of stuff. Then it works either with ExoW (black mesh) or IntraLattice (blue mesh).
That said ExoW is tricky: occasionally reports engulfing issues and stops playing the game. For instance in this (diagonal) anchor mode and with some U/V random values:
Whilst IntraLattice appears rather less temperamental:
The other def is more complex and works using the Proximity approach that makes more sense with regard random 3d line graphs (as an exercise: Add a gate and use IntraLattice as Plan B).
best
…
to Daniel Pikers' Tutorial mesh relaxation tutorials we are already pretty far.
The Idea of our design is a hanging structure suspendend in a gap between buildings, where you can find places to rest, read or even to sleep. You can find privacy in the cocoons, that are connecting the planes with each other.
As structure we have a net in mind, that is tighter in the area of the cocoons and more transparent in the common areas, but we really don't know whats the right way to get to this point.
In the end of the project we need a printable geometry. We start our boxy design in Sketchup, and remesh it in Rhino. After that we feed it in our kangaroo definition.
1. A nurbs surface could give us more freedom (for postprocessing in tsplines) to form meshes with shorter and longer edges, representing our net. But I see now easy way to get a surface out of the relaxed kangaroo mesh.
2. Working with the kangaroo mesh could also work fine, if we'd find a way to control the edge length of the mesh (for example 20 cm in the common area and 5 in the privates) with an attractor point. Remeshing with Daniel's Plankton Plugin sadly doesn't work, I always get the "runaway faces circulator"-error.
3. It woud be great to convert the mesh to a hexagonal mesh, but I don't know any possibility to remesh an existing one...
You see, we're full of questions, but I really hope to get some help here :)
Agostino & Johanna
…
nd improvements. Many of the new features and components announced in the last release have become stable and have emerged from their WIP section. Additionally, after two years of work, we are happy to announce that we finally have full support of an OpenStudio connection within Honeybee, which has ushered in a whole host of new features, notably the modelling of detailed HVAC systems. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
LADYBUG
1 - Solar Hot Water Components Out of WIP
After much beta-testing, bug-fixing, and general development, all of the Photovoltaic and Solar Hot Water components are now fully out of WIP! The main component is based on a Chengchu Yan's publication. Components have been added to Ladybug thanks to the efforts of Chengchu Yan and Djordje Spasic.. See Djorje’s original release post of the solar hot water components for more information on the components that just made it out of WIP.
2 - New Terrain Shading Mask Released in WIP
In addition to Djordje’s prolific addition of renewable energy components, he has also contributed a widely-useful component to generate terrain shading masks, which account for the shading of surrounding mountains/terrain in simulations. While initially added to assist the solar radiation radiation and renewable energy components, the component will undergo development to optimize it for energy and daylight simulations over the next few months. Another new component called Horizon Angles can be used to visualize and export horizon angles. You can test them out now by accessing them in the WIP section. For more information, see Djordje’s release post on the GH forum here.
3 - New Mesh Selector Component
After realizing that the Optimal Shade Creator component has applications to a whole range of analyses, it has now been re-branded as the Mesh Selector and has been optimized to work easily with these many analyses. Specifically, the component selects out the portion of a mesh that meets a given threshold. This can be the portion of a shade benefit analysis meeting a certain level of shade desirability, the portion of a radiation study meeting a certain level of fulx, the portion of a daylight analysis meeting a certain lux threshold, and much more!
4 - Solar Adjusted Temperature Now Includes Long Wave Radiation
Thanks to a question asked by Aymeric and a number of clarifications made by Djordje Spasic, the Solar Adjusted Temperature component now includes the ability to account for long-wave radiative loss to the sky in addition to it original capability to account for short wave radiation from the sun. As such, the component now includes all capabilities of similar outdoor comfort tools such as RayMan. The addition of this capability is also paralleled by the addition of a new horizontalInfraredRadiation output on the ImportEPW component. See the updated solar adjusted example file hereto see how to use the component properly.
5 - Support for both Log and Power Law Wind Profiles
In preparation for the future release of the Butterfly CFD-modelling insect, the Ladybug Wind Profile component now includes the option of either power law or log law wind profiles, which are both used extensively in CFD studies. Thanks goes to Theodoros Galanos for providing the formulas!
6 - New Radiant Asymmetry Comfort Components
Prompted by a suggestion from Christian Kongsgaard, Ladybug now includes components to calculate radiant asymmetry discomfort! For examples of how to use the components see this example file for spatial analysis of radiant asymmetry discomfort and this example for temporal analysis.
7 - Pedestrian Wind Comfort Component Released in WIP
In preparation for the impending release of the butterfly CFD-modelling insect, Djordje Spasic with assistance from Liam Harrington has contributed a component to evaluate outdoor discomfort and pedestrian safety. The component identifies if certain areas around the building are suitable for sitting, building entrances-exits, window shopping... based on its wind microclimate. Dangerous areas due to high wind speeds are also identified.You can check it out now in the WIP section.
HONEYBEE
1 - New HVAC Systems and Full OpenStudio Support
After a significant amount of development on the part of the OpenStudio team and two years of effort on the part of LB+HB developers, we (finally!) have full support for an OpenStudio connection within Honeybee. By this, we mean that any energy simulation property that can be assigned to a HBZone will be taken into account in the simulation run by the OpenStudio component. The connection to OpenStudio has brought with it several new capabilities. Most notably, you can now assign full HVAC systems and receive energy results in units of electricity and fuel instead of simple heating and cooling loads. This Honeybee release includes 14 built-in HVAC template systems that can be assigned to the zones, each of which can be customized:
0. Ideal Air Loads 1. PTAC | Residential 2. PTHP | Residential 3. Packaged Single Zone - AC 4. Packaged Single Zone - HP 5. Packaged VAV w/ Reheat 6. Packaged VAV w/ PFP Boxes 7. VAV w/ Reheat 8. VAV w/ PFP Boxes 9. Warm Air Furnace - Gas Fired 10.Warm Air Furnace - Electric 11.Fan Coil Units + DOAS 12.Active Chilled Beams + DOAS 13.Radiant Floors + DOAS 14.VRF + DOAS
Systems 1-10 are ASHRAE Baseline systems that represent much of what has been added to building stock over the last few decades while systems 11-14 are systems that are commonly being installed today to reduce energy use. Here is an example file showing how to assign these systems in Honeybee and interpret the results and here is an example showing how to customize the HVAC system specifications to a wide variety of cases. To run the file, you will need to have OpenStudio installed and you can download and install OpenStudio from here.
In addition to these template systems within Honeybee, the OpenStudio interface includes hundreds of HVAC components to build your own custom HVAC systems. OpenStudio also has a growing number of user-contributed HVAC system templates that have been integrated into a set of scripts called "Measures" that you can apply to your OpenStudio model within the OpenStudio interface. You can find these system templates by searching for them in the building components library. Here is a good tutorial video on how to apply measures to your model within the OpenStudio interface. Honeybee includes a component that runs these measures from Grasshopper (without having to use the OpenStudio interface), which you can see a demo video of here. However, this component is currently in WIP as OpenStudio team is still tweaking the file structure of measures and it is fairly safe to estimate that, by the next stable release of Honeybee, we will have full support of OpenStudio measures within GH.
2 - Phasing Out IDF Exporter
With the connection to OpenStudio now fully established, this release marks the start of a transition away from exporting directly to EnergyPlus and the beginning of Honeybee development that capitalizes on OpenStudio’s development. As such THIS WILL BE THE LAST STABLE RELEASE THAT INCLUDES THE HONEYBEE_RUN ENERGY SIMULATION COMPONENT.
The Export to OpenStudio component currently does everything that the Run Energy Simulation component does and, as such, it is intended that all GH definitions using the Run Energy Simulation component should replace it with the OpenStudio component. You can use the same Read EP Result components to import the results from the OpenStudio component and you can also use the same Energy Sim Par/Generate EP Output components to customize the parameters of the simulation. The only effective difference between the two components is that the OpenStudio component enables the modeling of HVAC and exports the HBZones to an .osm file before converting it to an EnergyPlus .idf.
For the sake of complete clarity, we should state that OpenStudio is simply an interface for EnergyPlus and, as such, the same calculation engine is under the hood of both the Export to OpenStudio component and the Run Energy Simulation component. At present, you should get matching energy simulation results between the Run Energy Simulation component and a run of the same zones with the OpenStudio component (using an ideal air system HVAC).
All of this is to say that you should convert your GH definitions that use the Run Energy Simulation component to have the OpenStudio component and this release is the best time to do it (while the two components are supported equally). Additionally, with this version of Honeybee you will no longer need to install EnergyPlus before using Honeybee and you will only need to install OpenStudio (which includes EnergyPlus in the install).
3 - New Schedule Generation Components
Thanks to the efforts of Antonello Di Nunzio, we now have 2 new components that ease the creation of schedule-generation in Honeybee. The new components make use of the native Grasshopper “Gener Pool” component to give a set of sliders for each hour of the day. Additionally, Antonello has included an annual schedule component that contains a dictionary of all holidays of every nearly every nation (phew!). Finally, this annual schedule component can output schedules in the text format recognized by EnergyPlus, which allows them to be written directly into the IDF instead of a separate CSV file. This will significantly reduce the size of files needed to run simulations and can even reduce the number of components on your canvas that are needed to add custom schedules. For more information, see Antonello’s explanatory images here and Antonello's example file here. You can also see a full example file of how to apply the schedules to energy simulations here.
4 - EnergyPlus Lookup Folder, Re-run OSM/IDF, and Read Result Dictionary
With the new capabilities of OpenStudio, we have also added a number of components to assist with managing all of the files that you get from the simulation. In particular, Abraham Yezioro has added a Lookup EnergyPlus Folder component that functions very similarly to the Lookup Daylight Folder component. This way, you can run an Energy simulation once and explore the results separately. Furthermore, we have added components to Re-Run OpenStudio .osm files or EnergyPlus .idf files within Grasshopper. These components are particularly useful if you edit these .osm or .idf files outside of Honeybee and want to re-run them to analyze their results in Grasshopper. Lastly, a component has been added to parse the .rdd (or Result Data Dictionary) file that EnergyPlus produces, enabling you to see all of the possible outputs that you can request from a given simulation.
5 - Electric Lighting Components Out of WIP
After Sarith Subramaniam’s initial components to model electric lights with Radiance in the last release, we are happy to report that they have been fully tested and are out of WIP. Improvements include support for all types of light fixture geometries and the ability to use the components in a more “Grasshoppery” list-like fashion. See Sarith’s original release post for more information and several example files showing how to use the components can be found here. 1 , 2 , 3 .
6 - Improvements to THERM Components
A number of bug fixes and improvements have been made to the THERM components in order to make their application more flexible and smooth. Special thanks is due to Derin Yilmaz , Mel King , Farnaz , Ben (@benmo1) , and Abraham Yezioro for all of the great feedback in the process of improving these components.
7 - HBObject Transform Components
After some demand for components that can ease the generation of buildings with modular zone types, two components to transform HBObjects with all of their properties have been added to the 00 | Honeybee section. The components allow you to produce copies of zones that are translated or rotated from the original position.
8 - Comfort Maps Supports PET and Integration of CFD Results
Thanks to the addition of the ‘Physiological Equivalent Temperature’ (PET) component by Djordje Spasic in the last stable release, it is now possible to make comfort maps of PET with Honeybee. PET is particularly helpful for evaluating OUTDOOR comfort with detailed wind fields at a high spatial resolution. As such, the new PET recipe has also been optimized for integration with CFD results. The windSpeed_ input can now accept the file path to a .csv file that is organized with 8760 values in each column and a number of columns that correspond to the number of test points. Components to generate this csv from Butterfly CFD results will be coming in later releases. Stay tuned!
As always let us know your comments and suggestions.
Enjoy!Ladybug Analysis Tools Development Team
…
Here it the RhinoScript that I am using:
'Option Explicit
'Rem Script written by Giulio
'Rem Script version lunes, 10 de noviembre de 2008 21:00:00
'Rem This script is licenced to you under the conditions shown at
'Rem http://www.giuliopiacentino.com/this/
Call Main()
Sub Main()'starts command
Dim arrLfStart(),arrRxStart(), arrLfEnd(), arrRxEnd(), arrLinks(), i 'sets intergers
Dim links: links = 36 'number of cylinders (links)
ReDim arrLfStart(links), arrRxStart(links), arrLfEnd(links), arrRxEnd(links), arrLinks(links) 'combines integer with number
Dim angleDist:angleDist = Rhino.PI / 10
For i=0 To links 'sets integer
'The following sets the path
arrLfStart(i) = Array(Cos(i-angleDist)*3 + Cos(i*12)*12, Sin(i-angleDist)*3 + Sin(i*12)*12, i*5)
arrRxStart(i) = Array(Cos(i+angleDist)*3 + Cos(i*12)*12, Sin(i+angleDist)*3 + Sin(i*12)*12, i*5)
arrLfEnd(i) = Array(-Cos(i-angleDist)*3 + Cos(i*12)*12, -Sin(i-angleDist)*3 + Sin(i*12)*12, i*5)
arrRxEnd(i) = Array(-Cos(i+angleDist)*3 + Cos(i*12)*12, -Sin(i+angleDist)*3 + Sin(i*12)*12, i*5)
'The following adds cylindars according to specified points
Call Rhino.AddCylinder(IntraPts(arrLfStart(i), arrRxStart(i), 0.5), IntraPts(arrLfEnd(i), arrRxEnd(i), 0.5), 0.5)
Next
'The following adds surfaces to the path
Call Rhino.AddLoftSrf(Array(Rhino.AddInterpCurve(arrLfStart), Rhino.AddInterpCurve(arrRxStart)))
Call Rhino.AddLoftSrf(Array(Rhino.AddInterpCurve(arrLfEnd), Rhino.AddInterpCurve(arrRxEnd)))
End Sub
Function IntraPts(byRef p1, byRef p2,byRef n)
'Rem This function gives the first point out if you use n=0,
'Rem with n=1 it gives the second point.
IntraPts = Array( p1(0)*(1.0-n)+p2(0)*n, p1(1)*(1.0-n)+p2(1)*n, p1(2)*(1.0-n)+p2(2)*n )
End Function
I know that the script works in RhinoScript. If anyone could help me out I would appreciate it.…
Added by Adam Smith at 1:57pm on September 9, 2010
hat, in accordance with this stable release, I have posted an updated version of this outdoor microclimate map example to the same link:
http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Outdoor_Microclimate_Map
1. You will see that, in the new file, I now have a single component that is able to turn a zone into a "ground zone" (similar to a plenum). To clarify, both the plenum and ground zone components set all of the loads of the zone to 0 (no internal heat gain). So this means that any of the characteristics of the default office program will be negated. From your comments, Grasshope, it seems that you understand that the reason why I have a ground zone defined in this model is to account for the variation in ground surface temperatures that can occur with different objects casting shade onto the ground. Therefore, the key property that defines this zone is the construction of the top surfaces, which is now changed based on a number that you input into the Ground Zone component.
2. You are correct in understanding the need for both "set zone construction" components in the old file. Because of the zone's position below the Rhino model origin, the walls and floor are defined as underground surfaces and so I need the extra "Set EP Ground Construction" component. Admittedly, the constructions on the underground surfaces should have a minimal effect on the modeling of the surface temperature above the zone (the roof construction is most important) but it made sense to me that results would be more accurate by setting all of the constructions of the zone to the ground material. The current Ground Zone component ensures that all surfaces of the zone are assigned the ground material construction. It also ensures that all walls and floor surfaces have a ground boundary condition regardless of where they sit in relation to the rhino model origin.
3. The distFromFlrOrSrf input can take either a number representing the distance from the floor of zones at which you would like to build a microclimate map or any surface on which you would like to see temperature variation. So the input is flexible and allow you to both build micro-climate maps quickly or take a longer time building them with more customization. For a visual of what you can do by inputting surfaces into this component, see this thermal animation of a section through a building that I designed for my thesis:
https://www.youtube.com/watch?v=WJz1Eojph8E&list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A&index=3
For an example of a file using a numerical input for the microclimate map, see here:
http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map
4. The component has since been renamed (sometime in early July) to be called "Honeybee_Microclimate Map Analysis". Originally, I developed the component to help me understand thermal diversity within zones but realized after building it out that the same method could be used to give deeper understandings of the outdoor environment. So, at present, it can do both indoor and outdoor microclimate maps. The only shortcoming at present is that the outdoor microclimate map uses EnergyPlus's oversimplified means of accounting for outdoor wind (a simple wind profile that does nto account for obstructions). This shortcoming will be addressed once the first stable release of butterfly is out or I manage to work in components into LB that use the botlzman lattice particle collision method to approximate outdoor wind speeds. Other than this shortcoming, you can trust that all results you are getting from these components are to a high degree of accuracy (meaning that all air temperature and MRT values are accurate).
5. Thanks for pointing this out. This is a mistake in my labeling of the file names and I will fix this before the end of today. When you use the workflow with the PMV recipe, these values are actual PMV/PPD values. When you use the Adaptive comfort recipe, these values are "degrees from neutral temperature" and "Comfortable Or Not" values. When you use the workflow with the UTCI recipe, these values are also "degrees from neutral temperature" and "Comfortable Or Not" values but they are different for UTCI than they are for the adaptive model. Specifically, the neutral temperature and comfort zone for UTCI is defined to be the same as it is in this publication:
https://www.ipma.pt/en/enciclopedia/amb.atmosfera/index.bioclima/index.html?page=utci.xml
Hope this helps and let me know if you have any more questions,
-Chris…
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
occur more than once in the same list, and different elements with identical values can occur more than once. Also, a list may contain lack of elements, referred to as "nulls".
Sets. Strictly speaking a Set is a mathematical construct which adheres to a strict collection of rules and limitations. Basically, a Set is the same as a List, with the exception that it cannot contain the same element more than once, or indeed two or more different elements with the same values. You see, in mathematics there is no difference between a value and an instance of that value, they are the same thing. In programming however it is possible to store the number 7 in more than one spot in the RAM. Grasshopper does not enforce this rule very strongly though, you can use a lot of Set components on lists that have multiple occurrences of the same value. The big difference between Lists and Sets in Grasshopper is that Sets are only defined for simple data types that have trivial equality comparisons. Basically: booleans, integers, numbers, complex numbers, strings, points, vectors, colours and intervals. Lists can contain all kinds of data.
Strings. Strings are text. There's nothing more to it. I don't know why early programmers chose to call them strings, but I suppose it's a better description of the memory representation of them. Strings are essentially sequences of individual characters.
Trees. Trees are the way all data is stored in Grasshopper. Even when you only have a single item, it will still be stored in a tree. A tree is a sorted collection of lists, where each list is identified by a path. A specific path can only occur once in a tree, when you merge two trees together, lists with identical paths are appended to each other. Trees are an attempt to losslessly represent not just the data itself, but also the history of that data. Imagine you have 4 curves {A,B,C,D} and you divide each into 3 points {X,Y,Z}. Then, for each of those points you create a new line segment {X',Y',Z'} and then divide each of those line segments again into 5 points each {K,L,M,N,O}. The way data is stored in trees, it should be possible to figure out whether a point M belongs to X' or to Z', and whether that X' or Z' came from A, B, C or D. This is why paths are often quite long after a while, because they encode a lot of history.
Paths. A Path is nothing more than a list of integers. It's denoted using curly brackets and semi-colons: {A;B;...;Z}. A Path should never be empty {} or have negative integers {0;-1}, but it is certainly possible to create a path like this and it probably won't even crash Grasshopper. Paths are 'grown' by components that (potentially) create more than one output value for a single input value. For example Divide Curve. It creates N points for every single input curve. In cases like this a new integer is appended to the end of the path.
In the next release the Path logic in Grasshopper is somewhat different. I fixed a number of obscure bugs (hopefully without introducing new fresh bugs) and special cased certain operations to somewhat reduce the speed at which paths grow. This may well break files that rely on a specific tree layout, but I hope the temporary sacrifice will be worth the long-term benefits.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
si à faire le tri avec Grasshopper et l'outil Points in Brep, comme je pensais. Je suis passé d'environ 400 000 points à uniquement 20 000 points autour de mes 3 rails. C'est très efficace (mais un peu dangereux avec tous ces points).
J'ai interdit au composant CircleFit de faire un cercle, s'il n'y a pas au moins 5 points présents sur la section. Car lorsqu'il y a seulement 3 ou 4 points, il suffit qu'il y en ait un pour que le cercle soit faux, alors qu'au delà, le cercle a plus de chance d'être "bon".
J'ai également créé des "Pipe" (créés à partir de portions de l'axe) au lieu des "Box » de sélection des points pour éviter de sélection trop de points que ne serait pas des points du rail.
J'ai ensuite créé des « panel » pour la moyenne des distances en X et en Y et la moyenne des distances centre à centre.
Tout cela fonctionne bien avec un axe et un tuyau. Mais maintenant j'essaie d'appliquer ça à plusieurs rails en même temps. Je crois avoir compris qu'il faut créer des « path » dans l'imput manager, et faire correspondre le « path » de l'axe et celui du Tuyau.
Dans mon exemple j’ai mis 3 courbes et 21 sections. Au moment où j'utilise les boîtes pour créer les portions des axes, il crée 63 « sous-path » de 1 courbe alors qu'il faudrait qu'il crée 3 "paths" de 21 courbes, enfin si j'ai bien compris.
Car une fois qu’il a créé les points à l’intérieur des « Pipe », il doit les projeter sur les plans correspondant. Et c’est là que le problème se voit. Il ne fait pas correspondre les points à projeter et les plans.
Je vous envoie la version à une courbe et un tuyau (c’est la v5 avec un fichier rhino ou la courbe d'axe est "bakée" pour pouvoir faire un zoom sur la zone plus rapidement) et je vous envoie également, celle avec 3 courbes et 3 tuyaux. Sachant qu’il faudra également attribuer un rayon pour un des tuyaux et un autre rayon pour les deux autres.
Tout ça est bien compliqué, j’espère que je ne vous embête pas trop.
Merci d’avance.…
hit Commit.
I'm wondering how hard it would be to have an edit box which shows the
number the user could click inside of then type in a new number, then
hit enter. :)
2) How would I go about using one line from a table and assign each
field to a variable? Then, move a slider or something and use the values
from the next row?
background: I'm recreating elbows, Tees, and other fittings using
paramatric scripts, then baking and exporting them. Here's one source
table, http://www.wardfittings.com/Assets/PDFs/0902CatalogColorOld.pdf
page 5, the uniform elbows.
Current Setup: the attached ghx file. Create a point at 0,5,0 in a blank
document with units set to inches, then assign that point to the top
left 'Center Pnt' in the ghx file.
Current workflow:
a) Modify variables A, B, H, and Nominal Dia to match one line from the
table in the linked PDF file, page 5, table of regular elbows.
b) Select the 'Nodes' and 'Surfaces' with a drag box
c) Click 'Bake'
d) Switch to Rhino window, do the 'sellast' command.
e) Drag baked objects along Y axis so the center point is at 0,0,0
f) Run 'Join'
g) Run 'Cap'
h) set the 'node' points to a layer called 'nodes'
i) set the surface to a layer called 'fit-3d'.
j) select the surfaces and nodes
k) export selected
This elbow that I'm doing only has 12 rows, so doing it the above method
doesn't take THAT long. I'm also going to be doing a couple with larger
tables like the Tee on page 8, and in other spec files. As you can
imagine, entering in EACH value into a slider is a bit tedious.
I'd love to take the pdf table, run it through an OCR program to convert
to excel, modify the headers so the ghx script knows what they are, then
paste it into grasshopper, or save it and have grasshopper read it, and
I be able to move a slider or something to to select one line at a time.
Has anyone done something similar? ie: assigned one row in a table to a
predefined set of variables, each variable coming from one field in the row?
Thanks for taking the time to read this message. :)
I'm making a rhino script to do steps d-k, so that part will be much faster.
-Suthern…
the other pluggins again, I doubt that problems arise and if I already have them Which are due to the autodesk pluggins that I can install on another computer or mount a virtual machine, but I doubt it, I simply had to install Grasshopper first and then the rest.)
Problem:
Good day, afternoon or night, please help I can not install the Grasshopper plugin 0.9.76.0 in Rhinoceros 5SR13, I do not know if it is because I uninstalled the version of 32 Bit of Rhinoceros and I only have installed the 64 Bit version, I have installed on Rhinoceros 64 Bit:
Autodesk Realtime Renderer 2014 x64 Autodesk Shape Modeling 2014 x64 Autodesk T-Splines 2015 x64 V-Ray 2.00.23938 for Rhinoceros 5 x64 V-Ray Express 2 for Rhinoceros 5
I would infinitely appreciate the resolution to this problem, for the moment I can not think of anything other than to uninstall everything and leave only installed the program Rhinoceros 5SR13 with Grasshopper 0.9.76.0 and nothing more.
I already tried to download another new file from Grasshopper 0.9.76.0, which ruled out that this installer is wrong, what I could do is look for another version of Rhinoceros but I have the newest one or one of the newest versions: Rhino_5.13.60913.21340_x86_x64_Multi. Exe
I understand that the Grasshoper installer is showing me a message where it says there is a Win32 exception where the system can not find the source file, what I do not know is if this exception has to do with the Windows C /: Folder: Windows, subfolder: System32 or I do not know if it refers to that as I do not have the 32 bit version of Rhinoceros maybe the installer gets confused and generates the installation error exception.
Another thing to which the exception is associated is the start process file: Start.nfo or start information.
There is also a programming argument for file upload errors of boolean operations (geometry operators) associated with the platform operating system, a process called child process.
Also appears another note that says the installed package of a plugin called inspector and I do not know what else I can not explain.
I do not know what to do, I just happen to uninstall and install everything and I do not think the Rhinoceros installer has any errors, I have Windows 10 edition of Red Stone 1 of 64 Bit.
Thanks and if anyone had this problem and solved it please tell me how to fix it or if someone knows about programming you can tell me why all those errors or exceptions are.
Greetings, have a nice day, afternoon or night wherever you step or stand or wherever you are sitting or lying down.…