points (which increases the smoothness of the medial axis, and hence the accuracy of the output mesh), spikes appear in the voronoi diagram as shown below.
For reference the point spacing along the input curve is 0.2mm, and the extension of the overlapping cells is about 8mm
I have compared this result with the only other Voronoi implementation i could find in GH which is from SmartForm. SmartForm SMART Voronoi does not produce this error, however it is exponentially slower, taking approx 11 minutes compared to 2.5 seconds for the native component.
Is this a known problem with the accuracy of the GH Voronoi implementation? I have tried this with various Units settings in the RhinoDoc, with no change.
Any ideas?
Are there any other fast + accurate Voronoi implementations out there?
example file is attached. Note that it requires SmartForm, but will show the error without it.
Thanks :)…
d the workshop PDF from this link: http://goo.gl/bcvRNH Download event poster from this link: http://goo.gl/Q0KWCM Brief: Cairo is filled with barriers controlling people movements, suppressing them as well as detaining green and public spaces to the extent that most people have been taking these spaces for granted. Public spaces have been for a while the periphery of our daily life. We will explore in this workshop how we can manipulate and alter people’s perception and direct their attention to how these spaces are integral for city life. This exploration will be backed up by intensive technical tutorials introducing computational design and fabrication techniques and tools mainly Rhino, Grasshopper, Geco and Ecotect. Not only will this be the typical technical workshop, but rather you will also have the chance to be guided step by step on how these tools are used through out different design stages in a real world scenario. Design prototypes will be produced through 3D printing, the main workshop output will be a fabricated one to one functional model for one of the designs using our new in-house CNC machine. Tutors (check the PDF for bio): Olga Kovrikova, MArch DIA Alexandr Kalachev, MArch DIA Karim Soliman, MArch DIA Islam Ibrahim, MArch DIA Sherif Tarabishy, B.Sc. AAST Application: Application deadline 1 September 2013 ** For students (undergrad / Master), teachers and PhD proof of status is required (university ID with a date or a certificate of enrollment) to apply for the students package. Packages (choose one of the following in the application form): 1. Standard registration Course fee is 4250 EGP For Students 3500 EGP 2. Early bird registration discounted fee For Professionals 3750 EGP For Students 3000 EGP ** Early bird offer ends on 14 August 2013 3. Group registrations discounted fee (5 or more) For Students 20% off - You will have to fill out an application form here: http://goo.gl/0QxAga - You will need to submit your CV and Short Portfolio (max. 10 MB) to info@morph-d.com, email subject: “Morphing Norms Application” (we will decide if you are eligible for an early bird discount or not based on the date of your email submission) - We will confirm receiving emails from all applicants. Successful applicants will be contacted 5 days after each deadline (early bird/final) and will have to confirm participation within 3 days, if they fail to do so, places will be given to others on the waiting list. - A maximum of 30 applicants will be selected.
…
as one element.
Thank you
Comment by karamba on October 7, 2014 at 11:27pm
Hello Patricio, divide the beams in such a way that each boundary vertex of the shell becomes an endpoint of a beam segment.
Best, Clemens
Comment by Llordella Patricio on October 8, 2014 at 8:30amDelete Comment
Hi Clemens,
I did what you suggested but now assemble element doesn´t work properly. Could you please tell me how to fix it? Thanks in advance, Patricio
8-10-14losa%20cadena.gh
Comment by karamba on October 8, 2014 at 11:59am
Hi Patricio, if you flatten the 'Elem'-input at the 'Assemble'-component the definition works. The triangular shell elements have linear displacement interpolations whereas the beam deflections are exact. In order to get correct results you should refine the shell mesh.
Best, Clemens
Comment by Llordella Patricio on October 9, 2014 at 8:35amDelete Comment
Hello, succeeds in creating the mesh to the slab, and built the beam segment, but when I see the deformations are not expected because the beam is deformed as the slab.
Thanks for the help
PS: maybe I'm using the program for a type of structure that is not the most appropriate, as I saw in the examples of other structures. But this type of structure is that students taught
best regards
Patricio
9-10-14%20Example%201.gh
Comment by karamba on October 9, 2014 at 10:46am
You could use the 'Mesh Edges'-component to retrieve the naked edges and turn them into beams - see attached file:91014Example1_cp.gh
Best regards,
Clemens
Comment by Llordella Patricio on October 15, 2014 at 3:41pmDelete Comment
Dear clemens
I was doing a rough estimate of the deformation, and I can not achieve the same result with Karamba. When I make a rough estimate of the result with Karamba beams and mine are very similar, I think the problem is when I connect the shell, because there are no similar results.
I sent the GH file, and an image of the calculation
The structure is concrete The result I get is 0.58cm
thank youPatricio
15-10-14%20Example.gh
Comment by karamba yesterday
Dear Patricio,
try to increase the number of shell elements. As mentioned in the manual they are linear elements. A mesh that is too coarse leads to a response which is stiffer than the real structure.
Best,
Clemens
…
sando las nuevas tecnologías de la información en la arquitectura para la gestión del conocimiento de sistemas que desarrollen estructuras sustentables, desde los procesos de diseño generativos o algorítmicos. Donde se contempla la P.O.O. (programación orientada a objetos) como nuevo lenguaje de expresión para el arquitecto-diseñador en el siglo XXI.Los talleres están pensados para sigan un hilo conductual en el que al mismo tiempo que se enseña se investiga y experimenta. Por primera vez se contará con diversos miembros de SEED como docentes de forma presencial y por video conferencia, logrando de esta forma acercar a los especialistas que se encuentran en Europa a los asistentes de los talleres sin encarecer los costos.+info:http://www.studioseed.net/ adn-methodology/
Los talleres están dirigidos a personas que tengan o quieran conseguir un perfil alto de innovación, creatividad, flexibilidad: profesionales con actividades de dirección, gerencia, proyectistas, investigadores, así como a estudiantes a partir de 5to semestre en adelante. Cada taller abarca perfiles diversos de profesionales, mientras unos están más orientados a directivos y gerencias, otros más a proyectistas.
LOS TALLERES:FAB DIG I / ITESM – CEM / Estado de México / 20 hrs / 8 – 11 al de diciembre 2011 (En este taller no se aplican descuentos ni becas)PARAMETRIC GREEN HOUSING / Colegio de Arquitectos del estado de Jalisco (Por confirmar Sede) / Guadalajara / 20h + 5h proyecto / 30 enero 2012 al 4 de diciembre 2012FAB DIG II / ITESM – CEM / Estado de México / 30h + 5h proyecto / 8 a 12 febrero 2012TERCERA REVOLUCIÓN INDUSTRIAL: TIC`s + SOSTENIBILIDAD. Procesos y paradigmas emergentes / Querétaro / 20 hrs / 15 al 18 de febrero 2012INTRODUCCIÓN AL DISEÑO GENERATIVO / UAM-azc / DF / 8hrs / 13, 14 de enero (Costo representativo $650, máximo 40 personas, mínimo 15 personas)INTRODUCCIÓN A: SCRIPTING CON GRASSHOPPER ( Python) Y PLUGINS / Estudio SEED México / Estado de México / 30 hrs / 23, 24, 25 febrero y 1,2, 3 de marzo 2012…
Added by SEED studio at 3:30am on November 24, 2011
our own, understand third-party tutorials and process to the advanced sessions.
register for 29€/3hrs
GMT: SAT, 13 DEC 2014 @ 3:00PM / 29€
Introduction to vectors, vectors vs. points, vector addition, cross product, dot product, vector operations, vector display, practical use, planes/frames, normals.
Introduction to domains, t parameter, evaluate curve, boundaries, remap, reparametrize, UV coordinates, evaluate surface.
GMT: SUN, 14 DEC 2014 @ 3:00PM / 29€
Introduction to data trees, graft, flatten, unflatten, tree statistics, cherry picker, simplify, shift path, path mapper, tree item, tree items.
WEBINARS
The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials. The rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. All sessions are held entirely in English.
PAST EVENTS
…
Added by Jan Pernecky at 2:27am on December 11, 2014
a nodi, permette di sfruttara le potenza della programmazione, senza necessariamente avere competenze avanzate.
Con Grasshopper potrete avere accesso ai segreti della modellazione generativa, un nuovo linguaggio progettuale che sta cambiando il mondo del design, a partire dalla gioielleria, fino ad arrivare all'architettura.
Durante il corso sarà possibile comprendere le caratteristiche di funzionamento del programma e applicarlo alla creazione di oggetti complessi che potranno essere stampati in 3D, oppure renderizzati. La durata è di 30 ore e alla fine del percorso verrà rilasciato il certificato McNeel.
Il Programma
Il corso spiega i concetti base di modellazione parametrica e generativa. Nello specifico:
Interfaccia e comandi
Parametri e componenti
Interopazione con Rhinoceros
Strumenti di parametrizzazione
Combinazione dati
Data tree
Creazioni di superfici attraverso algoritmi di paneling
Teoria degli attrattori
Gestione strumenti mesh
Creazione di Cluster
Durante il corso saranno proposte esercitazioni pratiche sul campo di utilizzo preferito dallo studente
Il docente
Antonino Marsala, è un formatore certificato McNeel con alle spalle oltre 11 anni di esperienza nel settore della modellazione 3D. Oltre ad occuparsi di formazione, collabora con aziende orafe e di architettura per la messa in pratica dei principi di modellazione generativa, applicandoli a casi reali.
FAQ
Quanto costa il corso?
Il prezzo del corso è di 500,00 € + IVA che potranno essere saldati in una soluzione unica. Nel caso di iscrizione di gruppo, potrà essere applicato uno sconto.
Cosa posso portare e cosa non devo portare all'evento?
Gli organizzatori forniranno computer con il software già installato. Nel caso vogliate portare il vostro computer, vi forniremo una versione trial da 90giorni di Rihnoceros e Grasshopper
Dove posso contattare l'organizzatore per qualsiasi domanda?
antonio@mandarinoblu.com
334 24 20 203
La mia registrazione o il mio biglietto è trasferibile?
Si, purchè venga comunicato il cambiamento entro 48 ore dalla partena del corso
…
imilar topic with a Windows 10 user, which successfully fixed this issue.If you are tiny little patient, I think we can try the same steps in your Windows 7 case.For start, try these three steps:1) Close Rhino. Restart your PC. 2) Once the PC boots up, double click on the "regMapWinGIS.cmd" file in "MapWinGIS" installation folder.3) When it closes the Command Prompt window it opened, try running Rhino, Grasshopper and drop the "Gismo Gismo" component on the canvas (Grasshopper working area).If this does not help (you get the same COM class factory CLSID error message coming out from the "Gismo Gismo" component), then try the following steps, one by one:
1) Close Grasshopper and Rhino2) Run the Revo Uninstaller Pro and uninstall your MapWinGIS application along with removing all the leftovers from the registry. You can download 30 days trial version of it from here. Here is a youtube example of a bit older Revo Uninstaller. But the important part is that is shows how registry leftovers are removed.3) Restart your PC, and once it boots again, make sure that you are logged in as an Adminstrator!4) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".5) Turn off your Antivirus, which ever it is.6) Download the 64 bit version of v4.9.4.2 MapWinGIS.7) Right click on downloaded MapWinGIS-only-v4.9.4.2-x64.exe file, and choose "Properties". If there is "Unblock" button click on it, and then click on "OK". If there is no "Unblock" button, just click on "OK".8) Left double click on MapWinGIS-only-v4.9.4.2-x64.exe file and install it to "C:\dev\MapWinGIS" folder. Choose "Full installation" during installation process!9) In your Start menu's search box type: "CMD". Once the "Command prompt" appears do not left click on it! Instead right click on it, and choose "Run as Administrator".10) A command prompt window will open. Type the following command:
"your_regsvr32_folder_path\regsvr32.exe" /u /s c:\dev\mapwingis\mapwingis.ocx
If command does not result in an error message, then type this one afterwards:
"your_regsvr32_folder_path\regsvr32.exe" /s c:\dev\mapwingis\mapwingis.ocx
11) If no error appeared again, then open your Rhino and Grasshopper and check what "Gismo Gismo" component prints from its "readMe!" output.If errors appeared, please post their screenshots. Thank you in advance.
Please accept my apologies for the large number of steps. Some of them are quite simple actually (click on this, download that...).…
Added by djordje to Gismo at 12:58pm on November 28, 2017
ly 26-27-28-29 (digital fabrication)
The third edition of digitalMed Workshop is structured as a design laboratory. Participants will learn the challenging process of producing ideas, projects and research analysis that are to be developed through specific software and concepts that emerge through the use of mapping, parametric design and digital fabrication.
The workshop will take place in the city of Salerno (Italy) and it will last 11 days structured into 3 intensive weekends: July 13-14-15 (mapping); July 19-20-21-22 (parametric design); July 26-27-28-29 (digital fabrication).
Goals and Objectives:
We aim to make clear the theoretical and technical knowledge in the approach to parametric and generative design and digital fabrication. (From collection and data management, to the manner in which these inform the geometries, to the fabrication of prototypes.)
Participants will also have the opportunity to practice the new knowledge gained in the design laboratory through project work.
Project Theme:
"Urban Field" Identify, study and analyze the system of public spaces in the urban area of the city of Salerno.
Connection, mutation, generation and evolution are the themes to be followed in project work.
Brief Description of Topics:
- Mapping. Our reality, in all its forms, has studied through concepts of the theory of Complex Systems. The techniques that will be used to study events and places of reality, will work for the management, manipulation and visualization of data and information. These will form the basis for project management and driven geometry, conducted during the second phase of the workshop.
- Parametric Design. Introduction to Rhino* and Grasshopper. Specifically, we will explain the concepts with which to work with the software of parametric design and how they function. Through these tools, we will arrive at the definition of systems of mathematical and / or geometrical relationships that are able to generate and govern patterns, shapes and objects that will inform the final design.
- Digital Fabrication. In this phase, participants of the workshop are organized into working groups. Participants have access to materials and conceptual apparatus that will take them directly to the fabrication of the geometries of the project, with the use of software CAD / CAM interface and the use of machines for the digital fabrication.
The DigitalMed workshop is organized by Nomad AREA (Academy of Research & Training in topics of Contemporary Architecture), in collaboration with the City of Salerno, the Order of Architects Province of Salerno and the National Institute of Architecture In / Arch - Campania.
Interested parties may download the Notice of Competition at the address www.digitalmedworkshop.com and fill the pre-registration no later than July 10th 2012.
PRESS OFFICE
Dr. Francesca Luciano
328 61 20 830
fra_luciano@libero.it
For information or subscriptions:
e-mail: info@digitalmedworkshop.com - tel: 089 463126 - 3391542980 …
gh, when I bake, the geometry suddenly exists in rhino.
Second, I can seem to figure out how to set default numeric values in the component.
Protected Overrides Sub RegisterInputParams(pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager)
pManager.AddPointParameter("Focal Point", "FP", "The focal point", GH_ParamAccess.item)
pManager.AddNumberParameter("Focal Point Horiz Dist", "D", "Focal point distance from performance boundary", GH_ParamAccess.item)
pManager.AddNumberParameter("Focal Point Height", "H", "Focal point height above performance boundary", GH_ParamAccess.item)
pManager.AddPointParameter("First Row Start Point", "FR", "Location of first row in tiered seating", GH_ParamAccess.item)
pManager.AddNumberParameter("First Row Horiz Dist", "FRD", "First row distance from performance boundary", GH_ParamAccess.item)
pManager.AddNumberParameter("First Row Height", "FRH", "First row height above performance boundary", GH_ParamAccess.item)
pManager.AddNumberParameter("C Value", "C", "C value", GH_ParamAccess.item)
pManager.AddNumberParameter("Row Width", "RW", "Row width", GH_ParamAccess.item)
pManager.AddIntegerParameter("Number of Rows", "RN", "Number of Rows", GH_ParamAccess.item)
pManager.AddIntegerParameter("Construction Tolerance", "CT", "Construction Tolerance: 1=1in, 2=1/2in, 4=1/4in, 8=1/8in", GH_ParamAccess.item)
pManager.AddNumberParameter("Max Riser Height", "MR", "Maximum riser height allowed", GH_ParamAccess.item)
pManager.AddGeometryParameter("Spectator", "S", "Seated/Standing spectator", GH_ParamAccess.item)
End Sub
Protected Overrides Sub RegisterOutputParams(pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager)
pManager.AddLineParameter("Sightlines", "SL", "Sightlines", GH_ParamAccess.list)
pManager.AddLineParameter("C Value", "CL", "Line represents C value height", GH_ParamAccess.list)
pManager.AddLineParameter("Ground Line", "GL", "Ground Line", GH_ParamAccess.list)
pManager.AddLineParameter("Tier tread", "TR", "Line represents tier treads", GH_ParamAccess.list)
pManager.AddLineParameter("Risers", "RI", "Line represents risers", GH_ParamAccess.list)
pManager.AddGeometryParameter("Spectators", "SP", "Seated Standing Spectators", GH_ParamAccess.list)
End Sub
Protected Overrides Sub SolveInstance(DA As IGH_DataAccess)
Dim newLine As New List(Of Line)
Dim newCValue As New List(Of Line)
Dim rowWidthLineList As New List(Of Line)
Dim floorLineList As New List(Of Line)
Dim riserLineList As New List(Of Line)
Dim leghtList As New List(Of String)
Dim newSeated As New List(Of GeometryBase)
Dim inputPoint As Point3d
If (Not DA.GetData(0, inputPoint)) Then Return
Dim viewPointY As Double
If (Not DA.GetData(1, viewPointY)) Then Return
Dim viewPointZ As Double
If (Not DA.GetData(2, viewPointZ)) Then Return
Dim firstRowPoint As Point3d
If (Not DA.GetData(3, firstRowPoint)) Then Return
Dim firstRowY As Double
If (Not DA.GetData(4, firstRowY)) Then Return
Dim firstRowZ As Double
If (Not DA.GetData(5, firstRowZ)) Then Return
Dim cValue As Double
If (Not DA.GetData(6, cValue)) Then Return
Dim rowWidth As Double
If (Not DA.GetData(7, rowWidth)) Then Return
Dim numberOfRows As Integer
If (Not DA.GetData(8, numberOfRows)) Then Return
Dim M As Integer
If (Not DA.GetData(9, M)) Then Return
Dim maxHeight As Double
If (Not DA.GetData(10, maxHeight)) Then Return
Dim seated As GeometryBase
If (Not DA.GetData(11, seated)) Then Return
Call addNewRow(newLine, newCValue, inputPoint, viewPointY, viewPointZ, firstRowPoint, firstRowY, firstRowZ, cValue, numberOfRows, rowWidth, rowWidthLineList, floorLineList, riserLineList, M, maxHeight, seated, newSeated)
DA.SetDataList(0, newLine)
DA.SetDataList(1, newCValue)
DA.SetDataList(2, rowWidthLineList)
DA.SetDataList(3, floorLineList)
DA.SetDataList(4, riserLineList)
DA.SetDataList(5, newSeated)
End Sub
Public Sub addNewRow(---constructor----)
---additional code----
end Sub…