e to constrains, I HAVE to do it like this (I can't 3D print everything or opposite).
First
I have no idea how to make the panels, without so many duplicate Edges, Faces etc.
Second
I can't figure out how to align the triangle panels to fit in the construction, so it can be assembled ideally without glue. This problem is both conceptual (I can't figure out how to do it fiscally) and grasshoper-wise - I don't know how to organize data list and produce a global movement, so that the triangle parts do not intersect with each other, BUT intersect the 3d printed construction part (where they fit fix in or just fit and can be glued).
Triangles will be milled out from 3mm Plexiglas, BUT I will not have an option to mill at an angle, so only 90° edges.
3D printed parts will be executed by a high level production powder printer, so it should hold good.
Any ideas?
best,
cuki
…
File) 2. I have designed a curved Trichordal-Truss from one curve in Rhino.
The Truss is lying in the XY direction and the footer is placed on the zero point.
3. And now my problem:
I want to put the Truss-object on the feet, move 90°
(from the XY axis to Z axis, see sketch 1).
4. Then copy / move the truss to all 36-points of ellipse (see sketch 1).
5. Align the 36 trusses with the center of the triangle .
pointing at the center of the ellipse (see sketch 2).
6. Using a slider to change the position of the 36-Trusses at der ellipse.
Variable distance between Truss and ellipse (see sketch 3).
Thanks for you Answer.
Best regards
Noureddine…
multiply of variants from Galapagos, to have a chance for better analysis and comparability after. I also would like to use more then one solution in my design after.
In old topics i found kind of 3 solutions.
1.Change Galapagos to octopus ( what don t really want to do, i am kind of happy with Galapagos)
2. Use Slingshot! and MySQL Database ( it s look a little bit too complicated from the first view)
3. Use Colibri and Design Explorer Platform (looks kind of pretty way to solve my problem)
So i tried to add Colibri components to my definition , but have some mistake in the Colibri Aggregator after adding the Genome "An item with the same key already been added". I think it comes because for some steps i am using the "Gen Pool" and not a normal slider. Is it a way to connect Gen Pool and Colibri (i really prefer to have it, then a lot of sliders in some cases)?
And the second question (if i will get it solved with gen pool), could i somehow controll the recording process? For example i would likte to record only variants wit fitness over 90% or start recording just after 20. generation and record till the end?
I also opend for all other possibilities to reach the same goal (record/save/bake multiply variants from galapagos)
…
starting as soon as possible.
We're offering challenging projects, insights and contact to leading industry companies, project responsibilities according to abilities and initiative, great work environment and laid-back atmosphere, room to play and evolve,...
Our ideal candidate:
- is passionate about construction, engineering and (computational) design
- is proficient in Rhino / Grasshopper / (GH-)Python
- knows his ways around the Adobe Suite and MS Office
- has a current work permit for Germany
- is a German speaker (other native speakers also welcome, with excellent English skills)
- has an architectural background (Student / BA / MA /...), ideally with work experience
- is interested / has experience in digital manufacturing and prototyping
- will be able to join us shortly
We're looking forward to your applications / inquiries / CVs to: mpelzer@fat-lab.de
View our past projects here: www.fat-lab.com
(Current projects, unfortunately, are non-disclosed)
…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
d the fact that one pipe goes out and one goes in, that the surface normal direction is opposite for the two surfaces? Based on an earlier thread, you should know why by now. The two curves have opposite directions (again!); see the white arrows using Rhino 'Analyze | Direction'?
As before, you can fix that by flipping one curve to match the other. HOWEVER, you connected your curves directly to the 'Divide' components instead of using 'Crv' geometry params - bad form. And as before, you "fixed it" by reversing the list of starting points ('S' input to 'BiArc'). Better like this - 'Crv' params are internalized, no need for Rhino file:
Well, well! That didn't fix the opposite surface normals after all! Trust me, though, using geometry params and being conscious about matching curve directions is "best practice". But I haven't lofted 'BiArc' curves for awhile, it's late and I want to move on. OH! I just noticed that you reversed the 'Z' direction for one half of the 'BiArc' - that explains it:
Moving on... You've basically got it, though I would do it differently - same result, like this:
I haven't really explained surface normal vectors - can you figure it out from here? One more little wrinkle (Normal_2017Mar17b.gh):
…
Added by Joseph Oster at 12:03am on March 18, 2017
ported to Rhino and "set" in Grasshopper, i trim both surfaces from their rectangular bases so that when sDivide is used it creates and distributes the same number of points on each surface.But heres the problems: a) if i use the "trimmed" surfaces with SrfGrid it errors warning: "A point in the grid is null. fitting operation aborted".I'd learned this was caused by "nulls" replacing position Data Items when the rectangular grid(surface base) was trimmed away. So i used Clean Tree which worked removing all nulls, then Shift Paths\Flip Matrix to create line-endpoint pairs for Polyline\Evaluate Curve. I Flattened the last Flip Matrix placing all data items in one source for SrfGrid, like in the working Untrim\CopyTrim definition.This time,.b) SrfGrid errored with: "The UCount value is not valid for this amount of points",.So, i substituted a 356 value, numeric Slider in the Addition B param., and tested its range until a valid UCount was found. Then SrfGrid fitted a surface thru the points, BUT,d) those SrfGrid surfaces are extremely deformed even thought the points preceding it from Evaluate Curve are accurate,SEE: def: "3b-RGH_SurfaceBlend.gh",AND,.a2) if i use Untrim with CopyTrim then SrfGrid works, but since the Jokers limbs WILL be in different surface positions then the blends between the Arm (for example) will rise from its relative FLAT position on the untrimmed Source surface to the Arm on the Target surface, rather than morphing from the Corresponding Arm position on the Source surface,. ..see def.: "4-RGH_SurfaceBlend.gh"So please let me know,..1) how to produce accurate surfaces from SrfGrid in def.: "3b-RGH_SurfaceBlend.gh",. ..(NOTE: BOTH these def's contain 2 indentical, "internalized" surfaces, but if def. 3b can be made to work it will also work with Dis-similar surfaces)2) which component to use or how else to determine the correct UCount value for a specified amount of points(ie:155), re: SrfGrid error: "The UCount value is not valid for this amount of points",.3) how else to force SrfGrid to work with Trimmed surfaces?, AND,..4) how to force intersurface, point-blend correspondence lines: Polylines(PLine) to be connected between correctly! correponding positions (Limbs) on the surfaces?,
Really! appreciate all help, definitions and kind generosity common to this knowledgable membership,
Cheers!,
Jeff…
50 and reduced the 'cell size' slider to 0.5. When the 'Azimuth' angle is changed to 180 +- 90 (dawn or dusk), the points are widely dispersed, reducing the density and increasing the number of cells in the "sparse grid". Under these conditions, the number of cells was ~2000 and the Profiler time for 'Boundary' went up to a full minute or more each time 'Altitude' or 'Azimuth' was changed.
So I created this code to benchmark some alternatives and found two interesting things:
'Boundary' surface performance (v.1) is not linear. As the number of surfaces goes from 1000 to 2000, the time per surface goes up dramatically.
I tried three alternatives for creating a rectangular surface at a given point that are all substantially faster: v.2, v.3 and v.4. For 2000 points, v.4 is 150 times faster than v.1 !!!
Performance of v.2, v.3 and v.4 are similar and all scale up very well. To benchmark beyond 2000 points, I recommend disabling the VERY SLOW v.1. At 5000 points the 'Pop2D' component takes ~11.3 seconds but v.3 and v.4 take less than one second to generate 5000 surfaces!
See boundary_2015Nov19a.gh attached.
So I replaced the 'Rectangle' and 'Boundary' components in my sun reflection model with v.4 in focus_2015Nov19b.gh (also attached) and the performance is amazing.
I'm sure someone has mentioned this performance issue with 'Boundary' on the forum before but as with many things, I didn't realize what a major obstacle it can be until I discovered this for myself.…
Added by Joseph Oster at 9:16pm on November 19, 2015
grout lines, a tile surface and tile perimeter poly line). I then use that as a Mesh (from Rhino) in the second definition.
2. I can tile out the mesh surface and rotate all the tiles in 90 deg. increments.
To get what I wanted. I took the Mesh and have copied it in series to make a grid. I can then control the dimensions of the grid. X and Y extents. I can also rotate the tiles around their centers.
The spacing of the grid is set from an edge curve of the tile (or mesh). This sets the size of the squares in the grid themselves.
See definition, images and Rhino 4 File, to give the definitions a shot. I have labeled how to use them.
My question -- how can I randomly rotate squares in my grid? I would like the deg of rotation to be random and also which tiles they are.
Also how might I rotate (every other tile) for example? So that I can control the pattern more?
Thoughts?
Thanks!
…
ror when it comes to points on edges of the surface.I guess it is because normal vectors at a few of points are invalid. After all, because of these invalid points, an error message comes out which is saying " Runtime error (PythonException) : Unable to add polyline to document " and it results in no output. Please give me some help if you know how to handle this problem. I post a code below.Thanks in advance.
---------------------------------------------------------------------------------------------
import Rhinoimport rhinoscriptsyntax as rsimport mathimport ghpythonlib.components as gh
output_crvs = []
for pt1 in input_pt :output_pts = []newPt = pt1output_pts.append(newPt)
while len(output_pts) <= 100: newPt = outputpoint(base_srf, newPt, distance_factor) output_pts.append(newPt)
output_crv = rs.AddPolyline(output_pts)output_crvs.append(output_crv)A = output_crvs
def outputpoint(base_srf, input_pt, distance_factor):centre_point = rs.AddPoint(0,0,0)height_point = rs.AddPoint(0,0,10)
zaxis = rs.VectorAdd(centre_point, height_point)
cp_pt = rs.SurfaceClosestPoint(base_srf, input_pt)normal_vector = rs.SurfaceNormal(base_srf, cp_pt)drain_vector = rs.VectorCrossProduct(normal_vector, zaxis)
dvector2 = rs.VectorUnitize(drain_vector)dvector3 = rs.VectorRotate(dvector2, 90, normal_vector)
mpt = gh.DeconstructVector(distance_factor*dvector3)moved_pt = rs.PointAdd(input_pt, mpt)moved_uv = rs.SurfaceClosestPoint(base_srf, moved_pt)output_pt = rs.EvaluateSurface(base_srf, moved_uv[0], moved_uv[1])
return output_pt…