de modelación en 3D y aprovechen las ventajas que plantean, como mejorar su proceso de diseño y explorar múltiples alternativas para un proyecto en lapsos de tiempo muy reducidos en comparación de los métodos tradicionales.
En consecuencia, los alumnos tendrán la posibilidad de disminuir sus tiempos de trabajo, con resultados iguales o incluso mejores a los que obtenían con anterioridad; mejorar la calidad de sus presentaciones y, lo que es más importante, ampliar la fundamentación de sus proyectos en el aspecto funcional y formal, dependiendo de las características del proyecto.
Para lograr estos objetivos, se contemplan dos temarios y un ejercicio práctico.
Al finalizar el curso, los asistentes serán capaces de manejar Rhinoceros y Grasshopper en un nivel medio, con el objetivo que el alumno pueda continuar aprendiendo con alguno de nuestros siguientes workshops o de manera autodidacta.
Además del contenido teórico se incluye un ejercicio práctico, la magnitud del ejercicio y el material que se le destine se definirán con base en el número de asistentes.
El workshop tiene una duración de cinco sesiones:
Sesión 1 – Temario de Rhinoceros
Sesión 2 y 3 – Temario de Grasshopper
Sesión 4 y 5 – Ejercicio práctico
El horario es de 9 am a 4 pm, con una hora de receso para tomar un refrigerio.
No es necesario traer el equipo necesario para trabajar, se cuenta con un equipo para cada persona asi como el material de trabajo para el ejercicio práctico, por lo cual se les recomienda que no traigan portátiles u otro material, únicamente dispositivos de almacenamiento si desean guardar sus trabajos.
El costo del evento es de $3,500 estudiantes y $4,000 profesionales.
(Para poder tener el descuento de estudiante es necesaria una constancia de la universidad de la que proviene, acreditando que el interesado está cursando algún semestre de la carrera. Personas graduadas que estén cursando una maestría o algún grado superior no reciben el descuento).
Para apartar su lugar pueden realizar un depósito de $1,500 y terminar de efectuar el pago antes del 15 de abril si es mediante un depósito bancario o el primer día del evento en efectivo.
El evento se realizará en las oficinas de Vegasot, ubicadas en Circuito Cirujanos No. 23-A
Cd. Satélite, Naucalpan, Edo. de México 53100
http://www.vegasoft.com.mx
Para cualquier duda por favor escriban un correo a luzytextura@gmail.com, por teléfono al 044 55 4381 3302, o en facebook.com/archbernardorivera…
to incorporating math and geometry in computational design education, Paneling Tools
Marlo Ransdell, PhD Creative Director, at FSU , Digital Fabrication in Design Research and Education
Andy Payne, LIFT architects | Harvard GSD | FireFly
Jay H Song, Chair, Jewelry School of Design, Jewelry as Personal Expression, Extra+Ordinary@Jewelry.com
Pei- Jung (P.J.) Chen, Professor of Jewelry, SCAD
Gustavo Fontana, designer/co-founder nimbistand, Diseñar, desarrollar y comercializar productos por tu cuenta.
Joe Anand, CEO MecSoft Corporation, RhinoCAM
Julian Ossa, Chair, Industrial Design Director, Diseño – Una opción de vida a todo vapor!, UPB
Minche Mena, SHINE Architecture, Principal
J. Alstan Jakubiec, Daylighting and Environmental Performance in Architectural Design Solemma, LLC
Carlos Garnier R&D Director / Jaime Cadena – General Director, Plug Design, www.plugdesign.com.mx
Mario Nakov, www.chaosgroup.com [ V-Ray ]
Andres Gonzalez, RhinoFabStudio
Workshops:
o) Paneling Tools
o) RhinoCAM
o) Rhinology in Design, for Jewelry
o) Footwear
o) V-Ray: Jewelry Design
o) V-Ray: Architects and Industrial Designers
o) FireFly
o) J. Alstan Jakubiec, DIVA
The cost for each workshop or the Lectures is 95.0 US$
To register:
WORK-SHOPS April 2 - RHINO DAY
WORK-SHOPS April 3 - RHINO DAY
REGISTRATION RHINO DAY
NOTE: All students and faculty members that register to this event, will receive a Rhino 5 Educational License at the event.
…
- nickname is rather the best approach - and not on active group, but that's irrelevant anyway).
Step back (assuming that you are talking about the "Tens_from_random_blah_blah" definition):
1. Engineering is the art of demystifying (or we are promising that anyway, he he). This means that you start defining (better: outlining) some topology for things based on some "generic" rules (like the ones applied for the masts,cables,cones etc etc). These things are kept in some kind of structure (Lists, DataTrees etc). Things are few in 99.99999% of cases (i.e. : even the biggest membrane "module" has, say, 20-50 masts per "module").
2. Then ... handling things "individually" (mostly modifying) becomes the most critical part. See this (an x "possible" solution by combining a myriad of "options" : a no cones membrane solution, in plain English):
3. But the above is impossible (for more than obvious reasons). You should deploy masts in some high/low sequence in order to achieve some meaningful convex/concave formation that could work.
4. This "works" : 5. This doesn't:
6. This works partially (the formation at the back is "flat" == undo able):
7. This is utterly kitsch (and faulty as the case6 - the back portion):
So it's quite obvious that without a (quite complex) capability to individually control things (in this occasion : mast heights) the whole definition is a waste of computer time. Additionally the more the solution is "demystified" (some curve is defined, some random points are created, some masts are in place, some cables appear etc etc) the more additional constrains are required in order to "narrow" the possibilities (In plain English : sliders should control other sliders as regards their min/max values, true/false, you/me etc etc).
Remember that we are talking about ONE (mast height) out of a myriad things that you should control "manually" (it's utterly pointless to mastermind some kind of "generic" rules - or use naive attractors etc etc) .You'll see the difference when I'll completely reform the definition by adding individual control upon anything.
PS: what about the blocks? (the real life stuff that actually make any solution possible). Can you imagine a 2nd set of "restrictions" imposed by "a child to his parent"? (Assembly/Component modeling , that is).
more soon
…
uick answers. Below you will find some suggestions, but don't think of them as rules and especially don't think of them as guarantees.
1. Choose a descriptive title for your post
Don't call your question "Help!" or "I have a problem" or "Deadline tonight!", but actually describe the problem you are having.
2. Be succinct but clear in your wording
People need to know some details about your problem in order to understand what sort of answers would satisfy you, but nobody cares about how angry your boss or how bad your teacher or how tight your deadline is. Talk about the problem and only the problem. If you don't speak English well, you should probably post in your native language as well as providing a Google Translation of your question.
3. Attach minimal versions of all the relevant files
If you have a GH/GHX file you have a question about, attach it to the post. Don't expect that people will recreate a file based on a screen-shot because that's a lot of pointless work. It's also a good idea to remove everything non-essential from a GH file. You can use the 'Internalise Data' menu option to cut everything to the left of a parameter:
If you're importing curves or Breps or meshes from Rhino, you can also internalise them so you won't have to post a 3DM file as well as a GH file. If you do attach large files, consider zipping them first. Do not use RAR, Ning doesn't handle it.
It is especially a good idea to post files that don't require any non-standard components if at all possible. Not everyone has Kangaroo or Hoopsnake or Geco installed so if your file relies on those components, it might not open correctly elsewhere.
4. Include a detailed image of the GH file if it makes sense
If your question is about a specific (group of) components, consider adding a screenshot of the file in the text of the post. You can use the Ctrl+Shift+Q feature in Grasshopper to quickly create nice screenshots with focus rectangles such as this:
5. Include links to online resources if possible
If you have a question about Schwarz Minimal surfaces, please link to a website which talks about these.
6. Create new topics rather than continuing old ones
It's usually better to start a fresh question, even if there's already a discussion that kinda sorta tangentially touches upon the same issue. Please link to that discussion, but start anew.
7. This is not a 'do my work for me' group
Many of us like to help, but it's good to see effort on our part being matched by effort on your part. Questions in the form of 'I need to do X but cannot be bothered to try and learn the software' will (and should) go unanswered.
7b. Similarly, questions in the form of 'How do I quickly recreate this facade that took a team of skilled professionals four months to figure out?' have a very low success rate.
--
David Rutten
Lead Grasshopper Development
Robert McNeel & Associates…
Added by David Rutten at 12:58pm on October 1, 2013
Data matching is a problem without a clean solution. It occurs when a component has access to differently sized inputs. Imagine a component which creates line segments between points. It will have…
then passed to the file3dm.Write() Method when it's used? Turns out it will work in the Visual Studio IDE perfectly well like this, Now I'm just sorting out the best way to create a surface.
If I can ask one more question, what does file.Polish() do?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using Rhino.Geometry;
using Rhino.FileIO;
using Rhino.Collections;
using Rhino;
namespace NurbsExample
{
class Program
{
static void Main(string[] args)
{
string output = "C:/WorkingFileExample.3dm";
RunScript(output);
}
private static void RunScript(string path)
{
File3dm file = new File3dm();
file.Polish();
for (int j = 0; j<=10; j++)
{
file.Objects.AddLine(new Line(j, 0, 5 - j, 5 + j, 0, j));
}
File3dmWriteOptions options = new File3dmWriteOptions();
options.SaveAnalysisMeshes = false;
options.SaveRenderMeshes = false;
options.SaveUserData = true;
file.Write(path, options);
}
}
}…
Added by Henry Jarvis at 6:33am on October 7, 2015
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
ntación en distintos procesos del Diseño. Se abordaran los conceptos basicos y la metodologia para abordar problemas de diseño a traves del desarrollo de Herramientas Algorítmicas mediante un proceso de programacion visual.
Como nuestras herramientas de trabajo se utilizara Rhinoceros+Grasshopper+Wea verBird
Instructor: Leonardo Nuevo Arenas[Complex Geometry]
Fechas: 5 y 6 de Noviembre 2011
Lugar: Sebastian Bach 5411, Col. La Estancia, Zapopan Jalisco.http://g.co/maps/nc7g6
Cupo: Limitado a 10 plazas
Costo:
Profesionistas: $3,300.00
Estudiantes: $2,800.00
Fecha limite de pago: Viernes 28 de Octubre
Importante:
Los participantes deberán traer su propia Laptop con todo el software y actualizaciones (originales o versiones de demostración oficiales) previamente instaladas. (Se fijara una fecha unos días antes para revisar que todos los equipos estén en orden y listos para trabajar). Si planeas venir de fuera de la ciudad contactanos y te pondremos en contacto con otras personas que también vayan a hacerlo para en caso de desearlo puedan compartir su lugar de estancia.
Contacto:
Complex Geometry
Leo[33 3956 9209]
[nuarle@msn.com]
FARA.Architectural Lab
Aye[33 1050 3482]
[ayeritza.fara@gmail.com]
Para hacer tu pago via deposito o transferencia electronica:
Banamex
No. Cta. 6035264
Sucursal. 0644
CLABE interbancaria: 002671064460352648
Beneficiario: Leonardo Nuevo Arenas
Al hacer el movimiento bancario favor de enviarnos el comprobante (scanner del boucher o captura de pantalla de la transferencia) a los correos de contacto que aparecen mas arriba.
http://cgeometry.blogspot.com/…