Meeting Agenda:
1) Discuss what the group would like to learn this term through our regular scheduled meetings. Topics include the priority and sequence of Grasshopper exercises we would like to explore during the winter term from http://www.digitaltoolbox.info/grasshopper_basic.html and Processing tutorials from the Processing Handbook I received from MIT.
2) Watch the Matt Storus Church Machine video and have a discussion about parametric and generative tools in design.
If you have a chance, please read the following article by Tim Love called Between Mission Statement and Parametric Model at:
http://places.designobserver.com/entry.html?entry=10757
3) Discuss a possible design build project over the following winter and spring terms using the skill set this group is developing. Conversation led by Chris Nielson (please see comments below for a brief backstory)
4) Discuss possible applied research and design work for the National Conference on the Beginning Design Student paper, Machine Craft and the Contemporary Designer: exploring parameters and variables through making physical artifacts. I wrote the attached abstract and submitted it for the conference the past fall and it was accepted. To continue with the research I need to assemble a team of students that will help explore the principles I set forth by making physical objects with the cnc router. In exchange for helping with the research I will show participants how to use the cnc router, how to author machine code and provide you with the cnc controller interface software necessary to simulate machine movements. Not to mention, your work will be sited in the research paper I present at the conference at UNC Charlotte in March. More tomorrow night, of course.
Thank you for your interest and I hope to see you there.
Sincerely,
Erik Hegre
Chris Nielson Reply by Eugene Parametric Society on January 7, 2010 at 12:02pm
All,
In response to Erik, who requested that I describe my intentions in a design-build project and to the article posted (definitely required reading for this group) I propose that we begin development of a project that spans the realm of "sustainable social" architecture and parametric design. The particulars of such a design do need to be made concrete, and it will be important to define the goals of such a project.
Therefore, I would suggest that this serve as a forum for the next few weeks for those interested in producing a built project. I agree with Nico that it may not be feasible to create the built piece, whatever it may be, this term; however we should have the groundwork and a plan in place by the end of the next 10 weeks.
Either way, I would ask that everyone who is interested to please provide as many concepts to this forum to begin a discussion. If you are indeed interested, please submit goals that this project could achieve (energy, socially, aesthetically, economically, related) and perhaps what you envision the project to physically be (shading device, public bench, water catchment, interactive thermal contraption, etc . . . )
I look forward to hearing your thoughts!
Cheers,
Christopher…
imes. Your loop should go to y.Count - 1. Or, you could use a For...Each loop, circumventing the problem altogether:
Dim shortLines As New List(Of Line)
For Each segment As Line in y
If (segment.Length < x) Then
shortLines.Add(segment)
End If
Next
A = shortLines
--------------------------------
Another problem is this line of code:
New_Lines.Add(New_Line)
It is located inside the loop but outside the If statement, meaning it gets run every single iteration. This fills up the short line list with duplicates.
-------------------------------
Here's something else which is redundant:
Dim Input_Line As New Line
Apart from the fact that you don't need a special variable for this at all, you also don't need to add a New keyword. The type Line in RhinoCommon (just like Point3d, Vector3d, Plane, BoundingBox etc. etc.) are Structures, not Classes. Structures always exist when they are defined, whereas Classes can be null ("Nothing" in VB).
-------------------------------
Some more advice:
Dim i As Integer
For i = 0 To y.Count()
You can merge these two lines into one. VB.NET allows you to declare your iteration variable inside the loop:
For i As Integer = 0 To y.Count - 1
--------------------------------
If you don't like the For...Each approach at the top of this answer, here's how to write this using a For...To loop:
Dim shortLines As New List(Of Line)
For i As Integer = 0 To y.Count - 1
If (y(i).Length < x) Then
shortLines.Add(y(i))
End If
Next
A = shortLines
ps. A personal preference of mine is that I always encase the expressions inside If...Then statements in brackets. You technically don't need to do this, but I find it makes the code more readable.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
itects are at the spoke of a number of different specialties, and their work affects many different people. It's not like an architect is a painter, whose work may offend or upset the occasional viewer. As an architect you have a responsibility to produce quality work. How can anybody trust you with this responsibility if you're taking a purely artistic approach? What guarantees do you have that your clients money won't be spend on a poorly designed project if you can provide no rational for why your design is the way it is?
2. What is any sense in purely architectural discourse?
I don't get. Discourse is there to flesh out problems and agree on solutions. It might not always accomplish that, but what's the difference between talking about architecture as opposed to any other topic?
3. strictly looked, can be determined sense generally in a purely architectural discourse?
I'm sorry I don't understand.
4. What is purely architectural discourse?
I imagine it's having a discussion where you only talk about architecture?
5. What is Funktionalismus or Rationalismus without philosophical support?
Functionalism and Rationalism are ideologies. Some would even call them methodologies. They are inherently philosophical things as they are nothing more than a collection of ideas and views. As a society we've decided that a certain level of rationalism is a good thing. The Enlightenment continued this trend after the Dark Age hiatus and it quickly led to a large number of very tangible benefits for almost everyone.
I'm not arguing for or against Functionalism as an architectural style. I'm asking for a measure of rationalism in our academic process.
6. Would not be the pure functional fulfilment empty ?
Let's find out. In the meantime I'll settle for a little functionalism.
7. Would be not a critical position on the promise of purely rational algorithms applied?
Algorithms and algorithmic design are rational in the sense that they do not allow for ambiguity. But that doesn't make them rational in the real-world sense. These are not the same kind of 'rational's. I can make an algorithm that produces total nonsense, but does so completely reliably. I can also use an algorithm in a setting for which it wasn't intended, thus invalidating the results.
This is actually the crux of the problem. Which algorithms does one use to solve a problem and what data do they require? If you can't answer this question or if you do not understand the algorithms you are using (at least on a superficial level) then I'd say you have no business using them.
--
David Rutten
david@mcneel.com
Tirol, Austria…
Added by David Rutten at 12:48pm on August 19, 2013
on excel (leaving 0,0 cell blank and also making sure there are no commas in the names ) Also let's call the names "ID"
2 - For the weight, use numbers ranging from 1 - 10 where 10 is the highest dependancy.
3 - Save the file as a Unicode CSV from excel
4 - Create another file on excel that has the attributes of your spaces, with the names of your spaces under the header ID (let's start with a simple "area" and "SNo" attribute but you could add more features for sorting and manipulating your data)
5 - Open Gephi and further open your matrix CSV file
5 - Import it as "," (comma delimited file) and make sure you check "matrix" for the data type
6 - Ensure the import is nondirectional as well (or Gephi adds silly arrows)
7 - Not gonna go into the gephi bit too much but select a force atlas layout and set the force to something high 1000 or 10000 depending on the size of the data and the attraction to a 1000th of that 1 or 10. Go to the data lab and import your excel with the attributes and append to your existing datasheet.
8 - Set the node attributes to use the area for the node size and color scheme to SNo
9 - Play around with all the layout options and finally go to your preview. Once you're happy with it, export it to a GDF graph file.
the GDF now has the coordinates of the circles and the diameters. as well as the edge connections.
I've written a very amateur script that converts this to GH geometry (below)
Hope this helps someone out, I'm still figuring out the gephi streaming API but I've only started with python about a month ago so might take a while to get there.
You can use the second half of the GDF files to also create dependency chord diagrams online as shown in the third image.
https://flourish.studio/2018/07/25/how-to-make-a-chord-diagram/
Cheers,
Sanjay
…
onsidered period.
Even if the end of July for the mediterranean climate is not the best period to perform an adaptive comfort analysis (it's just a pretest to define a LB model) I want to refine the Adaptive comfort Chart (AC) by changing the external air temperature data imported from the .epw file with that of monitored data as reported here below:
Where the monitored ext air temperature are in this form (green panel below):
I have used the comfortPar component to set the following parameters:
Adaptive chart as defined by EN 15251
90% of occupants comfortable
the prevailing outdoor temperature from a weighted running mean of the last week
fully conditioned space (even if it is not properly in line with AC as already discussed)
The question is this: the AC component could correctly apply the code below if there is only a list of external temperature data for a restricted period (without indication about the limits of this period) and not for an entire year?
else: #Calculate a running mean temperature. alpha = 0.8 divisor = 1 + alpha + math.pow(alpha,2) + math.pow(alpha,3) + math.pow(alpha,4) + math.pow(alpha,5) dividend = (sum(_prevailingOutdoorTemp[-24:-1] + [_prevailingOutdoorTemp[-1]])/24) + (alpha*(sum(_prevailingOutdoorTemp[-48:-24])/24)) + (math.pow(alpha,2)*(sum(_prevailingOutdoorTemp[-72:-48])/24)) + (math.pow(alpha,3)*(sum(_prevailingOutdoorTemp[-96:-72])/24)) + (math.pow(alpha,4)*(sum(_prevailingOutdoorTemp[-120:-96])/24)) + (math.pow(alpha,5)*(sum(_prevailingOutdoorTemp[-144:-120])/24)) startingTemp = dividend/divisor if startingTemp < 10: coldTimes.append(0) outdoorTemp = _prevailingOutdoorTemp[7:] startingMean = sum(outdoorTemp[:24])/24 dailyRunMeans = [startingTemp] dailyMeans = [startingMean] prevailTemp.extend(duplicateData([startingTemp], 24)) startHour = 24
…
and enhancing its intrinsic qualities.
The program of the workshop consists of an intense exploration of Günther Domenig’s Steinhaus (situated at Ossiachersee in Carinthia, Austria) and it’s visible and hidden properties. By the use of mapping strategies these properties can be isolated and will be implemented as a temporary installation.
Each participant will investigate certain spatial aspects using methods of mapping.
In a series of tutorials on various techniques, strategies will be developed to translate and structure the collected information into a unified spatial concept. Participants will work amongst groups to propose the result of their investigations with a site specific installation which will be digitally materialized on site.
Complementary program:
lecture by Stefan Rutzinger & Kristina Schinegger, soma
guided tour and lecture about Steinhaus and Günther Domenig by Christian Halm
presentation by Clemens Preisinger, karamba
Closing event and presentation
250€ early bird registration (until June 14th) | 300€ (until June 28)
More information at www.semf.cc
Email us at info@SeMF.cc…
(Boundary Representation]. Thus a Brep is 2 things: the underlying "guide" surface and "regions" that do the massacre.
2. As delivered and if you chose the equivalent boolean some Delaunay faces are removed from the mesh IF their center (the projection in an automated made "min" plane) is contained (is inside) to a giiven hole. Now ... the anchors ARE not the white points ... they are their projections on the terrain (the red ones). Thus proper springs "pull" the white points towards the red ones.
3. Max span is a term used in that ugly part of life (the real-life) and indeed refers to some distance between mount points. For instance the Golden Gate has a max span of 1280 m. Span means money and big span ... er ... means lot's of money (even on trusses, considerably less so in tensile membranes).
5. Coding is like riding properly a proper Ducati (avoid the 999 at any cost): easy provided that you can ride it. Lethal in any other situation. But the good (or bad) news are that girls don't ride that type of bikes.
6. This makes me entirely off-topic > Oops > anything that I do/think points directly or indirectly (in most of the threads in this Forum) towards real-life AEC thingies. I never (ever) think within an Academic/Theoretical framework. BTW: Avoid social networks > or say hello to Skynet (or lobotomy).
7. You are very kind.…
ow the steps of the successful run when step 1.2 is bypassed (note that the and OpenFOAM session is open in the background while running the Butterfly demo file):
1. create wind tunnel, and use different parameters of (4,4) for _globalRefLevel_ as suggested by Theodoro in this post
2. run blockMesh:
3. run snappyHexMesh:
4. run checkMesh:
5. connect the case from checkMesh to simpleFOAM and run the simulation:
6. the simulation converged at 1865 iteration, but the results visualization part has some problem:
7. so I revised this part according to suggestions from Hagit:
8. and the results can be visualized for P and U values:
The GH file used for the successful run shown above is attached here.
Now, the following is the error I got when the case from the update fvScheme component is used for simpleFOAM simulation:
the warning message on the simpleFOAM component is:
1. Solution exception: --> OpenFOAM command Failed!#0 Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #1 Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #2 ? in "/lib64/libc.so.6" #3 double Foam::sumProd<double>(Foam::UList<double> const&, Foam::UList<double> const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #4 Foam::PCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #5 Foam::GAMGSolver::solveCoarsestLevel(Foam::Field<double>&, Foam::Field<double> const&) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #6 Foam::GAMGSolver::Vcycle(Foam::PtrList<Foam::lduMatrix::smoother> const&, Foam::Field<double>&, Foam::Field<double> const&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::PtrList<Foam::Field<double> >&, Foam::PtrList<Foam::Field<double> >&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #7 Foam::GAMGSolver::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #8 Foam::fvMatrix<double>::solveSegregated(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libfiniteVolume.so" #9 Foam::fvMatrix<double>::solve(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #10 Foam::fvMatrix<double>::solve() in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #11 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #12 __libc_start_main in "/lib64/libc.so.6" #13 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam"
The error message from the readMe! output node is attached below as a text file.
Hope you can kindly advise what the important steps or parameters I might have missed here. I assume it might be related to OpenFOAM rather than with the Butterfly workflow...
Thank you very much!
- Ji
…
) Course Fee: Professional EUR 825,- (+VAT), Student EUR 415,- (+VAT)
Led by plug-in developer and structural engineer Clemens Preisinger, along with Zeynep Aksoz and Matthew Tam from the expert Karamba3D team, this three-day workshop will focus on methods of setting up structural systems in the parametric environment of Grasshopper. The participants will be guided through the basics of analyzing and interpreting structural models, to optimization processes, and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D. However, advanced users are also encouraged to apply. It is open to both professional and academic users. For beginner users of Rhino and Grasshopper, there will be an optional introductory course one day before the Karamba3D course.
Karamba3D 1is a parametric structural engineering tool which provides accurate analysis of spatial trusses, frames, and shells. Karamba3D is fully embedded in the parametric design environment of Grasshopper, a plug-in for the 3D modeling tool Rhinoceros. This makes it easy to combine parameterized geometric models, finite element calculations, and optimization algorithms like Galapagos.
Course Outline
Introduction and presentation of project examples
Optimization of cross sections of line-based and surface-based elements
Geometric optimization
Topological optimization
Structural performance informed form finding
Understanding analysis algorithms embedded in Karamba3D and visualizing results
Complex workflow processes in Rhino, Grasshopper, and Karamba3D
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 participants is required for the workshop to take place. The workshop will be canceled if this quota is not filled by October 28. The workshop will be taught in English.
Course Requirements
Basic Rhino and Grasshopper knowledge is recommended. An introductory course is offered.
No knowledge of Karamba3D is needed. Participants should bring their own laptops with Grasshopper and either Rhino 5 or Rhino 6 installed. You can download a 90-day trial version of Rhino. Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
Please register here……
Added by Matthew Tam at 6:38am on September 13, 2019
unity in Ukraine, which is orientated to contemporary architecture.
The results of CANactions will be published in ACC magazine (link), on the web-sites of “Architectural club” (link), AB "ZOTOV&CO" (www.zotov.com.ua),
Theme
Theme of CANactions 2009 is emergent design techniques.
This theme could include following architectural branches as Digital design, sustainable architecture and other sectors, which by the participants’ opinions, could be EMERGENT.???
Any architectural projects made earlier of specially for the CANactions’09 are allowed for submission.
Presentation
All the projects will be submitted in two phases:
Phase 1 – selection of 10-15 participants of CANactions.
Project has to be sent by e-mail to: (__) in PDF (not less then 300 dpi, not more then 10 Mb).
Phase 2 –the CANactions participants prepare 15-20 min presentation of their projects (screen projector, microphone) and materials for the exhibition in House of Architect, Kyiv. The project has to be presented by author. -> exhibition is the first architecture biennale
Presentation requirements: file should be composed in PDF format on A0 sheets, placed horizontal (not more then 1 sheets). This file should contain sufficient amount of the presentation graphic material, including text explanation up to 300 words.
The raster images should have printing definition not less then 300 dpi. It’s recommended to avoid solid black fillings, because the projects will be printed on ink-jet printer.
The presentation requirements could be changed after phase 1 results.
The presentation materials should be made in Ukrainian (or Russian) and English. Verbal part can be presented in any language.
Tarek Naga, Naga Studio, Los Angeles / USA (I can contact him - he will do it for free)
Awards
DIA (Dessau Institute of Architecture), Germany gives a prize: certificate for the education for 1 (2) semesters of Master-program in DIA for students and young architects (up to 30 years) from Ukraine. The decision about the prize winners will be made by selection board.
Guests presentations
- Daniel da Rocha DIA /Germany/ (flights, accommodation?). Theme: (scripting???)
- Aleksandr Kalachev DIA /Riussian Federation/, Tudor Cosmatu DIA /Romania/, Irina Bogdan DIA /Romania/ - "Parametrically Defined Urban Patterns".
- Grygorii Zotov DIA /Ukraine/ - “The Multicultural Columbarium”.
- Armen Menendian /USA/ - "Blending Parametric Methods With Traditional Design:
"The Danish Pavilion at Shanghai EXPO 2010".
Exhibitions
1. Projects of 10 (15) CANactions participants
2. other projects: Zotov+Co
Bollinger+Grohmann - structural eng.
the very many
C-Space Pavillon / alvin huang
ala _ amanda levete studio
anOtherArchitect
student work, Charles Walker, AA Unit Pavillon
Event schedule
Phase 1: 01.07.2009 – start of the CANactions 2009 and beginning of projects submission.
16.08.2009 - dead-line of the project submission of phase 1.
Phase 2: 17.08.2009 – announcement of the CANactions 2009 participants.
30.08.2009 – dead-line of submission of the CANactions 2009 exhibition materials.
14-26.09.2009 – exhibition of the CANactions 2009 projects in House of Architect, Kyiv.
25-26.09.2009 – CANactions 2009.
26.09.2009 - finnissage / announcement of competition winners for DIA study
Contacts: canactions2009@gmail.com…
Added by Grisha Zotov at 6:32am on August 10, 2009