393&xg_source=activity
In this case we see a geometrically approach, which doesn’t works efficient, because it required knowing how they behaviors together before, and I think it is not the ‘really behaves’.
To make the structure ‘really behaves’ I tried use kangaroo and the result works very well! As you can see I simply give the 2-set reverse UForce, and then they start to rotate until they found their equilibrium. That means 90 degree rotation. I was wondering what we can do to make a endless-rotation. I am mean 360 degree or more like this:
https://www.youtube.com/watch?v=4owFczeqqMQ
By the way, I try to give supports which allow a horizontal movement only (Just curious how we could keep the anchor-movement horizontally and in the same layer, for example like usual supports for compression ring…). I use the AnchorXYZ, but Kangaroo-Engine seems don’t accept its output.
So maybe some one knows a better solution?
…
Added by Jon to Kangaroo at 7:40am on March 11, 2014
problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
this common installation problem please find a tested remedy shared by one of the group members:
Comment by Iman Sheikhansari on August 26, 2019 at 8:33amDelete Comment
HiIf you are encountering a problem with rhino 6 versions don't worryFollow these steps.1. Download SYNTACTIC from https://sites.google.com/site/pirouznourian/syntactic-design2. Install it and go to the installation folder, Drag & drop SYNTACTIC(green one) over your grasshopper canvas.3. Close your rhino and reopen it. 4. Type GrasshopperDeveloperSettings5. Tick the Memory load *.GHA assemblies using COFF byte arrays option6. Run grasshopper and enjoy plugin
I hope this helps,
Best regards,
Pirouz
…
lla progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse
___________________________________________________________________________________
luogo:
Sala meeting Holiday Inn Inn Turin C.so Francia Piazza Massaua 21 – TORINO
Scadenza iscrizioni: 25 Novembre 2011 – ore 15.00
___________________________________________________________________________________
info e prenotazioni:
Le Penseur (coordinamento formazione)
info@lepenseur.it
081 564 21 84
347 548 71 78
quote di partecipazione e programma (formato PDF)
ulteriori informazioni sui corsi PLUG > IT
___________________________________________________________________________________
PROGRAMMA DEL CORSO:
GIORNO_01 | 01 Dicembre 2011
10.00 – 10.30: presentazione workshop
10.30 – 11.30: introduzione alla progettazione parametrica: teoria, esempi, casi studio
11.30 – 13.00: Grasshopper: concetti base, logica algoritmica, interfaccia grafica
13.00 – 14.00: break
14.00 – 16.00: nozioni fondamentali: componenti, connessioni, data flow
16.00 – 18.00: esercitazione
GIORNO_02 | 02 Dicembre 2011
10.00 – 12.00: funzioni matematiche e logiche, serie, gestione dei dati
12.00 – 13.00: analisi e definizione di curve e superfici
13.00 – 14.00: break
14.00 – 16.00: analisi e definizione di curve e superfici
16.00 – 18.00: definizione di griglie e pattern
GIORNO_03 | 03 Dicembre 2011
10.00 – 12.00: trasformazioni geometriche, paneling
12.00 – 13.00: image sampler
13.00 – 14.00: break
14.00 – 18.00: data tree: gestione di dati complessi
GIORNO_04 | 04 Dicembre 2011
10.00 – 12.00: digital fabrication: teoria ed esempi
12.00 – 13.00: nesting: scomposizione di oggetti tridimensionali in sezioni e posizionamento su piani di taglio per macchine a controllo numerico CNC
13.00 – 14.00: break
14.00 – 18.00: esercitazione…
hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
of a hack to push it to an android device, and you can't use labels, which is a very bad point!
...
I won't buy an Iphone!
The other is Control OSC. It looks rougher, but it has a lot of advantages to me.
+ Game of Life included!
+ you can use and update labels :))
+ Has a nice muti touch widget unfeatured in touch osc
+ You can script the interface using java script manipulation in gh, stream it to your dropbox and update in one "tap", as follows
Does anyone have experience with scripting interfaces for this software? I'm stuck already. I know nothing of java script to begin with. As you can see I managed to format the labels but the osc message I could not find a way, it stays untouched.
Just in case someone knows better, here are my "objects" (I said that right?). The userXXX are replaced in GH.
{ "name":"userName", "type":"Slider", "x":(xPadding + .11), "y": yPadding, "width":.82, "height":.082, "color":"userColor", "min":userMin, "max":userMax, "ontouchmove" : "var roundedvalue = this.value.toFixed(userFix); LbluserName2.changeValue(roundedvalue)", "onvaluechange": "oscManager.sendOSC('/userName', 'f', this.value.toFixed(userFix))",},{ "name":"LbluserName1", "type":"Label", "x":xPadding, "y": yPadding, "width":.1, "height":.05, "color":"userColor", "value": "userName"},{ "name":"LbluserName2", "type":"Label", "x":xPadding, "y": (yPadding + 0.05), "width":.1, "height":.05, "address":"/userName", "color":"userColor", "value": 0},…
hop innovativo sulle prospettive e sfide future del design computazionale.
INFO ED ISCRIZIONI
PLUG IT | Rhino + Grasshopper | Livello Base | Modellazione parametrica e controllo di forme complesse
Plug it, primo step del percorso formativo in tre fasi “AAD Workshop Series“. Plug it fornirà ai partecipanti un’effettiva padronanza delle più avanzate tecniche di modellazione digitale, approfondendo le metodologie della modellazione algoritmica e parametrica nel campo dell’architettura e del design del prodotto. Il corso è rivolto a studenti e professionisti dei settori della progettazione architettonica, design, moda e gioielleria, con esperienza minima nel disegno CAD bidimensionale (acquisita su qualsiasi piattaforma software) e si articolerà in lezioni teoriche frontali ed esercitazioni guidate
FORM FINDING STRATEGIES | Livello Intermedio | Analisi ambientale ed ottimizzazione della forma
Form Finding Strategies è il secondo step del percorso formativo in tre fasi “AAD Workshop Series“. Il workshop intende esplorare le possibilità di generazione di forme efficienti in relazione ad influenze esterne ed alle caratteristiche intrinseche della materia stessa. Analisi ambientale (input solari, termici ed acustici) ed analisi/ottimizzazione strutturale FEM saranno le principali metodologie utilizzate per raggiungere gli obiettivi di ricerca della forma. Saranno introdotti numerosi plug-ins tra cui: Weaverbird, Kangaroo, Geco/Ecotect, Ladybug, Millipede. Il corso si rivolge a studenti e professionisti con conoscenza base di Rhino e Grasshopper.
PERSPECTIVES | Livello Avanzato | Python coding e modellazione algoritmica avanzata
Il nuovo corso Perspectives proposto per la prima volta nel 2019 (ed ultimo step del percorso formativo in tre fasi “AAD Workshop Series) introdurrà gli studenti alla programmazione Python ed alla sua integrazione con Grasshopper. Verranno inoltre esplorate tecniche avanzate di generazione formale basate su iterazioni. Tra i principali plugins utilizzati: GhPython, Anemone, Hoopsnake, Plankton, MeshMachine, Pufferfish. Pensato come workshop innovativo sulle prospettive e sfide future del design computazionale, è rivolto a studenti e professionisti con esperienza in modellazione algoritmica con Grasshopper.…
) Course Fee: Professional EUR 825,- (+VAT), Student EUR 415,- (+VAT)
Led by plug-in developer and structural engineer Clemens Preisinger, along with Zeynep Aksoz and Matthew Tam from the expert Karamba3D team, this three-day workshop will focus on methods of setting up structural systems in the parametric environment of Grasshopper. The participants will be guided through the basics of analyzing and interpreting structural models, to optimization processes, and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D. However, advanced users are also encouraged to apply. It is open to both professional and academic users. For beginner users of Rhino and Grasshopper, there will be an optional introductory course one day before the Karamba3D course.
Karamba3D 1is a parametric structural engineering tool which provides accurate analysis of spatial trusses, frames, and shells. Karamba3D is fully embedded in the parametric design environment of Grasshopper, a plug-in for the 3D modeling tool Rhinoceros. This makes it easy to combine parameterized geometric models, finite element calculations, and optimization algorithms like Galapagos.
Course Outline
Introduction and presentation of project examples
Optimization of cross sections of line-based and surface-based elements
Geometric optimization
Topological optimization
Structural performance informed form finding
Understanding analysis algorithms embedded in Karamba3D and visualizing results
Complex workflow processes in Rhino, Grasshopper, and Karamba3D
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 participants is required for the workshop to take place. The workshop will be canceled if this quota is not filled by October 28. The workshop will be taught in English.
Course Requirements
Basic Rhino and Grasshopper knowledge is recommended. An introductory course is offered.
No knowledge of Karamba3D is needed. Participants should bring their own laptops with Grasshopper and either Rhino 5 or Rhino 6 installed. You can download a 90-day trial version of Rhino. Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
Please register here……
Added by Matthew Tam at 6:38am on September 13, 2019
uired information, a poor representation of data evolve misreading messages and by turn ambiguous responses especially with complex data. Inforgraphics are graphic visual representations of information, data or knowledge intended to present complex information quickly and clearly. In the nowadays flow of complex information, Infographics is the key for optimized visual communication. The use of infographics is an important step towards developing a pedagogical approach that draws on visuals where 90% of Information is transmitted to the brain so it is crucial to tickle the optic nerves to get people excited about data. The workshop investigates how computational tools can aid in designing and controlling complex information to be easily understood in addition to improve cognition by utilizing graphics to enhance the human visual system’s ability to see patterns and trends and much more likely to be remembered in today’s fast – paced environment. This workshop investigates multiple computational tools and techniques of developing coefficient visualization of data types including; network, statistical and hierarchal data. The workshop objective is to reconsider visual representation a promising design tool for architects, artists and designers. /// Application To apply, please follow this link to fill the application form https://docs.google.com/forms/d/1HOv6c1_LzhHNJU5n_FLvuhC-Yg75HDfbEcq6TN6mulI/viewform /// Fees 1200 EGP for students / 1500 EGP for graduates and young professionals more info on the workshop webpage: http://www.encodestudio.net/#!infographics/cqvl
POSTS
…