- nickname is rather the best approach - and not on active group, but that's irrelevant anyway).
Step back (assuming that you are talking about the "Tens_from_random_blah_blah" definition):
1. Engineering is the art of demystifying (or we are promising that anyway, he he). This means that you start defining (better: outlining) some topology for things based on some "generic" rules (like the ones applied for the masts,cables,cones etc etc). These things are kept in some kind of structure (Lists, DataTrees etc). Things are few in 99.99999% of cases (i.e. : even the biggest membrane "module" has, say, 20-50 masts per "module").
2. Then ... handling things "individually" (mostly modifying) becomes the most critical part. See this (an x "possible" solution by combining a myriad of "options" : a no cones membrane solution, in plain English):
3. But the above is impossible (for more than obvious reasons). You should deploy masts in some high/low sequence in order to achieve some meaningful convex/concave formation that could work.
4. This "works" : 5. This doesn't:
6. This works partially (the formation at the back is "flat" == undo able):
7. This is utterly kitsch (and faulty as the case6 - the back portion):
So it's quite obvious that without a (quite complex) capability to individually control things (in this occasion : mast heights) the whole definition is a waste of computer time. Additionally the more the solution is "demystified" (some curve is defined, some random points are created, some masts are in place, some cables appear etc etc) the more additional constrains are required in order to "narrow" the possibilities (In plain English : sliders should control other sliders as regards their min/max values, true/false, you/me etc etc).
Remember that we are talking about ONE (mast height) out of a myriad things that you should control "manually" (it's utterly pointless to mastermind some kind of "generic" rules - or use naive attractors etc etc) .You'll see the difference when I'll completely reform the definition by adding individual control upon anything.
PS: what about the blocks? (the real life stuff that actually make any solution possible). Can you imagine a 2nd set of "restrictions" imposed by "a child to his parent"? (Assembly/Component modeling , that is).
more soon
…
uick answers. Below you will find some suggestions, but don't think of them as rules and especially don't think of them as guarantees.
1. Choose a descriptive title for your post
Don't call your question "Help!" or "I have a problem" or "Deadline tonight!", but actually describe the problem you are having.
2. Be succinct but clear in your wording
People need to know some details about your problem in order to understand what sort of answers would satisfy you, but nobody cares about how angry your boss or how bad your teacher or how tight your deadline is. Talk about the problem and only the problem. If you don't speak English well, you should probably post in your native language as well as providing a Google Translation of your question.
3. Attach minimal versions of all the relevant files
If you have a GH/GHX file you have a question about, attach it to the post. Don't expect that people will recreate a file based on a screen-shot because that's a lot of pointless work. It's also a good idea to remove everything non-essential from a GH file. You can use the 'Internalise Data' menu option to cut everything to the left of a parameter:
If you're importing curves or Breps or meshes from Rhino, you can also internalise them so you won't have to post a 3DM file as well as a GH file. If you do attach large files, consider zipping them first. Do not use RAR, Ning doesn't handle it.
It is especially a good idea to post files that don't require any non-standard components if at all possible. Not everyone has Kangaroo or Hoopsnake or Geco installed so if your file relies on those components, it might not open correctly elsewhere.
4. Include a detailed image of the GH file if it makes sense
If your question is about a specific (group of) components, consider adding a screenshot of the file in the text of the post. You can use the Ctrl+Shift+Q feature in Grasshopper to quickly create nice screenshots with focus rectangles such as this:
5. Include links to online resources if possible
If you have a question about Schwarz Minimal surfaces, please link to a website which talks about these.
6. Create new topics rather than continuing old ones
It's usually better to start a fresh question, even if there's already a discussion that kinda sorta tangentially touches upon the same issue. Please link to that discussion, but start anew.
7. This is not a 'do my work for me' group
Many of us like to help, but it's good to see effort on our part being matched by effort on your part. Questions in the form of 'I need to do X but cannot be bothered to try and learn the software' will (and should) go unanswered.
7b. Similarly, questions in the form of 'How do I quickly recreate this facade that took a team of skilled professionals four months to figure out?' have a very low success rate.
--
David Rutten
Lead Grasshopper Development
Robert McNeel & Associates…
Added by David Rutten at 12:58pm on October 1, 2013
g-in, brief theory of complex systems, introduction to multi-agent systems and non-linear design, flocking, Boid library, basic examples - brownian motion, adhesion, separation, alignment, geometry following.-----------------------TIME: first session10am – GMT, London11am – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw9pm - Sidney7pm – Tokyo6pm – Beijing, Shanghai, Shenzhen, Hong Kong, Taipei3:30pm – Mumbai3pm – Karachi2pm - Samara1pm – Baghdad, Moscow, St Petersburg12pm – Istanbul, Athens, Helsinki, Cairo, JohannesburgTIME: second session3pm – GMT, London4pm – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw7pm – Dubai, Abu Dhabi, Baku6:30pm – Tehran6pm – Baghdad, Moscow, St Petersburg5pm – Istanbul, Athens, Helsinki, Cairo, Johannesburg1pm – Rio de Janeiro, São Paulo, Montevideo12pm – Buenos Aires, Santiago10am – Toronto, New York City, Bogota, Lima9am – Mexico City7am – Los AngelesWEBINARSThe rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. The webinars are divided into four groups: Essential, Advanced, Iterative and Architectural. If you are a Rhinoceros 3D or Grasshopper® newcomer, you are advised to take all the Essential sessions before proceeding to the next level. If none of the proposed topics suit your needs or if you require special treatment, you can request a custom-tailored 1on1 session. All sessions are held entirely in English.The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials.…
Added by Jan Pernecky at 3:36pm on February 17, 2015
er from moltiple curves the represent the area of floor plans,
but the problem is, I cant fine a way to intelligently divide the curves - responsively to the radiation analysis color (for example - that yelow area on of the building will have more division on each floor plan)
do you have any ideas on how to do that?
i tried to use attractors be failed miserably..
THANKS,
Limor.…
write a definition that represents the following surface that I have created out of paper.
This is essentially a squared surface subdivided into triangular segments. For that reason I was hoping I could use Zubin's example about triangles in chapter 3 of his book.
I'm sure, you guys know these kind of folding technique, but to clarify the pattern of the surface, here's a quick diagram:
My approach was to use the point cloud out of Zubani's example and select points with the Cull Nth component according to the pattern shown in the diagram. These points I would then offset with a z-vector component while keeping the distance between the points fixed.
However, after spending now several days trying to figure this out, I definitely ran into a wall..
As I see it, the example generates multiple points for the same coordinates, meaning there are occasions where there 6 points on top of each other.
Further, the Cull Nth component doesn't work exactly as I've hoped, the problem lies in the transition from one row to another..
I was also thinking instead of creating a series of points and then trying to filter specific points out to create (a) the surfaces and (b) the offset, maybe I should start creating these separate lists from the beginning?
Or, instead of point cloud series, using a surface and the sDivide component?
As you see, I am pretty confused/lost in the problem... any help would be greatly appreciated!
Thanks!
…
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
mething? I think it would be very useful to have a mapping of light intensity over the field of view of the used camera, and possibly and option to overlay it on the luminance mapping. It would in a very visual way provide information about contrast and glare.
Doesn't the falsecolor option already do that for luminance mappings? If not can you post an image/screenshot of such a mapping from Dialux/AGI32 or any other software.
4. It's just a shoebox type simulation. 11x11 luminaires pointing down to simple materials. The default elapsed time was 3m40s. I have found the _RadParameters component meanwhile, and got it down to 0m30s. I have noticed that the simulation doesn't tax multiple cpu threads completely, most of the time cpu is at 25% during execution.
The under-utlization of CPUs is a known issue with Radiance (the calculation engine) on Windows based systems. Unfortunately there isn't much that can be done about it at the moment.
5. Is it possible to map different degrees of translucency, diffuse color, absorptance, reflectance, etc..., by means of a bitmap image, expression, or other?
6. There is a feature that I consider absolutely necessary (and I haven't found it yet), which is the emitting surface feature, with the ability to stipulate homogeneous intensity with luminance values (in cd/m^2) or flux; and by mapped distribution of intensities or luminances (in cd or cd/m^2).
By emitting surface I don't mean just a flat rectangular plane, such as an area light. It would be absolutely amazing! to perform photometric analysis on irregular and convoluted shapes and the light falling on neighbouring surfaces. 3DS Max with MentalRay provides similar functionality, but without the power of GH + HB.
In the image below, the HB logo is assigned as a texture to a glass which then creates a pattern of that on the wall when daylight falls on it.
ln the image below the light from the Batman logo illumninates the scene.
The images above were Rendered with Radiance. While these things are possible with Radiance, and therefore HB, the reason why they aren't incorporated into the code is that these effects are not "physically based" and are not rooted in reality. Radiance is arguably the most intensively tested and validated lighting simulation software in the world. However, once we start applying such "magic" to it, the results from it are no longer reliable and therefore no different from other photorealistic engines such as V-ray, Mental-Ray etc. …
ulio´s latest bakeAttribute, so it also sets a specified layercolor?
Thanks,
Phillip
Reply by Giulio Piacentino 1 hour ago
Hi Phillip
if possible, you should try to modify layer colors independently from baking. A layer can have only one color, but many objects.
To modify a layer color, use something along these lines:
if(!string.IsNullOrEmpty(layer) && !color.IsEmpty) { int n = RhinoDoc.ActiveDoc.Layers.Find(layer, true); if(n < 0) return; Rhino.DocObjects.Layer l = RhinoDoc.ActiveDoc.Layers[n]; l.Color = color; A = l.CommitChanges(); }
Can I also ask you to start a new discussion next time? I hope this helps,
- Giulio
…
w how. Thanks for that. Now I do have some questions.
1. I am using the area weight tool. I am first calculating the volume of the form. I then multiply that value by it's density. So for concrete I am using 2400 kg/m^3 x volume. I then divided that number by the area of the membrane that is supporting the mass. This gives me my area weight. It seems to be working well but I want to verify that this is the correct workflow. I also want to verify that gravity would be turned off since I am thinking it is already calculated within the weight component.
2. I am finding that the new triangular element tool works much better than trying to use EA/L as input for the springs from mesh. Even when I set the timestep, subiteration, and drag I still have issues with getting very stiff materials to work. On the new finite elements tool I wanted to verify that E was in pascals. I also wanted to ask if I use imperial units can psi be entered. Now from what I am seeing the materials are deforming more than expected and to get less deformation and stretch in the mesh area I am finding the E value needs to be increased more than the true material values. Often I am raising E by a multiple of 10 or 100.
I am going to describe my problem and I will gladly share the definition if you'd prefer looking it over but basically I have an inflated membrane at a certain pressure made of a particular material. I then have a certain volume of concrete on top of the inflated membrane. My goal is to review the displacements as the concrete is applied over the membrane and find the proper pressures to apply to keep it free from deformation. I am including a picture from a project that we used kangaroo on and attempted to deal with such issues. It was a class sponsored by Cloud9 architecture held at Art Center College of Design where I was one of the instructors. Hopefully this illustrates the problem. To summarize any example file that shows the best way to implement real material properties and unit based forces would be a helpful reference and would be greatly appreciated.
…