks! :)
…