n due at the end of march. i am hoping to see if i can do this as a sort of "HIVE MIND" experiment with one or two or more posters to the forum. i have uploaded two files to http://www.formpig.com/nine_bar-FAR and I have the following goals:
1. To "kinematically iterate" various formal building envelopes based upon a 50' x 100' lot that "conform" to the nine bar linkage geometry.
2. This lot would have "setbacks" consisting of two 5' side setbacks, a 10' rear yard setback and a 25' front yard setback. max height on the structure is 32' and the allowable overhangs into the setbacks are 2'. I would like to find a way to use the "nine bar geometry" to construct a series of iterations for "floors", "walls" and "ceilings", which would then be tied to a volumetric (cubic volume), or a total square footage (perhaps based upon two horizontal section cuts) which was based upon a given number that I will provide per local building code.
3. Laid on top of this we would also have "mcmansion ordinance" requirements based upon the pdf enclosed. i expect to have this "tent restriction" data in digital form to upload to ftp shortly.
It would be up to you individually or collectively to determine how best to position this "in the real world" based upon the lot, setbacks, zoning requirements etc. For instance, perhaps the nine bar configuration has its vertices coplanar with the 50' x 100' x 32' envelope restrictions and then the chosen volume is "trimmed' by the setback requirements. Or perhaps the nine-bar configuration is generated completely within the setbacks, or perhaps it is generated 2' outside of the setbacks so as to take advantage of the 2' overhang allowance on the setbacks, etc.
*
Given an opportunity to develop the work in a second phase we would have an opportunity to tie this into various efficiencies such as Bill of Materials (wall floor and ceiling square foot calculations), envelope to volume calculations, solar panel efficiencies (solar orientation and envelope geometry) etc, etc (love to get suggestions for this).
*
I've become /really/ convinced that this would be a /really/ interesting entry based upon my just finishing up Kas Oosterhuis' Towards a New Kind of Building: A Designer's Guide for Non-Standard Architecture". In an ideal world I was hoping that it would be possible to hash this out discussion-wise and then literally passing it around on the list after someone eventually made the first move by tossing out a rough ghx script. My expectation would be to finalize it rapidly in the next two weeks. Something of a contemporary version of a design charette.
However, I realize this may not be workable so if you have experience in this arena and particularly if you think this is a brief that is straighforward enough to be almost literally implemented in Grasshopper, please contact me for any wage and/or contract fee requirements.
I'm getting a bit of a late jump on this but my hope is that with the right participant(s) that I can thrash it together quick enough for the first round.
info@formpig.com…
case for sure (started by Giorgio a couple of days before). Ive got involved because I exploit ways to "relax" shapes on nurbs (say patterns created by Lunchbox or "manually) without using any kind of mesh (more explanations soon).
Here's 5 test cases (SDK appears that doesn't have some "thicken surface" thing ... thus the algo that finds the "whole" shapes is rather naive) VS 2 Kangaroo "methods" and the why bother (he he) option as well.
If the goal is to "fit" these shapes within the nurbs ... does it work so far? No I'm afraid (appears that "springs" used are not the proper ones - or [Kangaroo1 option] the lines that pull should been originated from valance 2 points only)
Tricky points:
1. Internalize appears having a variety of serious issues (see Input inside definition) - Load Rhino file first (but even so ...).
2. Pull to surface is deactivated - this is not the issue here (and it's very slow).
3. Since Starling/WB alter the "curves - points" related order
the issue here (Pull points to curves) is to correspond apples to apples:
and that's what Anemone does:
From chaos :
to order:
this means that prior activating Kangaroo you should double click to the Anemone start component in order to "sort" properly the curves.
But .. fact is that results are pathetic:
more soon
best, Peter…
putational Planning Group (CPlan) and is a result of long term collaboration between academic institutions and praxis partners across the globe with the common goal to increase the efficiency and quality of architecture and urban planning.
For additional information, updates, examples and tutorials please visit DeCodingSpaces-Toolbox.org
Authors
Abdulmalik Abdulmawla1,
Martin Bielik1,6,
Peter Buš2,
Chang Mei-Chih2,
Ekaterina Fuchkina1,
Yufan Miao4,
Katja Knecht4,
Reinhard König1,4,5,
Sven Schneider1,3,6
Partners
Member institutions of the Computational Planning Group (CPlan):
1Bauhaus-University Weimar (Chair Computer Science in Architecture, Chair Computational Architecture)
2ETH Zürich (Chair Information Architecture)
3Emerging City Lab - Addis Ababa
4Future Cities Lab Singapore
5Austrian Institute of Technology Vienna 6DecodingSpaces GbR
Gallery
…
Added by Martin Bielik at 10:13am on September 28, 2017
giornata inaugurale sarà dedicata alla free-lecture introduttiva finalizzata alla realizzazione di un modello d'architettura complesso attraverso l'utilizzo di comandi e tecniche avanzate di rappresentazione con Grasshopper (plug-in parametrica di Rhinoceros) e 3dsMax. Sarà illustrato inoltre il potenziale di V-ray per 3dsMax realizzando un rendering concettuale. Durante il mini-corso dell' openDAY verranno mostrate le caratteristiche e le potenzialità degli strumenti per far luce sui nuovi valori assunti dalla modellazione 3D. La modellazione 3D sta interessando un pubblico sempre più vasto inserendosi in una nuova fase di ampia disponibilità per conoscenze, software, hardware di prototipazione e modelli. Pur mantenendo tutti i suoi valori già noti la questione si è talmente ampliata fino ad interessare norme giuridiche (diritti sui modelli ,concorrenza con offerte di servizi apparentemente simili, informazioni deformate e onfusione nei media) Makers University[http://www.makersuniversity.com], in collaborazione con parametricart, vi propone un punto di vista ampio e sintetico su queste tematiche.
Al termine della free-lecture, sarà illustrata l'offerta formativa [CLICCA QUI] di parametricart riferita ai corsi che si terranno nei mesi di Gennaio e Febbraio 2013 inseriti all'interno della più ampia programmazione della Makers University. SONO PREVISTE TARIFFE PROMOZIONALI PER COLORO CHE SI ISCRIVERANNO AI CORSI durante l'OpenDAY.
La lezione e la presentazione si terranno nel nuovo spazio co-working il PEDONE.
PROGRAMMAZIONE
- I temi della Makers University [Leo Sorge];
- Modellazione della parametricTower (concept di architettura complessa) utilizzando Grasshopper, applicativo per la modellazione parametrica [VIDEO] [Michele Calvano];
- Modellazione di una copertura reticolare 3D a completamento della parametricTower con 3dsMax utilizzando tecniche di modellazione mesh complesse [Wissam Wahbeh];
- Rendering con V-ray per 3dsMax illustrando la nuova interfaccia nodale [Wissam Wahbeh].
- Question Time per chiarimenti sugli argomenti illustrati.
COME
L'openDAY sarà aperto a tutti gli interessati,completamente gratuito e sarà replicato in tre sessioni di uguali contenuti organizzate nei seguenti orari:
Sessione [1] 11,30 - 13,30
Sessione [2] 15,30 - 17,30
Sessione [3] 17,30 - 19,30
Per necessità di organizzazione è importante la prenotazione all'evento utilizzando il form in fondo alla pagina specificando nella stringa apposita, il nome dell'evento e la sessione (es. open day sessione 1) oltre agli altri dati richiesti.…
l coarse mesh
Subdividing this mesh into strips of thin quads
Relaxing/Planarizing this mesh
Splitting and Unrolling
In this post I deal with the first 2 of these stages.
You can download the example definition here:
developable_strips_tutorial.gh
Drawing the initial mesh
To begin with we need a simple quad mesh. This can be modelled manually in Rhino, and only needs to use enough quads to give the topology and very rough form. No need to worry too much about the exact geometry or dimensions at this point, as we will refine and alter it as we go.
One very important thing that we do need to bear in mind though is that all internal vertices must have even valence (I covered this a bit in the earlier post here).
So for example, this is bad:
(because the highlighted vertex is surrounded by 5 faces)
While this is good (and can still be relaxed to the same shape):
(the top and bottom vertices have valence 8, and the vertices between the arms have valence 4)
With a little practice it should be possible to convert any mesh into one that meets this condition.
The reasons why we need this condition should become more clear in the later steps.
First subdivision
This is where we choose how many strips we want our final model to have, by applying a few rounds of subdivision using the Refine component (you could also use Weaverbird here):
Sorting the face directions
While quad meshes do not carry the same information about u/v directions as a NURBS surface, the individual faces do have a sort of direction given by their vertex ordering. However, these face directions are usually not consistently arranged, especially after subdivision.
The Kangaroo MeshDirection component attempts* to orient all the faces in a mesh so that they match with their neighbours.
For example, before sorting, if we draw a line from the midpoint of the first edge of each face to the midpt of its opposite edge, we might get something like this:
Whereas after sorting, we should get something like this:
*note that I say it attempts to orient the faces consistently. In some cases no valid solution exists, for instance if 3 or 5 faces meet around a vertex, hence the requirement mentioned at the start for even valence vertices.
Directional Subdivision
Now that we have consistent face directions across the mesh, we can apply further subdivision, but this time in one direction only. So we go from roughly square quads to thin rectangles. The idea is that as we apply higher levels of this directional subdivision, the final relaxed result goes towards something semi-discrete. A NURBS surface is fully continuous, and a mesh is fully discrete (made up of separate facets), while this strip model will be smooth in one direction and faceted in the other.
Go to part 2 for the next step of the process
…
ooking for an efficient way to perform glazing of complex shapes.
I've only followed the Energy modelling workshops so far so i may have missed some essential components or workflows to achieve my needs. But i've made an attached definition with all my current attempts to get a proper HBzone with the numerous windows faces i will always have to deal with in this project.
I first thought that i was not using the HBObjWGZ correctly, then after some readings it was maybe an upgrading issue, then effectively i had my Therm 7.5 that needed to be reinstaled, but then ... I must be missing an essential HB tricks or workflow i guess ...
So I divided my attempt in two series :
- The Serie 1 : is a simplier version of the project step i'm working on but i'd be glad to achieve it first !
- The Serie 2 : is the real final direction of the project, which consist in sorting/dispatch faces to windowon one side and to an other material on the other, according to the winter sun and a pourcentage param.
Despite it is more complicated than the Serie one, it seems seems to create the same diversity of issues.
Until now, with the 5 different combinations of Serie 1, and the 3 of Serie 2, with and without using the different Glazing/window components, here are the logs i got from both HBZone component or OpenStudio component:
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** BuildingSurface:Detailed="00073E23257843B6A948", invalid Construction Name="ETFE" - has Window materials.">> Has to deal with the way i'm trying to assign too early a customized EPConstruction material ? Done it wrong ? I tried to reload it in the library but doesn't change anything...
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** BuildingSurface:Detailed="000579CD749E46DFA5EA", invalid Construction Name="EXTERIOR WINDOW" - has Window materials.">> Is it an issue in the way i define my surfs both as "WINDOW" (5) for srfType and Outdoors on the same component ?
From Create HBZone -"1. Solution exception:'EPZone' object has no attribute 'shdCntrlZoneInstructs'"
>> Happens when i try to introduce my ETFE EpMaterial after creating my first HBZone, with a Set EP Zone Construction, so this material seems to be not working either before and after trying to create an HB Zone
From Create HBZone- "1. Solution exception: 73df51a3b2144b1e858b has been moved, scaled or rotated."If you need to move or rotate a Honeybee object you should use Honeybee move, rotate or mirror components. You can find them under 12|WIP tab.
>> >> wich seems to exist in some on other thread Here and was a coding bug supposed to be fixed.
And last but not least ...
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** checkSubSurfAzTiltNorm: Outward facing angle of subsurface differs more than 90.0 degrees from base surface.2. The simulation has failed because of this fatal error: ** Fatal ** GetSurfaceData: Errors discovered, program terminates" .
I'm attaching the file with each attempt in this post. The definitions are disabled and the log already copied separatly so there is no need to compute each of them to see what's wrong.
If someone from the beginner to one of the Kings of HoneyBee has any relevant answer/solution to this attempt with complex geometry Issue it will be really nice for me so i could to move forward !!
Thanks in advance guys and have a great day !
…
y from the Rhino model and having the absorption coefficients of the materials that are entered into Pachyderm, why is it not possible to generate a reverberation time diagram, without the need to start any analysis?
MAPPING METHOD: When for example the mapping of the Strenght Index (G) is generated through the "create map" option, succesively I can´t generate any other energy criterion map, but I have to redo the simulation.
Is it a limitation of the software or am I wrong something?
MAPPING METHOD: I kindly wanted to ask what is the difference between minimum and detailed convergence and why the number of reflections order it takes into account for the simulation is not specified. The mapping method take care only of the Raytracing Method or the Image Source too?
MAPPING METHOD: Why is the mapping value that can be exported to Rhino not generated for all the calculation raster points, but maximal only for 100 values?
MAPPING METHOD: This method hasn't been implemented in Grasshopper yet, has it?
RAYTRACING METHOD (Pach:RT): I did a raytracing through the components of GH, using only the Pach_RT, and I had these curious results in terms of time:
RaysCount: 15.000, IS_Order:1 = 5min
RaysCount: 15.000, IS_Order:2 = 12min
RaysCount: 15.000, IS_Order:3 = 3min
RaysCount: 15.000, IS_Order:4 = 8min
RaysCount: 15.000, IS_Order:5 = 3min
Why a raytracing with only 2 order, is more and more extensive than the 3/4 and 5 order?
ANALYSIS RESULT: Would there be a way to export all the results of a simulation, as is done via Odeon, to a .txt list?
I apologize in advance for asking so many questions, I hope you can find the time to answer,
Yours sincerely from Müller-BBM…
e following tutorial: http://digitaltoolbox.info/grasshopper-intermediate/offset-scale/
I think the beginning is correct because I have the same things. However, at the last step I can't correctly generate the tabs for assemble this shape. I try to put "flatten" everywhere but it doesn't work ... If someone just give me a little help please ? Or check if everything is okay? Or if there is an another tutorial ? Or if the question has already been asked in this forum ? I take! I'm really sorry if my problem is not very interesting but I'm new ... Yours, Anna, windows 7 on bootcamp Rhino 5 Grasshopper O.8.0063
Files :
Shape.3dm
Shape.gh
…
can work in any node of a given hierarchy tree (loaded in your work session) by making the node "active". "Nodes" can be other things as well (like workplane, clip definitions etc).
Why to do that weird thing? Well, think any design being "flat" > meaning that all objects are placed in a single file (and in a single layer). Not that good > although the items are present you barely can handle them (because power is nothing without control, he he).
Let's go one step further: we can start classifying objects in "groups" (like a directories/files organization in any O/S). This means, in MCAD speak, creating assemblies (a void thing kinda like a directory) that contain components/entities (kinda like files).
Several steps further we end up with severely nested "arrangements" of entities (an assembly could be parent of something and child of something else).
For instance, it could be rather obvious the logical classification of a "geodetic" (so to speak) structure like this : a 40000m2 "hangar" defining some thematic park.
I mean : a void master that owns 4 equal void segment sets that own 4 "legs" that own various geodesic structural members + cables + membranes + you name it etc etc.
Each "leg" owns the concrete base (Shared) and a rather complex set of objects.
Notice that some tensile membrane "fixture" combos (see above)...act as perimeter light fixtures as well...meaning that the membrane tension plate may could be a child of a void "light" parent...or may could be a "stand alone" assembly etc etc.
These arrangements can be internal (belonging in, say, a x node within the current active file) or external (belonging in a y node within another file). If they deal with the same (topologically speaking) object they define clusters of Shared entities (or variations)- where only the view transformation matrix changes (in the simple scenario, he he). For instance the disk shown above is a Shared Assembly that owns the bolts, the plates, the tension member etc etc. Selective Instancing allows modifying some attributes without affecting the topology (i.e. the geometry).
The whole (terrible) mess is controlled by some tree like "dialog" (in Catia is "transparent") that is called Structure Browser. By controlled I mean (1) display/display mode with regard any tree member combo/selection set (assembly and/or component) in any View (2) clip state control (3) active status (for modifications/variations) (4) workplane control (5) drag and drop ownership control (6) ....
Now...what if I would chan…
this occasion, but it could be converted for DT in no time). Requires some minutes more as regards ... some things, but the usual update is due to some days.
Bad news: it's C#
Good news: User's Manual :
1. That thing (the C#, not me) after sorting (in a "sequential way", so tho speak) the panels (their order was chaotic) allows you to start the massacre by locating a focus of interest (and the user controllable +/- Range derived from it).2. The Range is variable (obviously) and takes care not to exceed the indices of the panel list (OK, that's elementary).
3. If you click the right button (Sadistic Q: where is it? he he) things are deleted and a new constantly self-updating list is your new List. Thus the massacre of panels is totally controllable. An autoZoom thing is also included (free of charge, but it's a bit nerve braking). Zoom factor is variable as well.
4. Then you move over (via the index slider) and start the massacre again. Notice the change of Range.
5. If you turn begin to false (initialization) and then begin to true > start all over again.
6. The other C# thing allows you to increment the index slider in a rather more convenient way. It's a bit weird: it uses delegates (A delegate is an object that knows how to call a method) and events (An event is a construct that exposes just the subset of delegate features required for the broadcaster/subscriber model - but don't ask what this means, he he) in order to talk with your slider (with a defined NickName) and perform the required value control.
NOTE: without realizing it you've just (indirectly) asked one of the most important questions even exposed in this Noble Forum. I hear you : what question? Well ... wait some days for the mother of all threads: "Total control in collections on a per Item basis"
may the Force (the dark option) be with you (and me)
best, Peter…