, presso la sede Manens-Tifs, nei giorni 26,27 e 28 maggio 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 12 maggio 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Pellinindustrie.…
component I just used different components and GH tools to do the same - and this become part of my short paper submission for SimAUD 2016). My solution compares the height of the same points of different solar envelope and then chose the lowest one. I read about the improvement you are working on and it is good but I think it is not yet what I need (or how the solar envelope tool could be more complete).
What I need is a solar envelope that would guarantee on different facades with different orientations (the example I sent you) a certain amount of direct sunlight, say 4h per day in a given period for example all the month of June at 60°N. So to guarantee the south facing facade I should chose the vectors from 10 to 14. But these are not ok for all the other facades because in this timeframe the East and West facing facades get only 2 hours and the North get 0 hours.
So the fist step would be have the possibility to chose different sun vectors for different facades. For the example I did (the 4 hours in June at 60°N) the south facing facade would need from 10 to 14, the East facing for example from 8 to 12, the West facing facade from 12 to 16 and the North facing facade from 6 to 8 and from 18 to 20.
If I would chose a single longer time frame that could get all these hours, from 8 to 20 then the resulting solar envelope would result probably smaller than the sum of the four solar envelopes.
But this is not complete yet. I mean the use of different sun vectors on different facades. The reason is that for example when I chose the sun vectors from 8 to 12 for the four hours on the East facing facade how do I know that the sun hit on the facade in that time frame or maybe it is obstructed by surrounding buildings? Since the sun at 60°N (where I live) in June rise at around 3.15 then maybe for that specific facade the sun hit from 4 to 8 and not from 8 to 12.
I did an extreme case talking about 60°N and that maybe the sun hit on a facade at 4 instead than 12, but it is just to make understand the logic. My suggestion for a more advanced solar envelope it should be integrated with the Sunlight Hours tool of ladybug. So the input should not be the sun vectors because I don't know when the sun hit on the facade but the input should be just the desired number of hours and the possibility to specify different number of hours for each facade. Then this last component that sum different solar envelope (I didn't use it yet but I understood what it does) should be integrated yes so the result would be one single solar envelope more likely using the lowest points (the highest I don't understand what for).
Let me know what you think!
…
erona, nei giorni 01,02 e 03 dicembre 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 16 novembre 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Glas Müller.…
ndrea Graziano (Co-de-iT) Arch. Salvo Pappalardo (AION architecture) Arch. Giovanni Basile (Officina Ermocrate)
[.] Descrizione:
Modulo 1 Il workshop è finalizzato a fornire ai partecipanti i fondamenti della modellazione parametrica e generativa attraverso Grasshopper, plug-in di programmazione visuale per Rhinoceros 3D (uno dei più diffusi modellatori NURBS per l‘architettura e il design). Il workshop mira a gestire e sviluppare il rapporto tra informazione e geometria lavorando sui sistemi di involucro in condizioni specifiche. La discretizzazione di superfici (pannellizazione sia Nurbs che Mesh), la modellazione delle geometrie attraverso informazioni (siano esse provenienti da dati di analisi ambientali, da mappe di colore o da database), l’estrazione e la gestione di informazioni richiedono la comprensione delle strutture dei dati al fine di definire un processo che va dalla progettazione alla costruzione. I partecipanti impareranno come costruire e sviluppare strutture di dati parametrici per informare geometrie ‘data-driven’ e come estrarre le informazioni rilevanti da tali modelli per il processo di costruzione.
Modulo 2 Il workshop, volto a promuovere le nuove tecnologie digitali di supporto alla progettazione e alla fabbricazione, fornirà ai partecipanti, utilizzando Grasshopper, gli strumenti per la preparazione dei modelli 3D di elementi modulari decorativi "bricks & tiles" in argilla la cui successiva prototipazione avverrà tramite fresatura dello stampo con pantografo CNC a 3 assi. Il workshop darà quindi ai partecipanti i fondamenti per l’utilizzo di tale strumento di fabbricazione digitale e si concluderà con la fabbricazione di un proprio modello realizzato durante il corso.
[more info]
[Press Kit]…
思った感じになりません。
balls の代わりにplanarカーブを直接入れてみましたがエラーが出ます。
ファンクションにしてみたところ、forループので作った数値が反映されていません。
ファンクションのインスタンス?を出力していないと思い上記のようにしましたがエラーが出てしまいます。
以上の事から自分の認識が正しいのかよくわからなくなりました・・・
python自体の深いところをわかっているわけではないので余計こんがらがりました。
そこで、for b in ballsはどのような条件または使い方であれば使えるのでしょうか?
そして、上記のように別のオブジェクトに対しての使い方はどのようにすればできるのでしょうか?
2:同じファンクション内のdist = rs.Distance(self.pos,b.pos)についてですが
この文章も for b in balls によってbはBallのインスタンスであると定義?されたためb.posがbの位置であると分かるのでしょうか?
pythonは定義しなくても動いてしまうのでどのような時に使えるのか文章見ただけではよくわかりません・・・
大変細かいことかもしれませんが、よりpythonをしっかりと理解するためにも、どなたかわかる方ご教授いただけると幸いです。…
azione tramite interfaccia grafica 6 ore
Interfaccia Grasshopper
Parametri e Componenti
Operazione di Logica e Matematica
Vettori
Case study: concetto base di attrattore
Gestione data matching
Primi approcci alla modellazione parametrica – 4 ore
Trasformazioni di base (sposta ruota scala orienta)
Strumenti di Morphing
Utilizzo di Sweep e Loft e di altri strumenti di creazione superfici già noti da Rhinoceros
Esercitazione pratica: creazione del modello concettuale della Serpentine Gallery - B.I.G.
Focus sulla gestione dei dati - 4 ore
Creazione e gestione delle liste
Studio del data tree
Esercitazione pratica: creazione di un soffitto cassettonato
Creazione di geometrie tramite mesh – 6 ore
Utilizzo degli algoritmi di Delaunay
Utilizzo del Facet Dome
Utilizzo del Substrate
Utilizzo degli algoritmi di Voronoi
Esercitazione pratica: creazione di un gazebo attraverso l’uso di pattern
Creazione di ‘paneling’ di superfici curve – 6 ore
Discretizzazione di una superficie a doppia curvatura tramite pannelli piani
Strumenti analisi superfici
Visualizzazione superfici tramite falsi colori
Esercitazione pratica: creazione di una facciata interattiva
Digital Fabrication e messa in tavola – 6 ore
Interoperabilità tra Grasshopper e altri applicativi
Creazione di Truss parametrica
Gestione dell’abaco dei pezzi
Esercitazione pratica: la Facciata dello Stadio Friuli di Udine - Ipotesi di costruzione e gestione tramita fabbricazione digitale
Requisiti di accesso
Conoscenza delle tematiche CAD di base e dei comandi principali e interfaccia Rhinoceros 5.
Certificazioni
Alla fine del corso verranno rilasciate le certificazioni ufficiali da ART (Authorized Rhinoceros Trainer)
Numero partecipanti
Il corso parte al raggiungimento di un minimo di 4 persone ad un massimo di 8. Ogni partecipante dovrà essere munito di proprio computer con Rhinoceros.
Costo del corso
Il costo del corso è di 600 € + IVA
Sconto di 50,00 € per i giovani che hanno meno di 26 anni.
Ulteriore sconto di 50,00 € Early Bird per tutti coloro che si iscriveranno entro il 5 Settembre 2016
Nel prezzo è compresa l’iscrizione al FabLab Toscana – maggiori informazioni qui
FabLab Toscana
Il FabLab Toscana presenta un insieme di per i propri associati: sarà possibile l’accesso ai laboratori del FabLab (durante i normali orari di apertura), partecipare ai workshops gratuitamente o a prezzi calmierati, l’utilizzo della macchine (seguendo il regolamento interno), …
rototyping techniques, the programme will investigate patterns of emergence, differentiation and complexity in natural formation processes which will be transformed to digital simulation platforms for design purposes. In contemporary architectural processes, a significant diversion from linear parametric tools towards generative design simulations is taking place. The design and analysis processes will reflect this shift by focusing on simulations, whereby attention will be kept on the process of design generation as opposed to the final form itself. The design agenda of the programme will revolve around the design and fabrication of a one-to-one scale pavilion.
The programme will be formulated as a two-phase process:
Stage 1: Participants will gain an understanding of formation processes in nature, coupled with core concepts related to complexity. During this stage, basic and advanced tutorials on generative design algorithms and analysis tools will be provided. AA Istanbul VS will perform as a team-based workshop promoting collaboration and research. Participants will be introduced to advanced fabrication techniques.
Stage 2: Participants will propose design interventions based on the skills and knowledge gained during the first stage. Study models of various scales will be produced, finally followed by the fabrication and assembly of a full scale working prototype which unifies the design goals of the programme.
The design agendas of AA Athens and AA Istanbul Visiting Schools will directly create feedback on one another, allowing participation in either one or both Programmes.
Prominent features of the programme / skills developed:
Participants will be part of an active learning environment where the large tutor to student ratio (4:1) allows for personalized tutorials and debates.
The toolset of AA Istanbul includes but is not limited to Rhinoceros, Grasshopper, and Processing.
Participants will have access to large-scale digital fabrication tools.
Design seminars and international lecture series will support the key objectives of the programme.
Eligibility
The workshop is open to current architecture and design students, PhD candidates and young professionals.
Accreditation
Participants receive the AA Visiting School Certificate with the completion of the Programme.
Applications
The AA Visiting School requires a fee of £600 per participant, which includes a £60 Visiting Membership fee. Discount options for groups or for those wishing to apply for both AA Istanbul and AA Athens Visiting Schools are available. Please contact the AA Visiting School Coordinator for more details.
The deadline for applications is 30 May 2016. No portfolio or CV, only requirement is the online application form and fees.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/istanbul
http://ai.aaschool.ac.uk/istanbul/
For inquiries, please contact:
elif.erdine@aaschool.ac.uk…
y anyway ;))
Since 2014 i begun to get back into the construction biz for some dozen main reasons, one of them being the highly increased availability of this kind of software "power", and robotics.
first project ended by 1stQ 2015 was focused on the development of a parametric block for construction. (almost sure the first parametric product designed in Uruguay, and probably one of the few first of this kind globally...)
Far from being a complicated model. In fact the standard model is extremely simple, key thing is that is fully parametric...
dimensions, materials, textures, colors... and so on
second key thing is that the main common component of the blocks (an EPS core) is robotically machined...
the blocks are the base of a construction system (oriented mainly - though not restricted only - to residential buildings) that
- is based on digital models, tendentially to be used in parametric models of buidings
- lab tested to prove to be 1.5 times as compression resistant than traditional bricks and blocks. (autoportability up to two stories buildings)
- has recently proved (due to size) to be 300% more efficient than the classic and 200% more efficient than steel frame in (our country official figures)
check it out here
--
https://drive.google.com/file/d/0B1TRxxgF_sEnQnZrTkZGbUx3cmM/view
--
- and it's aimed to be mass produced and handled by robots...
this project ended on 1H 2016
and i filed 4 patents in the process.
3 of them of mechanical devices designed as extensions for a cnc machine i own
and the fourth (
the patent related specifically with the blocks ) included a dozen of innovations (believe me...i have almost 15 yrs in the biz, and are coool stuff...)
along the project I've been working with inventor, even knowing in advance it will lack the kind of features I wanted to program many things... (lisp, VB, etc.... all same species of -prehistoric - animals) to leverage the tool to the sky - and far beyond... -
but was an alternative valid by that time because it allows the implementation of some form of parametric models, had a local representative and some supposedly skilled guys in the neibourhood....
but life is hard... and none of the latter two rendered me any significant help
so I had to take the tour myself...
- mind i never regret to do things that others cant -
and finish what i start
this one was a great project for many figures... and ended with more results than the ones commited to accomplish...
... some more history here ....
then because of a customer who brought a ZHA project ! to quote..., I crossed with rhino, and then met GH again to notice to my great joy and pleasure, in what kind of animal it had developed...
since money talks I'm investing hard on getting up to the expectations, and beyond as i usually do...
and thats how we met..
2017-2018 it's the time frame to build two robots. first one is a prototype to handle the k-nano blocks in the production process, delivery AND at the construction site ( a "smart crane" we nicknamed...)
the other one is the first prototype of robot to assist in the fabrication (smart blocker we called it to be creative ! ;))
then by 2018-2019 i'll be making a "kinda contour crafter" machine to complete the pie :) (you'll be interested on this..)
i guess you already know what all this has to do with GH...
i already have all the components i can imagine to do almost all i ever wanted to do in relation to this set of projects
but in almost a single tool !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i can design, animate, render, optimize, simulate and even robotic simulate..
so, i have to ask...
is there a chance you might be interested in helping us in some projects we are starting on march and june 2017 (8 and no more than 18 months of duration respectively) ?
sent you a friend request, for the case you might be interested to continue by e-mail...
in any case many thanks for your help and inspiration !
best regards !
long happy marriage, and large figures bank account !
…
phere with the maximum number of triangles but not much than a defined threshold.
I scaled that mesh just to fit Rhino grid, but it is not mandatory. What is useful, is to scale not uniformly the mesh (Scale NU). It could be done after cellular modifier applied or before or before and after. The 3 options are possible in the script. If you don’t need them just put 1 in scale sliders.
Ellipsoid mesh is the populated with points, I put 2 independents populations to randomize a bit further. For each vertices of the mesh the closest distance from the populated points is calculated.
Here is an illustration in color of this distance.
This distance is then used to calculate a bump. If domain for bump is beginning with negatives values to 0, it carves the mesh. Instead it bumps/inflates it.
Some images to illustrate the difference with populating 100 points with one or two populations.
Here some images to illustrate the application of scale before carving or after.
Next phase apply noise. At the moment I don't find it good.…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the