doing this with the current tools or a bit of scripting since the Flickr API allows you to make requests in a REST format, but utilizing the Flickr.net API library makes it much simpler.
First and foremost, you need a Flickr API key...do you have one of those?
A great way to get to know the Flickr API is with the API Explorer. Here is a link to the page for the flickr.photos.search method explorer: http://www.flickr.com/services/api/explore/flickr.photos.search
The cool thing about this page is that it generates the REST Http call towards the bottom. So, here is what I did:
1. Grab the coordinates of the bounding box per Flickr API request:
bbox (Optional)
A comma-delimited list of 4 values defining the Bounding Box of the area that will be searched. The 4 values represent the bottom-left corner of the box and the top-right corner, minimum_longitude, minimum_latitude, maximum_longitude, maximum_latitude. Longitude has a range of -180 to 180 , latitude of -90 to 90. Defaults to -180, -90, 180, 90 if not specified. Unlike standard photo queries, geo (or bounding box) queries will only return 250 results per page. Geo queries require some sort of limiting agent in order to prevent the database from crying. This is basically like the check against "parameterless searches" for queries without a geo component. A tag, for instance, is considered a limiting agent as are user defined min_date_taken and min_date_upload parameters — If no limiting factor is passed we return only photos added in the last 12 hours (though we may extend the limit in the future).
So, I went to Google Earth, picked a city (London, UK) and dropped two pins:
This gave me two locations, which I can put into the Explorer Page next to the bbox option. Here is what I put for these two points: -0.155941,51.496768,-0.116783,51.511431
2. Check has_geo
3. In extras, type in geo
4. Make the call!
You will see a list of responses in an XML format, these responses will be from the first page. Geolocated photos are limited to 250 / page, so you will have to grab them page by page.
If you want to add more options (minimum upload date, maximum upload date, etc) you can do this as well)
The best is at the bottom, you get the full http call for this: http://api.flickr.com/services/rest/?method=flickr.photos.search&api_key=ffd44f601393a46e86aa3a5f8a013360&bbox=-0.155941%2C51.496768%2C-0.116783%2C51.511431&has_geo=&extras=geo&format=rest&api_sig=b42330e5d1523bd5fe60c2ad43acde99
Notice this call has some other api key, you should eventually replace this with your own.
You could copy and paste this into a browser and you will get the results with the latitude and longitude:
So this is really what you need to know to do this through GH. Since gHowl has an XML parser component that can access files on the web, you should be able to use the same http call into this component.
Eventually, we get a response, and we need to grab the lat and lon data. With gHowl we can map these to xyz coordinates, and generate the heatmap...this is just a linear mapping:
Attached are both the Rhino file and the Grasshopper file, as well as the image underlay.
I am working on a series of components that makes this more straightforward, but for now, this should get you started.
…
r." I'm sorry to hear that, I take the interface and ease-of-use rather seriously so this sounds like a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative."What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it."[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Visual Programming.I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
Context sensitivity."There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal this time around is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
Sliders."I think they should be optional."They are optional."The “N” should turn into the number if set."What if you assign more than one integer? I think I'd rather see a component with inputs 'N', 'P' and 'X' rather than '5', '8' and '35.7', but I concede that is a personal preference."But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly."Agreed.
Components."Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data."Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
Integration."Why isn't it just live geometry?"This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry."Maybe add more Rhino functionality to GH. GH has no 3D offset."That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
Documentation.Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
2D-ness."I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
Organisation.Agreed. We need to come up with better ways to organise, document, version, share and simplify GH files. GH1 UI is ok for small projects (<100 components) but can't handle more complexity.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
david@mcneel.com…
n common tasks like updating GH definitions, viewing images on the GH canvass, and augmenting existing study-types. Most of the improvements to Honeybee have been in the making for a while and are just getting into the spotlight with this release. Notably, a number of improvements have been made to support large-scale full building energy models, including fixes to memory issues with large models, better components for splitting building masses into zones, and the ability to store HBZones in external files. Additionally, the THERM workflows have gotten a boost and these simulations can now be run directly from the Grasshopper canvass.
As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee before you do so and update your scripts. So, without further adieu, here is the list of the new capabilities added with this release:
LADYBUG
Better Method for Updating Old Grasshopper Files - As many of you have come to realize, Ladybug + Honeybee is updated on a fairly regular basis, with a stable release roughly every 6 months and a github version that never ceases to improve itself on a weekly basis. For this reason, we realize that updating old Grasshopper definitions to use recent components is a challenge for many of us. While we’ve had some methods for this in the past, there were always hiccups, particularly when it came to components that had new inputs/outputs since the previous version. Accordingly, Mostapha has added a new “Ladybug_Update File” component that will automatically update any Grasshopper Definition to be synchronized with the version of Ladybug+Honeybee that is currently in your toolbar (aka. the components in your userobjects folder). If there is a component that has new inputs/outputs since the time you built the definition, it will be automatically circled in red in your GH definition and a newer version of the component will be automatically added right next to this component:
While you still have to do some manual connecting of inputs to the newer component in this case, it should be much faster than our older methods and will hopefully help your old definitions survive long into the future!
EPWmap Now includes OneBuilding Files - Mostapha has added a number of new features to the EPWmap web interface that the “Download Ladybug” component connects to. Among the improvements are a color wheel that quickly shows you how hot, cold, and comfortable a given climate is and, perhaps more importantly, there is now support for EPW files sourced from OneBuilding. With the addition of many more weather files, you should now be able to use Ladybug with ease for more locations across the planet. We should also note that the “Open EPW and STAT” component that downloads/unzips files from a URL now supports OneBuilding URLs.
New Image Viewer Component - Mingbo Peng has graced Ladybug with a fantastic new “Image Viewer” component that takes a given image file on one’s machine and displays it on the Grasshopper canvas. It also enables one to pull color data off of the image with ease by simply clicking on the pixel of the image one is interested in. This new component is useful for a wide variety of cases, including the viewing of screenshots after they have been taken with the “Ladybug_Capture View” or “Ladybug_Render View” components. However, many of you will likely recognize it as most immediately useful in workflows involving image-based Honeybee Daylight (Radiance) simulations. This is particularly true as Migbo has built-in the capability to read many image file types, including PNG, JPEG, GIF, TIFF and the High Dynamic Range (.HDR) image files that Radiance Outputs:
The following video gives a quick overview of the Image Viewer’s capabilities:
The new component can be found under the Ladybug_Extra tab and I think I speak for us all in saying thank you Mingbo for this great component!
New Sun Shades Calculator Released Under WIP - After over a year of software development and nearly a career's worth of geometric math development, a joint effort between Abraham Yezioro and Antonello Di Nunzio has produced a new sun shade design component that can be described as nothing short of “magical.” Based on a similar principle to the current “Ladybug_Shading Designer,” the new component takes an input of sun vectors and produces shade geometries that can block the vectors. However, in comparison to the shading designer, the range of shade options that are available in this new component is truly staggering, ranging from classic overhangs, louvers and fins to pergolas and custom shade surfaces. Perhaps more importantly, the calculation methods used by this new component are faster and more reliable. It can currently can be found under the WIP section of Ladybug and it will continue to evolve in new versions of Ladybug.
Renewable Component Now Support Sandia and CEC Photovoltaics Modules - Polishing off his many contributions to the “Renewables” section of Ladybug, Djordje Spasic has added support for a couple more ways of defining Photovoltaic modules for renewables estimation. Specifically, the Ladybug WIP section now includes components to import modules defined with the California Energy Commission (CEC) and Sandia Labs.
HONEYBEE
Support for OpenStudio 2.x - A few months ago, the National Renewable Energy Lab (NREL) released a stable version of OpenStudio version 2, which included a number of improvements in stability and available features. This stable release of Honeybee is built to work with the new version of OpenStudio and, in the coming months, Honeybee will be adding a few more capabilities to its OpenStudio workflows to support v2.x’s new capabilities. Most notable among these will be support for OpenStudio measures. Measures are short scripts written in Ruby using OpenStudio’s SDK to quickly edit and change OpenStudio models. They are fundamental to visions of OpenStudio as a flexible energy modeling interface and to Honeybee’s goals of being a collaborative interface between the architectural and engineering industries. Stay tuned for the next release for many of these new capabilities!
Critical Memory Issue Fixed for Large Energy Models - A number of you wonderful members of our community have been aware of computer memory issues with large Honeybee models for some time (examples: 1, 2, 3, 4). Namely, a model that is larger than 50 zones could quickly eat up 16 GBs of memory and change Honeybee from a fast-flying insect to something more reminiscent of a snail. We are happy to say that, after a much longer time than it should have taken us, we finally identified and fixed the issue. In this version of Honeybee, such large models can now be created using less than 2% of the memory and time previously. Thanks to all of you who made us aware of this and hopefully you will now reap the rewards of your struggle.
Split Building Mass Component Getting a Makeover - Many of you veteran Ladybug users will recognize Saeran Vasathakumar as one of the original contributors of Ladybug who added components for solar fans and envelopes years ago. Now he’s back with new components to split a building mass into zones that are truly revolutionary in their speed and methodology. Saeran has divided the new capabilities into two components (one for floor-by-floor subdivision and another for core-perimeter subdivision) and they both can be found under the WIP section of this release. In this WIP version, core-perimeter thermal zones can only be generated for all convex and very simple concave geometries. Most concave geometries and geometries with holes (or courtyards) in them will fail. However it can handle even very complex convex geometries with speed and ease. You can expect the component to start accommodating concave/courtyard geometries very soon.
Load / Dump HB Objects to File - Keeping in line with the support of large, full building energy models, this release includes full support for two components that can dump and load any HBObjects to a standalone file. All information about HBzones can go into this file including custom constructions, schedules, loads, natural ventilation, shading devices, etc. You can then send the resulting .HB file to someone else and they can load up the same exact zones in another definition. This also makes it possible to have one Grasshopper file for generating the zones and running the simulation and another GH definition to import results and color zones/surfaces with those results, make energy balance graphics, etc.
Write ViewFactorInfo to File - After many of you asked for it, the _viewFactorInfo that is output from the “Honeybee_View Factor” component can now be written out to an external file using the same Load / Dump HB Objects components cited above. For those of you who have worked with the comfort map workflows, you probably already know that calculating these view factors is one of the most time consuming portions of building a microclimate map. Having to re-run this calculation each time you want to open up the Grasshopper script is a nuisance and, thanks to this new capability, you should only have to run it once and then store your results in an external .HB file.
Transform Honeybee Components Modified for Large Model Creation - Many large buildings today are made up of copies of the same rooms repeated over and over again across multiple floors, or along a street, etc. Accordingly, one can imagine that the fastest way to create a full building energy model of such buildings is to simply move and copy the same zones several times. This is what a new set of edits to the Honeybee Transform components is aimed at supporting by allowing one to build a custom set of zones, translate them several times with a Honeybee_Transform component, then solve adjacencies on all zones to make a complete energy model.
Central Plants Available on HVAC Systems - While Honeybee has historically supported the assigning of separate HVAC systems to different groups of zones, each HVAC was always an entirely new system from the ground up. So a building with separate VAV systems for each floor would be modeled with a different chiller and boiler for each floor. While this can be the case sometimes, it is more common to have only one chiller and boiler per building but separate air systems for each floor. The new ‘centralPlant_’ options on the Honeybee coolingDetails and heatingDetails enable you to create this HVAC structure by making a single boiler and chiller for any HVAC systems that have this option toggled on. Furthermore, in the case of VRF systems, you can also centralize the ventilation system, using the grouping of zones around a given HVAC to assign which zone terminals are connected to a given heat pump.
More HVAC Templates Added - As the profession continues to push the industry standard towards lower-energy HVAC systems, Honeybee intends to keep up. In this release, we have included a few more templates for modeling advanced HVAC systems including Radiant Ceilings, Radiant Heated Floors + VAV Cooling, and Two Ground Source Heat Pump (GSHP) systems. Variable Refrigerant Flow (VRF) systems have also gotten a large boost as it is now possible to model these systems with more efficient water-source loops. The next release will include the ability to model central ground source systems that use hydronics for heating cooling delivery.
Run THERM Simulations Directly from Grasshopper - Anyone who has used the THERM workflow in the past likely realized that, while Honeybee can write the THERM file, you would still have to open model in THERM yourself and hit “simulate” to get results. Now that LBNL has started a transition to becoming more open, they have graciously allowed free access for everyone to run THERM from a command line. What this means for Honeybee is that you no longer need to open THERM at all in order to get results and you can now work entirely in Rhino/Grasshopper. This also opens up the possibility of long parametric runs with THERM models since you can now automatically run simulations and collect results as you animate sliders, use galapagos, etc. A special thanks is due to the LBNL team for exposing this feature, including Setphen Selkowitz, Christian Kohler, Charlie Curcija, Eleanor Lee, and Robin Mitchell.
All Options Exposed for THERM Boundary Conditions - To finish off the full implementation of THERM in Honeybee, a final component has been added called “Honeybee_Custom Radiant Environment.” This component completes the access to all boundary condition options that THERM offers, including separate radiant and air temperatures, different view factor models, and the specification of additional heat flux (which is typically used to account for solar radiation).
Improvements to Schedule-Generating Components - Many of you who have watched the Honeybee energy modeling video tutorials have likely gotten in the habit of using CSV schedules for everything. While this is definitely one valid way to work, it is not always the most efficient since simple schedules can be specified much more cleanly to EnergyPlus/OpenStudio and the use of CSVs can also make it difficult to share your energy models (since you have to send CSV files along with the schedules themselves). This release adds two new schedule components that should take care of a lot of cases where CSV schedules were unnecessary. The new “Constant Schedule” component allow you to quickly make a schedule that is set at a single value or a set of constantly repeating 24-hour values. The second component allows you to create “Seasonal Schedules” by connecting “week schedules” from the other schedule components along with analysis periods in which these seek schedules operate. Together, these will hopefully make our schedule-generating habit a bit better as a community.
Lastly, many of you may know Mingbo Peng as the current maintainer of the Design Explorer web interface and the Colibri components under TTToolbox. Both of these tools have been revolutionary in enabling “brute force” studies of design spaces (aka. Grasshopper scripts where one runs all combinations of a set of sliders). Now, Mingbo has graced Ladybug with the aforementioned image viewer component and it is with pride that we welcome Mingbo Peng to the development team!
As always let us know your comments and suggestions.Cheers!
The Ladybug Tools Development Team
…
ger work.
Be aware, this release breaks file-forwards compatibility. You will not be able to open gh and ghx files saved with 0.8.0050 on previous versions, though of course you should be able to open old files without problems. If this is not the case, please yell loudly.
If you're having trouble loading Grasshopper, note that you must have the latest Microsoft C++ Runtimes installed on your machine. They can be downloaded from the microsoft website.
The new release can be downloaded from the usual location.
Here's a list of changes, additions and fixes since 0.8.0013:
File format forwards compatibility has been broken. You will not be able to open files saved with 0.8.0050 on earlier versions.
This release contains many breaking changes and GHA libraries compiled for older version may not work anymore.
Grasshopper Binary files (*.gh) are now saved as compressed data.
Grasshopper Binary files (*.gh) are now the default format.
Support for ancient versions of the Text Panel (still called Post-It from back then) has been removed.
Support for ancient versions of the Path Mapper (still called Path Lexer from back then) has been removed.
Placeholders for ancient versions of the Graph Mapper have been removed.
Gradient input parameters now show state tag icons (Reversed, Flatten etc.).
Geometry Cache name changes are now updated on every key press.
Geometry Cache name changes can now be cancelled with Escape.
Geometry Cache name changes can now be undone.
Mesh|Mesh intersection component now uses a different algorithm. The old behaviour is still available from the component menu.
Warning and Error balloons are now drawn as part of a Canvas Widget and will no longer show up in the Hi-Res image export.
Galapagos now accepts multiple fitness values. The true fitness will be the average of the collection.
Galapagos wires are drawn much fainter when the Galapagos object is unselected.
Medium fast redraw mode in Galapagos now immediately redraws instead of at the end of each generation.
Redesigned all Grasshopper file format icons and added larger size icons for high-dpi explorer views.
Redesigned the Most Recently Used files menu, it should now display much quicker.
Compass widget has been rewritten in an attempt to increase display performance.
Added preferences section for Compass widget.
Added preferences section for Align widget.
Added preferences section for Default Preview colours.
Added preferences section for Document Preview colours.
Added preferences section for the Most Recently Used files menu.
The Area component now accepts Breps, Meshes and Planar Closed Curves.
The Area Centroid component now accepts Breps, Meshes and Planar Closed Curves.
The Volume component now accepts Breps and Meshes.
The Volume Centroid component now accepts Breps and Meshes.
Added Merge Faces component (Surface.Util panel).
Added a Mesh Smooth component (Mesh.Util panel).
Added a Curve Seam component (Curve.Util panel).
Added Interpolate Curve With Tangents component (Curve.Spline dropdown).
Added GrasshopperFolders command to open Settings, Components and UserObject folders without loading the core plugin.
The window that reports on certain Loading Errors now has a Copy button.
Added Simplify post-process filter to parameters (in addition to Reverse, Flatten and Graft).
Parameter post processes (Reverse, Flatten, Graft & Simplify) can now also be assigned to output parameters.
Version History window now has formatting (not happy with this, I'm working on something better).
The Process Info window is gone.
Main menu has been redesigned.
Canvas toolbar has been redesigned.
Canvas context menu has been replaced by a Radial Menu.
Canvas now has a radial menu which will pop up on Middle Mouse Button clicks.
It's possible to switch between Radial and Legacy menus in the Preferences (Interface.Canvas section).
'Save As Copy' feature has been replaced by 'Save Backup' which is a GUI-less save including date+time stamp.
Added a 'Show in Folder' item to the File menu.
AutoSave settings are no longer available from the File menu, you now need to use the Preferences.
Selection shifts now also modify the view so you can use Ctrl+Left and Ctrl+Right to navigate up and downstream.
Mesh Edge display can now be toggled with Ctrl+M.
Preview modes now have shortcuts (Ctrl+1 = no preview, Ctrl+2 = wireframe, Ctrl+3 = shaded).
Solution States now have a default name.
Data Viewer window now responds to all required events.
Data Viewer window can now handle input and output parameters as well.
Canvas Navigation pane can now be dragged using the icon in the upper left corner.
The Persistent Data Editor has been redesigned.
It's now possible to select multiple items in the Persistent Data Editor list and edit their properties.
It's now possible to drag multiple items at the same time in the Persistent Data Editor list.
Item addition to the Persistent Data Editor is much improved.
The Persistent Data Editor is now non-modal.
The Canvas would remain black upon maximizing the Rhino window, this is fixed.
Sliders would cause multiple updates under certain conditions, this is fixed.
Digit Scrollers would cause multiple updates under certain conditions, this is fixed.
Pipes were inside out. This is fixed.
The curve component would not adjust invalid nurbs degrees, this is fixed.
Curves referencing Brep edges failed to load, this is fixed.
Points referencing Brep edges failed to load, this is fixed.
Referenced dlls in the VB/C# components sometimes resulted in invalid imports statements, this is fixed.
Pasting geometry in Rhino would cause a recompute of the Grasshopper solution, this is fixed.
Importing a file into the Rhino document would cause a recompute of the Grasshopper solution, this is fixed.
Galapagos would trigger superfluous solutions, this is fixed.
Mesh Solid Difference had a wrong name and description, this is fixed.
Several menu items were not greyed out despite not being usable, this is fixed.
The position and size of the Grasshopper window failed to get stored on Rhino shutdown, this is fixed.
The Persistent Data Editor would crash on parameters that did not support data proxies, this is fixed.
I'll add some additional information regarding some of the new UI features in subsequent posts.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
e chosen to dive into Grasshopper. I’m about 6 months in. If some of my comments are completely off, please take that to mean that a feature is too inaccessible to a newish user rather that it’s just missing, as I may have stated.
One of my primary pain points is this. Things that can be done in other programs are invariably easier in other programs. This is a big enough issue that I doubt there’s an easy solution that an armchair qb like myself can offer up.
The interface:
I’ve used a lot of 3D programs. I’ve never encountered one as difficult as grasshopper. What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design. Yet PTC (Parametric Technology Corp.) has been doing parametric design software since 1985 and has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others.
In the early 2000's, when parametric design software was all the rage, McNeel stated quite strongly the Rhino would remain a direct modeler and would not become a parametric modeler. Trends come. Trends go. And the industry has been swinging back to direct modeling. So McNeel’s decision was probably ok. But I have to wonder if part of McNeel’s reluctance to incorporate some of the tried and proven ideas of other parametric packages doesn't have roots in their earlier declaration to not incorporate parametrics.
A Visual Programming Language:
I read a lot about the awesomeness and flexibility of Grasshopper being a visual programming language. Let’s be clear, this is DOS era speak. I believe GH should continue to have the ability to be extended and massaged with code, as most design programs do. But as long as this is front and center, GH will remain out of reach to the average designer.
Context sensitivity:
There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them.
Sliders:
I hate sliders. I understand them, but I hate ‘em. I think they should be optional. Ya, I know I can r-click on the N of a component and set the integer. It’s a pain, and it gives no feedback. The “N” should turn into the number if set. AAAnd, sliders should be context sensitive. I like that the name of a slider changes when I plug it into something. But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly. I shouldn't be able to plug in a “50” and have everything after turn red.
Components:
Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings.
And this item I’m guessing on. I’m not yet good enough at GH to know if this may have adverse effects. Reverse, Flatten, Graft, etc.; could these be context sensitive? Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?
Tighter integration with Rhino:
I'm not entirely certain what this would look like. Currently my work flow entails baking, making a few Rhino edits, and reinserting into GH. I question the whole baking thing, btw. Why isn't it just live geometry? That’s how other parametric apps work. Maybe add more Rhino functionality to GH. GH has no 3D offset. I have to bake, offsetserf, and reinsert the geometry. I’m currently looking at the “Geometry Cache” and “Geometry Pipeline” components to see if they help. But I haven't been able to figure it out. Which leads me to:
Update all of the documentation:
I'm guessing this is an in process thing and you're working toward rolling GH from 0.9.00075 to 1.0. GH was being updated nearly weekly earlier this year. Then it suddenly stopped. If we're talking weeks before a full release, so be it. But if we're looking at something longer, a documentation update would help a lot. Geometry Cache and Geometry Pipeline’s help still read “This is the autogenerated help topic for this object. Developers: override the HtmlHelp_Source() function in the base class to provide custom help.” This does not help. And the Grasshopper Primer 2nd Ed. was written for GH 0.60007.
Grasshopper is fundamentally a 2D program:
I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen? Pretty much every 3D program in existence has this. I’m sure I can probably figure out how to deconstruct the breps, join the curves, loft, trim, and so forth. But does writing an algorithm to do what all other 3D programs do with a dialog box seem reasonable? I'm sure if you go command by command you'll find a ton on such things.
If you look at the vast majority of things done in GH, you'll note that they're mostly either flat or a fundamentally 2D pattern on a warped surface.
I've been working on a part that is a 3D voronoi trimmed to a 3D model. I've been trying to turn the trimmed voronoi into legitimate geometry for over a month without success.
http://www.grasshopper3d.com/profiles/blogs/question-voronoi-3d-continued
I’ve researched it enough to have found many others have had the exact same problem and have not solved it. It’s really not that conceptually difficult. But GH lacks the tools.
Make screen organization easier:
I have a touch of OCD, and I like my GH layout to flow neatly. Allow input/output nodes to be re-ordered. This will allow a reduction in crossed wires. Make the wire positions a bit more editable. I sometimes use a geometry component as a wire anchor to clean things up. Being able to grab a wire and pull it out of the way would be kinda nice.
I think GH has some awesome abilities. I also think accessing those abilities could be significantly easier.
~p…
re are major changes and enhancements.
HONEYBEE
More Flexible Workflow - Many small modifications were made to support a more flexible workflow, such as the ability to separate a zone created with masses2Zones into editable HBSrfs that can be recombined. For the energy components, it is now possible to plug custom constructions directly into the components that set the zone constructions without writing them first into the library. For the daylighting components it is now possible to change all of the materials of specific surface types at once.
Support for Complex Geometry - Many small bugs for complex geometry have been fixed including the ability to import energy results correctly for curved NURBS surfaces as well as unconventional window configurations. Also, the intersectMasses component now almost always succeeds in splitting all of the surfaces of adjacent zones, no matter how complex the intersection is.
Automatic Download Issues Fixed - Many users who faced issues with not having “gendaymtx.exe” or who had trouble syncing with our github know that we faced an issue with automatic background downloads.
Air Walls - Honeybee EnergyPlus models now officially support air walls (or virtual partitions) in a basic implementation. Now, any time that you use the air wall construction or set a surface type to “air wall,” the air between adjacent zones will be automatically mixed. At present, this mixing is just a constant flow based on the surface area between zones connected by air walls multiplied by an adjustable “flow factor.” It is important to stress that this basic air mixing is not with the EnergyPlus Airflow Network, although the groundwork laid in this release will eventually allow for the implementation of the Airflow Network in future releases. As such, this present air mixing is only suitable for multi-zone conditions where there is not significant buoyancy-driven flow between zones.
Natural Ventilation - To go along with the new potential introduced by air walls, there has been a basic implementation of EnergyPlus’s natural ventilation objects in a new component called “Set EP Airflow”. The current setup allows for three possible types of natural ventilation: 1) natural ventilation through windows (with auto-calculated flow based on window area, outdoor wind speed/direction, and stack effects), 2) custom wind and stack objects that can be used to model things such as chimneys off of single zones, and 3) constant, fan-driven natural ventilation.
Additional Thermal Mass - The capability to add additional thermal mass to zones has been added. This is useful for factoring in the mass of indoor furniture or heavy interior objects such as chimneys.
New Utility Components - Abraham has added a couple of useful components to help calculate lighting loads based on bulb types and target lighting levels as well as a converter from ACH to the m3/s-m2 that the other HB components accept. Along this vein, there is also a component for adding in the resistance of Air Films to HB constructions.
Improved and Editable Ideal Air Loads System - The EnergyPlus Ideal Air System now goes through an automatic sizing period at the start of the simulation based on the extreme weeks of the weather file. Furthermore, the ability to adjust many of the parameters of the ideal air loads system have been added with a new “Set Ideal Air Loads Parameters” component. The component allows you to add in heat recovery, air side economizers and demand-controlled ventilation.
OpenStudio Export Update - The OpenStudio workflow is still largely under development but this release includes a version with a working VAV and PTHP system template for those curious with experimenting. Note that not all of the new features available for the basic “Run Energy Simulation” component are available for the OpenStudio component (such as air walls, natural ventilation, or additional thermal mass).
Microclimate/Indoor Comfort Maps - Blossoming from initial experiments with the radiant temperature map, a workflow for looking into sub-zone microclimate and indoor comfort has been initiated. All components for this are presently under the Honeybee WIP tab but, over the next month, they will be completing their development phase and moving into the rest of the tabs. If you are interested in testing when they are ready, please let Chris know. For a teaser video of the intended capabilities, see this video: (https://www.youtube.com/watch?v=fNylb42FPIc&list=UUc6HWbF4UtdKdjbZ2tvwiCQ)
LADYBUG
Monthly Bar Chart - After much demand from multiple parties, a new component to create monthly bar and line charts has been added. The component is particularly useful for plotting the outputs of the “Average Data” component like monthly EPW data or averaged monthly-per hour data. It also supports daily data and any type of Energy simulation results.
Wind Profile - To go along with the new capabilities of natural ventilation in Honeybee, Ladybug now has a fully fleshed-out Wind Profile component that allows you to visualize how wind speed changes with height in relation to your building geometry. The component is geared to understanding the conditions of prevailing wind and will be useful in the future for setting up CFD models. Credit goes to Djordje Spasic for adding in all of the new capabilities. In a similar vein, the appearance of the wind rose has also been improved thanks to suggestions from Alejandra Menchaca.
Faster Solar Adjusted Temperature - Thanks to the SolarCal method from the Center for the Built Environment at UC Berkeley (http://escholarship.org/uc/item/89m1h2dg), the solar adjusted temperature component now includes an option for a much faster calculation that produces results that are very close to those originally obtained with the genCumSky component. Instead of using the cumulative sky, the component can now accept the direct and diffuse radiation from the ImportEPW component. Over a whole year, this essentially takes a calculation that used to be a half-hour and shrinks it down to 10 seconds. Thanks again to those at UC Berkeley for keeping their work open source!
Instructions - Last but not the least, [It took me almost two years to understand this but finally] we have a text file that describes the installation step by step and is way easier to modify than a video. You can find it in the zip file. Credit goes to Chris!
We also want to welcome Anton, Patrick and Sandeep to the team. Anton has kicked off his development by working on a component to import and visualize epw ground temperature data and he will be continuing to develop components to bring in reliable precipitation data to Ladybug. With this basis, he will continue to implement Honeybee components for ground heat storage, earth tubes, rain collection and hot water systems. Patrick and Sandeep are working on integration of Honeybee to Energy Performance Calculator.
As always let us know your comments and suggestions.
Enjoy!…
the data structure of the input.
I'll create a component that aims to write all the GH_Paths inside the input data structure into separate output parameters. I'll add a menu item to the component that allows users to synch the number of outputs with the current data.
Note that there are some bugs I found related to Undo here, but I'll attempt to fix those asap. The mechanisms employed in this example are correct.
Let's start with the Component class definition and the constructor:
Public Class GH_ExampleComponent_VarOutput
Inherits GH_Component
Public Sub New()
MyBase.New("Extract Paths", "ExPath", "Extract all the paths from a tree", "Sets", "Tree")
End Sub
End Class
Now, the RegisterXXXXParams methods:
Protected Overrides Sub RegisterInputParams(ByVal pManager As GH_Component.GH_InputParamManager)
pManager.Register_GenericParam("Tree", "T", "Data tree to examine", GH_ParamAccess.tree)
End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As GH_Component.GH_OutputParamManager)
'We'll add one output parameter, just to not have a jagged output.
pManager.Register_PathParam("Path 1", "1", "1st path in tree")
End Sub
SolveInstance() is somewhat special, but not very complicated:
Protected Overrides Sub SolveInstance(ByVal DA As IGH_DataAccess)
'We have only one input parameter and it is set to Tree,
'so SolveInstance will only be called once for every solution.
'We don't actually need the data inside the input, we're only interested in the paths.
'So we don't actually need to call DA.GetDataTree, we can just go in and extract the
'paths directly:
Dim paths As IList(Of GH_Path) = Params.Input(0).VolatileData.Paths
'Abort if there is no tree.
If (paths.Count = 0) Then Return
'Post a warning if the number of output parameters does not
'equal the number of paths in the tree.
If (paths.Count < Params.Output.Count) Then
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "There are more outputs than paths in the tree.")
ElseIf (paths.Count > Params.Output.Count) Then
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "There are fewer outputs than paths in the tree.")
End If
'Iterate over all paths and assign to output parameters.
For i As Int32 = 0 To Math.Min(Params.Output.Count, paths.Count) - 1
DA.SetData(i, paths(i))
Next
End Sub
Adding a menu item to the component menu is relatively straightforward, however handling the menu command requires a fair bit of logic:
Protected Overrides Sub Menu_AppendCustomComponentItems(ByVal iMenu As System.Windows.Forms.ToolStripDropDown)
'Add a single item to the component menu.
Menu_AppendGenericMenuItem(iMenu, "Synch outputs", AddressOf Menu_SynchOutputClicked)
End Sub
Private Sub Menu_SynchOutputClicked(ByVal sender As Object, ByVal e As EventArgs)
'Here we have to synch the number of output parameters with the number
'of paths in the volatile data tree in the input parameter.
'This requires a few steps:
'1. Determine whether something needs to happen at all.
'2. Record an undo event.
'3. Remove excess outputs or add missing outputs.
Dim paths As IList(Of GH_Path) = Params.Input(0).VolatileData.Paths
If (paths.Count = Params.Output.Count) Then Return 'yay, nothing needs to be done.
'Something needs to be done, record an undo state.
RecordUndoEvent("Synch output")
'We either have too few or too many outputs, determine which is the case.
If (paths.Count > Params.Output.Count) Then
'Add the missing outputs
For i As Int32 = Params.Output.Count + 1 To paths.Count
Dim param As New Grasshopper.Kernel.Parameters.Param_GenericObject()
param.Name = "Path " & i.ToString()
param.NickName = i.ToString()
If (i.ToString.EndsWith("1")) Then
param.Description = i.ToString() & "st path in tree"
ElseIf (i.ToString.EndsWith("2")) Then
param.Description = i.ToString() & "nd path in tree"
ElseIf (i.ToString.EndsWith("3")) Then
param.Description = i.ToString() & "rd path in tree"
Else
param.Description = i.ToString() & "th path in tree"
End If
Params.RegisterOutputParam(param)
Next
Else
'Remove excessive outputs
Do
If (Params.Output.Count <= paths.Count) Then Exit Do
Dim param As IGH_Param = Params.Output(Params.Output.Count - 1)
Params.UnregisterOutputParameter(param)
Loop
End If
Params.OnParametersChanged()
ExpireSolution(True)
End Sub
Finally, we must make sure that the component properly (de)serializes. This means we have to override the Write and Read methods and add additional information to the GHX archive:
Public Overrides Function Write(ByVal writer As GH_IO.Serialization.GH_IWriter) As Boolean
'We must make sure that the number of output parameters is correctly stored.
'We'll use a special function on the GH_ComponentParamServer to accompish this
'without too much sweat.
Params.WriteParameterTypeData(writer)
Return MyBase.Write(writer)
End Function
Public Overrides Function Read(ByVal reader As GH_IO.Serialization.GH_IReader) As Boolean
'Very important, we must make sure all parameters exist before we
'start with the main deserialization.
Params.Clear()
Params.ReadParameterTypeData(reader)
Return MyBase.Read(reader)
End Function
I attached a VB file that contains the code outlined above.
--
David Rutten
david@mcneel.com
Seattle, WA…
Added by David Rutten at 11:43pm on October 27, 2010
Analysis Tools (LAT). Our plugin has come a long way in the last 4 years and, while the legacy version will still include some small updates and contributions, we are confident in saying that the changes will be far fewer and the plugin more stable in the following months as we switch gears into the LAT effort. I can say personally that (save for a couple of small capabilities) I have made it through my list of critical features and I will hereafter be working on making these features cross-platform, cleanly-implemented, and well-documented in the new Ladybug Analysis Tools software package. As always, you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
The majority of changes with this release represent “icing on the cake” after a long, multi-year effort to connect to the major open source engines and datasets. So, without further adieu, here is the list of the new capabilities added with this release:
LADYBUG
Stereographic Sky Projections - Thanks to several code contributions from Byron Mardas, all Ladybug sky visualizations now support stereographic projections! Such projections are useful for understanding the hemispherical visualizations in a 2D format and they also make it easier to overlay different sky datasets on top of one another. Check here for an example file showing the sun path overlaid with helpful/harmful parts of the sky and see here for an example file using shading masks representing strategies (like an overhang) on top of the helpful / harmful portions of the sun path.
Wind Rose Upgrades - Devang Chauhan has added several new features to the Ladybug wind rose including both visual and numerical outputs of average wind velocity and frequency for each petal of the rose. Not only does this enhance the usefulness of the rose but it also paves the way for the use of the wind rose to set up CFD simulations once Butterfly is released in the near future. The new features of the wind rose can be seen in this hydra example file.
Complete Set of Local Thermal Discomfort Models - After the last release included components to evaluate radiant asymmetry discomfort (which can be modeled using these example files: 1, 2), today’s release completes Ladybug’s suite of local discomfort models from ASHRAE and the ISO by adding components to account for discomfort from cold draft. Specifically, two draft models have been added for different types of situations. The first is an older model published by P.O. Fanger, which was developed through experiments where subjects had cold air blown on the back of their neck (the most sensitive part of the body to draft). While this is useful for understanding a worst-case scenario, it can greatly overestimate the discomfort for cases of draft at ankle level - a more common occurrence that typically results from the tendency of cold air to sink. For this situation, a second draft discomfort model has been included, which is specifically meant to forecast ankle draft discomfort. The model is currently undergoing review for integration into ASHRAE-55 and a publication outlining the derivation of this model can be found here:
Liu, S., Schiavon, S., Kabanshi, A. and Nazaroff, W. (2016), Predicted Percentage Dissatisfied with Ankle Draft. Indoor Air. Accepted Author Manuscript. doi:10.1111/ina.12364 (http://escholarship.org/uc/item/9076254n).
Special thanks is due to Shichao Liu, Toby Cheung and Stefano Schiavon for sharing the model and the results of their study with the development team. The integration of draft models completes the full integration of ASHRAE-55 and EN-15251 with Ladybug. Now, you can rest assured that, if there is a certain thermal comfort standard that you need to fulfill for a given project, you can model it with the ‘bug!
Window-Based Draft Model - With the integration of draft models, the first question that one might ask is “how should these models be applied to typical design cases?” While the (soon-to-be-released) Butterfly plugin for OpenFOAM should open up a Pandora’s box of possible situations, this release of Ladybug includes a simplified downdraft model from cold vertical surfaces, which helps model several typical cases of draft discomfort. The model has been validated across several papers:
Heiselberg, P. (1994). Draught Risk From Cold Vertical Surfaces. Building and Environment, Vol 29, No. 3, 297-301
Manz, H. and Frank, T. (2003). Analysis of Thermal Comfort near Cold Vertical Surfaces by Means of Computational Fluid Dynamics. Indoor Built Environment. 13: 233-242
It has been built into the “Ladybug_Downdraft Velocity” component and has been included in an example file illustrating discomfort from cold windows in winter. The example is intended to show when glazing ratio and window U-Values are small enough to eliminate perimeter heating - a practice that is aesthetically unpleasing, costly to maintain and wasteful in its energy use.
Operative Temperature on the Psychrometric Chart - This is a feature that should have been added a long time ago but we are finally happy to say that the Ladybug_Psychrometric Chart can draw a comfort polygon assuming that the air temperature and radiant temperature are the same value (aka. an operative temperature psychrometric chart). This operative temperature chart is the format that is needed to use the ASHRAE-55 graphical method and is generally a better representation of the range of comfort in cases where one does not intend to hold the radiant temperature constant. This operative temperature capability is now set as the default on the component but you can, of course, still bring back the older comfort polygon by simply plugging in a value for meanRadiantTemperature_.
Contour Map Visualizations - Using the same inputs as the Ladybug_Recolor Mesh component, the new Ladybug_Contour Mesh component allows you to generate contoured color graphics from the results of any analysis. Now, you to maximize the use of your high-resolution studies with contours that highlight thresholds and gradients!
Image Texture Mapping for Colored Meshes - Antonello DiNunzio has added the very useful Ladybug_Texture Maker component, which allows you to bake Ladybug colored meshes with image texture maps (as opposed to the classic method that used colored vertices). This enables the creation of transparent Ladybug meshes, making it even easier to overlay Ladybug graphics with one another and with Rhino geometry:
This component also adds the ability to render Ladybug + Honeybee meshes with other rendering programs like V-Ray and 3ds Max. So you can produce Ladybug graphics like this!
Finally, image-mapped textures are also the format required for gaming and Virtual Reality software like Unity and Augmented Reality programs like Augment. So now you can export your Ladybug meshes all of the way to the virtual world!
Rhino Sun Component - If you have ever had to set up the sun for a rendering plugin and wished that you could just take your Ladybug sun and use that, then you are in luck! Byron Mardas has contributed a component that lets you set the Rhino sun based on your EPW location data, your north direction (if different from the Y-Axis) and any time of day that you want. Not only does this make it easier to coordinate the Rhino sun with your Ladybug visualizations, but you can also use it for real time shadow previews by setting your Rhino view to “Rendered” and scrolling through a slider.
Rendered Ladybug Animations - With both the image texture mapping and the Rhino sun components released, your first thought might be “it would be great if I could use this all in a rendered animation!” Thankfully, Ladybug has added a new component to help you here. The Ladybug_Render View component works in essentially the same way as the Capture View component, allowing you to make a series of images as you animate through a slider. The major benefit here is that it works with both Rhino Render and V-Ray so that animations like this can be produced effortlessly:
Cone of Vision Added - Antonello Di Nunzio has added a component that allows you to visualize various cones of vision in order to help inform your view studies. You can fine tune parameters to include just text-readable or full peripheral vision and use the resulting view cone to constrict the results of your “Ladybug_View Analysis” studies.
Terrain WIP Components Released as the Gismo Plugin - Our friend Djordje has released a new plugin Gismo - a plugin for GIS environmental analysis. As a result the following 5 terrain components: Horizon Angles, Flow Paths, Terrain Shading Mask, Terrain Generator 2, Terrain Analysis, have been removed from Ladybug+Honeybee's WIP section and are added to Gismo.
HONEYBEE
Search, Select, and Import the Hundreds Outputs from EnergyPlus/OpenStudio - Many of the power users in our community know that EnergyPlus is capable of writing several hundred different outputs from the simulation (well beyond what the basic Honeybee result readers can import). While Honeybee has always allowed one to request these outputs by adding them to the simulationOutputs_ of the component, there has not been an official workflow for searching through all of the possible outputs or importing their specific results… until now! We have added the "Honeybee_Read Result Dictionary" component, which allows you to parse the Result Data Dictionary (or .rrd file) that EnergyPlus outputs during every run of a given model. This allows you to see all of the outputs that are available for the model and you can even search through this list to find a particular output that you are interested in. Once you find what you are looking for, simply copy the text output from the component into a panel and and plug this into simulationOutputs_. Then you can use the "Honeybee_Read EP Custom Result" component to bring your custom results into GH after rerunning the simulation. The example file of an evaporative cooling tower shows how to use the workflow to request and import in the energy removed by the tower.
OpenStudio HVAC System Sizing Results - After the full integration of HVAC in the last release, we realized that a number of people wanted to run EnergyPlus models simply to evaluate the size of the Heating/Cooling system in the model (obtained from the EnergyPlus autosize calculation that is run at the start of every simulation). Such a sizing calculation can be a great way to quantify the anticipated savings from a given strategy (like shading) on the size/cost of the building’s HVAC system. To get the results of the sizing calculation, all that one needs to do is connect the output eioFile from the OpenStudio component to the Honeybee_Read HVAC Sizing component. The outputs will indicate the peak heating/cooling loads of each zone (in Watts) as well as the size of each piece of HVAC equipment in the model. The next time that you are on a project that is about to value-engineer out an exterior shading system, use the workflow in the following example file to show that the client will probably end up paying for it with a more expensive HVAC system: Quantifying HVAC Sizing Impact of Shade.
Improved Memory Usage When Building Large Energy Models - As we take the capabilities of Honeybee to larger and larger models, many of us have begun to run up against a particular limitation of our machines: memory. After upgrading our machines to have 32 GBs of RAM, there was only one way left to alleviate the problem: restructure some of the code. Honeybee now uses an enhanced approach that ensures all the previous iterations of Honeybee objects will be removed from the memory once there is a change. In any case, the considerations of memory are definitely something that we intend to improve with the future Honeybee[+] plugin.
Workflow to Import gbXML Files - While GrizzlyBear has been around for several years, enabling us to export Honeybee zones to gbXML, we have gone for quite some time without a workflow to import gbXML files to Honeybee. The new Honeybee_gbXML to Honeybee component addresses this and establishes an easier path to import models from Revit into honeybee. You can read more about the component in this post.
Window Frame Capabilities Added to OpenStudio - After the implementation of LBNL THERM / WINDOW capabilities in the last two releases, there was one final bridge to build in the Honeybee workflow - fully connecting LBNL WINDOW to Honeybee’s OpenStudio workflow. This release of Honeybee will now write all FrameAndDivider objects exported from LBNL WINDOW glazing systems into the energy simulation, enabling you to account for the frame’s thermal bridging effects. As long as the construction is brought in with the Honeybee_Import WINDOW IDF Report component, the frames associated with the construction will be assigned to all windows that have the construction. Finally, it is worth noting that the current Honeybee will also write all glass spectral data as well as gas (or gas mixture) materials into the simulation. This means that essentially all properties of any IDF export that one makes from LBNL WINDOW can be factored into the OpenStudio energy simulation (with the only exception being BSDF materials).
OpenStudio Daylight Sensors Added - In our previous releases of Honeybee, the only means of correctly account for daylight sensors in an energy simulation was to run an annual daylight simulation and use the resulting schedules for the lighting in the energy simulation. However, this can take a lot of time and work to set up and run, particularly if the daylight control (at the end of the day) will be driven by just one sensor per room. Now, we have added another option, which uses OpenStudio/EnergyPlus’s built-in daylight controls. You can assign just a point and an illuminance target on the “Set Zone Thresholds” component and the lighting will be automatically adjusted in the course of the simulation. It should also be noted that the addition of daylight sensors has also coincided with the addition of blind/shade control based on glare. The same sensor point for daylight can be used to drive dynamic shades in the energy simulation based on glare experienced at this point. This example file shows how to set up daylight controls on the EnergyPlus model and check the lighting power results to see the effect.
Better Defaults for Natural Ventilation - After many good people wrote to me informing me that Honeybee overestimates natural ventilation airflow and I wrote back showing the way that I intended natural ventilation to be set up with the component, it dawned on me that I had selected some poor component defaults. Accordingly, this release includes a window-based natural ventilation option on the Set EP Airflow component that corrects for some of the common issues that I have seen. Insect screens are included by default and the component runs a general check to see if wind-driven cross ventilation is possible before auto-assigning it. The component will air on the side of more-conservative, lower airflow rates unless the user overrides the defaults. Finally, it’s worth noting that all of these changes have not affected the freedom of the Custom WindAndStack option on the component. The new defaults can be viewed in this example file.
CFD Results Can be Plugged into Microclimate Maps - In preparation for the (very soon) release of the Butterfly that connects to the OpenFOAM CFD platform, we just wanted to note that all of the microclimate map recipes can now take an input of a csv file with a matrix of CFD results for wind speed. For the time being, we have used these to produce very high-accuracy, high resolution maps of outdoor comfort. There will be more to follow soon!
We should also note that, in the last release I mentioned that we would be phasing out the EnergyPlus component so that all efforts are focused on the OpenStudio component. While I reiterate that all of the features of the EnergyPlus component are available in the OpenStudio component and I encourage everyone to use the OpenStudio component in order to take advantage of its HVAC capabilities, I have come to realize that many prefer to use the EnergyPlus component out of habit and have not yet gotten the time to understand why the OpenStudio component is an improvement over the EnergyPlus component. As a result, we have decided to leave the EnergyPlus component in place for the time being so that everyone has more time to understand this. The future Ladybug Analysis Tools platform will only interact with EnergyPlus through OpenStudio and so it is recommended that everyone use these two components in the Honeybee plugin will serve as an educational resource to understand our current path moving forward with OpenStudio.
Lastly, it is with great pleasure that we welcome Devang Chauhan and Byron Mardas to the developer team! As mentioned previously Devang has contributed several updates to the Ladybug Wind Rose in addition to finding and solving a multitude of bugs in other components. Byron has contributed code that has enabled the previously-mentioned stereographic sky projections along with a better method for running the Ladybug Sky Mask. Finally, Byron has contributed the Rhino Sun component, which allows you to coordinate your Rhino renders with your Ladybug data. Welcome to the Ladybug team, gentlemen!
As always let us know your comments and suggestions. Cheers!
Ladybug Analysis Tools Development Team…
e a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative.
I get that. That’s why that 3D shape I’m trying to apply the voronoi to was done in NX. I do wonder where the GUI metaphor GH uses comes from. It reminds me of LabVIEW.
"What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."
Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it.
It’s not the primary components that catalyzed this thought but rather the secondary components. I was toying with a component today (twist from jackalope) that made use of three toggle components. The things they controlled are checkboxes in other apps.
Take a look at this jpg. Ignore differences; I did 'em quickly. GH required 19 components to do what SW did with 4 commands. Note the difference in screen real estate.
As an aside, I really hate SolidWorks (SW). But going forward, I’ll use it as an example because it’s what most people are familiar with.
"[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."
Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.
I agree, and disagree. I believe parametric applies equally to GH AND SW, NX, and so forth, while algorithmic is unique to GH (and GC and Dynamo I think). Thus I understand why you prefer the term. I too tend to not like referring to GH as a parametric modeler for the same reason.
But I think it oversimplifies it to say parametric modelers move the clicks. SW tracks clicks the same way GH does; GH holds that information in geometry components while SW holds it in a feature in the feature tree. In both GH and SW edits to the base geometry will drive a recalculation, but more commonly, it’s an edit to input data, beit equations or just plain numbers, that drive a recalculation.
I understand the difference in these programs. What brought me to GH is that it can create a visual dialog that standard modelers can’t. But as I've grown more comfortable with it I’ve come to realize that the GUI of GH and the GUI of other parametric modelers, while looking completely different, are surprisingly interchangeable. Do not misconstrue that I’m suggesting that GH should replace it’s GUI with SW’s. I’m not. I refrain from suggesting anything specific. I only suggest that you allow yourself to think radically.
This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Given a choice, I'd pick kick-ass algorithmic modeller with no parametrics tacked on.
2. Visual Programming.
I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
I'll admit, this is a bit tough to explain. As I've re-read my own comment, I think it was partly a precursor to the context sensitivity point and touched upon other stated points.
This now touches upon my own ignorance about GH’s target market. Are you moving toward a highly specialized tool for programmers and/or mathematicians, or is the intent to create a tool that most designers can master? If it’s the former, rock on. You’re doing great. If it’s the latter, I’m one of the more technically sophisticated designers I know and I’m lost most of the time when using GH.
GH allows the same freedom as a command line editor. You can do whatever you like, and it’ll work or not. And you won’t know why it works or doesn't until you start becoming a bit of an expert and can actually decipher the gibberish in a panel component. I often feel GH has the ease of use of DOS with a badass video card in front.
Please indulge my bit of storytelling. Early 3D modelers, CATIA, Unigraphics, and Pro-Engineer, were unbelievably difficult to use. Yet no one ever complained. The pain of entry was immense. But once you made it past the pain threshold, the salary you could command was very well worth it. And the fewer the people who knew how to use it, the more money you could demand. So in a sense, their lack of usability was a desirable feature among those who’d figured it out.
Then SolidWorks came along. It could only do a fraction of what the others did, but it was a fraction of the cost, it did most of what you needed, and anyone could figure it out. There was even a manual on how to use it. (Craziness!) Within a few short years, the big three all had to change their names (V5, NX, and Wildfire (now Creo)) and change the way they do things. All are now significantly easier to use.
I can tell that the amount of development time that’s gone into GH is immense and I believe the functionality is genius. I also believe it’s ease of use could be greatly improved.
Having re-read my original comments, I think it sounded a bit snotty. For that I apologize.
3. Context sensitivity.
"There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."
Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?
I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal [...] is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.
You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
You bring up both interesting points and limits to my understanding of coding. I’ve reached the point in my learning of GH where I’m just getting into figuring out the sets tab (and so far I’m not doing too well). I often find myself wondering “Is all of this manual conditioning of the data really necessary? Doesn’t most software perform this kind of stuff invisibly?” I’d love to be right and see it go away, but I could easily be wrong. I’ve been wrong before.
5. Components.
"Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."
I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data.
I kinda like this. It’s a continuation of what you’re currently doing with things like the panel component.
"Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"
It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
6. Integration.
"Why isn't it just live geometry?"
This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry.
"Maybe add more Rhino functionality to GH. GH has no 3D offset."
That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).
On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
You work for McNeel yet you seem to speak of them as a separate entity. Is this to say that there are technical reasons GH can only access things through the Rhino SDK? I’d think you would have complete access to all Rhino API’s. I hope it’s not a fiefdom issue, but it happens.
7. Documentation.
Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.
Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
It begs the question that I have to ask. When is GH1.0 scheduled to launch? And if you need another person to proofread the current draft of new primer.
patrick@girgen.com
I can’t believe wikipedia has an entry for feature creep. And I can’t believe you included it. It made me giggle. Thanks.
8. 2D-ness.
"I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"
I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
I believe it’s been helpful for me to have figured this out. I recently completed a GH course at a local Community College and have done a bunch of online tutorials. The first real project I decided to tackle has turned out to be one of the more difficult things to try. It’s the source of the questions I posted. (Thanks for pointing out that they were posted in the wrong spot. I re-posted to the discussions board.)
I just can't seem to figure out how to turn the voronoi into legitimate geometry. I've seen this exact question posted a few times, but it’s never been successfully answered. What I'm showing here is far more angular than I’m hoping for. The mesh is too fine for weaverbird to have much of an effect. And I haven't cracked re-meshing. Btw, in product design, meshes are to be avoided like the plague. Embracing them remains difficult.
As for offsetsurf, in Rhino, if you do an offsetsurf to a solid body, it executes it on all sides creating another neatly trimmed body thats either larger or smaller than the original. This is how every other app I know of works. GH’s offsetsurf creates a bunch of unjoined faces spaced away from the original brep. A common technique for 3D voronois (Yes, I hit the voronoi overuse easter egg) is to find the center of each cell and scale them by this center. If you think about it, this creates a different distance from the face of the scaled cell to the face of the original cell for every face. As I've mentioned, this project is giving me serious headaches.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
Thank you for taking the time to reply David. Often we feel that posting such things is send it into the empty ether. I’m very glad that this was not the case.
And thank you for all of the work you've put into GH. If you found any of my input overly harsh or ill-mannered, I apologise. It was not my intent. I'm generally not the ranting sort. If I hadn't intended to provide possibly useful input, I wouldn't have written.
Cheers
Patrick Girgen
Ps. Any pointers on how to get a bit further on the above project would be greatly appreciated.
…