But not just any gum tree. The angophora, no less:
Why? Because I like nature, that's why. Every time I see new designs –especially architectural designs– it worries me that the natural environment is being taken over. Not just that, but even the new materials used in all product designs has to come from nature as well [read: mines].
So. People are forgetting that we still need trees and I believe that if someone sees a beautiful [read: established] tree in their architectural plans, they are going to be much more likely to build around it and not cut it down. That alone would no doubt increase the value of the house.
My thinking is that current tree models suck. They look unnatural and I think I know why. They're not random or organic enough. They're not detailed enough. That's basically my 'rationale' for this project. Just look at how different all of these tree trunks are!
So I am not being paid for this project. It's a personal project of mine. I'm just worried about the trunk shape for now — I'll worry about all the leaves... when I get to that.
I am a grasshopper beginner. Please keep that in mind. I am also fairly hopeless at traditional programming, but I find the visual approach of grasshopper much easier to grasp. So unfortunately I have gotten stuck and need some help, even just a clue, as to how to proceed.
That said, here is my current progress:
About a year ago, I started modelling with straight trunks using pipe sections, to see if I could get a very basic "tree" shape. And to see if I could join the segments together. Yes it works but it looks hopeless as you can imagine. Then I stopped for a long while. Now I'm back at it, hoping to improve a lot more.
I have already made one basic vertical nurbs curve with tangents at either end as the main "trunk".
I tried creating two ellipses at each end of the main trunk/curve and lofting between them but it omitted the main curve/rail. So it ended up being an elliptical trunk with straight sides which of course still didn't look right.
Then I divided the first main curve up into a number of segments. I think that is a better approach.
I have taken the parameters of the curve at each segment (probably the tangent, but I am unsure what the exact parameter is) and used that to form a basic angled plane at each segment/division.
I have been able to draw ellipses at each segment and rotate them onto the plane.
I was going to loft it together later on. A Curved loft with elliptical cross-sections looks much better than straight a pipe does, but still looks too unnatural.
I quickly realised that tree trunks are not elliptical, but rather, shaped more like 'kidneys'.
The next step was to create >3 points on each of those planes (spaced fairly evenly around the ellipse so as not to create a really funky/unwanted shape).
Maybe it would be better to model with a triangle or other polygon instead of an ellipse. I haven't got that far yet... because here is where I am getting stuck.
I managed to find a way of getting three roughly 'triangular' points along each that ellipse.
I also managed to create three nurbs cuves in the Z direction which intersected those three points, a bit like three seams down the side of the tree trunk, but couldn't figure out how to loft it all together.
I think it was the wrong approach anyway... I'd rather try to create a bunch of nurbs curves at each of the XY planes so as to get more control of the shape.
What I am trying to do now is create three roughly triangular-spaced points on a basic ellipse through which I can then draw a simple nurbs curve (think like a cross section of the trunk).
I would then like to add some XY-only randomness to the positions of those points. Not Z randomness, otherwise the trunk is going to get messed/kinked up. That's probably very important.
Then I would like to loft those nurbs curvs at each XY plane together forming the basic tree trunk, which also tapers based on some other variable (a non-linear factor, not simply distance from ground plane, perhaps something else?).
I have attached the GH file.
I am also open to suggestions if you have a better way of solving a problem. I would like to retain control over a lot of factor such as number of branches, spacing, average branch length, etc. My main contrsaints are that the entire thing has to be somewhat random and non-linear.
…
t. So here we go!
1. Honeybee is brown and not yellow [stupid!]...
As you probably remember Honeybee logo was initially yellow because of my ignorance about Honeybees. With the help of our Honeybee expert, Michalina, now the color is corrected. I promised her to update everyone about this. Below are photos of her working on the honeybee logo and the results of her study.
If you think I'm exaggerating by calling her a honeybee expert you better watch this video:
Thank you Michalina for the great work! :). I corrected the colors. No yellow anymore. The only yellow arrows represent sun rays and not the honeybee!
2. Yellow or brown, W[here]TH Honeybee is?
I know. It has been a long time after I posted the initial video and it is not fun at all to wait for a long time. Here is the good news. If you are following the Facebook page you probably now that the Daylighting components are almost ready.
Couple of friends from Grasshopper community and RADIANCE community has been helping me with testing/debugging the components. I still think/hope to release the daylighting components at some point in January before Ladybug gets one year old.
There have been multiple changes. I finally feel that the current version of Honeybee is simple enough for non-expert users to start running initial studies and flexible enough for advanced users to run advanced studies. I will post a video soon and walk you through different components.
I think I still need more time to modify the energy simulation components so they are not going to be part of the next release. Unfortunately, there are so many ways to set up and run a wrong energy simulation and I really don’t want to add one new GIGO app to the world of simulation. We already have enough of that. Moreover I’m still not quite happy with the workflow. Please bear with me for few more months and then we can all celebrate!
I recently tested the idea of connecting Grasshopper to OpenStudio by using OpenStudio API successfully. If nothing else, I really want to release the EnergyPlus components so I can concentrate on Grasshopper > OpenStudio development which I personally think is the best approach.
3. What about wind analysis?
I have been asked multiple times that if Ladybug will have a component for wind study. The short answer is YES! I have been working with EFRI-PULSE project during the last year to develop a free and open source web-based CFD simulation platform for outdoor analysis.
We had a very good progress so far and our rockstar Stefan recently presented the results of the work at the American Physical Society’s 66th annual DFD meeting and the results looks pretty convincing in comparison to measured data. Here is an image from the presentation. All the credits go to Stefan Gracik and EFRI-PULSE project.
The project will go live at some point next year and after that I will release the Butterfly which will let you prepare the model for the CFD simulation and send it to EFRI-PULSE project. I haven’t tried to run the simulations locally yet but I’m considering that as a further development. Here is how the component and the logo looks like right now.
4. Teaching resources
It has been almost 11 months from the first public release of Ladybug. I know that I didn't do a good job in providing enough tutorials/teaching materials and I know that I won’t be able to put something comprehensive together soon.
Fortunately, ladybug has been flying in multiple schools during the last year. Several design, engineering and consultant firms are using it and it has been thought in several workshops. As I checked with multiple of you, almost everyone told me that they will be happy to share their teaching materials; hence I started the teaching resources page. Please share your materials on the page. They can be in any format and any language. Thanks in advance!
I hope you enjoyed/are enjoying/will enjoy the longest night of the year. Happy Yalda!
Cheers,
-Mostapha
…
3. receiver gets data from sender via input (0) < the data here may be changed in the meantime, for instance if its a double then I would like to add 1 to it.
4. receiver sends data to sender's input(2)
5. go to 1.
VS 2013 studio project folder
SENDER
Public Class loopStart Inherits GH_Component
Dim cnt As Integer
Friend Property counter() As Integer Get Return cnt End Get Set(value As Integer) cnt = value End Set End Property
Dim iData As New GH_Structure(Of IGH_Goo)
Friend Property startData() As GH_Structure(Of IGH_Goo) Get Return iData End Get Set(value As GH_Structure(Of IGH_Goo)) iData = value End Set End Property
Public Sub New() MyBase.New("loopStart", "loopStart", "Start the loop with this one.", "Extra", "Extra") End Sub
Public Overrides ReadOnly Property ComponentGuid() As System.Guid Get Return New Guid("bdf1b60d-6757-422b-9d2d-08257996a88c") End Get End Property
Protected Overrides Sub RegisterInputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager) pManager.AddGenericParameter("Data", "dIn", "Data to loop", GH_ParamAccess.tree) pManager.AddIntegerParameter("Steps", "S", "Number of loops", GH_ParamAccess.item) pManager.AddGenericParameter("<X>", "<X>", "Please leave this one alone, don't input anything.", GH_ParamAccess.tree) pManager.Param(2).Optional = True End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager) pManager.AddGenericParameter("Data", "dOut", "Data to loop", GH_ParamAccess.tree) End Sub
Public Overrides Sub CreateAttributes() m_attributes = New loopStartAttributes(Me) End Sub
Protected Overrides Sub SolveInstance(ByVal DA As Grasshopper.Kernel.IGH_DataAccess)
Dim numLoop As Integer DA.GetData(1, numLoop)
Dim loopDt As New Grasshopper.Kernel.Data.GH_Structure(Of IGH_Goo)
If cnt = 0 Then Me.startData.Clear() DA.GetDataTree(0, Me.startData) loopDt = startData.Duplicate DA.SetDataTree(0, loopDt) End If
If cnt < numLoop - 1 And cnt > 0 Then DA.GetDataTree(2, loopDt) DA.SetDataTree(0, loopDt) Me.ExpireSolution(True) Else DA.GetDataTree(2, loopDt) DA.SetDataTree(0, loopDt) End If
cnt += 1
End Sub
End Class
RECEIVER
Public Class loopEnd Inherits GH_Component
Dim aData As New GH_Structure(Of IGH_Goo)
Friend Property anyData() As GH_Structure(Of IGH_Goo) Get Return aData End Get Set(value As GH_Structure(Of IGH_Goo)) aData = value End Set End Property
Public Sub New() MyBase.New("loopEnd", "loopEnd", "End the loop with this one.", "Extra", "Extra") End Sub
Public Overrides ReadOnly Property ComponentGuid() As System.Guid Get Return New Guid("3ffa3b66-8160-4ab3-87c9-356b2c17aadd") End Get End Property
Protected Overrides Sub RegisterInputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager) pManager.AddGenericParameter("Data", "dIn", "Data to loop", GH_ParamAccess.tree) End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager) pManager.AddGenericParameter("Data", "dOut", "Data after the loop", GH_ParamAccess.tree) End Sub
Protected Overrides Sub SolveInstance(ByVal DA As Grasshopper.Kernel.IGH_DataAccess) Me.aData.Clear() DA.GetDataTree(0, Me.aData) runner()
DA.SetDataTree(0, Me.aData) End Sub
Sub runner()
Dim doc As GH_document = Grasshopper.Instances.ActiveCanvas.Document Dim docl As list(Of iGH_DocumentObject) = (doc.Objects)
For i As Integer = 0 To docl.count - 1 Step 1 Dim comp As Object = docl(i) If comp.NickName = "loopStart" Then Dim compp As IGH_Param = comp.Params.input(2) compp.VolatileData.Clear() compp.AddVolatileDataTree(anyData) Exit For End If Next End Sub
End Class
…
option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock"). Then paste them in File->Special Folders->User Object Folder. You can download the example files from here. They act in similar way, Ladybug Photovoltaics components do: we pick a surface, and get an answer to a question: "How much thermal energy, for a certain number of persons can my roof, building facade... generate if I would populate them with Solar Water Heating collectors"? This information can then be used to cover domestic hot water, space heating or space cooling loads:
Components enable setting specific details of the system, or using simplified ones. They cover analysis of domestic hot water load, final performance of the SWH system, its embodied energy, energy value, consumption, emissions... And finding optimal system and storage size. By Dr. Chengchu Yan and Djordje Spasic, with invaluable support of Dr. Willian Beckman, Dr. Jason M. Keith, Jeff Maguire, Nicolas DiOrio, Niraj Palsule, Sargon George Ishaya and Craig Christensen. Hope you will enjoy using the components! References: 1) Calculation of delivered energy: Solar Engineering of Thermal Processes, John Wiley and Sons, J. Duffie, W. Beckman, 4th ed., 2013. Technical Manual for the SAM Solar Water Heating Model, NREL, N. DiOrio, C. Christensen, J. Burch, A. Dobos, 2014. A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015
2) Domestic hot water load: Modeling patterns of hot water use in households, Ernest Orlando Lawrence Berkeley National Laboratory; Lutz, Liu, McMahon, Dunham, Shown, McGrue; Nov 1996. ASHRAE 2003 Applications Handbook (SI), Chapter 49, Service water heating
3) Mains water temperature Residential alternative calculation method reference manual, California energy commission, June 2013. Development of an Energy Savings Benchmark for All Residential End-Uses, NREL, August 2004. Solar water heating project analysis chapter, Minister of Natural Resources Canada, 2004.
4) Pipe diameters and pump power: Planning & Installing Solar Thermal Systems, Earthscan, 2nd edition
5) Sun postion and POA irradiance, the same as for Ladybug Photovoltaics (Michalsky (1988), diffuse irradiance by Perez (1990), ground reflected irradiance by Liu, Jordan (1963))
6) Optimal system and storage tank size: A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015.…
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
then passed to the file3dm.Write() Method when it's used? Turns out it will work in the Visual Studio IDE perfectly well like this, Now I'm just sorting out the best way to create a surface.
If I can ask one more question, what does file.Polish() do?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using Rhino.Geometry;
using Rhino.FileIO;
using Rhino.Collections;
using Rhino;
namespace NurbsExample
{
class Program
{
static void Main(string[] args)
{
string output = "C:/WorkingFileExample.3dm";
RunScript(output);
}
private static void RunScript(string path)
{
File3dm file = new File3dm();
file.Polish();
for (int j = 0; j<=10; j++)
{
file.Objects.AddLine(new Line(j, 0, 5 - j, 5 + j, 0, j));
}
File3dmWriteOptions options = new File3dmWriteOptions();
options.SaveAnalysisMeshes = false;
options.SaveRenderMeshes = false;
options.SaveUserData = true;
file.Write(path, options);
}
}
}…
Added by Henry Jarvis at 6:33am on October 7, 2015
peuvent se diviser une surface avec ne importe quel motif imaginable. 3. Ici, je fournir un moyen de le faire via Lunchbox ... cela fonctionne mais il est fixe et donc nous avons besoin de jouer avec des arbres de données afin de créer le motif approprié par cas. 4. L'autre composante est un joint C # qui fait beaucoup de choses autres que de diviser ne importe quelle collection de points avec de nombreux modèles (voir le modèle ANDRE que je ai fait pour vous). 5. Vous devez décomposer une polysurface en morceaux afin de travailler sur les subdivisions. 6. Je donne une autre définition ainsi que pourrait agir comme un tutoriel sur la façon de traiter des ensembles de points via des composants de GH standards et des méthodes classiques.
Avertissez si tous ceux-ci apparaissent floue pour vous: Si oui, je pourrais écrire une définition utilisant des composants de GH classiques - mais vous perdrez les variations de motifs de division.
mieux, Peter
…
ing the maps to the broader community.
At the moment, there are just a few known issues left that I have to fix for complex geometric cases but they should run smoothly for most energy models that you generate with Honeybee. Within the next month, I will be clearing up these last issues and, by the end of the month, there will be an updated youtube tutorial playlist on the comfort tools and how to use them.
In the meantime, there's an updated example file (http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map) and I wanted to get you all excited with some images and animations coming out of the design part of my thesis. I also wanted to post some documentation of all of the previous research that has made these climate maps possible and give out some much deserved thanks. To begin, this image gives you a sense of how the thermal maps are made by integrating several streams of data for EnergyPlus:
(https://drive.google.com/file/d/0Bz2PwDvkjovJaTMtWDRHMExvLUk/view?usp=sharing)
To get you excited, this youtube playlist has a whole bunch of time-lapse thermal animations that a lot of you should enjoy:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A
To give a brief summary of what you are looking at in the playlist, there are two proposed designs for completely passive co-habitation spaces in New York and Los Angeles.
These diagrams explain the Los Angeles design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJM0JkM0tLZ1kxUmc/view?usp=sharing)
And this video gives you and idea of how it thermally performs:
These diagrams explain the New York design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJS1BZVVZiTWF4MXM/view?usp=sharing)
And this video shows you the thermal performance:
Now to credit all of the awesome people that have made the creation of these thermal maps possible:
1) As any HB user knows, the open source engines and libraries under the hood of HB are EnergyPlus and OpenStudio and the incredible thermal richness of these maps would not have been possible without these DoE teams creating such a robust modeler so a big credit is definitely due to them.
2) Many of the initial ideas for these thermal maps come from an MIT Masters thesis that was completed a few years ago by Amanda Webb called "cMap". Even though these cMaps were only taking into account surface temperature from E+, it was the viewing of her radiant temperature maps that initially touched-off the series of events that led to my thesis so a great credit is due to her. You can find her thesis here (http://dspace.mit.edu/handle/1721.1/72870).
3) Since the thesis of A. Webb, there were two key developments that made the high resolution of the current maps believable as a good approximation of the actual thermal environment of a building. The first is a PhD thesis by Alejandra Menchaca (also conducted here at MIT) that developed a computationally fast way of estimating sub-zone air temperature stratification. The method, which works simply by weighing the heat gain in a room against the incoming airflow was validated by many CFD simulations over the course of Alejandra's thesis. You can find here final thesis document here (http://dspace.mit.edu/handle/1721.1/74907).
4) The other main development since the A. Webb thesis that made the radiant map much more accurate is a fast means of estimating the radiant temperature increase felt by an occupant sitting in the sun. This method was developed by some awesome scientists at the UC Berkeley Center for the Built Environment (CBE) Including Tyler Hoyt, who has been particularly helpful to me by supporting the CBE's Github page. The original paper on this fast means of estimating the solar temperature delta can be found here (http://escholarship.org/uc/item/89m1h2dg) although they should have an official publication in a journal soon.
5) The ASHRAE comfort models under the hood of LB+HB all are derived from the javascript of the CBE comfort tool (http://smap.cbe.berkeley.edu/comforttool). A huge chunk of credit definitely goes to this group and I encourage any other researchers who are getting deep into comfort to check the code resources on their github page (https://github.com/CenterForTheBuiltEnvironment/comfort_tool).
6) And, last but not least, a huge share of credit is due to Mostapha and all members of the LB+HB community. It is because of resources and help that Mostapha initially gave me that I learned how to code in the first place and the knowledge of a community that would use the things that I developed was, by fa,r the biggest motivation throughout this thesis and all of my LB efforts.
Thank you all and stay awesome,
-Chris…