mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
a modélisation paramétrique avec Grasshopper pour Rhinoceros3D ainsi que démontrer plusieurs façons de l’appliquer à votre travail architectural.
Cette formation est conçue comme une expérience augmentée autour de l’architecture paramétrique et elle comprend aussi :
+ Une introduction au design paramétrique par Francesco Cingolani+ Une étude de cas d’un projet de l’agence de l’agence HDA Hugh Dutton Associés+ Acces gratuit 3 journées à l’espace de coworking SUPERBELLEVILLE
INSTRUCTEURS
FRANCESCO CINGOLANI . designer, enseignant en architecture paramétrique, co-fondateur deSUPERBELLEVILLE coworking, collaborateur de l’agence Hugh Dutton Associés. – voir le profil Linked-in
ŞULE ERTÜRK . Architecte diplômée de l’Université Yildiz Teknik à Istanbul, Master en architecture paramétrique, travaille actuellement aux Ateliers Jean Nouvel dans le département 3D. - voir le profil Linked-in
QUENTIN GAUCHER . Architecte DE-HMONP, diplômé de l’ENSA Paris La Villette, intervenant en architecture paramétrique sur divers projets - voir le profil Linked-in
DATES 25 mars 2013 . Annonce de la formation / Début des inscriptions5 avril 2013 . Fin des inscriptions13 – 14 avril 2013 . Formation
HORAIRES Samedi et Dimanche 13 et 14 avril . 10:00 > 13:00 – 14:00 > 19:00Total : 16 heures
TARIF700 € professionnels400 € étudiants
RÈGLEMENT50% est à régler lors de l’inscription (au plus tard le 5 avril)50% au début de la formation.Les règlements s’effectuent par carte bancaire via Paypal ou par virement bancaire.
NOMBRE DE PARTICIPANTSMinimum pour l’activation de la formation : 5Maximum : 7
CONTACTInscriptions et réglements : fr.cingolani@gmail.com . SUPERBELLEVILLE coworkingInformations : quentin.gaucher@gmail.comimmaginoteca.com/grasshopper
EN BONUSLe café italien et les plats faits maison de Claudia offerts aux participants :)…
ll-Facade using Rhino and Grasshopper Participants will learn; Rhinoceros Grasshopper Advanced Parametric Design Brick Formations and Explorations Shadow-Design Relationship
Session 2: Advanced Digital Modeling for Additive Manufacturing (3D Printing) Participants will learn; How to prepare a 3D design to 3D Printing process in Rhinoceros Advanced Methods for 3D Print optimisation for time and cost effective production 3D Printing software education Cura
INFO
Date Saturday, 28 September 2019 Schedule 9:30am – 2:30pm (Session 1) | 2:45pm – 7:00pm (Session2) Venue (TBC) Pada Labs, Istanbul Language English/Turkish Softwares Rhinoceros Grasshopper 3D Cura Participants will need to bring their own laptops with software installed; other plugins will be distributed at the workshop. Prerequisites All tutorials are open to beginner level. No previous knowledge of Cura and Grasshopper needed. Basic knowledge of Rhinoceros recommended. Participation The workshop is limited to the first 20 applicants. Each student will receive a certificate of participation. Prices for each session: (You can pick one and attend one) Special Early registration (Deadline 1 August ) Students 310 TL Professionals 400 TL Regular registration Students 390 TL Professionals 480 TL Prices for Session 1&2 Combined: (Full Day) Special Early registration (Deadline 1 August ) Students 540 TL Professionals 690 TL Regular registration Students 620 TL Professionals 790 TL DISCOUNTS Group registration of 3 or more people will get a 15% discount. * Previous Pada workshop students will get a 10% discount. DIRECTOR Begum Aydinoglu, M.Arch AA DRL will be instructing and directing the following workshops. REGISTRATION: Email to pada.workshops@gmail.com for registration instructions. Please note that we have limited seats and there won't be any exceptions. …
his comes in the form of an HTML page with links to every component, so you will need to view it in your web browser. (I use Chrome and it doesn't seem to be working correctly, but when opened in IE its fine.)
2) Included in each help topic for each component is the Inputs and Outputs descriptions and data types.
3) You supply the data. What you supply and how you supply it is for you to decide. There are umpteen different ways. Are you asking for a list of those ways for each input?
4) Points can either be Rhino objects or 3D co-ordinates. To create a point you can use any of these methods, but it mostly comes down to user preference. I like using Panels as this displays outside of the component.
5) Because of the nature of vectors they represent magnitude and direction but they don't have an independent location, so there is a component that will display vectors in Rhino.
6) The user.
7) There is a Primer on the front page. Here you find the Basics, but because GH is ever evolving in its current beta state you might find things that aren't relevant any more or simply don't work the same. And here is the reason why nobody is writing an update because it could be soon out of date.
8) Importing images by either dragging them from explorer onto the canvas or right click context menu Image...
9) Single line = Single Item of Data. Double line = Multiple items of data on the same Branch. Dashed Double Line = Multiple Data on Multiple Branches.
10) User preference
11) Toolbar management is probably the bane of David's life. Most things are logically placed. For example the Curve Tab, Primitives are any simple curve types that you are creating from scratch. Similarly Splines is for more complex curve types created from scratch. Analysis is where you find components that are finding answers supplied by curves, control points, curvature, parameters, end points etc. Division is a subset of this category but has a group of its own. And Utilities is where you find curve related actions that you want to perform, offsetting, rebuilding projecting, exploding etc.
12) I would image it would have been the Point On Curve component in Curve>Analysis. Why that group? You are not putting a point on a curve you are analysing a curve for the location of a point based on some parameters that you are supplying. For example "what is the mid point?"
I hope this goes some way towards answering you questions. No doubt this will have generated more so don't be afraid to ask, it took me several releases of Explicit History (aka Grasshopper) before I realised what the egg did, it never occurred to me that I could put my objects into Rhino when I was finished. Or the fact that I could use panels to 'see' data outputs.
Al the best,
Danny…
Added by Danny Boyes at 3:48am on December 9, 2010
should follow the instruction which mostapha has wrote in https://github.com/mostaphaRoudsari/ladybug/blob/master/resources/I...
Instructions for Installing Ladybug + Honeybee: (Follow steps 1-6 for basic functionality and 1-11 for full functionality) 0. If you have an old version of LB+HB, download the file here (https://app.box.com/s/ds96em9l6stxpcw8kgtf) and open it in Grasshopper to remove your old Ladybug and Honeybee version. 1. Make sure that you have a working copy of both Rhino and Grasshopper installed. 2. Open Rhino and type "Grasshopper" into the command line (without quotations). Wait for grasshopper to load. 3. Install GHPython by downloading the file at this link (http://www.food4rhino.com/project/ghpython?ufh) and drag the .gha file onto the Grasshopper canvas. 4. Select and drag all of the files in the "userObjects" folder (downloaded with this instructions file) onto your Grasshopper canvas. You should see Ladybug and Honeybee appear as tabs on the grasshopper tool bar. (If you are reading this instruction on github you can download them from http://www.food4rhino.com/project/ladybug-honeybee) 5. Download the files at this link (https://app.box.com/s/bh9sbpgajdtmmystv3n4), unzip them and copy the contents to both C:\ladybug and C:\Users\[yourUsername]\AppData\Roaming\Ladybug. 6. Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. For Honeybee, continue to the following: 7. Install Radiance to C:\Radiance by downloading it from this link (https://github.com/NREL/Radiance/releases/download/4.2.2/radiance-4...) and running the exe. 6. Install Daysim to C:\DAYSIM by downloading it at this link (http://daysim.ning.com/page/download) and running the exe. 8. Install Energy Plus 8.1 to C:\EnergyPlusV8-1-0 by going to the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/energyplus_downlo...), making an account, going to "download older versions of EnergyPlus, selecting 8.1 and running the exe. 9. Copy falsecolor2.exe (http://pyrat.googlecode.com/files/falsecolor2.exe) and evalglare.exe (http://www.ise.fraunhofer.de/en/downloads-englisch/software/evalgla...) to C:\Radiance\bin 10. Download the OpenStudio Libraries (https://app.box.com/s/y2sx16k98g1lfd3r47zi) and unzip them to C:\ladybug\OpenStudio. 11. You now have a fully-working version of Ladybug + Honeybee. Get started visualizing weather data with these video tutorials (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDX...).
It works for me..
Agus…
is set up to manipulate strings into an STL file that is quite different from how Grasshopper defines meshes, in that an STL seems to define each face by XYZ points, Grasshopper wants a single list of all vertex points and then has an allied lists of topological connectivity according to vertex number, so for now I just hacked it to spit out points minus so many duplicates it generates for STL:
Right now it has an internal 3D trigonometric function I added input sliders to control, that creates surfaces that look a lot like molecular orbitals.
So how do I make a mesh? I failed to make a single mesh face from each STL face since AddMesh seems to want a list, so I tried making a single list and matching it with a simple ((1,2,3),(4,5,6),(7,8,9)...) array of connectivity but it hasn't worked yet since the STL list of vertices has duplicates that won't work for Grasshopper and removing the duplicates scrambles the connectivity relation.
After some work on this and seeing the output, I figure I could just randomly populate the mathematical function with points instead, unless it really gives a better mesh result than other routines. I'm not sure what to do with it yet, even if I get the mesh figured out.
import rhinoscriptsyntaximport RhinoPOINTS_CONTAINER =[]POINTS = []class Vector: # struct XYZ def __init__(self,x,y,z): self.x=x self.y=y self.z=z def __str__(self): return str(self.x)+" "+str(self.y)+" "+str(self.z) class Gridcell: # struct GRIDCELL def __init__(self,p,n,val): self.p = p # p=[8] self.n = n # n=[8] self.val = val # val=[8] class Triangle: # struct TRIANGLE def __init__(self,p1,p2,p3): self.p = [p1, p2, p3] # vertices # HACK TO GRAB VERTICES FOR PYTHON OUTPUT POINTS_CONTAINER.append( (p1.x,p1.y,p1.z) ) POINTS_CONTAINER.append( (p2.x,p2.y,p2.z) ) POINTS_CONTAINER.append( (p3.x,p3.y,p3.z) )# return a 3d list of values def readdata(f=lambda x,y,z:x*x+y*y+z*z,size=5.0,steps=11): m=int(steps/2) ki = [] for i in range(steps): kj = [] for j in range(steps): kd=[] for k in range(steps): kd.append(f(size*(i-m)/m,size*(j-m)/m,size*(k-m)/m)) kj.append(kd) ki.append(kj) return ki from math import sin,cos,exp,atan2 def lobes(x,y,z): try: theta = atan2(x,y) # sin t = o except: theta = 0 try: phi = atan2(z,y) except: phi = 0 r = x*x+y*y+z*z ct=cos(PARAMETER_A * theta) cp=cos(PARAMETER_B * phi) return ct*ct*cp*cp*exp(-r/10) def main(): data = readdata(lobes,10,40) isolevel = 0.1 #print(data) triangles=[] for i in range(len(data)-1): for j in range(len(data[i])-1): for k in range(len(data[i][j])-1): p=[None]*8 val=[None]*8 #print(i,j,k) p[0]=Vector(i,j,k) val[0] = data[i][j][k] p[1]=Vector(i+1,j,k) val[1] = data[i+1][j][k] p[2]=Vector(i+1,j+1,k) val[2] = data[i+1][j+1][k] p[3]=Vector(i,j+1,k) val[3] = data[i][j+1][k] p[4]=Vector(i,j,k+1) val[4] = data[i][j][k+1] p[5]=Vector(i+1,j,k+1) val[5] = data[i+1][j][k+1] p[6]=Vector(i+1,j+1,k+1) val[6] = data[i+1][j+1][k+1] p[7]=Vector(i,j+1,k+1) val[7] = data[i][j+1][k+1] grid=Gridcell(p,[],val) triangles.extend(PolygoniseTri(grid,isolevel,0,2,3,7)) triangles.extend(PolygoniseTri(grid,isolevel,0,2,6,7)) triangles.extend(PolygoniseTri(grid,isolevel,0,4,6,7)) triangles.extend(PolygoniseTri(grid,isolevel,0,6,1,2)) triangles.extend(PolygoniseTri(grid,isolevel,0,6,1,4)) triangles.extend(PolygoniseTri(grid,isolevel,5,6,1,4)) def t000F(g, iso, v0, v1, v2, v3): return [] def t0E01(g, iso, v0, v1, v2, v3): return [Triangle( VertexInterp(iso,g.p[v0],g.p[v1],g.val[v0],g.val[v1]), VertexInterp(iso,g.p[v0],g.p[v2],g.val[v0],g.val[v2]), VertexInterp(iso,g.p[v0],g.p[v3],g.val[v0],g.val[v3])) ] def t0D02(g, iso, v0, v1, v2, v3): return [Triangle( VertexInterp(iso,g.p[v1],g.p[v0],g.val[v1],g.val[v0]), VertexInterp(iso,g.p[v1],g.p[v3],g.val[v1],g.val[v3]), VertexInterp(iso,g.p[v1],g.p[v2],g.val[v1],g.val[v2])) ] def t0C03(g, iso, v0, v1, v2, v3): tri=Triangle( VertexInterp(iso,g.p[v0],g.p[v3],g.val[v0],g.val[v3]), VertexInterp(iso,g.p[v0],g.p[v2],g.val[v0],g.val[v2]), VertexInterp(iso,g.p[v1],g.p[v3],g.val[v1],g.val[v3])) return [tri,Triangle( tri.p[2], VertexInterp(iso,g.p[v1],g.p[v2],g.val[v1],g.val[v2]), tri.p[1]) ] def t0B04(g, iso, v0, v1, v2, v3): return [Triangle( VertexInterp(iso,g.p[v2],g.p[v0],g.val[v2],g.val[v0]), VertexInterp(iso,g.p[v2],g.p[v1],g.val[v2],g.val[v1]), VertexInterp(iso,g.p[v2],g.p[v3],g.val[v2],g.val[v3])) ] def t0A05(g, iso, v0, v1, v2, v3): tri = Triangle( VertexInterp(iso,g.p[v0],g.p[v1],g.val[v0],g.val[v1]), VertexInterp(iso,g.p[v2],g.p[v3],g.val[v2],g.val[v3]), VertexInterp(iso,g.p[v0],g.p[v3],g.val[v0],g.val[v3])) return [tri,Triangle( tri.p[0], VertexInterp(iso,g.p[v1],g.p[v2],g.val[v1],g.val[v2]), tri.p[1]) ] def t0906(g, iso, v0, v1, v2, v3): tri=Triangle( VertexInterp(iso,g.p[v0],g.p[v1],g.val[v0],g.val[v1]), VertexInterp(iso,g.p[v1],g.p[v3],g.val[v1],g.val[v3]), VertexInterp(iso,g.p[v2],g.p[v3],g.val[v2],g.val[v3])) return [tri, Triangle( tri.p[0], VertexInterp(iso,g.p[v0],g.p[v2],g.val[v0],g.val[v2]), tri.p[2]) ] def t0708(g, iso, v0, v1, v2, v3): return [Triangle( VertexInterp(iso,g.p[v3],g.p[v0],g.val[v3],g.val[v0]), VertexInterp(iso,g.p[v3],g.p[v2],g.val[v3],g.val[v2]), VertexInterp(iso,g.p[v3],g.p[v1],g.val[v3],g.val[v1])) ] trianglefs = {7:t0708,8:t0708,9:t0906,6:t0906,10:t0A05,5:t0A05,11:t0B04,4:t0B04,12:t0C03,3:t0C03,13:t0D02,2:t0D02,14:t0E01,1:t0E01,0:t000F,15:t000F} def PolygoniseTri(g, iso, v0, v1, v2, v3): triangles = [] # Determine which of the 16 cases we have given which vertices # are above or below the isosurface triindex = 0; if g.val[v0] < iso: triindex |= 1 if g.val[v1] < iso: triindex |= 2 if g.val[v2] < iso: triindex |= 4 if g.val[v3] < iso: triindex |= 8 return trianglefs[triindex](g, iso, v0, v1, v2, v3) def VertexInterp(isolevel,p1,p2,valp1,valp2): if abs(isolevel-valp1) < 0.00001 : return(p1); if abs(isolevel-valp2) < 0.00001 : return(p2); if abs(valp1-valp2) < 0.00001 : return(p1); mu = (isolevel - valp1) / (valp2 - valp1) return Vector(p1.x + mu * (p2.x - p1.x), p1.y + mu * (p2.y - p1.y), p1.z + mu * (p2.z - p1.z)) if __name__ == "__main__": main() # GRASSHOPPER PYTHON OUTPUTPOINTS = rhinoscriptsyntax.AddPoints(POINTS_CONTAINER)POINTS = rhinoscriptsyntax.CullDuplicatePoints(POINTS)…
occur more than once in the same list, and different elements with identical values can occur more than once. Also, a list may contain lack of elements, referred to as "nulls".
Sets. Strictly speaking a Set is a mathematical construct which adheres to a strict collection of rules and limitations. Basically, a Set is the same as a List, with the exception that it cannot contain the same element more than once, or indeed two or more different elements with the same values. You see, in mathematics there is no difference between a value and an instance of that value, they are the same thing. In programming however it is possible to store the number 7 in more than one spot in the RAM. Grasshopper does not enforce this rule very strongly though, you can use a lot of Set components on lists that have multiple occurrences of the same value. The big difference between Lists and Sets in Grasshopper is that Sets are only defined for simple data types that have trivial equality comparisons. Basically: booleans, integers, numbers, complex numbers, strings, points, vectors, colours and intervals. Lists can contain all kinds of data.
Strings. Strings are text. There's nothing more to it. I don't know why early programmers chose to call them strings, but I suppose it's a better description of the memory representation of them. Strings are essentially sequences of individual characters.
Trees. Trees are the way all data is stored in Grasshopper. Even when you only have a single item, it will still be stored in a tree. A tree is a sorted collection of lists, where each list is identified by a path. A specific path can only occur once in a tree, when you merge two trees together, lists with identical paths are appended to each other. Trees are an attempt to losslessly represent not just the data itself, but also the history of that data. Imagine you have 4 curves {A,B,C,D} and you divide each into 3 points {X,Y,Z}. Then, for each of those points you create a new line segment {X',Y',Z'} and then divide each of those line segments again into 5 points each {K,L,M,N,O}. The way data is stored in trees, it should be possible to figure out whether a point M belongs to X' or to Z', and whether that X' or Z' came from A, B, C or D. This is why paths are often quite long after a while, because they encode a lot of history.
Paths. A Path is nothing more than a list of integers. It's denoted using curly brackets and semi-colons: {A;B;...;Z}. A Path should never be empty {} or have negative integers {0;-1}, but it is certainly possible to create a path like this and it probably won't even crash Grasshopper. Paths are 'grown' by components that (potentially) create more than one output value for a single input value. For example Divide Curve. It creates N points for every single input curve. In cases like this a new integer is appended to the end of the path.
In the next release the Path logic in Grasshopper is somewhat different. I fixed a number of obscure bugs (hopefully without introducing new fresh bugs) and special cased certain operations to somewhat reduce the speed at which paths grow. This may well break files that rely on a specific tree layout, but I hope the temporary sacrifice will be worth the long-term benefits.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
http://www.pilkington.com/) dominates the planar market. Charges "around" 1K Euros per m2 for a "plain" system. Personally in bespoke projects I design my own stuff but due to economies of scale ... they cost a bit more (but they look far more sexier, he he) . On the other hand only in a bespoke project I could dare to suggest such a solution (for a large scale building we are talking lots and lots of dollars).
3. Several scales below (aesthetics) you can find static alu systems (either structural or semi-structural):
Or hinged systems (either structural or semi-structural) capable to adapt in contemporary double curvature facades/roofs/envelopes/cats/dogs etc etc ... pioneered worldwide many years ago by my best friend Stefanos Tampakakis (everybody in UAE knows that genius man: http://www.alustet.gr/company.html):
4. With the exception of some paranoid things that Guru Stefanos does for Zaha these days we are talking about planar "facets" (obviously a triangle is such a planar facet). The current trend is: the more edges the better (humans excel in vanity matters). But achieving planarity in, say, quads (like yours) it adds another "restriction" on what you are doing. Until recently Evolute Tools Pro was the only answer. But right now ... well let's say that in short time you'll be greatly surprised by some WOW things in this Noble Forum, he he.
5. MERO (and obviously custom systems) can adapt (at almost no extra charge) in anything imaginable. But in a bespoke building ... well.. you know ultra rich people: they don't want MERO anymore since "everybody" does MERO solutions. Vanity, what else?
6. Smart Glass would become a must in the years to come: Eco-Architecture MUST dominate everything you do. On the other hand spending millions to do some extra WOW stuff (Vanity) ... it doesn't look to me very Eco-Friendly/Whatever ... but let's pretend so, he he.
7. I'm Architect but a bit different from the norm: for instance I smoke cigars (highly politically incorrect stuff) I always talk openly (ditto) and I ride lethal bikes (ditto).
may the Force (as always the Dark Option) be with you: go out there and kill them all.
best, Peter
…
Ladybug + Honeybee:
(Follow steps 0-4 for basic functionality and 0-9 for full functionality)
0. If you have an old version of LB+HB, download the file here (https://app.box.com/s/ds96em9l6stxpcw8kgtf)
and open it in Grasshopper to remove your old Ladybug and Honeybee version.
1. Make sure that you have a working copy of both Rhino and Grasshopper installed.
2. Open Rhino and type "Grasshopper" into the command line (without quotations). Wait for grasshopper to load.
3. Install GHPython 0.6.0.3 by downloading the file at this link (http://www.food4rhino.com/project/ghpython?ufh) and
drag the .gha file onto the Grasshopper canvas.
4. Select and drag all of the userObject files (downloaded with this instructions file) onto your Grasshopper canvas.
You should see Ladybug and Honeybee appear as tabs on the grasshopper tool bar.
(If you are reading this instruction on github you can download them from http://www.food4rhino.com/project/ladybug-honeybee)
5. Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. For Honeybee, continue to the following:
6. Install Radiance to C:\Radiance by downloading it from this link (https://github.com/NREL/Radiance/releases/download/4.2.2/radiance-4.2.2-win32.exe) and running the exe.
7. Install Daysim 4.0 for Windows to C:\DAYSIM by downloading it at this link (http://daysim.ning.com/page/download) and running the exe.
8. Install EnergyPlus 8.1 to C:\EnergyPlusV8-1-0 by going to the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/energyplus_download.cfm), making an account, going to "download older
versions of EnergyPlus, selecting 8.1 and running the exe.
9. Copy falsecolor2.exe (http://pyrat.googlecode.com/files/falsecolor2.exe) and evalglare.exe (http://www.ise.fraunhofer.de/en/downloads-englisch/software/evalglare_windows.zip/at_download/file) to C:\Radiance\bin
10. You now have a fully-working version of Ladybug + Honeybee. Get started visualizing weather data with these video tutorials (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O).
After I've done all the above I followed this video
https://vimeo.com/96155674
And everything works well.
…