merely automates finding clear intersections between pairs of objects and then splits the objects along those intersection *curves*, deletes the trims, then joins the remains, and cycles on. But within the confusing Rhino Settings tolerance value, wherever surfaces actually just sort of come closely together, there *is* *no* clear intersection curve. So it bugs out and stops working EVERY time you try more than a dozen or two spheres.
Some software can do this by switching to volumetric pixels (voxels). $9K-$30K Geomagic Freeform is an example of this. It also fails sometimes, often due to memory issues, as you can imagine since it needs to fill all inner space of each sphere definition with 3D pixels.
Materialize Magics for $16K can often handle such Booleans well. It will take a seeming lifetime to figure out such often pirate software kludges though.
One thing you can try though is to simply drape a mesh or NURBS plane onto the top of your spheres.
There's a well known *reason* your Booleans are failing. Nobody here has yet even hinted at it:
The main reason is that Rhino/Grasshopper developers don't care about the human element. The math exists to make this work very fast, every time. It just has to join things *right*, incorporating human knowledge of kissing surfaces, instead of acting stupidly, like some pocket calculator. But that would involve hacks that make 99% of complex Booleans work instead of 10%, and we can't have that since it will be SLOWER for the other 1% that just happen to have no nearly kissing or really kissing surfaces.
You could also use the new Cocoon plugin to do a surface *around* your structures, with a given radius of extension beyond the spheres, then offset that surface back the same radius. That is 100% robust, but won't offer quite as sharp of intersections, more rounded, like most everybody wants anyway.
You can *test* Boolean failures, by running a Grasshopper intersection command, to see the intersection curves, and zoom in to see how badly many of them are, all knotted, or twisted, or even with gaps, often with gaps.
It's a math problem nobody at McNeel wants to solve, sorry.
Just write a check for $25K and spend six months taking notes, like I did, and you can merge your simple spheres finally.…
Added by Nik Willmore at 6:33pm on October 20, 2015
nd helpfull for me, and I always wanted to know and explore it.. I used Galapagos for solving some task, and now I'm writng an article about what I'm doing.. I have several questions regarding the algorithm's steps you mentioned (I hope you can answer):
In your explanation you described several options for some parts of the algorithm (how to make coupling, mutating etc..). Can you please explain more in detailed (parameter, or atleast the methods only) you used for Galapagos?
To be persicely:
what is the population size on the beginning?
5.a) Did you use isotopically, exclusively or biased?? - If exclusively, what percentage? - If biased what is the 'vector of weights'? or however you implemented that..
5.b) For the implementation- do you have some Gaussian with a pick on the 'Inbreeding factor' (which is some number in [0,1], while 0 presents 'incestuous', and 1 presents 'zoophilic' or the opposite)?
5.c) Did you interpolated the values by averaging (i.e. equal weights) or using preference weight according to the fitness?
5.d) I see What you said about number of sliders, want to be sure I understand: the mutation here is just to pick some percentage of the genes (what percentage you used?) and change the child's value to be a random number in the range of the slider?
Can I change the percentage of individuals from G[n] are allowed (you said the default is 10%)?
What is the default for this? Is it the first one reached?
Can I specify the max number of iteration? Can I specify the number of generations? Can I specify a fitness value to stop in?
Maybe I missed some parameters, but I saw Galapagos as a "black box". But maybe I missed I can adjust it (in the later case, would like to know what are the defaults values).
I guess it is not an open-source code (right?) and maybe you don't want to share it for public. I would be glad if possible to know a bit more at least about the methods, so I describe it when writing my article, please J You can also answer me here: naama.glauber@gmail.com…
Added by Naama Glauber at 10:08am on November 14, 2018
w how. Thanks for that. Now I do have some questions.
1. I am using the area weight tool. I am first calculating the volume of the form. I then multiply that value by it's density. So for concrete I am using 2400 kg/m^3 x volume. I then divided that number by the area of the membrane that is supporting the mass. This gives me my area weight. It seems to be working well but I want to verify that this is the correct workflow. I also want to verify that gravity would be turned off since I am thinking it is already calculated within the weight component.
2. I am finding that the new triangular element tool works much better than trying to use EA/L as input for the springs from mesh. Even when I set the timestep, subiteration, and drag I still have issues with getting very stiff materials to work. On the new finite elements tool I wanted to verify that E was in pascals. I also wanted to ask if I use imperial units can psi be entered. Now from what I am seeing the materials are deforming more than expected and to get less deformation and stretch in the mesh area I am finding the E value needs to be increased more than the true material values. Often I am raising E by a multiple of 10 or 100.
I am going to describe my problem and I will gladly share the definition if you'd prefer looking it over but basically I have an inflated membrane at a certain pressure made of a particular material. I then have a certain volume of concrete on top of the inflated membrane. My goal is to review the displacements as the concrete is applied over the membrane and find the proper pressures to apply to keep it free from deformation. I am including a picture from a project that we used kangaroo on and attempted to deal with such issues. It was a class sponsored by Cloud9 architecture held at Art Center College of Design where I was one of the instructors. Hopefully this illustrates the problem. To summarize any example file that shows the best way to implement real material properties and unit based forces would be a helpful reference and would be greatly appreciated.
…
rring to the above image)
Area
effective
effective
Second
Elastic
Elastic
Plastic
Radius
Second
Elastic
Plastic
Radius
of
Vy shear
Vz shear
Moment
Modulus
Modulus
Modulus
of
Moment
Modulus
Modulus
of
Section
Area
Area
of Area
upper
lower
Gyration
of Area
Gyration
(strong axis)
(strong axis)
(strong axis)
(strong axis)
(strong axis)
(weak axis)
(weak axis)
(weak axis)
(weak axis)
A
Ay
Az
Iy
Wy
Wy
Wply
i_y
Iz
Wz
Wplz
i_z
cm2
cm2
cm2
cm4
cm3
cm3
cm3
cm
cm4
cm3
cm3
cm
I have a very similar table which I could import to the Karamba table. But I have i_v or i_u values as well as radius of inertia for instance.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
dimensjon
Masse
Areal
akse
Ix
Wpx
ix
akse
Iy
Wpy
iy
akse
Iv
Wpv
iv
Width
Thickness
Radius R
[kg/m]
[mm2]
[mm4]
[mm3]
[mm]
[mm4]
[mm3]
[mm]
[mm4]
[mm3]
[mm]
[mm]
[mm]
[mm]
L 20x3
0.89
113
x-x
4,000
290
5.9
y-y
4,000
290
5.9
v-v
1,700
200
3.9
20
3
4
L 20x4
1.15
146
x-x
5,000
360
5.8
y-y
5,000
360
5.8
v-v
2,200
240
3.8
20
4
4
L 25x3
1.12
143
x-x
8,200
460
7.6
y-y
8,200
460
7.6
v-v
3,400
330
4.9
25
3
4
L 25x4
1.46
186
x-x
10,300
590
7.4
y-y
10,300
590
7.4
v-v
4,300
400
4.8
25
4
4
L 30x3
1.37
175
x-x
14,600
680
9.1
y-y
14,600
680
9.1
v-v
6,100
510
5.9
30
3
5
L 30x4
1.79
228
x-x
18,400
870
9.0
y-y
18,400
870
9.0
v-v
7,700
620
5.8
30
4
5
L 36x3
1.66
211
x-x
25,800
990
11.1
y-y
25,800
990
11.1
v-v
10,700
760
7.1
36
3
5
L 36x4
2.16
276
x-x
32,900
1,280
10.9
y-y
32,900
1,280
10.9
v-v
13,700
930
7.0
36
4
5
L 36x5
2.65
338
x-x
39,500
1,560
10.8
y-y
39,500
1,560
10.8
v-v
16,500
1,090
7.0
36
5
5
I have diagonals (bracings) which can buckle in these "non-regular" directions too, and they do. If I could add those values then in the Karamba model I could assign specific buckling scenarios..... I can see another challenge which will be at the ModifyElement component, I will not be able to choose these buckling lengths, in these directions.
Do you think this functionality can be added within short, or should I try to find another way to model these members?
Br, Balazs
…
ly fabricated interventions and interactive electronic performance art installations in Barra Funda. Along with other experts, these tutors will teach how to use and apply new design technologies, notably Rhino and Grasshopper (and numerous plug-ins including GECO, Galapagos, Kangaroo and RhinoCam); Arduino and Processing; and the use of laser-cutters, rapid- prototype machines and CNC routers and mills.
Alan Dempsey of NEX, was in 2010, selected by the Centre for European Architecture/Chicago Athenaeum as one of the 40 most significant architects in the EU under 40. In 2008 he was selected by the British Council as one of the six most significant Design Entrepreneurs. He previously worked with Future Systems, OCEAN and Homa Farjadi. Alan was an AA Unit Tutor and is Director of the AA Independent’s Group (www.independentsgroup.net), which facilitates research into the use of computational design and fabrication. Alan has lectured, exhibited and been published worldwide. His work has received a number of awards, including a LEAF award for Spencer Dock Bridge, and a D&AD pencil for the [C]space DRL 10 Pavilion.
Robert Stuart Smith of Kokkugiais a Studio Course Master at the AA DRL. Robert previously worked for Lab Architecture Studio and Nicholas Grimshaw & Partners. He focuses on self-organisational systems and developmental growth, pursuing polyvalent and environmentally responsive affect. He leads consultation to Cecil Balmond on non-linear algorithmic design research. Kokkugia has projects in the USA, UK and Mexico, and is exhibited and published internationally.
Iván Ivanoff is an artist, programmer, and researcher. He searches for new forms of communication for the society of the future and is the director of different Media Labs worldwide. He founded the artistic collaborative i2off.org+r3nder.net, which develops multi-media and interactive projects, and Estado Lateral Media Lab to investigate and develop new technologies.
The Barra Funda district of São Paulo was once characterised by a mix of small industrial, commercial and residential programmes, but, as economic policies have favoured larger production industries, numerous companies have abandoned the area. In response, the workshop proposes the creation of new types of smaller industries to produce a mix of both consumption and production, manifested through micro-manufacturing interventions that can co-exist alongside retail and housing. Computational design and digital fabrication could be used to help create these new micro-industries, which in turn will help empower local craftsman to produce and sell directly to consumers through micro-manufacturing, located in small urban workshops.
The workshop will tap into emergent gallery scene of Barra Funda and local initiatives that use computational technology to introduce a new cultural and economic impetus. The workshop is a part of the International Festival of Electronic Language (FILE), an exhibition of interactive electronic technology, and will import these electronic technologies out of the galler, collaborating with local manufacturers, artists, and activists, with a goal of disseminating a high-tech yet low-cost and small-scale fabrication systems to promote this new micro-industrial movement. The workshop is open to architecture and design students and professionals worldwide.…
la corretta comprensione del software che di livello specialistico per un confronto diretto con alcuni aspetti fondamentali dell’ architettura e del design.
Attraverso l'utilizzo di Grasshopper rivoluzionaria plug-in di Rhinoceros, si insegneranno nuove tecniche di modellazione parametrica.
Grasshopper, permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs abbandonando in parte l'interfaccia classica di Rhinoceros. Quest'ultimo infatti viene sostituito da un menù a tendine dove vengono collezionati nodi utili alla composizione di algoritmi risolutivi.
La plug-in Grasshopper, dimostra come il linguaggio del computer stia diventando un reale strumento progettuale.
Il corso si svolgerà nei seguenti giorni: Sabato 26 Ottobre dalle ore 10.00 alle ore 19.00 Domenica 27 Ottobre dalle ore 10.00 alle ore 19.00 Scadenza preiscrizione per Grasshopper: 23/10
Contenuti
Nella prima parte del corso attraverso degli esercizi base si insegneranno i metodi di esplicitazione degli algoritmi generativi. In queste ore di lezione si illustreranno, attraverso fasi operative, i seguenti argomenti:
Suddivisione degli algoritmi in parametri e componenti;
Tipologie di dati comptiili con Grasshopper e loro combinazione creando definizioni minime;
Funzioni matematiche e logiche;
Data flow, liste e filtri di esclusione;
Costruzione di curve e superfici e loro trasformazione;
Nella seconda parte del corso lo strumento viene specializzato affrontando editing e trasformazioni complesse sulle superfici:
Elaborazione delle superfici di suddivisione;
Tassellazione spaziale di superfici a doppia curvatura;
Gestione di parametri variabili per la progettazione di definizioni finalizzate al controllo del movimento;
Ideazione di algoritmi per il passaggio dal modello digitale al modello reale attraverso la tecnica dello sliceing;
Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Tutor del corso
Il corso sarà tenuto da un docente qualificato, esperto in disegno e rappresentazione dell' architettura e del design:
Michele Calvano| _architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART (Autorized Rhino Trainer)
Info
Responsabile didattico e docente del corso: arch. Michele Calvano cell: 340 3476330
Info mail: parametricart@gmail.com
…
ALISTICO. Ciascun modulo si svolgerà nell’arco di due giornate e si potrà scegliere se partecipare ad entrambi i moduli o altrimenti solo all’uno o all’altro.
In questo corso si insegneranno nuove tecniche di modellazione parametrica attraverso l'utilizzo di Grasshopper, rivoluzionaria plug-in di Rhinoceros. Grasshopper permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs, abbandonando in parte l'interfaccia classica di Rhinoceros. Quest'ultimo infatti viene sostituito da un menù a tendine nel quale vengono collezionati nodi utili alla composizione di algoritmi risolutivi.
La plug-in Grasshopper, dimostra come il linguaggio del computer stia diventando un reale strumento progettuale.GRASSHOPPER-BASE - 8 oreil giorno 09/05/2013 dalle 10.00 alle 19.00
Nella prima parte del corso si insegneranno i metodi di esplicitazione degli algoritmi, applicati ad esercizi base utili alla comprensione del software. In queste ore si illustreranno, attraverso fasi operative, i seguenti argomenti:
Suddivisione degli algoritmi in parametri e componenti;
Tipologie di dati compatibili con Grasshopper e loro combinazione creando definizioni minime;
Funzioni matematiche e logiche
Data flow, liste e filtri di esclusione.
Costruzione di curve e superfici e loro trasformazione.
Scadenza preiscrizione per Grasshopper - BASE : 06/05GRASSHOPPER-SPECIALISTICO - 8 oreil giorno 10/05/2013 dalle 10.00 alle 19.00
Nella seconda parte del corso lo strumento viene specializzato affrontando editing e trasformazioni complesse sulle superfici:
Elaborazione delle superficie di suddivisione;
Tassellazione spaziale di superfici a doppia curvatura;
Gestione di parametri variabili per la progettazione di definizioni finalizzate al controllo del movimento;
Ideazione di algoritmi per il passaggio dal modello digitale al modello reale attraverso la tecnica dello sliceing.
Scadenza preiscrizione per Grasshopper - SPECIALISTICO : 07/05
Destinatari
Il corso è rivolto a tutti gli studenti universitari e professionisti che hanno una buona conoscenza delle tecniche di modellazione NURBS.
Prerequisiti
I partecipanti dovranno venire al corso muniti di proprio laptop e con software Rhinoceros perfettamente funzionanti.Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Docente del corso
Il corso sarà tenuto da un docente qualificato, esperto in disegno e rappresentazione dell' architettura e del design:
Michele Calvano| _architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART (Autorized Rhino Trainer) - [vedi CV]
…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…