n get the correct results with cooling loads:
3. After I update LB+HB, a warning is given for the set EP construction component:
4. so I replaced it with the latest one (Feb 05, 2017):
5. Now the cooling loads is missing from the result for reason unknown ...
May I ask if the missing cooling loads is related to the latest update of LB+HB? What component update is causing this problem?
BTW, I'm using Singapore's epw file, and for a tropical city, there should be no heating energy at all. So, sth clearly is wrong over here ...
Thanks.
…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…
requires four weather data inputs: air temperature (_dryBulbTemperature), relative humidity (relativeHumidity_), wind speed at 1.1 meters from the ground (windSpeed_) and mean radiant temperature (meanRadiantTemperature_).You can add values to the first three inputs from the Ladybug "Import Epw" component. For the last (meanRadiantTemperature_), you can add it from Ladybug's "Outdoor Solar Adjusted Temperature Calculator" component, or let "Thermal Comfort Index" component to calculate it. Both use different methods to calculate the final values.
I attached an example file below with second option.For more precise calculations you can use Honeybee and Chris' microclimate maps.An icing on the cake for the end: one of Ladybug developers yesterday released a set of Ladybug components for modelling in ENVI-met application. ENVI-met is cutting-edge microclimate software, which can be downloaded for free. It opens a number of advanced new analysis in outdoor domain, which couldn't have been done with the current Ladybug+Honeybee tools. So you can perform the simulation in ENVI-met 4 free software, and then add mean radiant temperature values from ENVI-met simulation to "Thermal Comfort Indices" component. Here is an example file.If you would like to go with the last approach, then the best would be to post a question about it in this topic.
1) You can make a polygonized tree.I haven't subtracted the trunk from the crown, but I guess it makes sense that it can be done.2) In most solar related simulations, a default albedo value of 0.2 is used. This corresponds to average albedo value taken from materials surrounding the urban or countryside location (concrete, grass, gravel, sand, asphalt...). However the presence of snow can significantly magnify the average albedo value several times. "Sunpath shading" components albedo_ input has an ability to calculate albedo due to presence of snow, if nothing is added to it (to albedo_ input). As you are performing the analysis of PET in a horizontal plane, it will not affect your calculations.3) Most thermal comfort indices will require performing analysis at 1.1 meters above the ground. This is considered to be height of standing person's gravity center.The same goes for PET index. So you are correct: you should place the analysis grid at 1.1 meters above the ground before adding it to the "Sunpath Shading" component.It is worth mentioning that "Thermal Comfort Indices" component used in this topic's PET_on_Grid2.gh and PET_on_Grid3.gh files is from last year, and much slower than the newest one (VER 0.0.64 MAR 18 2017) used in the example attached below. Just a remainder if you have been using older version of this component.Let me know if I misunderstood some of your questions, or if I missed to answer some of them.
EDIT: sorry for posting a double reply. When I posted it the first time, I only got links visible, with no text. Something has been wrong with grasshopper ning forum for the last couple of months.…
y using the Honeybee_Update Honeybee component.
The video below (best viewed in full-screen mode) provides an idea of what these components are capable of being used for:
The video below shows how these components can be used in an existing Honeybee project (for additional links please open this video in youtube):
I have uploaded two examples as Hydra files that show how these components can be used for grid-point and image-based simulations:
Example1 : Grid Point Calculations
Example2: Image based simulation
Finally, a more esoteric application is demonstrated in this video:
These components are still in the beta-testing stage. Some of the limitations of the components are:
1. Only Type C photometry IES files are supported at present.
2. Rhino is likely to get sluggish if there are too many luminaires (i.e. light fixtures) present in a scene.
3. Due to the spectral limitations of the ray-tracing software (RADIANCE), simulations involving color mixing might not be physically realizable.
Additional details about photometric and spectral calculations are probably an overkill for this forum. However, I'd be glad to answer any related questions. Please report any bugs or request new features either on this forum or on Github.
Mostapha, Leland Curtis, Reinhardt Swart and Dr. Richard Mistrick provided valuable inputs during the development of these components.
Thanks,
Sarith
Update 16th January 2017:
An example with some new components and bug fixes since the initial release announcement can be found here
…
y anyway ;))
Since 2014 i begun to get back into the construction biz for some dozen main reasons, one of them being the highly increased availability of this kind of software "power", and robotics.
first project ended by 1stQ 2015 was focused on the development of a parametric block for construction. (almost sure the first parametric product designed in Uruguay, and probably one of the few first of this kind globally...)
Far from being a complicated model. In fact the standard model is extremely simple, key thing is that is fully parametric...
dimensions, materials, textures, colors... and so on
second key thing is that the main common component of the blocks (an EPS core) is robotically machined...
the blocks are the base of a construction system (oriented mainly - though not restricted only - to residential buildings) that
- is based on digital models, tendentially to be used in parametric models of buidings
- lab tested to prove to be 1.5 times as compression resistant than traditional bricks and blocks. (autoportability up to two stories buildings)
- has recently proved (due to size) to be 300% more efficient than the classic and 200% more efficient than steel frame in (our country official figures)
check it out here
--
https://drive.google.com/file/d/0B1TRxxgF_sEnQnZrTkZGbUx3cmM/view
--
- and it's aimed to be mass produced and handled by robots...
this project ended on 1H 2016
and i filed 4 patents in the process.
3 of them of mechanical devices designed as extensions for a cnc machine i own
and the fourth (
the patent related specifically with the blocks ) included a dozen of innovations (believe me...i have almost 15 yrs in the biz, and are coool stuff...)
along the project I've been working with inventor, even knowing in advance it will lack the kind of features I wanted to program many things... (lisp, VB, etc.... all same species of -prehistoric - animals) to leverage the tool to the sky - and far beyond... -
but was an alternative valid by that time because it allows the implementation of some form of parametric models, had a local representative and some supposedly skilled guys in the neibourhood....
but life is hard... and none of the latter two rendered me any significant help
so I had to take the tour myself...
- mind i never regret to do things that others cant -
and finish what i start
this one was a great project for many figures... and ended with more results than the ones commited to accomplish...
... some more history here ....
then because of a customer who brought a ZHA project ! to quote..., I crossed with rhino, and then met GH again to notice to my great joy and pleasure, in what kind of animal it had developed...
since money talks I'm investing hard on getting up to the expectations, and beyond as i usually do...
and thats how we met..
2017-2018 it's the time frame to build two robots. first one is a prototype to handle the k-nano blocks in the production process, delivery AND at the construction site ( a "smart crane" we nicknamed...)
the other one is the first prototype of robot to assist in the fabrication (smart blocker we called it to be creative ! ;))
then by 2018-2019 i'll be making a "kinda contour crafter" machine to complete the pie :) (you'll be interested on this..)
i guess you already know what all this has to do with GH...
i already have all the components i can imagine to do almost all i ever wanted to do in relation to this set of projects
but in almost a single tool !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i can design, animate, render, optimize, simulate and even robotic simulate..
so, i have to ask...
is there a chance you might be interested in helping us in some projects we are starting on march and june 2017 (8 and no more than 18 months of duration respectively) ?
sent you a friend request, for the case you might be interested to continue by e-mail...
in any case many thanks for your help and inspiration !
best regards !
long happy marriage, and large figures bank account !
…