he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
new component "OSM 3D roof"):
2) Simplified 3D roads can be created by using the network of OSM polylines (through new component "OSM 3D road"):
3) 3D forest.Up until now, Gismo supported generating a single 3d tree whenever such tree was present in openstreetmap.org database. Now it is possible to generate 3d trees in forest areas, by randomly positioning the 3d trees (through new component "OSM 3D forest"):
4) Boolean 3d shapes.Gismo's "OSM 3D" component generates shapes as parts: for example, if a building has irregular shapes across its height, they will all be created individually. Trying to merge them with Grasshopper's "Solid Union" component can sometimes fail.New Gismo "Rhino Boolean Union" components tries to overcome this issue by using a much better Rhino version of this command.
5) Library of common GIS color palettes (gradients).A single component containing 22 of the common color palettes used in GIS applications as ArcGIS and QGIS. For example: elevation, aspect, precipitation...
6) Url to location.Thanks to idea by Alex Ng, it is possible to extract location from a link of the following map websites: Openstreetmap, google maps, bing maps, wego.here, waze:
Version 0.0.3 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
Example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
New suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 1:39am on January 29, 2019
as the design table? I think this could be 'drawn' and constrained in Inventor in a lot less time. I know the GH model would have a lot of flexibility, but in this case, what can you do with it that wasn't provided by an Inventor model?
Only the 27 lines mentioned were modeled in Rhino, the rest is modeled with GH.
The 5 hrs involved thinking about the approach, defining vertical lines, tilts, elevations, pitch of the roof, intersections.
Once I had decided what my approach would be, and tested the logic with those first lines, points and data path arrangements, it only took one more hour to get to this:
Which is actually quite fast, compared to MCAD workflows.
If you already have components (columns, beams, etc.) modeled and ready to drop into a project, of course it is lightning fast to model simple projects like this example.
I am not as much interested in those situations, because improving efficiency is straightforward and obvious.
I'm more interested in situations where there are no pre-defined families of objects, in which case you need to start from scratch.
The GH model I'm showing is modeled from scratch, except for the 27 lines in Rhino.
Here's one obvious advantage to modeling with GH, once the definition is set-up, it's virtually effortless to change inputs and alter the overall design. Here's an example, lets say we wanted to extend the roof 3 more units, curling away from the original direction.
Plan view before:
And after:
An MCAD app will also allow you to do this, as long as the location of additional elements follows the existing geometric method of definition. What happens if you want completely change the way you locate columns, roof slope, intersection points?
In MCAD, you'll need to re-model the underlying geometry, which will take the same effort as the first round. In GH, this process is not only much faster, it's open to algorithmic approaches, galapagos, etc. and it just takes some simple re-wiring to have all down-stream elements associate themselves to this new geoemtric definition.
For instance, here's the same definition applied to two curves, which are divided in GH, the resulting points are used as a starting point for lines directed at normal from curves.
This is not so easy to do in MCAD.…
Added by Santiago Diaz at 7:55pm on February 24, 2011
occur more than once in the same list, and different elements with identical values can occur more than once. Also, a list may contain lack of elements, referred to as "nulls".
Sets. Strictly speaking a Set is a mathematical construct which adheres to a strict collection of rules and limitations. Basically, a Set is the same as a List, with the exception that it cannot contain the same element more than once, or indeed two or more different elements with the same values. You see, in mathematics there is no difference between a value and an instance of that value, they are the same thing. In programming however it is possible to store the number 7 in more than one spot in the RAM. Grasshopper does not enforce this rule very strongly though, you can use a lot of Set components on lists that have multiple occurrences of the same value. The big difference between Lists and Sets in Grasshopper is that Sets are only defined for simple data types that have trivial equality comparisons. Basically: booleans, integers, numbers, complex numbers, strings, points, vectors, colours and intervals. Lists can contain all kinds of data.
Strings. Strings are text. There's nothing more to it. I don't know why early programmers chose to call them strings, but I suppose it's a better description of the memory representation of them. Strings are essentially sequences of individual characters.
Trees. Trees are the way all data is stored in Grasshopper. Even when you only have a single item, it will still be stored in a tree. A tree is a sorted collection of lists, where each list is identified by a path. A specific path can only occur once in a tree, when you merge two trees together, lists with identical paths are appended to each other. Trees are an attempt to losslessly represent not just the data itself, but also the history of that data. Imagine you have 4 curves {A,B,C,D} and you divide each into 3 points {X,Y,Z}. Then, for each of those points you create a new line segment {X',Y',Z'} and then divide each of those line segments again into 5 points each {K,L,M,N,O}. The way data is stored in trees, it should be possible to figure out whether a point M belongs to X' or to Z', and whether that X' or Z' came from A, B, C or D. This is why paths are often quite long after a while, because they encode a lot of history.
Paths. A Path is nothing more than a list of integers. It's denoted using curly brackets and semi-colons: {A;B;...;Z}. A Path should never be empty {} or have negative integers {0;-1}, but it is certainly possible to create a path like this and it probably won't even crash Grasshopper. Paths are 'grown' by components that (potentially) create more than one output value for a single input value. For example Divide Curve. It creates N points for every single input curve. In cases like this a new integer is appended to the end of the path.
In the next release the Path logic in Grasshopper is somewhat different. I fixed a number of obscure bugs (hopefully without introducing new fresh bugs) and special cased certain operations to somewhat reduce the speed at which paths grow. This may well break files that rely on a specific tree layout, but I hope the temporary sacrifice will be worth the long-term benefits.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
http://www.pilkington.com/) dominates the planar market. Charges "around" 1K Euros per m2 for a "plain" system. Personally in bespoke projects I design my own stuff but due to economies of scale ... they cost a bit more (but they look far more sexier, he he) . On the other hand only in a bespoke project I could dare to suggest such a solution (for a large scale building we are talking lots and lots of dollars).
3. Several scales below (aesthetics) you can find static alu systems (either structural or semi-structural):
Or hinged systems (either structural or semi-structural) capable to adapt in contemporary double curvature facades/roofs/envelopes/cats/dogs etc etc ... pioneered worldwide many years ago by my best friend Stefanos Tampakakis (everybody in UAE knows that genius man: http://www.alustet.gr/company.html):
4. With the exception of some paranoid things that Guru Stefanos does for Zaha these days we are talking about planar "facets" (obviously a triangle is such a planar facet). The current trend is: the more edges the better (humans excel in vanity matters). But achieving planarity in, say, quads (like yours) it adds another "restriction" on what you are doing. Until recently Evolute Tools Pro was the only answer. But right now ... well let's say that in short time you'll be greatly surprised by some WOW things in this Noble Forum, he he.
5. MERO (and obviously custom systems) can adapt (at almost no extra charge) in anything imaginable. But in a bespoke building ... well.. you know ultra rich people: they don't want MERO anymore since "everybody" does MERO solutions. Vanity, what else?
6. Smart Glass would become a must in the years to come: Eco-Architecture MUST dominate everything you do. On the other hand spending millions to do some extra WOW stuff (Vanity) ... it doesn't look to me very Eco-Friendly/Whatever ... but let's pretend so, he he.
7. I'm Architect but a bit different from the norm: for instance I smoke cigars (highly politically incorrect stuff) I always talk openly (ditto) and I ride lethal bikes (ditto).
may the Force (as always the Dark Option) be with you: go out there and kill them all.
best, Peter
…
Ladybug + Honeybee:
(Follow steps 0-4 for basic functionality and 0-9 for full functionality)
0. If you have an old version of LB+HB, download the file here (https://app.box.com/s/ds96em9l6stxpcw8kgtf)
and open it in Grasshopper to remove your old Ladybug and Honeybee version.
1. Make sure that you have a working copy of both Rhino and Grasshopper installed.
2. Open Rhino and type "Grasshopper" into the command line (without quotations). Wait for grasshopper to load.
3. Install GHPython 0.6.0.3 by downloading the file at this link (http://www.food4rhino.com/project/ghpython?ufh) and
drag the .gha file onto the Grasshopper canvas.
4. Select and drag all of the userObject files (downloaded with this instructions file) onto your Grasshopper canvas.
You should see Ladybug and Honeybee appear as tabs on the grasshopper tool bar.
(If you are reading this instruction on github you can download them from http://www.food4rhino.com/project/ladybug-honeybee)
5. Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. For Honeybee, continue to the following:
6. Install Radiance to C:\Radiance by downloading it from this link (https://github.com/NREL/Radiance/releases/download/4.2.2/radiance-4.2.2-win32.exe) and running the exe.
7. Install Daysim 4.0 for Windows to C:\DAYSIM by downloading it at this link (http://daysim.ning.com/page/download) and running the exe.
8. Install EnergyPlus 8.1 to C:\EnergyPlusV8-1-0 by going to the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/energyplus_download.cfm), making an account, going to "download older
versions of EnergyPlus, selecting 8.1 and running the exe.
9. Copy falsecolor2.exe (http://pyrat.googlecode.com/files/falsecolor2.exe) and evalglare.exe (http://www.ise.fraunhofer.de/en/downloads-englisch/software/evalglare_windows.zip/at_download/file) to C:\Radiance\bin
10. You now have a fully-working version of Ladybug + Honeybee. Get started visualizing weather data with these video tutorials (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O).
After I've done all the above I followed this video
https://vimeo.com/96155674
And everything works well.
…
nted" in space (at instance definition creation phase): indicates the obvious fact that if garbage in > garbage out (try it).
2. Load the GH thing. Task for you: Using Named Views locate the points of interest as described further and make a suitable view. That way you can navigate rather easily around (hope dies last).
3. Your attractors are controlled from here:
The slider in blue picks some attractor to play with. You can use this while the K2 is running.
4. Don't change anything here (think of it as a black box: who cares how it works? nobody actually):
5. Enable the other "black box": job done your real-life stuff is placed:
6. Enable the solver: your "real-life" things start to bounce around:
7. Go there are play with the slider. A different attractor yields an other solution:
8. With real-life things in place if you disable the C# ... they are instantly deleted and you are back in lines/points and the likes:
9. Either with instance definitions or Lines/points change ... er ... hmm ... these "simple" parameters and discover the truth out there:
10. Since these are a "few" and they affect the simulation with a variety of ways ... we need a "self calibrating" system: some mini big Brother that does the job for us. Kinda like applying safely the brakes when it rains (I hate ABS mind).
NOTE: the rod with springs requires some additional code ,more (that deals with NESTED instance definitions) in order to (b) bounce as a whole and at the same time (b) elongates or shrinks a bit.
More soon.
…
lC_UtilEigenSystemSym (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilEigenSystemSym (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct3D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct3D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_FEASystem (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_FEASystem (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT1D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT1D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
EDIT: Even with COFF disabled in GrasshopperDeveloperSettings this still happens (Thanks Jon)
Is millipede not compatible with Rhino version 5? Or is there a different .dll to use?
Having loaded some of the components:
I congratulate you on following Rutten's 3rd law of Grasshopper :)
Although I hope the Solver and especially the Stress lines get further refinement in order to differentiate them as I find it hard to read the small label at the bottom. Maybe the Chimney's can have different numbers 3 = 3D, 2 = 2D etc.
…