looked at autodesk simulation cfd 2015 and was optimistic because it had an export plugin from revit, which i use anyway for material takeoffs and etc, but found that it did not take solar radiation into account. This was a downer because I have heard that solar radiation could effect indoor airflow - convection - as much as 50 percent at a time.
Then I searched again and found that Hyperworks, a software by altair technology can be coupled with a radiation software. So I went through the trouble of obtaining an educational license of Hyperworks. However, though some email exchange I have found that the coupling is a one-way. The radiation analysis software was used, I think, for understanding the solar loading for a SOM project called church of light.
The support guy said : "Unfortunately our coupling with Hyperworks is really a one way coupling. We can accept H coefficients from their software in RadTherm, but they will not read in our wall temps. That said, it still can be a useful coupling in the sense that you can run the analysis in Hyperworks, send H coefficients to RadTherm, and run the analysis to better understand radiation and conduction. Most importantly, that analysis can be done for longer transient analysis, but will require much less compute time and resources."
Not only did I not understand what he means by the H coefficients, my wanting to get a CFD understanding coupled with solar radiation was again, unsatisfied. In the mean while I had to finish a presentation so I haven't had the time to try to get some result on the natural ventilation. I would probably need to look into how their solutions work before I can understand if their software would "do the job"
Thank you for letting me know about your work on this. I downloaded the Honeybee_Set EP Natural Ventilation component and made sure that it is allowed, but it does not show up in grasshopper.
You pointed out that "The component (and the corresponding equation) is mostly meant for cases where you have zones with windows that are NOT connected by an air wall (or a larger airflow network)." I wondered if you are suggesting it would be a code violation for zones to be connected by an air wall for fire safety reasons. It would be a violation I guess, like not putting an fiber insulation or some kind of smoke stop between Spandrel panels and the edge of a floor plate would be a code violation for a typical office building.
There is a project by kevin daly architects where you can see a section drawing with what seems like a cfd analysis (could be an illustration)
it was my initial visualization/simulation goals were for a facade design I am working on
1) an average air velocity across a zone at noon, for example, if a passive design strategy like this was used. for this I am guessing cfd is not entirely necessary. probably means that it could be used earlier in a design process, too. This would be more about user comfort.
2) at a later phase, like in detailing facade components, if airflow is indeed as expected for a zone that is connected to an air wall / chimney like feature (and to see if there is a proper mixing of air)
3) and a projection of energy savings, of course.
After seeing a video of simulation cfd I was optimistic, but like I said sim cfd does not take account of solar loading. I think I would probably go ahead start with one zone with sim cfd first, try three zones stacked on top of each other, then try hyperworks and try to factor in solar radiation.
For analyzing multiple zones on different levels, being able to add a chimney would be especially useful, I think. Having said that, I don't have a lot of experience of using honeybee except for the daylight component so it would take some time for me to understand the components.
I hope some of the information here is useful for you. after all, both sim cfd and hyperworks are commercial softwares and somewhat different than the e plus project you are working on, I guess but still trying to address a similar problem.
so.. in cased you missed it I was asking I downloaded the Honeybee_Set EP Natural Ventilation component and made sure that it is allowed and placed in the user object foler, but it does not show up in grasshopper. what could be the reason?
…
o express my gratitude. I've been experimenting with your definitions (and still am), but let me extend my question.
Actually what I'm trying to achieve, is to recreate another project by Andrew Kudless, the spore lamp (I mentioned the Chrysalis at the beginning just because of the animation, which wasn't included in the Spore Lamp presentation).
Basically the spore lamp seems to me to be something like a preliminary study to the Chrysalis III project (I think it's a similar approach).
Andrew stated on his site that he used kangaroo for this project, so the Spore Lamp consists in my opinion either of a relaxed voronoi 3d diagram (b-rep, b-rep intersection) on a sphere which then has been planarized, or more likely it is a sort of relaxed facet dome.
The trick is to:
1. obtain a nicely-balanced voronoish diagram (or facet dome cells)
2. keep each cell/polyline planar (or force them with kangaroo to be planar) in order to move scale and loft them later on.
Here is what I have by now. (files: matsys spore lamp attempt)
That's the closest appearance that I got so far (simple move scale and loft of facet dome cells with the amount of transformations being proportional to the power of the initial cell area: bigger cell = bigger opening etc.) - with no relaxation of the diagram. But it's obviously not the same thing as the matsys design.
Here are some of my attempts of facet dome relaxation, but well, it certainly still not the right approach, and most importantly I don't know how to keep or force the cells to be planar after the relaxation.
1. pulling vertices to a sphere - no anchor points. That obviously doesn't make sense at all, but the relaxation without anchor points gives at the beginning a pattern that is closer to what I am looking for. (files: relaxation 01)
2. pulling vertices to a sphere - two faces of the initial facet dome anchored (files: relaxation 02)
3. pulling vertices to the initial geometry (facet dome) no anchor points (files: relaxation 03)
The cell pattern of the lamp kinda looks like this:
you can find it here: http://www.grasshopper3d.com/forum/topics/kangaroo-0-095-released?g...
Done with Plankton (of course without the "gradient increase" appearance), but in fact not, I took a look at Daniel Parker's Plankton example files, and it's not quite the same thing. Also the cells aren't planar...
The last problem is that during the relaxation attempts that I did, the biggest initial cells became enormous, and it's not like that in the elegant project by Andrew Kudless, that I'd like to achieve.
So to sum up:
Goal no 1: Obtain an elegant voronoi /facet dome cell pattern on a sphere (or an ellipsoid surface, whatever).
Goal no 2: Keep the cells planar in order to be able to loft them later and obtain those pyramidal forms, and assemble easily
Any ideas? Or maybe there's a completely different approach to that?…
les automatically at the right angle to form the cap of an icosahedron.
To complete the full icosahedron, we consider just the six points we already know, the five pentagon vertices and the raised pyramid tip and reorient one of the vertices using three-point transformation so it obtains the exact same relationship between vertices only one more stage beyond our little cap pyramid, and we do a five-fold polar array:
I used a password-protected cluster I ran into one the forum somewhere to reproduce Rhino's 3-point orient command:
A final 3-point orientation transforms in space the original pyramid tip down to the bottom:
Now we can create a convex hull which gives an icosahedron mesh:
So that's how you build an icosahedron in Rhino from scratch, only using rather long winded Grasshopper.
Now we use the Weaverbird plug-in to subdivide the faces and then project the vertices out onto a sphere via finding the closest points to a sphere and then recreating a convex hull to make a geodesic dome mesh:
Subdividing two times works fine but 3 times blows up convex hull, so I'll just have due with the the subdivision step and leave out projecting back to a sphere, since the algorithm already gives a nice spherical result that you can see inside this disaster:
Now you know what a standard geodescic dome is, just an icosahedron with faces divided into smaller triangles, projected out to a sphere.
Actually, the mere subdivision is just a bit blobby instead of a sphere, damn it, so I'll have to topologically recreate the mesh after projecting the points indeed back onto our sphere.
Using a subdivision plug-in may be slightly throwing the perfect result off, so manually creating subdivision points on each mesh face may be in order, doing them flat against each icosahedron face:
You can also start with the two other triangulated Platonic solids but those give less regular triangles:
…
a problem with SSL. Any Ideas? I am using the following code:
import json,httplib connection = httplib.HTTPSConnection('api.parse.com', 443) connection.connect() connection.request('GET', '/1/classes/MY-CLASS', '', { "X-Parse-Application-Id": "MY-APP-ID", "X-Parse-REST-API-Key": "MY-REST-API-KEY" }) result = json.loads(connection.getresponse().read()) print result
I Get the Following Messages:
Runtime error (IOException): Authentication failed because the remote party has closed the transport stream. Traceback: line 280, in do_handshake, "C:\Program Files\Rhinoceros 5.0 (64-bit)\Plug-ins\IronPython\Lib\ssl.py" line 120, in __init__, "C:\Program Files\Rhinoceros 5.0 (64-bit)\Plug-ins\IronPython\Lib\ssl.py" line 336, in wrap_socket, "C:\Program Files\Rhinoceros 5.0 (64-bit)\Plug-ins\IronPython\Lib\ssl.py" line 1156, in connect, "C:\Program Files\Rhinoceros 5.0 (64-bit)\Plug-ins\IronPython\Lib\httplib.py" line 3, in script Any help would be greatly appreciated! Thanks in advance! -Zach…
erning how to do that on a sphere.
So I know already all the different approches of how to get a relaxed voronoi pattern on a free-form open surface, but still don't know how to obtain the same elegant effect on a sphere (or an ellipsoid closed surface, whatever), or how to relax the facet dome cells.
Andrew stated on his site that he used kangaroo for this project, so the Spore Lamp consists in my opinion either of a relaxed voronoi 3d diagram (b-rep, b-rep intersection) on a sphere the cells of which have been planarized later on, or more likely it is a sort of relaxed facet dome.
The trick is to:
1. obtain a nicely-balanced voronoish diagram (or facet dome cells) on a sphere
2. keep each cell/polyline planar (or force them with kangaroo to be planar) in order to move scale and loft them later on.
Here is what I have by now.(files: matsys spore lamp attempt)
That's the closest appearance that I got so far (simple move scale and loft of facet dome cells with the amount of transformations being proportional to the power of the initial cell area: bigger cell = bigger opening etc.) - with no relaxation of the diagram. But it's obviously not the same thing as the matsys design.
Here are some of my attempts of facet dome relaxation, but well, it's certainly still not the right approach, and most importantly I don't know how to keep or force the cells to be planar after the relaxation.
1. pulling vertices to a sphere - no anchor points. That obviously doesn't make sense at all, but the relaxation without anchor points gives at the beginning a pattern that is closer to what I am looking for. (files: relaxation 01)
2. pulling vertices to a sphere - two faces of the initial facet dome anchored (files: relaxation 02)
3. pulling vertices to the initial geometry (facet dome) no anchor points (files: relaxation 03)
The cell pattern of the lamp kinda looks like this:
You can find it here: http://www.grasshopper3d.com/forum/topics/kangaroo-0-095-releasedgroupUrl=kangaroo&x=1&groupId=2985220%3AGroup%3A120977&id=2985220%3ATopic%3A972434&page=2#comments
Done with Plankton (of course without the "gradient increase" appearance), but in fact not, I took a look at Daniel Parker's Plankton example files, and it's not quite the same thing. Also the cells aren't planar...
The last problem is that during the relaxation attempts that I did, the biggest initial cells became enormous, and it's not like that in the elegant project by Andrew Kudless, that I'd like to achieve.
So to sum up:
Goal no 1: Obtain an elegant voronoi /facet dome cell pattern on a sphere (or an ellipsoid surface, whatever).
Goal no 2: How to keep the cells planar in order to be able to loft them later, obtain those pyramidal forms, and assemble easily
Have you got any ideas? Or maybe there's a completely different approach to that?
Cheers, and thanks in advance…
ch has a vertex in each of the vertices of the polyline. But, when I try to create the mesh using the Mesh Brep component, I get a simplified mesh, where the extra vertices in the edges of the polyline have disappeared. I think it is easier to understand what I am trying to say with the following screenshots:
Polyline:
Mesh created with the rhino command:
Mesh created using grasshopper:
The last mesh has less faces, as the Mesh Brep component gets rid of the extra vertices that define the polyline.
Any suggestions?
Thanks,
Diego…
imeBinder.CSharpArgumentInfo.Create'
Is it possible to solve this issue?
using System;
using IronPython.Hosting;
using IronPython.Runtime;
using Microsoft.Scripting;
using Microsoft.Scripting.Hosting;
using Microsoft.CSharp;
namespace Bob.Meshes {
public class pythonFromCShapr {
ScriptEngine engine = Python.CreateEngine();
public pythonFromCShapr() {
}
public void something() {
dynamic scope = engine.CreateScope();
scope.Add = new Func<int, int, int>((x, y) => x + y);
Console.WriteLine( scope.Add(2, 3));
}
}
}…
Analysis Tools (LAT). Our plugin has come a long way in the last 4 years and, while the legacy version will still include some small updates and contributions, we are confident in saying that the changes will be far fewer and the plugin more stable in the following months as we switch gears into the LAT effort. I can say personally that (save for a couple of small capabilities) I have made it through my list of critical features and I will hereafter be working on making these features cross-platform, cleanly-implemented, and well-documented in the new Ladybug Analysis Tools software package. As always, you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
The majority of changes with this release represent “icing on the cake” after a long, multi-year effort to connect to the major open source engines and datasets. So, without further adieu, here is the list of the new capabilities added with this release:
LADYBUG
Stereographic Sky Projections - Thanks to several code contributions from Byron Mardas, all Ladybug sky visualizations now support stereographic projections! Such projections are useful for understanding the hemispherical visualizations in a 2D format and they also make it easier to overlay different sky datasets on top of one another. Check here for an example file showing the sun path overlaid with helpful/harmful parts of the sky and see here for an example file using shading masks representing strategies (like an overhang) on top of the helpful / harmful portions of the sun path.
Wind Rose Upgrades - Devang Chauhan has added several new features to the Ladybug wind rose including both visual and numerical outputs of average wind velocity and frequency for each petal of the rose. Not only does this enhance the usefulness of the rose but it also paves the way for the use of the wind rose to set up CFD simulations once Butterfly is released in the near future. The new features of the wind rose can be seen in this hydra example file.
Complete Set of Local Thermal Discomfort Models - After the last release included components to evaluate radiant asymmetry discomfort (which can be modeled using these example files: 1, 2), today’s release completes Ladybug’s suite of local discomfort models from ASHRAE and the ISO by adding components to account for discomfort from cold draft. Specifically, two draft models have been added for different types of situations. The first is an older model published by P.O. Fanger, which was developed through experiments where subjects had cold air blown on the back of their neck (the most sensitive part of the body to draft). While this is useful for understanding a worst-case scenario, it can greatly overestimate the discomfort for cases of draft at ankle level - a more common occurrence that typically results from the tendency of cold air to sink. For this situation, a second draft discomfort model has been included, which is specifically meant to forecast ankle draft discomfort. The model is currently undergoing review for integration into ASHRAE-55 and a publication outlining the derivation of this model can be found here:
Liu, S., Schiavon, S., Kabanshi, A. and Nazaroff, W. (2016), Predicted Percentage Dissatisfied with Ankle Draft. Indoor Air. Accepted Author Manuscript. doi:10.1111/ina.12364 (http://escholarship.org/uc/item/9076254n).
Special thanks is due to Shichao Liu, Toby Cheung and Stefano Schiavon for sharing the model and the results of their study with the development team. The integration of draft models completes the full integration of ASHRAE-55 and EN-15251 with Ladybug. Now, you can rest assured that, if there is a certain thermal comfort standard that you need to fulfill for a given project, you can model it with the ‘bug!
Window-Based Draft Model - With the integration of draft models, the first question that one might ask is “how should these models be applied to typical design cases?” While the (soon-to-be-released) Butterfly plugin for OpenFOAM should open up a Pandora’s box of possible situations, this release of Ladybug includes a simplified downdraft model from cold vertical surfaces, which helps model several typical cases of draft discomfort. The model has been validated across several papers:
Heiselberg, P. (1994). Draught Risk From Cold Vertical Surfaces. Building and Environment, Vol 29, No. 3, 297-301
Manz, H. and Frank, T. (2003). Analysis of Thermal Comfort near Cold Vertical Surfaces by Means of Computational Fluid Dynamics. Indoor Built Environment. 13: 233-242
It has been built into the “Ladybug_Downdraft Velocity” component and has been included in an example file illustrating discomfort from cold windows in winter. The example is intended to show when glazing ratio and window U-Values are small enough to eliminate perimeter heating - a practice that is aesthetically unpleasing, costly to maintain and wasteful in its energy use.
Operative Temperature on the Psychrometric Chart - This is a feature that should have been added a long time ago but we are finally happy to say that the Ladybug_Psychrometric Chart can draw a comfort polygon assuming that the air temperature and radiant temperature are the same value (aka. an operative temperature psychrometric chart). This operative temperature chart is the format that is needed to use the ASHRAE-55 graphical method and is generally a better representation of the range of comfort in cases where one does not intend to hold the radiant temperature constant. This operative temperature capability is now set as the default on the component but you can, of course, still bring back the older comfort polygon by simply plugging in a value for meanRadiantTemperature_.
Contour Map Visualizations - Using the same inputs as the Ladybug_Recolor Mesh component, the new Ladybug_Contour Mesh component allows you to generate contoured color graphics from the results of any analysis. Now, you to maximize the use of your high-resolution studies with contours that highlight thresholds and gradients!
Image Texture Mapping for Colored Meshes - Antonello DiNunzio has added the very useful Ladybug_Texture Maker component, which allows you to bake Ladybug colored meshes with image texture maps (as opposed to the classic method that used colored vertices). This enables the creation of transparent Ladybug meshes, making it even easier to overlay Ladybug graphics with one another and with Rhino geometry:
This component also adds the ability to render Ladybug + Honeybee meshes with other rendering programs like V-Ray and 3ds Max. So you can produce Ladybug graphics like this!
Finally, image-mapped textures are also the format required for gaming and Virtual Reality software like Unity and Augmented Reality programs like Augment. So now you can export your Ladybug meshes all of the way to the virtual world!
Rhino Sun Component - If you have ever had to set up the sun for a rendering plugin and wished that you could just take your Ladybug sun and use that, then you are in luck! Byron Mardas has contributed a component that lets you set the Rhino sun based on your EPW location data, your north direction (if different from the Y-Axis) and any time of day that you want. Not only does this make it easier to coordinate the Rhino sun with your Ladybug visualizations, but you can also use it for real time shadow previews by setting your Rhino view to “Rendered” and scrolling through a slider.
Rendered Ladybug Animations - With both the image texture mapping and the Rhino sun components released, your first thought might be “it would be great if I could use this all in a rendered animation!” Thankfully, Ladybug has added a new component to help you here. The Ladybug_Render View component works in essentially the same way as the Capture View component, allowing you to make a series of images as you animate through a slider. The major benefit here is that it works with both Rhino Render and V-Ray so that animations like this can be produced effortlessly:
Cone of Vision Added - Antonello Di Nunzio has added a component that allows you to visualize various cones of vision in order to help inform your view studies. You can fine tune parameters to include just text-readable or full peripheral vision and use the resulting view cone to constrict the results of your “Ladybug_View Analysis” studies.
Terrain WIP Components Released as the Gismo Plugin - Our friend Djordje has released a new plugin Gismo - a plugin for GIS environmental analysis. As a result the following 5 terrain components: Horizon Angles, Flow Paths, Terrain Shading Mask, Terrain Generator 2, Terrain Analysis, have been removed from Ladybug+Honeybee's WIP section and are added to Gismo.
HONEYBEE
Search, Select, and Import the Hundreds Outputs from EnergyPlus/OpenStudio - Many of the power users in our community know that EnergyPlus is capable of writing several hundred different outputs from the simulation (well beyond what the basic Honeybee result readers can import). While Honeybee has always allowed one to request these outputs by adding them to the simulationOutputs_ of the component, there has not been an official workflow for searching through all of the possible outputs or importing their specific results… until now! We have added the "Honeybee_Read Result Dictionary" component, which allows you to parse the Result Data Dictionary (or .rrd file) that EnergyPlus outputs during every run of a given model. This allows you to see all of the outputs that are available for the model and you can even search through this list to find a particular output that you are interested in. Once you find what you are looking for, simply copy the text output from the component into a panel and and plug this into simulationOutputs_. Then you can use the "Honeybee_Read EP Custom Result" component to bring your custom results into GH after rerunning the simulation. The example file of an evaporative cooling tower shows how to use the workflow to request and import in the energy removed by the tower.
OpenStudio HVAC System Sizing Results - After the full integration of HVAC in the last release, we realized that a number of people wanted to run EnergyPlus models simply to evaluate the size of the Heating/Cooling system in the model (obtained from the EnergyPlus autosize calculation that is run at the start of every simulation). Such a sizing calculation can be a great way to quantify the anticipated savings from a given strategy (like shading) on the size/cost of the building’s HVAC system. To get the results of the sizing calculation, all that one needs to do is connect the output eioFile from the OpenStudio component to the Honeybee_Read HVAC Sizing component. The outputs will indicate the peak heating/cooling loads of each zone (in Watts) as well as the size of each piece of HVAC equipment in the model. The next time that you are on a project that is about to value-engineer out an exterior shading system, use the workflow in the following example file to show that the client will probably end up paying for it with a more expensive HVAC system: Quantifying HVAC Sizing Impact of Shade.
Improved Memory Usage When Building Large Energy Models - As we take the capabilities of Honeybee to larger and larger models, many of us have begun to run up against a particular limitation of our machines: memory. After upgrading our machines to have 32 GBs of RAM, there was only one way left to alleviate the problem: restructure some of the code. Honeybee now uses an enhanced approach that ensures all the previous iterations of Honeybee objects will be removed from the memory once there is a change. In any case, the considerations of memory are definitely something that we intend to improve with the future Honeybee[+] plugin.
Workflow to Import gbXML Files - While GrizzlyBear has been around for several years, enabling us to export Honeybee zones to gbXML, we have gone for quite some time without a workflow to import gbXML files to Honeybee. The new Honeybee_gbXML to Honeybee component addresses this and establishes an easier path to import models from Revit into honeybee. You can read more about the component in this post.
Window Frame Capabilities Added to OpenStudio - After the implementation of LBNL THERM / WINDOW capabilities in the last two releases, there was one final bridge to build in the Honeybee workflow - fully connecting LBNL WINDOW to Honeybee’s OpenStudio workflow. This release of Honeybee will now write all FrameAndDivider objects exported from LBNL WINDOW glazing systems into the energy simulation, enabling you to account for the frame’s thermal bridging effects. As long as the construction is brought in with the Honeybee_Import WINDOW IDF Report component, the frames associated with the construction will be assigned to all windows that have the construction. Finally, it is worth noting that the current Honeybee will also write all glass spectral data as well as gas (or gas mixture) materials into the simulation. This means that essentially all properties of any IDF export that one makes from LBNL WINDOW can be factored into the OpenStudio energy simulation (with the only exception being BSDF materials).
OpenStudio Daylight Sensors Added - In our previous releases of Honeybee, the only means of correctly account for daylight sensors in an energy simulation was to run an annual daylight simulation and use the resulting schedules for the lighting in the energy simulation. However, this can take a lot of time and work to set up and run, particularly if the daylight control (at the end of the day) will be driven by just one sensor per room. Now, we have added another option, which uses OpenStudio/EnergyPlus’s built-in daylight controls. You can assign just a point and an illuminance target on the “Set Zone Thresholds” component and the lighting will be automatically adjusted in the course of the simulation. It should also be noted that the addition of daylight sensors has also coincided with the addition of blind/shade control based on glare. The same sensor point for daylight can be used to drive dynamic shades in the energy simulation based on glare experienced at this point. This example file shows how to set up daylight controls on the EnergyPlus model and check the lighting power results to see the effect.
Better Defaults for Natural Ventilation - After many good people wrote to me informing me that Honeybee overestimates natural ventilation airflow and I wrote back showing the way that I intended natural ventilation to be set up with the component, it dawned on me that I had selected some poor component defaults. Accordingly, this release includes a window-based natural ventilation option on the Set EP Airflow component that corrects for some of the common issues that I have seen. Insect screens are included by default and the component runs a general check to see if wind-driven cross ventilation is possible before auto-assigning it. The component will air on the side of more-conservative, lower airflow rates unless the user overrides the defaults. Finally, it’s worth noting that all of these changes have not affected the freedom of the Custom WindAndStack option on the component. The new defaults can be viewed in this example file.
CFD Results Can be Plugged into Microclimate Maps - In preparation for the (very soon) release of the Butterfly that connects to the OpenFOAM CFD platform, we just wanted to note that all of the microclimate map recipes can now take an input of a csv file with a matrix of CFD results for wind speed. For the time being, we have used these to produce very high-accuracy, high resolution maps of outdoor comfort. There will be more to follow soon!
We should also note that, in the last release I mentioned that we would be phasing out the EnergyPlus component so that all efforts are focused on the OpenStudio component. While I reiterate that all of the features of the EnergyPlus component are available in the OpenStudio component and I encourage everyone to use the OpenStudio component in order to take advantage of its HVAC capabilities, I have come to realize that many prefer to use the EnergyPlus component out of habit and have not yet gotten the time to understand why the OpenStudio component is an improvement over the EnergyPlus component. As a result, we have decided to leave the EnergyPlus component in place for the time being so that everyone has more time to understand this. The future Ladybug Analysis Tools platform will only interact with EnergyPlus through OpenStudio and so it is recommended that everyone use these two components in the Honeybee plugin will serve as an educational resource to understand our current path moving forward with OpenStudio.
Lastly, it is with great pleasure that we welcome Devang Chauhan and Byron Mardas to the developer team! As mentioned previously Devang has contributed several updates to the Ladybug Wind Rose in addition to finding and solving a multitude of bugs in other components. Byron has contributed code that has enabled the previously-mentioned stereographic sky projections along with a better method for running the Ladybug Sky Mask. Finally, Byron has contributed the Rhino Sun component, which allows you to coordinate your Rhino renders with your Ladybug data. Welcome to the Ladybug team, gentlemen!
As always let us know your comments and suggestions. Cheers!
Ladybug Analysis Tools Development Team…
ly has finally metamorphosed to have all known major bugs fixed and is ready to be used by a larger number of people in our community.
Butterfly is powered by OpenFOAM, which is a validated and open-source engine for Computational Fluid Dynamics (CFD). Primarily, Butterfly assists with exporting geometry and other input parameters from the CAD + scripting interface to the OpenFOAM engine. The Grasshopper plugin supports live results visualization that updates as the CFD simulation iterates. The Dynamo plugin supports results visualization once the analysis is over or paused.
For installation instructions and guidance on getting started, check out the Butterfly wiki page. There, you can find step-by-step installation directions and tutorial videos. There also 3 YouTube playlists for getting you started with installing OpenFOAM for Windows and using Butterfly for Grasshopper and Butterfly for Dynamo.
Similar to other ladybug tools, Butterfly uses an external validated engine (in this case, OpenFOAM) and you need to install it first to get the insect up-and-running. However, unlike Radiance and EnergyPlus, OpenFOAM doesn’t have a native installation for Windows and it requires Linux to run. Accordingly, the current version of “OpenFOAM for Windows” uses a technology called docker to run a Linux virtual machine on your system, inside which OpenFOAM operates. While this sounds complicated, the good news is that all of this setup has been packaged into the installer for “OpenFOAM for Windows.” So running this installer with all its defaults should give you everything you need.
The bad news is that the installation can fail if you don’t check your Windows system properly beforehand or don’t follow every step carefully afterwards. You will also need to run Rhino, Revit, and OpenFOAM as an administrator to ensure Butterfly works properly (by right-clicking each launcher for the program and selecting “Run As Administrator"). This said, if you follow the steps carefully, you should have no issues with the installation. You can find some of the issues that people faced during the alpha testing and the solutions to them here.
Butterfly is the first plugin that is fully developed based on the structure that I discussed before which consists of a core library and [+] libraries for specific software (in this case Grasshopper and Dynamo). We hope this structure to extend ladybug tools to more platforms by re-using the current code. We will provide a better documentation with more details on this matter in the near future but for now you can use the API for butterfly, butterfly_grasshopper and butterfly_dynamo for customizing or extending the current development.
Finally, having access to a powerful CFD engine from inside parametric/generative modeling environments is a great power and as Spider-Man or Uncle Ben once said:
“with great power comes great responsibility!”
We believe in learning by doing and we don’t expect you to be a CFD expert to get started with butterfly however we expect you to educate yourself along the way. If you have never used OpenFOAM before here is a great presentation to get started. We also highly recommend checking out the official OpenFOAM User Guide that goes through most of its functionality. Finally, we have also collected a number of other learning resources on this page that can be a good starting point.
We understand that you will have questions about the plugins which you can post to this forum or Dynamo discussion forum however CFD related issues and questions should be posted to CFD Online.
I like to thank everyone who have helped us with the development and testing during the last year or so, and special thank to Theodore who single-handedly educated me through the process of migrating to OpenFOAM and developing butterfly. Butterfly wasn’t possible without Theodore!
As always let us know about your comments and suggestions.
Happy flying the butterfly! Happy Spring!
…
ger work.
Be aware, this release breaks file-forwards compatibility. You will not be able to open gh and ghx files saved with 0.8.0050 on previous versions, though of course you should be able to open old files without problems. If this is not the case, please yell loudly.
If you're having trouble loading Grasshopper, note that you must have the latest Microsoft C++ Runtimes installed on your machine. They can be downloaded from the microsoft website.
The new release can be downloaded from the usual location.
Here's a list of changes, additions and fixes since 0.8.0013:
File format forwards compatibility has been broken. You will not be able to open files saved with 0.8.0050 on earlier versions.
This release contains many breaking changes and GHA libraries compiled for older version may not work anymore.
Grasshopper Binary files (*.gh) are now saved as compressed data.
Grasshopper Binary files (*.gh) are now the default format.
Support for ancient versions of the Text Panel (still called Post-It from back then) has been removed.
Support for ancient versions of the Path Mapper (still called Path Lexer from back then) has been removed.
Placeholders for ancient versions of the Graph Mapper have been removed.
Gradient input parameters now show state tag icons (Reversed, Flatten etc.).
Geometry Cache name changes are now updated on every key press.
Geometry Cache name changes can now be cancelled with Escape.
Geometry Cache name changes can now be undone.
Mesh|Mesh intersection component now uses a different algorithm. The old behaviour is still available from the component menu.
Warning and Error balloons are now drawn as part of a Canvas Widget and will no longer show up in the Hi-Res image export.
Galapagos now accepts multiple fitness values. The true fitness will be the average of the collection.
Galapagos wires are drawn much fainter when the Galapagos object is unselected.
Medium fast redraw mode in Galapagos now immediately redraws instead of at the end of each generation.
Redesigned all Grasshopper file format icons and added larger size icons for high-dpi explorer views.
Redesigned the Most Recently Used files menu, it should now display much quicker.
Compass widget has been rewritten in an attempt to increase display performance.
Added preferences section for Compass widget.
Added preferences section for Align widget.
Added preferences section for Default Preview colours.
Added preferences section for Document Preview colours.
Added preferences section for the Most Recently Used files menu.
The Area component now accepts Breps, Meshes and Planar Closed Curves.
The Area Centroid component now accepts Breps, Meshes and Planar Closed Curves.
The Volume component now accepts Breps and Meshes.
The Volume Centroid component now accepts Breps and Meshes.
Added Merge Faces component (Surface.Util panel).
Added a Mesh Smooth component (Mesh.Util panel).
Added a Curve Seam component (Curve.Util panel).
Added Interpolate Curve With Tangents component (Curve.Spline dropdown).
Added GrasshopperFolders command to open Settings, Components and UserObject folders without loading the core plugin.
The window that reports on certain Loading Errors now has a Copy button.
Added Simplify post-process filter to parameters (in addition to Reverse, Flatten and Graft).
Parameter post processes (Reverse, Flatten, Graft & Simplify) can now also be assigned to output parameters.
Version History window now has formatting (not happy with this, I'm working on something better).
The Process Info window is gone.
Main menu has been redesigned.
Canvas toolbar has been redesigned.
Canvas context menu has been replaced by a Radial Menu.
Canvas now has a radial menu which will pop up on Middle Mouse Button clicks.
It's possible to switch between Radial and Legacy menus in the Preferences (Interface.Canvas section).
'Save As Copy' feature has been replaced by 'Save Backup' which is a GUI-less save including date+time stamp.
Added a 'Show in Folder' item to the File menu.
AutoSave settings are no longer available from the File menu, you now need to use the Preferences.
Selection shifts now also modify the view so you can use Ctrl+Left and Ctrl+Right to navigate up and downstream.
Mesh Edge display can now be toggled with Ctrl+M.
Preview modes now have shortcuts (Ctrl+1 = no preview, Ctrl+2 = wireframe, Ctrl+3 = shaded).
Solution States now have a default name.
Data Viewer window now responds to all required events.
Data Viewer window can now handle input and output parameters as well.
Canvas Navigation pane can now be dragged using the icon in the upper left corner.
The Persistent Data Editor has been redesigned.
It's now possible to select multiple items in the Persistent Data Editor list and edit their properties.
It's now possible to drag multiple items at the same time in the Persistent Data Editor list.
Item addition to the Persistent Data Editor is much improved.
The Persistent Data Editor is now non-modal.
The Canvas would remain black upon maximizing the Rhino window, this is fixed.
Sliders would cause multiple updates under certain conditions, this is fixed.
Digit Scrollers would cause multiple updates under certain conditions, this is fixed.
Pipes were inside out. This is fixed.
The curve component would not adjust invalid nurbs degrees, this is fixed.
Curves referencing Brep edges failed to load, this is fixed.
Points referencing Brep edges failed to load, this is fixed.
Referenced dlls in the VB/C# components sometimes resulted in invalid imports statements, this is fixed.
Pasting geometry in Rhino would cause a recompute of the Grasshopper solution, this is fixed.
Importing a file into the Rhino document would cause a recompute of the Grasshopper solution, this is fixed.
Galapagos would trigger superfluous solutions, this is fixed.
Mesh Solid Difference had a wrong name and description, this is fixed.
Several menu items were not greyed out despite not being usable, this is fixed.
The position and size of the Grasshopper window failed to get stored on Rhino shutdown, this is fixed.
The Persistent Data Editor would crash on parameters that did not support data proxies, this is fixed.
I'll add some additional information regarding some of the new UI features in subsequent posts.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…