de modelación en 3D y aprovechen las ventajas que plantean, como mejorar su proceso de diseño y explorar múltiples alternativas para un proyecto en lapsos de tiempo muy reducidos en comparación de los métodos tradicionales.
En consecuencia, los alumnos tendrán la posibilidad de disminuir sus tiempos de trabajo, con resultados iguales o incluso mejores a los que obtenían con anterioridad; mejorar la calidad de sus presentaciones y, lo que es más importante, ampliar la fundamentación de sus proyectos en el aspecto funcional y formal, dependiendo de las características del proyecto.
Para lograr estos objetivos, se contemplan dos temarios y un ejercicio práctico.
Al finalizar el curso, los asistentes serán capaces de manejar Rhinoceros y Grasshopper en un nivel medio, con el objetivo que el alumno pueda continuar aprendiendo con alguno de nuestros siguientes workshops o de manera autodidacta.
Además del contenido teórico se incluye un ejercicio práctico, la magnitud del ejercicio y el material que se le destine se definirán con base en el número de asistentes.
El workshop tiene una duración de cinco sesiones:
Sesión 1 – Temario de Rhinoceros
Sesión 2 y 3 – Temario de Grasshopper
Sesión 4 y 5 – Ejercicio práctico
El horario es de 9 am a 4 pm, con una hora de receso para tomar un refrigerio.
No es necesario traer el equipo necesario para trabajar, se cuenta con un equipo para cada persona asi como el material de trabajo para el ejercicio práctico, por lo cual se les recomienda que no traigan portátiles u otro material, únicamente dispositivos de almacenamiento si desean guardar sus trabajos.
El costo del evento es de $3,500 estudiantes y $4,000 profesionales.
(Para poder tener el descuento de estudiante es necesaria una constancia de la universidad de la que proviene, acreditando que el interesado está cursando algún semestre de la carrera. Personas graduadas que estén cursando una maestría o algún grado superior no reciben el descuento).
Para apartar su lugar pueden realizar un depósito de $1,500 y terminar de efectuar el pago antes del 15 de abril si es mediante un depósito bancario o el primer día del evento en efectivo.
El evento se realizará en las oficinas de Vegasot, ubicadas en Circuito Cirujanos No. 23-A
Cd. Satélite, Naucalpan, Edo. de México 53100
http://www.vegasoft.com.mx
Para cualquier duda por favor escriban un correo a luzytextura@gmail.com, por teléfono al 044 55 4381 3302, o en facebook.com/archbernardorivera…
h tubes are redundant so surfaces overlap instead of interpenetrate, so it is not a good system.
Cocoon is the best answer these days unless you can get Exowire/Exoskelton to work. If you want more control over shape, feed your uncapped tubes into Cocoon as meta-surfaces and delete any and all of the inner meshes to just keep the outer single closed one, but this is just duplicate-culled lines used as meta-lines:
Turn down the CS input to 0.005 for this result, from 0.02 used for faster preview. In fact bake the lines and only test Cocoon on a few of them in order to get the result you want before doing the whole thing.
Whole thing at 0.005 cell size takes 5 minutes for Cocoon and 2 minutes for refinement to a smooth and even mesh.
Actually, seems like 0.005 is way too fine, giving a 600MB STL file.
So, 0.01 cell size at less than a minute total:
159MB STL which is still a bit too big for places like Shapeways. Wow. OK then 0.02 cell size, but I have to increase diameter or my two smoothing steps in refine collapse things too much, an in fact I set it to no smoothing, getting more volume and a reasonable 46MB STL file:
Alas, now it's more frail and overly organic rather than mechanical. Increasing diameter just merges it into perforated plates too much. File size is simply an issue with this complexity level, so different 3D printing services will have different file size limits.
Exowire/Exoskeleton would work but your original mesh hasn't been MeshMachine remeshed to be regular, so short segments ruin it. Here is just a corner:
I think that's why more wires fails, at least. Pretty temperamental component.
Switching to MeshMachine is needed, I guess, instead of Cocoon refine, to remesh away so many small triangles along the boring tubes. Crucial for good remeshing was to set Flip to 0 or I failed to get a rough enough mesh.
It's an adaptive mesh so I can retain good detail while roughing out the tubes.
MeshMachine is terribly slow for this whole thing, like 6 minutes, and blows up for this overly rough setting, 20 steps, so less rough, ugh, I'm out of time. I think free Autocad Meshmixer is the way to make a better smaller mesh, after a refined output from Cocoon. MeshMachine is just too slow to tweak and when it blows up, creating massive triangles jutting out, it hangs too when you change settings.
Starting with a Cocoon refined mesh certainly helped Meshmixer. Using triangle budget lets me have full control. Here is 150K triangles instead of 200K:
STL file size down to 40MB. I think Shapeways is 70 or 100MB limit? So it can be even finer. Here is the Cocoon output versus the Meshmixer reduction:
To use Meshmixer, turn on View > Show Wireframe, Command-S to select all and use Edit > Reduce from the palette that appears.
Cocoon can end up making a few inner meshes where things get weird in your uneven original mesh with small holes so fish out the main mesh by adding a List Item node.
The best strategy for Cocoon is indeed to make an overly fine STL so you avoid any need to tweak forever in Grasshopper, but then you can achieve a smaller mesh file size while preserving shape instead of things turning all smearly organic in Grasshopper.…
o está dirigido a estudiantes de arquitectura y diseño de interiores, recién titulados y profesionales interesados en el software o que necesiten conocer las herramientas básicas de las que dispone el programa en los diferentes ámbitos y cómo enfocarlas a arquitectura.
Descripción:El contenido del curso enseñará a utilizar el programa de diseño Rhinoceros 3D aplicando su metodología de trabajo en el campo de la arquitectura, básandose además de la creación de pequeños elementos paramétricos para controlar el diseño y acabar renderizando las geometrías 3d con V-Ray para Rhino.
El curso consta de 3 módulos de 12h de duración cada uno (que pueden realizarse juntos o por separado) en los cuales se profundizará en herramientas de Rhino, Grasshopper y V-Ray a medida que se realizan casos prácticos sobre proyectos arquitectónicos.Se pretende establecer un sistema de trabajo eficiente desde el inicio del modelado hasta la posterior creación de imágenes para documentación del proyecto.
Módulo Rhinoceros Arquitectura:• Conceptos básicos e interfaz de usuario Rhino• Introducción al sistema cartesiano en Rhino• Clases de complejidad de geometría• Importación/exportación de archivos compatibles• Topología NURBS• Trabajo con Sólidos• Estrategias básicas de Superficies• Introducción a Superficies Avanzadas
Módulo Grasshopper:• Conceptos básicos e interfaz de usuario Grasshopper• Introducción a parámetros base y componentes• Matemáticas y trigonometría como herramientas de diseño• Matemáticas aplicadas a creación de Geometría• Introducción a listas simples• Análisis de Superficies y Curvas• Dominios de Superficies y Curvas• Panelado de superficies• Manejo de listas y componentes relacionados• Modificación de panelados en función de atractores• Exportación/Importación de información a Grasshopper
Módulo V-Ray para Rhinoceros:• Conceptos básicos e interfaz de usuario V-Ray• Vistas guardadas• Materiales V-Ray• Materiales, creación y edición• Iluminación (Global Illumination, Sunlight, Lights)• Cámara Física vs Cámara default• Canales de Render• Postprocesado básico de canales
Detalles:Instructores: Alba Armengol Gasull y Oriol Carrasco (SMD Arquitectes)Idioma: CastellanoHorario: 22 JULIO al 26 JULIO 2013 // 10.00 – 14.00 / 16.00 – 20.00Organizadores: SMDLugar: SMD lab, c/Lepant 242 Local 11, 08013 Barcelona (map)
Software:Rhinoceros 5Grasshopper 0.9.00.56V-Ray 1.5 for RhinoAdobe Photoshop CS5Links de versiones de evaluación de los Softwares serán facilitadas a todos los asistentes. Se usará unica y exclusivamente la versión de Rhino para PC. Se ruega a los participantes traer su propio ordenador portátil.
Registro:Modalidad de precio reducido por tres módulos 275€Posibilidad de realizar módulos por separado 99€…
ut it locking up again.
I'm told we have to wait for Grasshopper 2 wed to Rhino 6, in months or years from now since Grasshopper isn't multithreaded. It does look for the escape key but not reliably at all.
Here is a response from the developer to my same sort of question:
http://www.grasshopper3d.com/forum/topics/emergency-top-for-solutio...
David Rutten: "if it was doable, I'd do it, but Grasshopper runs on the main UI thread which means that no key presses come through until the process is done. Right now I check for escape key state (circumventing the key-press events) at certain points during the solution, but the more I check the more I slow down the solution, and there are large areas where I can't check because it's not my code that is taking up all the processor power in the UI thread."
I solved my own problem in that case by leaving the solver disabled in the menu and then invoking it manually as a recompute menu command that works once anyway. That won't help you with a rogue script though, but will let you set things up without Grasshopper recalculating each change.
With the solver disabled, when you have to manually invoke a recompute, that necessary action can help remind you to save first.
I tried assigning the Rhino command GrasshopperUnloadPlugin to F4 in Rhino settings but in the test case of populating a box with 1000000 random points (Vector > Populate 3D), the freeze up cannot be ignored as you access Rhino, which remains grayed out as a program even when you highlight its window, and nor can you get any Grasshopper command-S in while its running forever. That's only the equivalent of 100X100X100 points yet it still locks up Rhino so long. Thinking in this very simple case clarifies things, since it it won't let go then complex scripts may have some better chance but really the problem is in the system itself.
At least the Rhino close box works, so you don't need the Windows Task Manager :-).
There are also autosave options in Grasshopper preferences that creates an autorecovery file for the next time you open the same document.…
ystem to support it from the back.
ELEVATIONPLAN
What I need to do is create a mesh network that is composed of straight segmented pieces. To start, I contoured the surface at 500mm segments in the X and Y axis, getting a mesh grid [below]
Then, I wrote a simple grasshopper script to segment the contour lines, but when I run it, the segments in the X direction and the Y direction do not intersect like I need them to.
I understand why this happened and I understand what I need to do (in concept) but I can't seem to figure out how to implement it.
I'm pretty sure that I need to take the original contours and find the intersecting points and include it in my set of points from DivLength command. My problem is that in the list, the numbers get all jostled up and when I Pline the list of points, it goes a bit crazy. My questions are:
1. Is this the best method of going about this process of creating the segmented mesh?
2. How do I reassemble the list of the two point groups I added?
Thanks in advance!
Best,
Issac
…
learn, or as an alternative to your morning coffee + cross-word puzzle.
Rules:
Contributions can be posted by anyone. Either selected from a previously posted problem from the general discussion (please acknowledge original poster), a selection from one of the many grasshopper+ primers (please include credits) something you think is fun, curious about, or even something you want to learn.
We should keep the entries dated so we can track them. One new problem per day (so if you see one posted for today- there is always tomorrow).
User(you) adds post titled: date-name of problem.
Solutions will be posted with breakdowns, either in logic procedure, etc. And in the spirit of the NY Times, an explained solution will be posted as well within the following days.
Remember there are multiple ways to solve a problem- however the “official” post should include a “clean and elegant” (or simplest) solution. So that all learning can develop better scripting habits.
Rules: an explanation.
1- Submission categories are as follows:
Native
Plug In
Scripted
Each category should have a difficulty rating - 1 to 5 perhaps.
They should be included in title for clarity-
Date_NameOfProblem_Native Plugin or Script_Difficulty
2. Since we are an international community, and this is an open group- a C+G day starts at the time of 10 am local poster’s time.
3.Anyone can set the next question. However the same person cannot set two days in a row. If a question is up- then next person needs to wait until the following day to post. You can PM Danny Boyes or Myself (Monique) if you are having posting issues- (i.e.: how to post, or have been trying to post, but keep missing the opportunity)
4. Answers are presented in the typical grasshopper community response way: in the form of examples, and/or screen shots. For screen shots: make sure the nodes are legible, if you do a function inside a node make sure we can see what you did. Verbal explanation. Maybe picture of result.
The difference between this group and the general discussion is that the poster should know how to solve the problem, be able to post a solution up themselves.
5. The poster judges the answer. They should offer a sample solution as well when they declare the winner.
However overall quality control may be checked by moderators of the group.
6. Still thinking about this one. …
ween the extremes of each goal.
Also see octopus.E for custom evolutionary algorithms.
Download the latest version on food4rhino
It is part of a range of tools developed at the University of Applied Arts Vienna, and Bollinger+Grohmann Engineers.
search for single goal + diversity of solutions
search for best trade offs between 2 to X goals
improve solutions by similarity-goals
choose preferred solutions during a search
change objectives during a search
solutions' 3d models for visual feedback
recorded history
save all search data within the Grasshopper document
save a solution as a Grasshopper State
export to text or text files
Octopus introduces multiple fitness values to the optimization. The best trade-offs between those objectives are searched, producing a set of possible optimum solutions that ideally reach from one extreme trade-off to the other.
Based on SPEA-2 and HypE from ETH Zürich and David Rutten's Galapagos User Interface. Developed by Robert Vierlinger in cooperation with Christoph Zimmel, karamba3d.com and Bollinger+Grohmann Engineers.
To install:
Copy the .gha and .dll file into the Grasshopper components folder
Right-click the file > Properties > make sure there is no "blocked" text
Restart Rhino and Grasshopper
Some examples are provided here.
New commented examples and a brief manual are provided in the download of octopus on food4rhino.
…
Added by Robert Vier at 2:51am on December 6, 2012
mbre de 9:00 am a 8:00 pm Este taller está dirigido principalmente a arquitectos y diseñadores interesados en el aprendizaje del diseño paramétrico y generativo aplicados a la generación y racionalización de geometrías complejas para su implementación en diferentes procesos de diseño. En el curso se abordarán los conceptos básicos y metodología para hacer frente a diversas problemáticas del diseño mediante el desarrollo de herramientas algorítmicas a través de un lenguaje de programación visual y el desarrollo de esquemas de fabricación digital. No se requieren conocimientos previos de Rhinoceros 3D ni de programación, conocimientos previos de CAD deseables. Estudiantes: 2,500 MXN Profesionales: 3,000 MXN
CONCURSO DE RENDERS - BECA DEL 100% - Parametric & Generative Architecture & Design Grasshopper Workshop.
- Publica tu render en www.facebook.com/3dmetrica - El render con más likes será el ganador. - Fecha límite de votaciones 15 de septiembre del 2012.
Informes e Inscripciones: workshop@3dmetrica.com 04455 28790084 www.3dmetrica.com www.facebook.com/3dmetrica
…
to run at full screen. I've gone as far as using an iPad to use as the second monitor via AirDisplay (which actually works really well) but have never been satisfied with any setup that required you to look back and forth as if at a tennis match all day long.
Not long after first using Grasshopper 3+ years ago I've had the desire for a "Live Viewport" component that would allow a live image of the 3d geometry being generated directly in the canvas. Every once in a while I search the forums with the hope of finding a solution, but always come up empty handed. Someday this might exist although for now I have found what might be the next best thing to a native "Live Viewport" component and its enabled with a small app named Sticky Previews. This app uses the task bar preview feature within Windows 7's aero interface to create custom, floating preview windows from any open window currently running. I've only just discovered the app, but it seems to do the trick and has been stable and problem free so far. -- I will post an update if I find out that I might have spoken too soon. The install allows for a 30 day trial and is $15 bucks to purchase. I just found the app and don't know anything about this group that created the app. If you happen to know of them, Id be curious to find out more.
divided windows, cramped and slow;
unified window with floating rhino model preview;
link to the apps webpage;
http://www.ntwind.com/software/sticky-previews.html
Also works with other apps;
and the about me page screen shot;
…
Added by Tyler Selby at 11:25pm on November 26, 2012